Gelation properties and thermal gelling mechanism of golden threadfin bream myosin containing CaCl2 induced by high pressure processing

Microwave-induced heterogeneity in protein conformation and water mobility interferes with the distribution pattern and migration pathway of sodium ion in myofibrillar protein gel

The aim of this study was to investigate the distribution pattern and migration pathway of sodium ion in the myofibrillar protein (MP) gel matrix during microwave heating. The results showed that the content of sodium ions in the outer layer of MP gel increased by 47.85% compared with that in the inner layer. In the inner layer of protein gel, the non-covalent disulfide bonds (mainly ε(γ-Glu)-Lys) increased (P < 0.05), which contributed to the formation of a better rigid structure of the protein. The free water content was significantly higher than that of the inner layer (P < 0.05), which was related to the higher mobility of sodium ions. The results of microstructure analysis showed that the outer layer of the MP gel formed a more porous network than the inner layer. This work is expected to give some insights into the development of promising salt-reduced meat products by microwave heating.

Ca2+-promoted free radical grafting of whey protein to EGCG: As a novel nanocarrier for the encapsulation of apigenin

Whey protein (WP) is often used as a delivery carrier due to its superior biological activity and nutritional value. Covalent binding of WP to epigallocatechin gallate (EGCG) can significantly improve the performance of WP in encapsulated materials. Nevertheless, the preparation of WP-EGCG covalent complexes still suffers from low grafting rates. Studies have shown that calcium ions (Ca2+) can modify the structure of proteins. We therefore explored the effect of calcium chloride (CaCl2) on the free radical grafting of EGCG and WP. The experimental results showed that the grafting rate of free radicals increased by 17.89% after adding Ca2+. Furthermore, the impact of WP-EGCG-Ca2+ covalent complex on the entrapment efficiency of apigenin (AP) was further examined, and the results revealed that the entrapment rate could reach 93.66% at an apigenin concentration of 0.2 mg/mL. Simulated gastrointestinal digestion showed that WP-EGCG-Ca2+ covalent complex could significantly improve the bioavailability of AP. The study provides new ideas to broaden the application of WP as a carrier for delivering bioactive substances.

Preparation of bovine serum albumin-arabinoxylan cold-set gels by glucono-δ-lactone and salt ions double induction

In order to investigate the effect of glucono-δ-lactone (GDL) and different salt ions (Na+ and Ca2+) induction on the cold-set gels of bovine serum albumin (BSA)-arabinoxylan (AX), the gel properties and structure of BSA-AX cold-set gels were evaluated by analyzing the gel strength, water-holding capacity, thermal properties, and Fourier Transform Infrared (FTIR) spectra. It was shown that the best gel strength (109.15 g) was obtained when the ratio of BSA to AX was 15:1. The addition of 1 % GDL significantly improved the water-holding capacity, gel strength and thermal stability of the cold-set gels (p < 0.05), and the microstructure was smoother. Low concentrations of Na+ (3 mM) and Ca2+ (6 mM) significantly enhanced the hydrophobic interaction and hydrogen bonding between BSA and AX after acid induction, and the Na+-induced formation of a denser microstructure with a higher water-holding capacity (75.51 %). However, the excess salt ions disrupted the stable network structure of the cold-set gels and reduced their thermal stability and crystalline structure. The results of this study contribute to the understanding of the interactions between BSA and AX induced by GDL and salt ions, and provide a basis for designing hydrogels with different properties.

Constructing gellan gum/konjac glucomannan/wheat fiber composite hydrogel to simulate edible cartilage by ionic cross-link and moisture regulation

The utilization of non-animal-derived materials to imitate cartilage is critical for the advancement of plant-based simulated meat. In this study, gellan gum (GG), konjac glucomannan (KGM), and wheat fiber (WF) were used to construct hydrogel, and the mechanical strength, water properties, and microstructure were regulated by constructing Ca2+ cross-links and moisture control. The hardness, chewiness, resilience, shear force, and shear energy of the Ca2+ cross-linked samples were significantly improved. Extrusion dehydration further changes the related mechanical properties of the hydrogel and results in a tighter microstructure. The findings suggest that the establishment of Ca2+ cross-links and water regulation are efficacious techniques for modifying the texture of the GG/KGM/WF composite hydrogel. Correlation analysis and sensory evaluation showed that the test indexes and sensory scores of the samples with Ca2+ crosslinking and 80 % moisture content were similar to chicken breast cartilage, and the samples with Ca2+ crosslinking and 70 % moisture content were similar to pig crescent bone. This study presents a framework for designing edible cartilage simulators using polysaccharide hydrogels, with implications for enhancing the resemblance of plant-based meat products to real meat and expanding the range of vegetarian offerings available.

Low-frequency alternating magnetic field and CaCl2 influence the physicochemical, conformational and gel characteristics of low-salt myofibrillar protein

In this study, the improvement mechanism of low-frequency alternating magnetic field (LF-AMF, 5 mT, 3 h) combined with calcium chloride (CaCl2, 0-100 mM) on the gel characteristics of low-salt myofibrillar protein (MP) was investigated. LF-AMF combined with 80 mM CaCl2 treatment increased solubility (32.71%), surface hydrophobicity (40.86 μg), active sulfhydryl content (22.57%), water-holding capacity (7.15%). Besides, the combined treatment decreased turbidity, particle size and intrinsic fluorescence strength of MP. Fourier transform infrared spectroscopy (FT-IR) results indicated that the combined treatment altered the secondary structure of MP by increasing β-sheet and β-turn, and reducing α-helix and random coil. The combined treatment also induced a high G' value and shortened T2 relaxation time for forming a homogeneous and compact gel structure. These results revealed that LF-AMF combined CaCl2 treatment could as a potential approach for modifying the gel characteristics of low-salt MP.

Effect of magnetic field mediated CaCl2 on the edible quality of low-sodium minced pork gels

Magnetic field combined with calcium chloride (CaCl2,) treatment is a highly promising technique for reducing sodium chloride (NaCl) in meat. Therefore, this paper investigated the effect of reducing NaCl addition (0-10%) by CaCl2 in combination with a magnetic field (3.8 mT) on the edible quality of low-salt pork mince. It is desired to drive the application of magnetic field and CaCl2 in low-sodium meat processing in this way. Results showed that the cooking yield, color, hardness, elasticity, mouthfeel, apparent texture, and orderliness of protein conformation of all minced pork were improved as compared to the control group, while the electron nose response values of their volatile sulfides and nitrogen oxides were decreased. In particular, the best edible quality and perceived salty intensity of minced pork gel was obtained by using CaCl2 in place of 5% NaCl under magnetic field mediation. In addition, energy dispersive X-ray spectroscopy scans showed that the reduced NaCl treatment by magnetic field combined with CaCl2 could increase the signal intensity of sodium in minced pork matrices to some extent. Magnetic field-mediated substitution of NaCl for CaCl2 treatment was also found to be favorable for inducing the transition of the protein secondary structure from an irregularly coiled to a β-folded structure (demonstrated by infrared spectroscopy). In short, magnetic fields combined with CaCl2 instead of NaCl was a highly promising method of producing low-NaCl meats.

Effects of calcium chloride on the gelling and digestive characteristics of myofibrillar protein in Litopenaeus vannamei

In this study, the effects of CaCl2 (0, 25, 50, 75, and 100 mM) on the gelling and digestive properties of the myofibrillar protein (MP) in Litopenaeus vannamei were investigated. The results showed that increasing CaCl2 concentration led to changes in the tertiary structure of MP. Specifically, compared with the control group, a 64.31 % increase in surface hydrophobicity and a 45.90 % decrease in the sulfhydryl group were observed after 100 mM CaCl2 treatment. Correspondingly, the water holding capacity and strength of the MP gel increased by 24.46 % and 55.99 %, respectively. These changes were positively correlated with the rheological properties, microstructure pore size, and content of non-flowable water. The mechanical properties of MP gel were improved, and the microstructure became more compact with the increase in CaCl2 concentration. Furthermore, the particle size of the digested MP gels decreased in the presence of CaCl2, which improved the digestion characteristics of MP gels.

Preparation, Optimization, and Characterization of Bovine Bone Gelatin/Sodium Carboxymethyl Cellulose Nanoemulsion Containing Thymol

The aim of this study is to produce a biodegradable food packaging material that reduces environmental pollution and protects food safety. The effects of total solids content, substrate ratio, polyphenol content, and magnetic stirring time on bovine bone gelatin/sodium carboxymethylcellulose nanoemulsion (BBG/SCMC-NE) were investigated using particle size, PDI, turbidity, rheological properties, and zeta potential as evaluation indexes. The micro, structural, antioxidant, encapsulation, and release properties were characterized after deriving its optimal preparation process. The results showed that the nanoemulsion was optimally prepared with a total solids content of 2%, a substrate ratio of 9:1, a polyphenol content of 0.2%, and a magnetic stirring time of 60 min. SEM showed that the nanoemulsion showed a dense and uniform reticulated structure. FTIR and XRD results showed that covalent cross-linking of proteins and polysaccharides altered the structure of gelatin molecular chains to a more compact form but did not change its semi-crystalline structure. DSC showed that the 9:1 BBG/SCMC-NE had a higher thermal denaturation temperature and greater thermal stability, and its DPPH scavenging rate could reach 79.25% and encapsulation rate up to 90.88%, with excellent slow-release performance. The results of the study provide basic guidance for the preparation of stable active food packaging with excellent properties.

Ultra-high pressure improved gelation and digestive properties of Tai Lake whitebait myofibrillar protein

This study investigated the effects of ultra-high pressure (UHP) at different levels on the physicochemical properties, gelling properties, and in vitro digestion characteristics of myofibrillar protein (MP) in Tai Lake whitebait. The α-helix gradually unfolded and transformed into β-sheet as the pressure increased from 0 to 400 MPa. In addition, the elastic modulus (G') and viscous modulus (G'') of the 400 MPa-treated MP samples increased by 4.8 and 3.8 times, respectively, compared with the control group. The gel properties of the MP also increased significantly after UHP treatment, e.g., the gel strength increased by a 4.8-fold when the pressure reached 400 Mpa, compared with the control group. The results of in vitro simulated digestion showed that the 400 MPa-treated MP gel samples showed a 1.8-fold increase in digestibility and a 69.6 % decrease in digestible particle size compared with the control group.

Study on the interaction and gel properties of pork myofibrillar protein with konjac polysaccharides

BACKGROUND

Natural myofibrillar protein (MP) is sensitive to changes in the microenvironment, such as pH and ionic strength, and therefore can adversely affect the final quality of meat products. The aim of this study was to modify natural MP as well as to improve its functional properties. Therefore, the quality improvement effect of konjac polysaccharides with different concentrations (0, 1.5, 3, 4.5 and 6 g kg-1 protein) on MP gels was investigated.

RESULTS

With a concentration of konjac polysaccharides of 6 g kg-1 protein, the composite gel obtained exhibited a significant improvement of water binding (water holding capacity increased by 7.71%) and textural performance (strength increased from 29.12 to 37.55 N mm, an increase of 8.43 N mm). Meanwhile, konjac polysaccharides could help to form more disulfide bonds and non-disulfide covalent bonds, which enhanced the crosslinking of MP and maintained the MP gel network structure. Then, with the preservation of α-helix structure (a significant increase of 8.11%), slower protein aggregation and formation of small aggregates, this supported the formation of a fine and homogeneous network structure and allowed a reduction in water mobility.

CONCLUSION

During the heating process, konjac polysaccharides could absorb the surrounding water and fill the gel system, which resulted in an increase in the water content of the gel network and enhanced the gel-forming ability of the gel. Meanwhile, konjac polysaccharides might inhibit irregular aggregation of proteins and promote the formation of small aggregates, which in turn form a homogeneous and continuous gel matrix by orderly arrangement. © 2023 Society of Chemical Industry.

L-histidine-assisted ultrasound improved physicochemical properties of myofibrillar proteins under reduced-salt condition - Investigation of underlying mechanisms

The effects of the L-hisdine (L-His)-assisted ultrasound on physicochemical characteristics and conformation of myofibrillar protein (MP) under reduced-salt condition were investigated using spectroscopic analysis, and the binding mechanism between L-His and MP was further elucidated through molecular docking and molecular dynamics (MD) simulations. UV second derivative spectra and intrinsic Try fluorescence spectra revealed that L-His formed a complex with MP and altered the microenvironment of MP. After L-His-assisted ultrasound treatment, MP showed smaller particle size, higher solubility, and more uniform atomic force microscopy image due to the decrease of α-helix content and the subsequent increase in zeta potential, active sulfhydryl content, and surface hydrophobicity. Molecular docking and MD simulations demonstrated the optimal docking pose (minimum binding affinity of -6.78 kcal/mol) and revealed hydrophobic interactions and hydrogen bonds as the main interaction forces between L-His and MP, with several residues (ILE-464, ILE-480, THR-483, ASN-484, GLY-466, ASP-463, PHE-246) identified as binding sites.

Elucidating the molecular mechanism of water migration in myosin gels of Nemipterus virgatus during low pressure coupled with heat treatment

The relationship between myosin denaturation, aggregation and water migration in Nemipterus virgatus myosin gels with different treatment processes under optimal low pressure coupled with heat treatment was investigated to clarify the molecular mechanism of water migration. With the different treatment processes, the proportion of bound water of the myosin gels increased significantly (P < 0.05). Denaturation of myosin S1 sub-fragments and α-helical unfolding during different treatment processes led to an increase in β-sheets content. These promote increased exposure of Try residues and hydrophobic groups of myosin, formation of clathrate hydrates, and reduced mobility of bound water. Furthermore, hydrophobic interactions and disulfide bonds caused the head-head and head-hinge to coalesce into a 3D honeycomb network with greater fractal dimension, less lacunarity, smaller water hole diameter and more water holes. This increased the capillary pressure experienced by the bound water, causing immobile water to migrate towards the bound water. The present study may be necessary to improve the mechanism of water migration in protein gel systems and to promote the industrial application of high pressure processing technology in surimi-based foods.

Study on the mechanism of soy protein isolate to improve quality of reduced-salt Hypophthalmichthys molitrix surimi gel: Focus on gel quality, protein structure, and in vitro digestibility

Excessive intake of sodium chloride may bring a series of diseases; as a result, reduced-salt surimi gels have gained growing popularity for sodium reduction. This paper studied soy protein isolate (SPI, 2.0%, 4.0%, and 6.0%, w/w) as a gel enhancer for reduced-salt silver carp surimi. Compared with the control (2.0% NaCl), the addition of SPI significantly increased (P < 0.05) the total SH content, hydrophobic interaction force, disulfide bond, hardness, gel strength, and water-holding capacity of the gels. During the thermal denaturation process, SPI and myofibrillar protein jointly participated in the formation of the gel network, resulting in a G' value increase at 90 °C, forming a denser/more stable gel network structure. In vitro pepsin digestion results showed the digestibility of the reduced-salt gel with SPI was higher than that of the control. Therefore, appropriate SPI addition can improve the gel performance of reduced-salt surimi gel without affecting digestion and absorption.

Effect and mechanism of DC magnetic field combined with calcium chloride on saltiness and flavor enhancement of low salt pork gel

This study intended to investigate the synergistic effect of direct current magnetic field (DC-MF) and calcium chloride (CaCl2) on improving the saltiness and quality of pork gel and to explore the potential adjustment mechanisms involved. Pork mince was subjected to low-salt treatment of DC-MF for 3 h (T1), CaCl2 substitution (T2) or DC-MF combined with CaCl2 (T3) respectively under high and low salt controls (HC and LC). Heat-induced gels of pork mince were prepared and analyzed in terms of gel texture, saltiness perception, moisture status, salt release and protein structure. Results indicated that DC-MF combined with CaCl2 treatment could reduce the addition of sodium chloride by 5% while maintaining the saltiness and overall acceptability of mince as well as improving its texture and yield. Further studies revealed that DC-MF in concert with CaCl2 treatment could not only increase the moisture content of mince gel, but also enhance saltiness perception by causing gel matrix to release salt-bearing juices under external forces. The energy spectrum analysis also illustrated that co-treatment technique could avoid the salt loss of minced meat during cooking process. Finally, a possible potential regulatory mechanism was speculated that the synergistic action of DC-MF and CaCl2 could alter the gel texture and sodium salt availability by modifying protein conformation and inducing a competitive binding reaction site for calcium and sodium ions. In conclusion, synergistic treatment by DC-MF and CaCl2 was a potential strategy in meat salt reduction.

Synergistic effect and mechanism of cellulose nanocrystals and calcium ion on the film-forming properties of pea protein isolate

The current serious environmental problems have greatly encouraged the design and development of food packaging materials with environmental protection, green, and safety. This study aims to explore the synergistic effect and corresponding mechanism of cellulose nanocrystals (CNC) and CaCl2 to enhance the film-forming properties of pea protein isolate (PPI). The combination of 0.5 % CNC and 4.5 mM CaCl2 resulted in a 76.6 % increase in tensile strength when compared with pure PPI-based film. Meanwhile, this combination effectively improved the barrier performance, surface hydrophobicity, water resistance, and biodegradability of PPI-based film. The greater crystallinity, viscoelasticity, lower water mobility, and improved protein spatial conformation were also observed in CNC/CaCl2 composite film. Compared with the control, the main degradation temperature of composite film was increased from 326.23 °C to 335.43 °C. The CNC chains bonded with amino acid residue of pea protein at specific sites via non-covalent forces (e.g., hydrogen bonds, Van der Waals forces). Meanwhile, Ca2+ promoted the ordered protein aggregation at suitable rate and degree, accompanied by the formation of more disulfide bonds. Furthermore, proper Ca2+ could strengthen the cross-linking and interaction between CNC and protein, thereby establishing a stable network structure. The prepared composite films are expected to be used for strawberry preservation.

Enhancing textural properties in plant-based meat alternatives: The impact of hydrocolloids and salts on soy protein-based products

Consumer studies suggest that the meat-like texture of plant-based meat alternatives is crucial for the market success of these products. Many meat analogues contain wheat gluten, because it is cost-effective and give rise to nice fibrous structures. However, individuals with celiac disease cannot consume products containing wheat gluten producing a fibrous structure. To provide meat-like textures, different hydrocolloids with appropriate salt concentrations could be used. Therefore, this study investigated the influence of different hydrocolloids, including high acyl gellan gum, low acyl gellan gum, high methoxyl pectin, low methoxyl pectin, and xanthan at 2%, as well as two types of salts (CaCl2 and NaCl) at three concentrations (0%, 0.5%, and 1%) on the macrostructure, microstructure, and mechanical properties of plant-based meat alternatives containing only soy protein isolate and without wheat gluten. The addition of hydrocolloids and salts increased the cross-link bonds and structural compactness at the microscopic level and enhanced the fibrous structure at the microscopic level at different extent. These findings provide insight into how the addition of salts and hydrocolloids can effect plant-based meat alternatives without wheat gluten, which have practical implications for the food industry and are important for their success in the market.

Degradation and evaluation of myofibril proteins induced by endogenous protease in aquatic products during storage: a review

Myofibril proteins degradation constitutes an important factor in quality deterioration, procedural activation or inhibition of endogenous protease potential regulates autolytic proteolysis-induced softening of post mortem fish muscle. Based on the brief introduction of myofibril proteins degradation in fish skeletal muscle, a detailed description of the main myofibril degradation properties and the distinct role played by endogenous proteases were proposed, which reflects the limitations and challenges of the current research on myofibril hydrolysis mechanisms based on the varied surrounding conditions. In addition, the latest researches on the evaluation method of myofibril proteins degradation were comprehensively reviewed. The potential use of label-free proteomics combined with bioinformatics was also emphasized and has become an important means to in-depth understand protein degradation mechanism.

Effects of nanocellulose combined with high pressure on the textural, structural, and gel properties of Nemipterus virgatus sausage

This study aimed to improve the gel quality of golden threadfin bream (Nemipterus virgatus) sausage by adding sugarcane nanocellulose (SNC) and using high pressure combined with a two-stage heat treatment. The gel strength, textural properties, protein secondary structure, water states, and microstructure were analyzed and compared. The results indicated that the heat treatment was beneficial to stabilizing the protein gel structure, increasing the gel strength and textural quality, and reducing the cooking loss. High-pressure treatment resulted in a decrease of α-helix and an increase of β-sheet in the protein, forming a dense gel structure, which enhanced the gel strength and the percentage of bound water. The superior hydrophilicity of nanocellulose and its cross-linking with protein increased the percentage of bound water in the gel, which improved the water-holding capacity and mechanical properties. Therefore, the best gel quality was obtained by adding nanocellulose and treating it with high pressure combined with two-stage heating.

Effects of heating rates on the self-assembly behavior and gelling properties of beef myosin

BACKGROUND

Myosin is the most important component of myofibrillar protein, with excellent gelling properties. To date, heating treatment remains the mainstream method for forming gel in meat products, and it has the most extensive application in the field of meat industry. However, at present, there are few reports on the effects of heating rates on myosin self-assembly and aggregation behavior during heating treatment.

RESULTS

The present study aimed to investigate the effects of different heating rates (1, 2, 3 and 5 °C min^-1 ) on the self-assembly behavior, physicochemical, structural and gelling properties of myosin. At the lowest heating rate of 1 °C min^-1 , the myosin gel had a dense microstructure, the highest elastic modulus (G') and water holding capacity compared to higher heating rates (2, 3 and 5 °C min^-1 ). At higher temperatures (40, 45 °C), the surface hydrophobicity, turbidity, particle size distribution and self-assembly behavior of myosin in pre-gelling solutions showed that myosin had sufficient time to denature, underwent full structure unfolding before aggregation at the heating rate of 1°C min^-1 , and formed regular and homogeneous spherical aggregates. Therefore, the myosin gel also had a better three-dimensional network.

CONCLUSION

The heating rates had an important effect on the quality of myosin gels, and had theoretical implications for improving the quality of meat gel products. © 2023 Society of Chemical Industry.

Insights into the trace Sr2+ impact on the gel properties and spatial structure of mutton myofibrillar proteins

Myofibrillar proteins (MPs) and the quality of meat strongly depend on the properties of MP gels, which in turn depend on several parameters that include the thermal history and the concentration of metal ions. Strontium element (Sr) widely exists in mineral water and is found as strontium ions (Sr²⁺), which is an essential trace element for humans. This study investigated the effects of trace Sr²⁺ on the structure-function relationship of mutton MPs, as well as their gels with water. Trace concentrations of Sr²⁺ were found to significantly alter the conformation of the MPs. An increase in Sr²⁺ concentration was associated with a reduction in the tightness and strength of the gel and a significant increase in its water-holding capacity As compared to the untreated control sample, the solubility, particle size, and the magnitude of the Zeta potential of the gels increased by 13.03 %, 12.62 %, and 19.73 %, respectively, whereas the water retention capacity and the gel strength increased by 23.13 % and 21.90 %, at a Sr²⁺ concentration of 5.0 mg/L. Molecular docking predicted an increase in ionic bonds and disulfide bonds because Sr²⁺ had a strong interaction with hydrophilic amino acids and acidic amino acids. The analysis of molecular forces further verified the significant facilitation of interactions between MP molecules with the induction of Sr²⁺. As compare to the untreated control group, the ionic and disulfide bonds increased by 141.17 % and 66.94 %, when treated with 5.0 mg/L Sr²⁺. These changes were likely due to the enhancement of protein-protein interactions caused by Sr²⁺, which could induce MP molecules to properly unfold and aggregate in gel formation. The results could provide a basis for improving the texture and the quality of meat and meat products.

Facile post-gelation soaking strategy toward low-alkaline konjac glucomannan gels

A facile post-gelation soaking strategy for producing low-alkaline konjac glucomannan (KGM) gels was investigated in this work. The dealkalization kinetics of soaking alkali-induced gels in citric acid (CA) solutions was determined. A comparison of sensory, textural, and water holding properties was made between untreated and post-soaking gels. Post-gelation exposure to acid took less time for lowering the gel pH at higher CA concentrations, eliminated the unattractive flavor of KGM gels and endowed them a higher hardness and breaking force. Comparatively, the whiteness of post-soaking gels was increased by 3.8%-13.1% with volume being decreased by 4.9%-8.6%, while the discrepancies were less apparent after a long-term storage. Low-alkaline gels treated by 4 g/L CA shared similar textural features with conventional KGM gels. Despite the difference in water distribution and water holding capacity of KGM gels, the syneresis of resultant low-alkaline KGM gels was not significantly affected.

Binary Hydrogels: Induction Methods and Recent Application Progress as Food Matrices for Bioactive Compounds Delivery-A Bibliometric Review

Food hydrogels are biopolymeric materials made from food-grade biopolymers with gelling properties (proteins and polysaccharides) and a 3D network capable of incorporating large amounts of water. They have sparked considerable interest because of their potential and broad application range in the biomedical and pharmaceutical sectors. However, hydrogel research in the field of food science is still limited. This knowledge gap provides numerous opportunities for implementing their unique properties, such as high water-holding capacity, moderated texture, compatibility with other substances, cell biocompatibility, biodegradability, and high resemblance to living tissues, for the development of novel, functional food matrices. For that reason, this article includes a bibliometric analysis characterizing research trends in food protein-polysaccharide hydrogels (over the last ten years). Additionally, it characterizes the most recent developments in hydrogel induction methods and the most recent application progress of hydrogels as food matrices as carriers for the targeted delivery of bioactive compounds. Finally, this article provides a future perspective on the need to evaluate the feasibility of using plant-based proteins and polysaccharides to develop food matrices that protect nutrients, including bioactive substances, throughout processing, storage, and digestion until they reach the specific targeted area of the digestive system.

Strategies to optimize the structural and functional properties of myofibrillar proteins: Physical and biochemical perspectives

Myofibrillar protein (MP), as the main meat protein, have high nutritional value. However, the relatively poor solubility of MP at low ionic strength sometimes limits the utilization of MP to produce products rich in meat protein. Accordingly, appropriate modification of MP is needed to improve their functional properties. In general, MP modification strategies are categorized into biochemical and physical approaches. Different from other available reviews, the review focuses on summarizing the principles and applications of several techniques of physical modification, briefly depicting biochemical modification as a comparison. Modification of MP with a certain intensity of direct current magnetic field, ultrasound, high pressure, microwave, or radio frequency can improve solubility, emulsification, stability, and gel formation. Of these, magnetic field and microwave-modified MP have shown some potential in reducing salt in meat. These physical techniques can also have synergistic effects with other conditions (temperature, pH, physical or chemical techniques) to compensate for the deficiencies of individual treatment techniques. However, these strategies still need further research for practical applications.HIGHLIGHTSThe current status and findings of research on direct current magnetic field in meat processing are presented.Several physical strategies to modify the microstructure and functional properties of MPs.The synergistic effects of these techniques in combination with other methods to modify MPs are discussed.

Role of low molecular additives in the myofibrillar protein gelation: underlying mechanisms and recent applications

Understanding mechanisms of myofibrillar protein gelation is important for development of gel-type muscle foods. The protein-protein interactions are largely responsible for the heat-induced gelation. Exogenous additives have been extensively applied to improve gelling properties of myofibrillar proteins. Research has been carried out to investigate effects of different additives on protein gelation, among which low molecular substances as one of the most abundant additives have been recently implicated in the modifications of intermolecular interactions. In this review, the processes of myosin dissociation under salt and the subsequent interaction via intermolecular forces are elaborated. The underlying mechanisms focusing on the role of low molecular additives in myofibrillar protein interactions during gelation particularly in relation to modifications of the intermolecular forces are comprehensively discussed, and six different additives i.e. metal ions, phosphates, amino acids, hydrolysates, phenols and edible oils are involved. The promoting effect of low molecular additives on protein interactions is highly attributed to the strengthened hydrophobic interactions providing explanations for improved gelation. Other intermolecular forces i.e. covalent bonds, ionic and hydrogen bonds could also be influenced depending on varieties of additives. This review can hopefully be used as a reference for the development of gel-type muscle foods in the future.

Gel performance of surimi induced by various thermal technologies: A review

Heating is a vital step in the gelation of surimi. Conventional water bath heating (WB) has the advantages of easy operation and low equipment requirements. However, the slow heat penetration during WB may lead to poor gel formation or gels prone to deterioration, especially with one-step heating. The two-step WB is time-consuming, and a large amount of water used tends to cause environmental problems. This review focuses on key factors affecting the quality of surimi gels in various heating technologies, such as surimi protein structure, chemical forces, or the activity of endogenous enzymes. In addition, the relationships between these factors and the gel performance of surimi under various heating modes are discussed by analyzing the heating temperature and heating rate. Compared with WB, the gel performance can be improved by controlling the heating conditions of microwave heating and ohmic heating, which are mainly achieved by changing the molecular structure of myofibrillar proteins or the activity of endogenous enzymes in surimi. Nevertheless, the novel thermal technologies still face several limitations and further research is needed to realize large-scale industrial production. This review provides ideas and directions for developing heat-induced surimi products with excellent gel properties.

Improvement of the gel properties and flavor adsorption capacity of fish myosin upon yeast β-glucan incorporation

The potential effects of yeast β-glucan (YG) on heat-induced gel properties, microstructure and flavor adsorption capacity of fish myosin at different NaCl concentrations were investigated in this study. The incorporation of YG significantly improved the texture properties, gel strength, water holding capacity (WHC), storage modulus and loss modulus of myosin gels, especially at a high salt level, whereas the whiteness declined. Furthermore, myosin gels containing YG displayed a more compact and ordered three-dimensional network structure, accompanied by the increasing immobilization of water in gels. The binding abilities of gels to selected flavor compounds at high salt content were inferior to those at the low salt content. Regardless of the salt level, YG addition boosted the flavor binding capacity of gels, which might be attributed to the unfolding of the protein conformation by exposing more flavor-binding sites, as well as the porous sponge structure of YG with unique adsorption capacity.

Interactions between unfolding/disassembling behaviors, proteolytic subfragments and reversible aggregation of oxidized skeletal myosin isoforms at different salt contents

Myosin filament plays a critical role in water-trapping and thermodynamic regulation during processing of brined muscle foods. The redox state and availability of proteolytic/antioxidant enzymes affected by salt may change the ion-binding capacity of myosin consequently contributing to swelling and rehydration. Thus, this study investigated the impact of different salt content (0%, 1%, 2%, 3%, 4%, 5% NaCl) and oxidation in vitro (10 mM H₂O₂/ascorbate-based hydroxyl radical (OH)-generating system) on the oxidative stability, solubility/dispersion capacity, chymotrypsin digestibility, aggregation site and the microrheological properties of isolated porcine myosin. The result showed that, brining at 2% salt exposed more sulfhydryl groups and inhibited the formation of disulfide bond, whereby smaller dispersed structure (diameter within 10-50 nm) and higher Ca²⁺-ATPase activity of the denatured myosin were observed. Accordingly, gel electrophoresis showed that myosin S1 and HMM subunits were highly oxidized and susceptible to reversible assembles. Despite enhanced hydrophobic interactions between swelled myosin at 3% salt content, ≥4% salt greatly promoted the exposure/polarization of tryptophan and cross-linking structures, mainly occurring at myosin S2 portion. The results of micro-rheology proved that oxidized myosin formed a tighter heat-set network following rehydration at high ion strength (≥4% salt), suggesting an increased inter-droplet resistance and macroscopic viscosity. This work is expected to give some useful insights into improved texture and functionality of engineered muscle foods.

High-pressure processing influences the conformation, water distribution, and gel properties of pork myofibrillar proteins containing Artemisia sphaerocephala Krasch gum

•

Artemisia sphaerocephala Krasch gum could improve WHC and gel strength.

•

HPP (≤200 MPa) induced high immobilized water proportion and a dense, uniform microstructure of MP-AG gels.

•

HPP (>200 MPa) decreased surface hydrophobicity and storage modulus of MP-AG solutions.

•

HPP (>200 MPa) increased particle size and amount of reactive sulfhydryl group of MP-AG solutions.

•

The results have great potential for developing reduced-sodium meat products.

The effect of high-pressure processing (100–4 00 MPa) on conformation, water distribution, and gel characteristics of reduced-sodium (0.3 M NaCl) myofibrillar protein containing 0.15% Artemisia sphaerocephala Krasch gum (AG) was investigated. The addition of AG resulted in the increase of WHC, proportion of immobilized water, and gel strength. Then, the WHC, proportion of immobilized water, and gel strength peaked after 200 MPa treatment, attributed to increased solubilization and zeta potential of MP, decreased particle size of MP, exposure of intrinsic tryptophan residues and the partial transformation of α-helix into β-sheet in MP. Moreover, 300 and 400 MPa induced decreases in surface hydrophobicity, solubility and storage modulus, resulting in the formation of loose and disordered gel structures with attenuated WHC. These results suggest that application of moderate HPP (200 MPa) combined with AG could provide a novel approach to improve the WHC and gelation properties of reduced-sodium meat products.

Valorization of Cattle Slaughtering Industry By-Products: Modification of the Functional Properties and Structural Characteristics of Cowhide Gelatin Induced by High Hydrostatic Pressure

This study investigates the effects of different pressures (200, 250, 300, 350, and 400 MPa) and durations (5, 10, 15, 20, and 25 min) on the functional properties, secondary structure, and intermolecular forces of cowhide gelatin. Our results show that high hydrostatic pressure significantly affected the two, three, and four-level structures of gelatin and caused the contents of the α-helix and β-turn to decrease by 68.86% and 78.58%, respectively (p < 0.05). In particular, the gelatin at 300 MPa for 15 min had the highest gel strength, emulsification, solubility, and foaming of all the treatment conditions under study. The analysis of the surface hydrophobicity, sulfhydryl content, zeta potential, and Raman spectroscopy shows that at a pressure of 300 MPa (15 min), the hydrogen bonds and hydrophobic interactions between collagen molecules are strongly destroyed, leading to changes in the tertiary and quaternary conformation of the protein and unfolding, with the electrostatic repulsion between protein particles making the decentralized state stable. In conclusion, moderate pressure and time can significantly improve the functional and structural properties of collagen, which provides theoretical support and guidance for realizing the high-value utilization of cowhide.

Changes in Myosin from Silver Carp (Hypophthalmichthys molitrix) under Microwave-Assisted Water Bath Heating on a Multiscale

To further prove the advantages of microwave-assisted water bath heating (MWH) in low-value fish processing, the effects of different heating methods (two heating stage method, high temperature section respectively using MWH1, MWH2, MWH3, WH—water heating, MH—microwave heating) on secondary and tertiary myosin structures, SDS-PAGE, surface morphology, scanning electron microscopy (SEM), and particle size distribution were compared and analyzed. The findings revealed that MH and MWH aided in the production of gel formations by promoting myosin aggregation. Myosin from silver carps demonstrated enhanced sulfhydryl group and surface hydrophobicity after MWH treatment, as well as a dense network structure. The distribution of micropores becomes more uniform when the microwave time is increased. Actually, the total effect of microwave time on myosin is not substantially different. The correlation between particle size distribution and protein aggregation was also studied, in terms of time savings, the MWH of short microwave action is preferable since it not only promotes myosin aggregation but also avoids the drawbacks of a rapid warming rate. These discoveries give a theoretical foundation for understanding silver carp myosin under microwave modification, which is critical in the food industry.

Effects of micro-/nano-scaled chicken bones on heat-induced gel properties of low-salt pork batter: Physicochemical characteristics, water distribution, texture, and microstructure

The effect and mechanism of micro-/nano-scaled (MCB/NCB) chicken bones on improved gel properties of low-salt (0.5%) pork batters (LSPB) were investigated. Results showed that the Ca²⁺ released from MCB/NCB induced protein conformational transition of LSPB from α-helix and β-turn to random coil, which facilitated the orderly protein aggregation, resulting in the formation of denser and more uniform gel network. The better-organized gel network not only improved the textural properties and gel strength, but also contributed to the cooking loss reduction, water release decline, water state transition from free water into more immobilized water, and proton density increase, resulting in better sensory attributes. NCB showed more preferable effects on the property improvement of LSPB gels than MCB, because of its smaller particle size, less redness and yellowness, higher dispersibility, and higher Ca²⁺ release. This study could help promote the high-value utilization of poultry by-product bones and development of low-salt meat products.

Characteristics and Mechanism of Crayfish Myofibril Protein Gel Deterioration Induced by Autoclaving

Crayfish myofibril protein (CMP) gel deterioration induced by autoclaving was investigated. A series of CMP gels were obtained through treating CMP solutions at different autoclaving conditions from 100 °C/0.1 MPa to 121 °C/0.21 MPa, and then characteristics and the mechanism of gel texture deterioration along with the intensification of autoclaving were explored through determining appearance, texture, protein composition, cross-linking forces, degree of hydrolysis, water state, microstructure of the gels, and average particle size of aggregates. When autoclaving was at above 105 °C/0.103 MPa, texture of CMP gel showed a tendency to severely weaken with the intensification of autoclaving (p < 0.05), hydrophobic interaction and aggregation between proteins weakened gradually (p < 0.05), and moderately bound water in the gel decreased and T22 relaxation time significantly increased (p < 0.05). After heating for 30 min at above 105 °C/0.103 MPa, pores in the microstructure of CMP gel enlarged obviously, and myosin heavy chain (MHC) degraded. It can be concluded that CMP gel deterioration induced by autoclaving was associated with the degradation of MHC and 105 °C might be the critical temperature to ensure good texture of crayfish products.

Gel properties of heat-induced transparent hydrogels from ovalbumin by acylation modifications

In this paper, the effects of acylation modification on the gel behavior of ovalbumin (OVA) under heating induction have been investigated. From the obtained results, the acylated OVA hydrogels exhibited superior gelation properties than the native OVA hydrogels (NOVA-G) in terms of light transmission, gel hardness, resilience and water holding capacity. SEM revealed acylation modifications effectively promoted the formation of uniform and dense network structure of OVA hydrogels. The main intermolecular forces of the acylation-modified OVA hydrogels were hydrophobic interactions and hydrogen bonding. FTIR showed that acylation modifications caused 26.2% decrease in α-helix and 59.2% increase in β-sheet content compared to NOVA-G. Furthermore, in-vitro release experiments showed that the release rate of curcumin from acylated OVA hydrogels was significantly delayed. Moreover, the above results have shown that acylation modifications can be considered as an effective method to improve the gelation as well as drug release properties of protein hydrogels.

Influence of the Mixture of Carrageenan Oligosaccharides and Egg White Protein on the Gelation Properties of Culter alburnus Myofibrillar Protein under Repeated Freezing-Thawing Cycles

This study aims to investigate the influence of the mixture (CGO/EWP) of carrageenan oligosaccharide (CGO) and egg white protein (EWP) (CGO/EWP, CGO: EWP = 1:1, m/m) on the functional, structural, and gelling properties of Culter alburnus myofibrillar protein (MP) during repeated freezing-thawing cycles by treating MP samples separately with EWP, CGO, or CGO/EWP based on the wet weight (1%, m/m), using samples without any cryoprotectant as the blank group. After the second repeated freezing-thawing cycle, the sulfhydryl group content was found to be significantly (p < 0.05) higher in the CGO/EWP (30.57 nmol/mg) and CGO (36.14 nmol/mg) groups than in the EWP group (23.80 nmol/mg), indicating that CGO/EWP and CGO can more effectively delay the oxidative deterioration of functional groups. Additionally, the surface hydrophobicity was shown to be significantly lower in the CGO (25.74) and CGO/EWP (27.46) groups than in the EWP (34.66) and blank (39.32) groups. Moreover, the α-helix content was higher in the CGO (35.2%) and CGO/EWP (32.3%) groups than in the EWP (29.2%) and blank (25.0%) groups. These data indicated that CGO and CGO/EWP could more effectively increase the structural stability, thereby inhibiting the exposure of hydrophobic groups and curbing the decline of α-helix content. During the heat-induced gel-forming process, EWP and CGO/EWP could enhance the gel viscoelasticity and strength. After the second freezing-thawing cycle, when compared with the blank group, the CGO/EWP group showed significantly (p < 0.05) higher water-holding capacity (66.30% versus 53.93%) and shorter T22 relaxation time (413.56 versus 474.99 ms). The integrated results indicated that CGO/EWP could more effectively delay the decrease of protein-water molecular interaction forces in the MP gel. This study shed light on the mechanism of CGO/EWP as a cryoprotective mixture in improving the deterioration of MP gelation properties during repeated freezing-thawing cycles.

Ovalbumin and Kappa-Carrageenan Mixture Suppresses the Oxidative and Structural Changes in the Myofibrillar Proteins of Grass Carp (Ctenopharyngodon idella) during Frozen Storage

This study was done to analyze the cryoprotective influence of ovalbumin (OVA) with kappa-carrageenan (KC) in grass carp myofibrillar proteins during frozen storage. Ca2+-ATPase activity of MP was significantly reduced due to protein denaturation and showed a direct association with decreased sulphydryl (SH) contents and tertiary structural properties. Besides that, an increase in carbonyl, surface hydrophobicity, and dityrosine contents was observed. The addition of OVA-KC significantly restricted the decline in Ca2+-ATPase and SH groups, which were further confirmed by the retarded increase in carbonyls. Furthermore, the addition of OVA-KC increased the stability of α-helix contents. Moreover, MP treated with 6% OVA-KC also improved intermolecular interaction forces linked with gelling and water holding properties of MP. Therefore, it can be concluded that OVA-KC could be used as an effective cryoprotectant in fish and related products for preservation and commercialization.