Assembly of Pickering emulsions using milled starch particles with different amylose/amylopectin ratios

Green fabrication of hierarchical pore starch with controllable pore size and shape based on different amylose-amylopectin ratios

Porous starch (PS) was widely prepared for its large effective surface area, pore volume, and superior hydrophilic property, but its application is limited by enzyme and chemical use. In this study, a novel method to prepare PS with controllable hierarchical pores through ultrasound-ethanol precipitation and different amylose-amylopectin ratios is proposed. As shown in porous morphology and parameters, there were macropores, mesopores and micropores in the formed PS. Moreover, we found that the content of amylose (AM) was negatively related with the total pore volume and pore diameter in PS. The different surface tensions created through ethanol evaporation and water migration during oven drying are the main mechanisms of forming pores with controllable sizes. Based on the molecular information and the long-/short-range orders reflected by crystalline pattern, lamellas, and single-/double-helices, we conclude that AM is easier to form V-type inclusion complexes with ethanol. More single helix of V-amylose was transformed from B-type polymorph after ethanol exchange, which had significantly broadened dLozentz in PS. The TG spectra proved that the novel PS has the stable thermodynamic property. Overall, the finding of an objective regular between AM and pore sizes of PS in this study may support the other work related to PS.

Highly Bioadaptive Scaffolds with Tuned Porous Structure Templated by Xylan Nanocrystal High Internal Phase Pickering Emulsions

Fabrication of traditional 3D cell culturing scaffolds requires synthetic polymers or additives, posing a risk of poor biocompatibility and low biodegradability. Pickering emulsions stabilized by biobased nanomaterials can be used as templates to produce scaffolds with facile tunable porous structure, excellent cytocompatibility, and biodegradability. In this study, very stable high internal phase Pickering emulsions (HIPPE) with an oil content of 80% were successfully prepared by xylan hydrate nanocrystals (XNC). The HIPPE can exist stably for more than 30 days, exhibiting a high viscosity. By adding cellulose nanofibers (CNF) and removing the oil phase, scaffolds with a tuned porous structure and enhanced cell culturing ability were successfully fabricated. In the HIPPE templated scaffolds with XNC/CNF, XNC plays a major role in stabilizing the emulsions, while CNF improves the mechanical properties of the scaffolds, both of which are vital to the successful fabrication of the scaffolds. Compared with non-HIPPE templated scaffolds, the HIPPE templated scaffold had a higher porosity and a higher median pore size. The HIPPE templated scaffold was able to maintain 80% cell activity and showed an excellent cytocompatibility. The HIPPE templated scaffolds consisting of XNC and CNF demonstrate great potential in 3D cell culturing for medical purpose.

Thermal stability and in vitro digestive behavior of Pickering emulsion stabilized by high-amylose starch nanocrystals

In this study, high-amylose starch (HAS) was processed using sulfuric acid-ultrasonic cross-linking to produce high-amylose starch nanocrystals (HASNC). These nanocrystals were used to stabilize Pickering emulsions and assess their effectiveness in encapsulating β-carotene. Normal starch nanocrystals (NSNC) were prepared similarly for comparison. The HASNC retained key HAS properties, such as heat and enzyme resistance, providing several advantages to HASNC-stabilized emulsions. First, after exposure to 100 °C heat and in vitro tests simulating the mouth and stomach, the HASNC-stabilized emulsions demonstrated significantly greater stability and higher β-carotene retention compared to the NSNC-stabilized emulsions. This enhanced stability is attributed to the lower gelatinization degree and increased resistance to α-amylase hydrolysis of HASNC, which provides stronger steric stabilization of the oil droplets. Second, during in vitro small intestine tests, the greater enzyme resistance of HASNC allowed for the formation of a denser barrier around the oil droplets, effectively preventing lipase and bile salts from contacting the oil droplets. This led to a reduced rate and extent of lipid digestion and facilitated a sustained-release effect. Consequently, HASNC, as a starch-based emulsifier, show great potential as an effective delivery system for the sustained release of bioactive compounds.

Exploring effect of uniform dry ball-milling duration on pasting and rheological properties of pink potato and maize starch mixtures

This study examined the potential effect of ball milling on maize starch (MS), pink potato starch (PPS), and their blends in various ratios (90:10, 80:20, and 70:30) on the pasting and rheological properties. Ball-milling led to changes in the particle size, ranging from 652.9 to 6488 nm, and a decrease in relative crystallinity (RC), as confirmed by XRD. Ball-milling increased amylose concentration in blend with the ratio of 90:10 up to 32.53 %, indicating structural alterations and molecular interactions. FESEM analysis confirms significant changes in the surface and particle sizes and starch gels with honeycomb structures. FTIR and Raman spectroscopy revealed a decrease in the intensity of the 1044 cm-1 and 480 cm-1 bands, respectively, signifying structural changes. Pasting parameters like peak viscosity and gelatinization behavior varied with PPS incorporation. The 80:20 blend had the highest viscosity, demonstrating PPS's capacity for high-viscosity starch paste. Rheological measurements of starch blends exhibited shear-thinning behavior, whereas the viscoelastic properties of the blends are influenced by particle size and the ratio of pink potato starch. Ball-milling treatment affects the granules and causes molecular-level interactions between the particles. This results in unique rheological properties of the starch blends, making them suitable for various applications.

Bottom-Up Synthesized Glucan Materials: Opportunities from Applied Biocatalysis

Linear d-glucans are natural polysaccharides of simple chemical structure. They are comprised of d-glucosyl units linked by a single type of glycosidic bond. Noncovalent interactions within, and between, the d-glucan chains give rise to a broad variety of macromolecular nanostructures that can assemble into crystalline-organized materials of tunable morphology. Structure design and functionalization of d-glucans for diverse material applications largely relies on top-down processing and chemical derivatization of naturally derived starting materials. The top-down approach encounters critical limitations in efficiency, selectivity, and flexibility. Bottom-up approaches of d-glucan synthesis offer different, and often more precise, ways of polymer structure control and provide means of functional diversification widely inaccessible to top-down routes of polysaccharide material processing. Here the natural and engineered enzymes (glycosyltransferases, glycoside hydrolases and phosphorylases, glycosynthases) for d-glucan polymerization are described and the use of applied biocatalysis for the bottom-up assembly of specific d-glucan structures is shown. Advanced material applications of the resulting polymeric products are further shown and their important role in the development of sustainable macromolecular materials in a bio-based circular economy is discussed.

Effect of starch-based emulsion with different amylose content on the gel properties of Nemipterus virgatus surimi

The emulsion was prepared with peanut oil and corn starch with different amylose content using high-speed homogenization assisted high-pressure homogenization, and the effect of starch-based emulsion on the gel properties, whiteness, microstructure, protein secondary structure, chemical forces, texture and sensory properties of Nemipterus virgatus surimi was investigated. The results showed that high amylose corn starch was more beneficial to the stability of emulsion than normal and waxy starch. The gel strength, water holding capacity and texture properties of surimi were significantly improved by adding 10 % waxy corn starch-based emulsion or 15 % high amylose or normal corn starch-based emulsion. Moreover, the whiteness of surimi gel containing starch-based emulsion was higher, and the microstructure was more compact and delicate than that of surimi without emulsion. The addition of starch-based emulsion could increase the hydrophobic interaction and disulfide bond content, and promote the transformation of protein secondary structure to irregular direction. The sensory properties such as color, texture, taste and overall acceptability could be improved to varying degrees. Therefore, starch-based emulsion could be used to enhance the gel properties and nutritional value of surimi products.

Dry Ball-Milled Quinoa Starch as a Pickering Emulsifier: Preparation, Microstructures, Hydrophobic Properties and Emulsifying Properties

This research supplied a "cleaner-production" way to produce "clean-label" quinoa starch-based Pickering emulsifier with excellent emulsifying properties. The effects of dry ball-milling time and speed on the multi-scale structures and emulsifying properties of quinoa starch were studied. With increasing ball-milling time and speed, particle size first decreased and then increased, the crystallinity, lamellar structure and short-range ordered structure gradually decreased, and contact angle gradually increased. The increased contact angle might be related to the increased oil absorption properties and the decreased water content. The emulsification properties of ball-milled quinoa starch (BMQS)-based Pickering emulsions increased with the increase in ball-milling time and speed, and the emulsions of BMQS-4 h, 6 h, 8 h, and 600 r reached the full emulsification state. After 120 days' storage, the oil droplets of BMQS-2 h (BMQS-400 r) deformed, the oil droplets increased, and the emulsification index decreased. The emulsification index and the oil droplets of BMQS-4 h, 6 h, 8 h and 600 r-based emulsions did not show obvious changes after storage, indicating the good emulsifying stability of these BMQS-based emulsions, which might be because that the relatively larger amount of starch particles that dispersed in the voids among the oil droplets could act as stronger network skeletons for the emulsion gel. This Pickering emulsifier was easily and highly efficiently produced and low-cost, having great potential to be used in the food, cosmetic and pharmaceutical industries.

Media-milled agar particles as a novel emulsifier for food Pickering emulsion

Pickering emulsions was successfully fabricated using ball-milled agar particles with sizes and sulfate content around 7 μm and 0.62 %, respectively. These particles were obtained through a simple media-milling process using agar powders initially sized at 120 μm. The lamellated agar is aggregated into a mass after the milling process. The surface charge and hydrophobicity of the ball-milled agar particles were characterized through zeta potential and contact angle measurements, respectively. The droplet size of Pickering emulsions was related to oil fraction and particle concentration, ranging from approximately 45 μm to 80 μm. Ball-milled agar stabilized emulsions were sensitive to pH and salt conditions. The results of confocal laser scanning microscopy and cryo-SEM showed that at low particle concentrations and oil fractions, ball-milled agar stabilized the emulsions by dispersing particles on the surface of the oil droplets through electrostatic repulsion. Conversely, ball-milled agar stabilized the emulsions under high particle concentrations and oil fractions by forming a gel network structure to bind the oil droplets. In this research, this developed method provides the basis for the high-value application of agar and a new idea for preparing stable food-grade Pickering emulsion-based functional foods using raw-food material without surface wettability.

The effect of non-thermal physical modification on the structure, properties and chemical activity of starch: A review

Non-thermal physical treatments has obvious advantages in regulating the structure and properties of starch compared with chemical treatment. Hance, this article summarized and compared the effects of three kinds of non-thermal physical treatments including grinding and ball milling, high hydrostatic pressure and ultrasonic on the structure, properties and chemical activity of starches from different plants. The potential applications of non-thermal physical modified starch were introduced. And strategies to solve the problems in the current research were put forward. It is found that although starch has a dense structure, the starch granules could be deformed under three kinds of non-thermal physical treatments, which could damage the granule morphology, microstructure, and crystal structure of starch, reduce particle size, increase solubility and swelling power, and promote starch gelatinization. Three kinds of non-thermal physical treated starch could be used as flocculant thickener, starch based edible films and fat substitutes. Non-thermal physical treatments caused the structure of starch to undergo three stages, which were similar to mechanochemical effects. When starch was in the stress stage and the transition stage from aggregation to agglomeration, its active sites significantly increase and move inward, ultimately leading to a significant increase in the chemical activity of starch.

The research advance of resistant starch: structural characteristics, modification method, immunomodulatory function, and its delivery systems application

Resistant starch, also known as anti-digestion enzymatic starch, which cannot be digested or absorbed in the human small intestine. It can be fermented in the large intestine into short-chain fatty acids (SCFAs) and metabolites, which are advantageous to the human body. Starches can classify as rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS), which possess high thermal stability, low water holding capacity, and emulsification characteristics. Resistant starch has excellent physiological functions such as stabilizing postprandial blood glucose levels, preventing type II diabetes, preventing intestinal inflammation, and regulating gut microbiota phenotype. It is extensively utilized in food processing, delivery system construction, and Pickering emulsion due to its processing properties. The resistant starches, with their higher resistance to enzymatic hydrolysis, support their suitability as a potential drug carrier. Therefore, this review focuses on resistant starch with structural features, modification characteristics, immunomodulatory functions, and delivery system applications. The objective was to provide theoretical guidance for applying of resistant starch to food health related industries.

Clove Essential Oil Pickering Emulsions Stabilized with Lactoferrin/Fucoidan Complexes: Stability and Rheological Properties

Although studies have shown that lactoferrin (LF) and fucoidan (FD) can be used to stabilize Pickering emulsions, there have been no studies on the stabilization of Pickering emulsions via the use of LF-FD complexes. In this study, different LF-FD complexes were obtained by adjusting the pH and heating the LF and FD mixture while using different mass ratios, and the properties of the LF-FD complexes were investigated. The results showed that the optimal conditions for preparing the LF-FD complexes were a mass ratio of 1:1 (LF to FD) and a pH of 3.2. Under these conditions, the LF-FD complexes not only had a uniform particle size of 133.27 ± 1.45 nm but also had good thermal stability (the thermal denaturation temperature was 110.3 °C) and wettability (the air-water contact angle was 63.9 ± 1.90°). The concentration of the LF-FD complexes and the ratio of the oil phase influenced the stability and rheological properties of the Pickering emulsion such that both can be adjusted to prepare a Pickering emulsion with good performance. This indicates that LF-FD complexes represent promising applications for Pickering emulsions with adjustable properties.

Starch physical treatment, emulsion formation, stability, and their applications

Pickering emulsions are increasingly preferred over typical surfactant-based emulsions due to several advantages, such as lower emulsifier usage, simplicity, biocompatibility, and safety. These types of emulsions are stabilized using solid particles, which produce a thick layer at the oil-water interface preventing droplets from aggregating. Starch nano-particles (SNPs) have received considerable attention as natural alternatives to synthetic stabilizers due to their unique properties. Physical formulation processes are currently preferred for SNP production since they are environmentally friendly procedures that do not require the use of chemical reagents. This review provides a thorough overview in a critical perspective of the physical processes to produce starch nano-particles used as Pickering emulsion stabilizers, fabricated by a 2-step process. Specifically, the reviewed physical approaches for nano-starch preparation include high hydrostatic pressure, high pressure homogenization, ultrasonication, milling and antisolvent precipitation. All the essential parameters used to evaluate the effectiveness of particles in stabilizing these systems are also presented in detail, including the hydrophobicity, size, and content of starch particles. Finally, this review provides the basis for future research focusing on physical nano-starch production, to ensure the widespread use of these natural stabilizers in the ever-evolving field of food technology.

Ball-milling: A sustainable and green approach for starch modification

Ball-milling is a low-cost and green technology that offers mechanical actions (shear, friction, collision, and impact) to modify and reduce starch to nanoscale size. It is one of the physical modification techniques used to reduce the relative crystallinity and improve the digestibility of starch to their better utility. Ball-milling alters surface morphology, improving the overall surface area and texture of starch granules. This approach also can improve functional properties, including swelling, solubility, and water solubility, with increased energy supplied. Further, the increased surface area of starch particles and subsequent increase in active sites enhance chemical reactions and alteration in structural transformations and physical and chemical properties. This review is about current information on the impact of ball-milling on the compositions, fine structures, morphological, thermal, and rheological characteristics of starch granules. Furthermore, ball-milling is an efficient approach for the development of high-quality starches for applications in the food and non-food industries. There is also an attempt to compare ball-milled starches from various botanical sources.

Characterization of Pickering emulsion by SCFAs-modified debranched starch and a potent for delivering encapsulated bioactive compound

The Pickering emulsion was prepared by short-chain fatty acids (SCFAs) esterified debranched starch. The microstructure, particle size distribution, rheological properties and stability of the emulsions showed that the introduction of acyl groups improved the ability of starch to stabilize the emulsions, in which the butyrylated starch with longer acyl side chains exhibited higher emulsifying ability compared to acetylated and propionylated starches. Pickering emulsions stabilized with butyrylated starch as stabilizer have better stability after 30 days of storage. The particle size distribution of SCFAs-esterified starch emulsions with enzymatic debranching pretreatment was more concentrated and the droplet size was further reduced, which improved the instability factors such as flocculation, agglomeration or Ostwald ripening of emulsions induced by conventional SCFAs-esterified emulsions and further improved the stability of SCFAs-esterified emulsions. More importantly, butyrylated starch (with or without debranched pretreatment) emulsions exhibited smaller and more uniform droplet shapes and higher curcumin encapsulation efficiency (EE%) in SCFAs-esterified starch emulsions, and the EE% of curcumin in debranched butyrylated starch emulsion increasing from 10.04 % in native starch emulsions to 50.70 %.

Starch Nanoparticles: Preparation, Properties and Applications

Starch as a natural polymer is abundant and widely used in various industries around the world. In general, the preparation methods for starch nanoparticles (SNPs) can be classified into 'top-down' and 'bottom-up' methods. SNPs can be produced in smaller sizes and used to improve the functional properties of starch. Thus, they are considered for the various opportunities to improve the quality of product development with starch. This literature study presents information and reviews regarding SNPs, their general preparation methods, characteristics of the resulting SNPs and their applications, especially in food systems, such as Pickering emulsion, bioplastic filler, antimicrobial agent, fat replacer and encapsulating agent. The aspects related to the properties of SNPs and information on the extent of their utilisation are reviewed in this study. The findings can be utilised and encouraged by other researchers to develop and expand the applications of SNPs.

Emulsifiers from White Beans: Extraction and Characterization

This paper studies the emulsification capacity of aqueous extracts from white beans and reports the relations between the composition and structure of the extracts’ macromolecular components and their exerted emulsification ability. The extracts comprise of three distinct populations: one of large (few MDa) polysaccharides, proteins (tens of kDa), and smaller molecular entities (oligopeptides and oligosaccharides, polyphenols, and salts, among other molecules); the proteins and the smaller molecules adsorb onto oil–water interfaces, providing some emulsification capacity at pH 3 and adequate emulsification at pH 7. Unabsorbed polysaccharides, such as starch, cause depletion flocculation. Pickering phenomena are involved in the stabilization mechanism. The findings are supported by SEC–MALLS/UV, confocal microscopy, zeta potential measurements, and FT–IR data. A discussion is made on the particular attributes of each population in emulsion stability, on their relevance to culinary practice, and in their potential as replacers of artificial emulsifiers.

Polysaccharide-based nanosystems: a review

Polysaccharide-based nanosystem is an umbrella term for many areas within research and technology dealing with polysaccharides that have at least one of their dimensions in the realm of a few hundreds of nanometers. Nanoparticles, nanocrystals, nanofibers, nanofilms, and nanonetworks can be fabricated from many different polysaccharide resources. Abundance in nature, cellulose, starch, chitosan, and pectin of different molecular structures are widely used to fabricate nanosystems for versatile industrial applications. This review presents the dissolution and modification of polysaccharides, which are influenced by their different molecular structures and applications. The dissolution ways include conventional organic solvents, ionic liquids, inorganic strong alkali and acids, enzymes, and hydrothermal treatment. Rheological properties of polysaccharide-based nano slurries are tailored for the purpose functions of the final products, e.g., imparting electrostatic functions of nanofibers to reduce viscosity by using lithium chloride and octenyl succinic acid to increase the hydrophobicity. Nowadays, synergistic effects of polysaccharide blends are increasingly highlighted. In particular, the reinforcing effect of nanoparticles, nanocrystals, nanowhiskers, and nanofibers to hydrogels, aerogels, and scaffolds, and the double network hydrogels of a rigid skeleton and a ductile substance have been developed for many emerging issues.

Egg Yolk-Free Vegan Mayonnaise Preparation from Pickering Emulsion Stabilized by Gum Nanoparticles with or without Loading Olive Pomace Extracts

The yolk-free mayonnaise was formed by Pickering emulsions stabilized by free and encapsulated olive pomace extracts (OPEs) in rocket seed [rocket seed gum nanoparticle (RSGNP)] and chia seed gum nanoparticles at different nanoparticle concentrations. The yolk-free mayonnaise and the control mayonnaise samples were compared in terms of appearance, microstructural, droplet size, emulsion stability, rheological, oxidative stability, and sensory properties. The droplet size decreased by increasing the nanoparticle concentration in yolk-free mayonnaise samples. The yolk-free mayonnaise samples prepared with OPE-loaded gum nanoparticle showed shear-thinning, solid-like and recoverable characteristics, which increased as the increase in the nanoparticle concentration. The emulsion stability and capacity increased by increasing the nanoparticle concentration in the yolk-free mayonnaise samples. OPE-loaded gum nanoparticle-stabilized yolk-free mayonnaise samples exhibited higher IP (induction period) values than the control samples. OPE-RSGNP 1% mayonnaise was observed to be the closest sample to the control sample with its sensory properties, general acceptability, and similar microstructural and rheological properties. The results of this study indicated that Pickering emulsions stabilized by gum nanoparticles could be used as healthy alternatives to the egg yolk in conventional mayonnaise.

Pickering emulsion hydrogel based on alginate-gellan gum with carboxymethyl chitosan as a pH-responsive controlled release delivery system

Pickering emulsion hydrogels (PEHs) were developed as a pH-responsive, controlled-release delivery system to address the limitations of Pickering emulsions in some harsh processing or gastrointestinal conditions. Specifically, the PEHs were fabricated based on alginate and various concentrations of gellan gum (GG) with carboxymethyl chitosan (CMCS) matrix. The encapsulation efficiency (EE), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results proved the successful encapsulation. Furthermore, the hydrogels remained stable in the presence of destabilizing ions (Na⁺ or phosphate ions) and high osmotic pressure mediums. The texture profile analysis (TPA) characteristics and Young's modulus of the 0.8 % GG (w/v) PEHs were superior to the others. The PEHs prevented the emulsions from being released at pH 2.0, while the emulsions were entirely released at pH 7.4 in vitro, with the rate of release controlled by CMCS and the degree by GG concentration. This work facilitates the delivery of Pickering emulsions with excellent stability and pH-responsive controlled release for hydrophobic actives in food applications.

Physical and 3D Printing Properties of Arrowroot Starch Gels

This paper aims to investigate the physical and 3D printing properties of arrowroot starch (AS), a natural biopolymer with many potential health benefits. Scanning electron microscopy images showed that AS granules had mixed spherical and elongated geometries, with average sizes of 10.5 ± 2.5 μm. The molecular weight of AS measured by gel permeation chromatography (GPC) was 3.24 × 10⁷ g/mol, and the amylose/amylopectin ratio of AS was approximately 4:11. AS has an A-type crystal structure, with a gelatinization temperature of 71.8 ± 0.2 °C. The overlap concentration (C*) of AS in aqueous solutions was 0.42% (w/v). Temperature-dependent dynamic rheological analyses of 10% to 30% (w/v) AS fluids showed that the storage modulus (G’) reached the maximum values around the gelatinization temperatures, while the yield stress (τ_y) and flow stress (τ_f) values all increased with the increase in AS concentration. The printing accuracy of AS gels was found to be associated with the interplay between the G’ values and the restorability after extrusion, determined by the three-interval thixotropy tests (3ITT). The optimum 3D printing condition occurred at 20% (w/v) AS, the nozzle diameter of 0.60 mm, the printing speed of 100 mm/s and the extrusion speed of 100 mm/s. Our research provides a promising biopolymer to be used in the design of novel personalized functional foods.

Effect of Amylose and Crystallinity Pattern on the Gelatinization Behavior of Cross-Linked Starches

Starches from normal maize (NM), normal potato (NP), waxy maize (WM), and waxy potato (WP) were cross-linked with seven different concentrations (0.01, 0.05, 0.1, 0.5, 1, 5, 10%) of sodium trimetaphosphate and sodium tripolyphosphate. The use of low-amylose WM and WP as well as A-crystalline maize and B-crystalline potato starches can determine the influence of the amylose content and crystallinity pattern on the cross-linking of starches. The results showed that the viscosity of the cross-linked starch (CLs) first increased and then deceased, and finally no viscosity was detected; WM showed no viscosity at 5% and NP at 1%. In addition, the viscosity of NM first increased and then became undetectable at 0.5%. Strikingly, the WP developed viscosity even at a 10% reagent level (RL), and it developed the highest viscosity of all samples at 1%. The starch-iodine method was a facile and high-performance method for the characterization of the cross-linking degree (CL%), having been applied to normal starches, because the increase in the CL% resulted in a decrease of iodine-complexed amylose and blue intensity. In this study, the starch-iodine method was extended to waxy starches, which stained brown with iodine, and the brown intensity decreased with the increase of the CL%. Moreover, the CL% and RL showed a linear-log relationship.

Microcapsules with slow-release characteristics prepared by soluble small molecular starch fractions through the spray drying method

The utilization of starch in the food and medical industry can be facilitated by using new non-chemical methods to make starch the only wall material to encapsulate microcapsules. In this study, soluble small molecular fraction obtained from corn starch by gelatinization and centrifugation methods and commercial soluble starch were used independently to encapsulate oil under the condition that wall material and core material were 2:1. Molecular weight of these starch fractions was measured firstly. The peak molecular weight of the soluble small molecular fraction of corn starch and commercial soluble starch was 3.537 × 105 Da and 2.720 × 104 Da, respectively. Basic physicochemical characteristics and application characteristics of the microcapsules were then characterized and compared. The soluble small molecular fraction of corn starch encapsulated microcapsule and the commercial soluble starch encapsulated microcapsule had high encapsulation efficiency (higher than 88%), high boiling water solubility (higher than 74%), high rehydration stability (higher than 2 h). Most importantly, the encapsulated oil of these microcapsules could be slowly released under the action of α-amylase and amyloglucosidase. Overall, both the soluble small molecular fraction of corn starch and commercial soluble starch could be used as microcapsule wall materials and might have great application potential in food and medicine.

Understanding the aggregation structure, digestive and rheological properties of corn, potato, and pea starches modified by ultrasonic frequency

Corn starch (CS), potato starch (PtS), and pea starch (PS) were modified by ultrasonic frequency (codes as UFCS, UFPtS and UFPS), and changes in aggregation structure, digestibility and rheology were investigated. For UFCS, the apparent amylose content and gelatinization enthalpy (∆H) decreased, while the R1047/1022 values and relative crystallinity (RC) increased under lower ultrasonic frequencies (20 kHz and 25 kHz). For UFPtS, the apparent amylose content, R1047/1022 values and RC increased, while the ∆H decreased under a higher ultrasonic frequency (28 kHz). For UFPS, the apparent amylose content, R1047/1022 values, RC, ∆H decreased at 20 kHz, 25 kHz and 28 kHz. Cracks were observed on the surface of UFCS, UFPtS and UFPS. These aggregation structure changes increased the resistant starch content to 31.11% (20 kHz) and 26.45% (25 kHz) for UFCS and to 39.68% (28 kHz) for UFPtS, but decreased the resistant starch content to 18.46% (28 kHz) for UFPS. Consistency coefficient, storage modulus, and loss modulus of UFCS, UFPtS and UFPS increased, while the flow behavior index and damping factor decreased. Results indicated that CS, PtS and PS had diverse digestion and rheology behaviors after ultrasonic frequency modification, which fulfilled different demands in starch-based products.

Recent progress on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles

Pickering emulsions stabilized by micro/nanoparticles have attracted considerable attention owing to their great potential in various applications ranging from cosmetic and food industries to catalysis, tissue engineering and drug delivery. There is a growing demand to design "green" micro/nanoparticles for constructing stable Pickering emulsions. Micro/nanoparticles derived from the naturally occurring polysaccharides including cellulose, chitin, chitosan and starch are capable of assembling at oil/water interfaces and are promising green candidates because of their excellent biodegradability and renewability. The physicochemical properties of the micro/nanoparticles, which are determined by the fabricating approaches and/or post-modification methods, have a significant effect on the characteristics of the final Pickering emulsions and their applications. Herein, recent advances on Pickering emulsions stabilized by polysaccharides-based micro/nanoparticles and the construction of functional materials including porous foams, microcapsules and latex particles from these emulsions as templates, are reviewed. In particular, the effects of micro/nanoparticles properties on the characteristics of the Pickering emulsions and their applications are discussed. Furthermore, the obstacles that hinder the practical applications of polysaccharides-based micro/nanoparticles and Pickering emulsions as well as the prospects for the future development, are discussed.

Highly Stable Pickering Emulsions with Xylan Hydrate Nanocrystals

Xylan is a highly abundant plant-based biopolymer. Original xylans in plants are in an amorphous state, but deacetylated and low-branched xylan can form a crystalline structure with water molecules. The utilizations of xylan have been limited to bulk applications either with inconsistency and uncertainty or with extensive chemical derivatization due to the insufficient studies on its crystallization. The applications of xylan could be greatly broadened in advanced green materials if xylan crystals are effectively utilized. In this paper, we show a completely green production of nano-sized xylan crystals and propose their application in forming Pickering emulsions. The branches of xylan were regulated during the separation step to controllably induce the formation of xylan hydrate crystals. Xylan hydrate nanocrystals (XNCs) with a uniform size were successfully produced solely by a mild ultrasonic treatment. XNCs can be adsorbed onto oil-water interfaces at a high density to form highly stable Pickering emulsions. The emulsifying properties of XNCs were comparable to some synthetic emulsifiers and better than some other common biopolymer nanocrystals, demonstrating that XNCs have great potential in industrial emulsification.

Engineering miscellaneous particles from media-milled defatted walnut flour as novel food-grade Pickering stabilizers

Media milling, an efficient and organic solvent-free method without the use of chemical modification, has been developed to engineer novel walnut-based miscellaneous colloidal particles. The defatted walnut flour particles (DWFPs), which were prepared by a novel continuous phase transition extraction method operated under low temperature (i.e., 50-65 °C) followed by 6-h media milling, were spherical shape with an average size of 753.0 ± 27.8 nm. These particles were mainly composed of proteins (55.6 ± 0.2 wt%) and carbohydrates (24.0 ± 0.2 wt%) and demonstrated the ability to form a gel-like network structure in Pickering emulsions (PEs). The visual observation and confocal laser scanning microscopy (CLSM) showed that the PE droplets stabilized by DWFPs had a good stability over a prolonged storage time (i.e., 3-month storage). Increasing particle concentration (c) in aqueous phase led to the increased emulsified phase volume, decreased oil droplet sizes, and increased storage moduli G' for the viscoelastic responses. As the oil volume fraction (ϕ) increased, the emulsified phase volume fraction and droplet size increased while their rheological properties shifted from fluid-like to gel-like behaviors. The method developed in this study is significant in value-added utilization of walnut products and provides a new insight into facile fabrication of stable food-grade Pickering emulsions-based functional foods using miscellaneous particle stabilizers from walnut extracts.

A comprehensive review of the factors influencing the formation of retrograded starch

The retrogradation of starch is an inevitable change that occurs in starchy food during processing and storage, in which gelatinized starch rearranges into an ordered state. The chain length, proportion and structure of amylose and amylopectin vary in different types of starch granules, and the process is affected by the genes and growth environment of plants. The internal factors play a significant role in the formation of retrograded starch, while the external factors have a direct impact on its structural rearrangement, and the creation of suitable conditions enables food components to affect the rearrangement of starch. Interestingly, water not only directly affects the gelatinization and retrogradation of starch, but also serves as a bridge to deliver the influence of other components that influence retrogradation. Moreover, there are three mechanisms responsible for forming retrograded starch: the migration of starch molecular chains in the starch-water mixed system, the redistribution of water molecules, and the recrystallization kinetics of gelatinized starch. In this paper, the effects of internal factors (amylose, amylopectin, food ingredients) and external factors (processing conditions) on the formation of retrograded starch and the mechanism controlling these effects are reviewed.

Insights into the multiscale structure and pasting properties of ball-milled waxy maize and waxy rice starches

The effects of ball-milling on the pasting properties of waxy maize starch (WMS) and waxy rice starch (WRS) were investigated from a multiscale structural view. The results confirmed that ball-milling significantly destroyed the structures of the two waxy starches (especially WMS). Specifically, ball-milling led to obvious grooves on the surface of starch granules, a decrease in crystallinity and the degree of short-range order, and a reduction in double-helix components. Meanwhile, small-angle X-ray scattering results indicated that the semicrystalline lamellae of starch were disrupted after ball-milling. Ball-milling decreased the pasting temperatures. Furthermore, ball-milled starches exhibited lower peak and breakdown viscosity and weakened tendency to retrogradation. These results implied that ball-milling induced structural changes in starch that significantly affected its pasting properties. Hence, ball-milled starch may serve as food ingredients with low pasting temperature and paste viscosity as well as high paste stability under heating/cooling and shearing.