Bioactive starch nanocomposite films with antioxidant activity and enhanced mechanical properties obtained by extrusion followed by thermo-compression

Development of a self-reinforced starch-derived film with biocompatibility and mechanical properties

The scraps produced while processing packaging materials will cause a waste of resources. In this study, starch-based self-reinforced film (SSRF) using thermoplastic starch (TPS, 45 wt%) and polypropylene (PP, 53 wt%) was developed. The effect of extrusion times (1-4 times) on the film structure and performance was explored. The results show as the number of extrusions increases, the color of SSRF deepens from gray-white to brown, and the crystallinity increases. The mechanical properties of the four types of SSRF first increase and then decrease. The 2-SSRF has the best performance, with tensile strength of 13.23 MPa, elongation at break of 61.35%, Young's modulus of 1128.99 MPa, and flexural strength of 33.19 MPa. Proper extrusion improves the compatibility of TPS and PP. However, repeated extrusion will cause PP degradation and TPS carbonization, reducing interfacial interaction. This study developed new starch-based self-reinforced film and provided theoretical guidance for reusing packaging material scraps.

Effects of eugenol on physicochemical properties of sturgeon skin collagen-chitosan composite membrane

In this study, a series of collagen-chitosan-eugenol (CO-CS-Eu) flow-casting composite films were prepared using collagen from sturgeon skin, chitosan, and eugenol. The physicochemical properties, mechanical properties, microstructure, as well as antioxidant and antimicrobial activities of the composite membranes were investigated by various characterization techniques. The findings revealed that the inclusion of eugenol augmented the thickness of the film, darkened its color, reduced the transparency, and enhanced the ultraviolet light-blocking capabilities, with the physicochemical properties of the CO-CS-0.25%Eu film being notably favorable. Eugenol generates increasingly intricate matrices that disperse within the system, thereby modifying the optical properties of the material. Furthermore, the tensile strength of the film decreased from 70.97 to 20.32 MPa, indicating that eugenol enhances the fluidity and ductility of the film. Added eugenol also exhibited structural impact by loosening the film cross-section and decreasing its density. The Fourier transform infrared spectroscopy results revealed the occurrence of several intermolecular interactions among collagen, chitosan, and eugenol. Moreover, the incorporation of eugenol bolstered the antioxidant and antimicrobial capabilities of the composite film. This is primarily attributed to the abundant phenolic/hydroxyl groups present in eugenol, which can react with free radicals by forming phenoxy groups and neutralizing hydroxyl groups. Consequently, inclusion of eugenol substantially enhances the freshness retention performance of the composite film. PRACTICAL APPLICATION: ● The CO-CS-Eu film utilizes collagen from sturgeon skin, improving the use of sturgeon resources.● Different concentrations of eugenol altered its synergistic effect with chitosan.● The CO-CS-Eu film is composed of natural products with safe and edible properties.

Roles of polysaccharides-based nanomaterials in food preservation and extension of shelf-life of food products: A review

In food production sectors, food spoilage and contamination are major issues that threaten and negatively influence food standards and safety. Several physical, chemical, and biological methods are used to extend the shelf-life of food products, but they have their limitations. Henceforth, researchers and scientists resort to novel methods to resolve these existing issues. Nanomaterials-based extension of food shelf life has broad scope rendering a broad spectrum of activity including high antioxidant and antimicrobial activity. Numerous research investigations have been made to identify the possible roles of nanoparticles in food preservation. A wide range of nanomaterials via different approaches is ultimately applied for food preservation. Among them, chemically synthesized methods have several limitations, unlike biological synthesis. However, biological synthesis protocols are quite expensive and laborious. Predominant studies demonstrated that nanoparticles can protect fruits and vegetables by preventing microbial contamination. Though several nanomaterials designated for food preservation are available, detailed knowledge of the mechanism remains unclear. Hence, this review aims to highlight the various nanomaterials and their roles in increasing the shelf life of food products. Adding to the novel market trends, nano-packaging will open new frontiers and prospects for ensuring food safety and quality.

Chitosan-Based Composites: Development and Perspective in Food Preservation and Biomedical Applications

Chitin, which may be the second-most common polymer after cellulose, is the raw material of chitosan. Chitosan has been infused with various plant extracts and subsidiary polymers to improve its biological and physiological properties. Chitosan's physicochemical properties are enhanced by blending, making them potential candidates that can be utilized in multifunctional areas, including food processing, nutraceuticals, food quality monitoring, food packaging, and storage. Chitosan-based biomaterials are biocompatible, biodegradable, low toxic, mucoadhesive, and regulate chemical release. Therefore, they are used in the biomedical field. The present manuscript highlights the application of chitosan-based composites in the food and biomedical industries.

Effect of Addition of Cross-Linked Starch on the Properties of Degraded PBAT Poly(butylene adipate-co-terephthalate) Films

This work aimed to evaluate the properties of butylene adipate-co-terephthalate (PBAT) degraded after 1800 days of storage (DPBAT) by preparing blends (films) with crosslinked starch (Cm) through extrusion and thermocompression. Different ratios of DPBAT:Cm (70:30, 60:40, and 50:50 m/m) were prepared. The incorporation of Cm into DPBAT significantly changed the properties of the films by making them stiffer (increasing Young's modulus by up to 50%) and increasing the thermal resistance of DPBAT. The presence of crosslinked starch in the films made them less hydrophobic (with decreased contact angle and increased moisture content), but these parameters did not vary linearly with changes in the content of crosslinked starch in the blend (DPBAT:Cm). The microscopic images show an inhomogeneous distribution of Cm granules in the DPBAT matrix. Thus, the films prepared with PBAT show a significant decrease in their mechanical parameters and heat resistance after long-term storage. However, the preparation of blends of degraded DPBAT with crosslinked starch promoted changes in the properties of the films prepared by thermocompression, which could be useful for disposable packaging.

Evolution of the free volume during water desorption in thermoplastic starch/citric acid films: In situ positron annihilation studies

The effect of citric acid (CA) concentration and water content on the free hole volume of thermoplastic cassava starch films (TPS) was studied. To this aim, continuous in situ positron annihilation lifetime spectroscopy measurements were performed at fixed moisture content and during water desorption. The results show that the increase in CA concentration leads to wider free hole volume distributions with lower mean values. During water desorption, the mean values and width of such distributions systematically decrease with the exposure time, and the evolution of the hole volumes was well-described using the Kohlrausch-Williams-Watts function. The water vapour permeability was significantly higher in films incorporating 5 % (w/w) of CA, in line with the more open network of this material that was revealed in the hole volumes distribution. The Young's modulus of all the developed films increased significantly after partial water desorption, which was attributed to the plasticizer loss reflected in a decrease in the mean hole volume value (between 4 % and 13 %). This work evidences that the control and report of the relative humidity are essential when testing TPS-based films, as their nanostructures are strongly dependent on external conditions.

Co-Plasticization of Starch with Glycerol and Isosorbide: Effect on Retrogradation in Thermo-Plastic Cassava Starch Films

Thermoplastic starch (TPS) has emerged as an essential alternative to produce environmentally friendly packaging; however, retrogradation is a disadvantage that affects its shelf life. This study analyzed the co-plasticizing effect of isosorbide on the mechanical, thermal, physicochemical, and microstructural properties and the retrogradation of films obtained by blown film extrusion from thermoplasticized starch with mixtures of glycerol and isosorbide in different ratios (3:0, 2:1, 1:2, and 0:3, respectively). The results showed that the higher concentration of isosorbide significantly increased the tensile strength; however, it reduced the elongation. Retrogradation modeled using the Avrami equation showed that the presence of isosorbide reduced the retrogradation rate (k) and modified the recrystallization mechanism (n). The relative crystallinity in the plasticized TPS films was reduced to 89%, and the adsorption significantly decreased. Isosorbide was very important in reducing the retrogradation of TPS. The best performance was obtained with the 2:1 ratio of glycerol/isosorbide due to the synergistic effect between the plasticizers. The results would allow tuning the properties of TPS films by combining glycerol/isosorbide in different ratios, which enables the design of materials tailored to potential application requirements.

Characterization of Cassava Starch Extruded Sheets Incorporated with Tucumã Oil Microparticles

The application of biopolymers and feasible technologies to obtain sheets is crucial for the large-scale production of food packages and for reducing plastic pollution. Additionally, the inclusion of additives in sheets can affect and improve their properties. This work aimed to incorporate tucumã oil (TO) and TO microparticles produced by spray drying (SD), spray chilling (SC), and their combination (SDC) into extruded cassava starch sheets and to evaluate the effect of such addition on their physical, optical, and mechanical properties. Gum Arabic and vegetable fat were used as wall materials for SD and SC/SDC, respectively. The sheets enriched with tucumã oil (FO) and the microparticles produced by SD, SC and SDC (FSD, FSC, and FSDC, respectively) presented yellow color (hue angle around 90°) and higher opacity (11.6–25.3%) when compared to the control (6.3%). All sheets showed high thickness (1.3–1.8 mm), and the additives reduced the water solubility of the materials (from 27.11% in the control to 24.67–25.54% in enriched samples). The presence of large SDC particles, as evidenced by Scanning Electron Microscopy (SEM), caused discontinuity of the sheet structure and decreased mechanical strength of the FSDC. One may conclude that potential active packages were obtained by extrusion of cassava starch sheets added with pure and encapsulated TO.

Highly functional nanocellulose-reinforced thermoplastic starch-based nanocomposites

Starch/nanocellulose nanocomposite is of interest because of its potential applications in the field of biodegradable food packaging and biomedical applications thanks to its safe, biodegradable, fabricated by simple traditional methods, and cheap. The starch reinforced by nanocellulose significantly improved the physicochemical properties, especially the mechanical properties, thermal stability as well as barrier properties, compared to the starch matrix. With outstanding advantages compared to polymer nanocomposites derived from petroleum, the starch/nanocellulose composite is considered a potential agent for biodegradable food packaging and biomedical technology.

Incorporating Portulaca oleracea extract endows the chitosan-starch film with antioxidant capacity for chilled meat preservation

This study aimed to investigate the application potential of Portulaca oleracea extract (POE) in active packaging for the preservation of chilled meat. First, the antioxidant capacity and active ingredients of POE were systematically studied. The results demonstrated that POE has excellent antioxidant capacity and contains abundant antioxidant compounds. Subsequently, antioxidant-active packaging films based on chitosan and starch containing different concentrations of POE (CS/POE films) were successfully developed. The main physicochemical and mechanical properties of the CS/POE films were characterized and evaluated. The CS/POE films exhibited remarkable antioxidant activity and can significantly reduce lipid oxidation in meat. Compared with polyethylene film, the CS/POE films-treated meats had better preservation effects and longer shelf-life. These findings suggested that CS/POE film has the potential to become a good alternative to conventional plastics in food packaging. In conclusion, Portulaca oleracea extract is an excellent natural antioxidant with great potential in active packaging for chilled meat preservation.

Simultaneous improvement of the physical and biological properties of starch films by incorporating steviol glycoside-based solid dispersion

Bioactive compounds are frequently incorporated into polysaccharides (e.g., starch) to form active biodegradable films for food packaging, but some of them are water insoluble (e.g., curcumin, CUR) that will make the films have undesirable performance. Herein, CUR was successfully solubilized into the aqueous starch film solution by steviol glycoside (STE, a natural sweetener)-based solid dispersion. The mechanisms of solubilization and film formation were explored through molecular dynamic simulation and various characterization methods. The results showed that the amorphous state of CUR combined with micellar encapsulation of STE achieved the solubilization of CUR. STE and starch chains cooperated to form the film via hydrogen bonding, while CUR was uniformly and densely distributed within the film in the form of needle-like microcrystals. The as-prepared film exhibited high flexibility, great moisture barrier, and excellent UV barrier (UV transmittance: ∼0 %). Compared with the film containing CUR alone, the as-prepared film possessed higher release efficiency, antibacterial activity, and pH response sensitivity due to the assistance of STE. Hence, the introduction of STE-based solid dispersion can simultaneously improve the biological and physical properties of starch films, which provides a green, nontoxic, and facile strategy for the perfect integration of hydrophobic bioactive compounds and polysaccharide-based films.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Recent advances of antibacterial starch-based materials

Starch has attracted a lot of attention because it is biodegradable, renewable, nontoxic and low cost. By adding antibacterial substances to starch, starch-based materials have antibacterial properties. The composite with other materials can improve the comprehensive performance of starch-based materials, thus broadening the application field of the material. In this paper, we focus on antibacterial starch-based materials and review their preparation and applications. It was found that antibacterial starch-based materials were most widely used in packaging, followed by medicine, and the research on smart starch-based materials was relatively less. This review may provide some reference value for subsequent studies of starch-based materials.

Reactive Extrusion as a Pretreatment in Cassava (Manihot esculenta Crantz) and Pea (Pisum sativum L.) Starches to Improve Spinnability Properties for Obtaining Fibers

Starch is a biocompatible and economical biopolymer in which interest has been shown in obtaining electrospun fibers. This research reports that cassava (CEX) and pea (PEX) starches pretreated by means of reactive extrusion (REX) improved the starches rheological properties and the availability of amylose to obtain fibers. Solutions of CEX and PEX (30-36% w/v) in 38% v/v formic acid were prepared and the rheological properties and electrospinability were studied. The rheological values indicated that to obtain continuous fibers without beads, the entanglement concentration (Ce) must be 1.20 and 1.25 times the concentration of CEX and PEX, respectively. In CEX, a higher amylose content and lower viscosity were obtained than in PEX, which resulted in a greater range of concentrations (32-36% w/v) to obtain continuous fibers without beads with average diameters ranging from 316 ± 65 nm to 394 ± 102 nm. In PEX, continuous fibers without beads were obtained only at 34% w/v with an average diameter of 170 ± 49 nm. This study showed that starches (20-35% amylose) pretreated through REX exhibited electrospinning properties to obtain fibers, opening the opportunity to expand their use in food, environmental, biosensor, and biomedical applications, as vehicles for the administration of bioactive compounds.

Genipin-Crosslinked Gelatin/Chitosan-Based Functional Films Incorporated with Rosemary Essential Oil and Quercetin

Functional food packaging films were prepared using a binary mixture of chitosan and gelatin through crosslinking with genipin and hybridization with rosemary essential oil and quercetin. The mixture of chitosan and gelatin produced the compatible film, and the added fillers also showed good compatibility. The physical properties of the chitosan/gelatin film were not greatly affected by crosslinking with genipin, and the functionality of the composite film was increased by the addition of rosemary essential oil and quercetin. The bioactive additives did not significantly affect the hydrophobicity and water vapor barrier properties of the chitosan/gelatin film but significantly changed the color, while the mechanical and thermal properties were slightly affected. The addition of these functional fillers significantly improved the UV protection, antioxidant, and antibacterial properties of the chitosan/gelatin film. Therefore, the novel chitosan/gelatin film with genipin crosslinking and the integration of rosemary essential oil and quercetin is considered to have high potential for applications in active food packaging.

Starch Nanocomposite Films: Migration Studies of Nanoparticles to Food Simulants and Bio-Disintegration in Soil

In this work, films containing AgNPs were obtained by different green synthesis techniques (AgNP in situ and AgNP L). The inclusion of nanoparticles in the starch matrix improved both mechanical and barrier properties. The migration of AgNPs from the nanocomposite material to three food simulants (water, 3% v/v acetic acid and 15% v/v ethanol) was studied. The experimental data were fitted by using different widely accepted mathematical models (Fickian, Ritger and Peppas, and Weibull), indicating that the AgNP migration followed a complex mechanism. The silver concentration (mg Ag per kg of simulant) that was released from the nanocomposite films was higher for the samples with AgNPs in situ than for those containing AgNP L. Likewise, the maximum release value (0.141 mg/dm² for AgNPs in situ in acetic acid simulant) was lower than the limits proposed by the legislation (European Commission and MERCOSUR; 10 and 8 mg/dm², respectively). The replacement of conventional plastic materials by biodegradable ones requires the evaluation of bio-disintegration tests in soil. In this sense, a period of 90 days was necessary to obtain ≥50% weight loss in both nanocomposite films. Additionally, the bio-disintegration of the samples did not contribute with phytotoxic compounds to the soil, allowing the germination of fast-growing seeds.

Preparing and Characterizing Novel Biodegradable Starch/PVA-Based Films with Nano-Sized Zinc-Oxide Particles for Wound-Dressing Applications

Given recent worldwide environmental concerns, biodegradability, antibacterial activity, and healing properties around the wound area are vital features that should be taken into consideration while preparing biomedical materials such as wound dressings. Some of the available wound dressings present some major disadvantages. For example, low water vapor transmission rate (WVTR), inadequate exudates absorption, and the complex and high environmental cost of the disposal/recycling processes represent such drawbacks. In this paper, starch/polyvinyl alcohol (PVA) material with inserted nano-sized zinc-oxide particles (nZnO) (average size ≤ 100 nm) was made and altered using citric acid (CA). Both ensure an efficient antibacterial environment for wound-dressing materials. The film properties were assessed by UV–Vis spectrometry and were validated against the UV light transmission percentage of the starch/ polyvinyl alcohol (PVA)/ zinc-oxide nanoparticles (nZnO) composites. Analyses were conducted using X-ray Spectroscopy (EDX) and scanning electron microscopy (SEM) to investigate the structure and surface morphology of the materials. Moreover, to validate an ideal moisture content around the wound area, which is necessary for an optimum wound-healing process, the water vapor transmission rate of the film was measured. The new starch-based materials exhibited suitable physical and chemical properties, including solubility, gel fraction, fluid absorption, biodegradability, surface morphology (scanning electron microscopy imaging), and mechanical properties. Additionally, the pH level of the starch-based/nZnO film was measured to study the prospect of bacterial growth on this wound-dressing material. Furthermore, the in vitro antibacterial activity demonstrated that the dressings material effectively inhibited the growth and penetration of bacteria (Escherichia coli, Staphylococcus aureus).

Single and Combined Effect of Mild-Heat Treatment and Alginate Coatings on Quality Preservation of Minimally Processed Bunching Green Onions

Bunching green onion is an Allium species that has been widely used in food flavorings and seasonings. This vegetable experiences a rapid loss of quality during storage due to physiological changes and microbial spoilage. In the current work, the single and combined effect of mild-heat treatment (55 °C for 60 s) and alginate edible coatings on the quality preservation of minimally processed bunching green onions was studied. Control and treated samples were stored at 4 °C for 15 days and examined periodically in terms of their respiration rate, weight loss, pH, soluble solids content, firmness, total polyphenol content, antioxidant activity, microbial count, decay ratio, and overall visual quality. The results showed that the combination of mild heat and alginate edible coatings was the most effective approach to slow down the respiration rate and the incidence of decay in the minimally processed bunching green onions. In addition, the treatments with alginate coating alone or combined with mild-heat treatment showed the best performance for maintaining the overall visual quality of the products during the storage.

Application of Gelatin in Food Packaging: A Review

Owing to the increasing environmental concerns and requirements for high-quality foods, edible films and coatings (based on proteins, polysaccharides, natural phenolic active substances, etc.) are being developed as effective alternatives to traditional plastic packaging. Gelatin is extracted from collagen. It is an ideal material for food packaging due to its versatile advantages such as low price, polymerization, biodegradability, good antibacterial and antioxidant properties, etc. However, gelatin film exists poor waterproof and mechanical properties, which limit its developments and applications in food packaging. Previous studies show that pure gelatin can be modified by adding active ingredients and incorporating them with bio-polymers to improve its mechanical properties, aiming to achieve the desirable effect of preservation. This review mainly shows the preparation and molding ways of gelatin-based edible films and the applications of gelatin modified with other biopolymers. Furthermore, this review provides the latest advances in gelatin-based biodegradable packaging and food applications that exhibit outstanding advantages in food preservation.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Cationized high amylose maize starch films reinforced with borax cross-linked nanocellulose

In this study, a novel strategy for modifying nanocellulose (NC) by borax cross-linking was developed, and the obtained borax modified nanocellulose (BNC) was incorporated into cationized high amylose maize starch (CS) films to evaluate the applicability. Cellulose molecules were successfully cross-linked by boron ester bonds, and the original crystal type and basic chemical structure were not changed. Compared with NC, the relative crystallinity of BNC was slightly increased, and the thermal stability was obviously enhanced. Addition of NC and BNC to CS films significantly improved their tensile strength and water resistance. The dispersion of nanocellulose in CS films was effectively improved by borax cross-linking modification. CS/BNC films showed higher mechanical and water resistance properties compared with CS/NC films. Compared with pure CS film, tensile strength of the composite film with 6 wt% BNC increased about 4.0 times, and its water-vapor permeability decreased about 37%. The novel strategy for preparing BNC by using boron ester bonds will provide a potential approach for the development of starch films with desirable properties.

Bio-based multilayer films: A review of the principal methods of production and challenges

The development of biodegradable packaging materials has been drawing attention worldwide to minimize the environmental impact of traditional petroleum-based plastics. Nevertheless, it is challenging to obtain bio-based materials with suitable properties for packaging applications. Films produced from a single biopolymer often lack some important properties. An alternative to overcome this limitation is the multilayer assembly. Under this technology, two or more materials with specific and complementary properties are combined into a single-layered structure, thus improving the performance of bio-polymer plastics. This review presents the main aspects of bio-based multilayer film production technologies, discussing their advantages and disadvantages, which have to be considered to produce the most suitable film for each specific application. Most of the studies reported that such films resulted in increased mechanical performance and decreased water, oxygen, and dioxide carbon permeability. This approach allows the addition of compounds leading to antioxidant or antibacterial activity. Finally, a discussion about the future challenges is also presented.

Elaboration and Characterization of Bioactive Films Obtained from the Incorporation of Cashew Nut Shell Liquid into a Matrix of Sodium Alginate

The objective of this work was to obtain and characterize sodium alginate-based biopolymer films with the addition of cashew nut shell liquid (CNSL). The study employed a completely randomized design, including 0%, 0.5%, 1%, and 1.5% inclusion of CNSL. Uniform formation of the films was observed, and the addition of CNSL provided better thermal resistance than did the treatment without inclusion, while the addition of CNSL reduced the homogeneity of the microstructure, especially for the 1.5% inclusion level. The permeability of the film increased as the level of CNSL increased, especially in response to the concentrations of 1% and 1.5%, and no significant difference in permeability was observed between these treatments. The tensile strength decreased proportionally as a function of the addition of CNSL, as its inclusion increased the elasticity and elongation of the films. In addition, the films with CNSL demonstrated strong antioxidant activity and discrete antimicrobial activity, and ecotoxicity analysis showed that the levels of CNSL tested and the films produced were nontoxic. Thus, these films are promising and self-sustainable alternatives for the agrifood industry.

Preparation and characterization of active oxidized starch films containing licorice residue extracts and its potential against methicillin-resistant S. aureus

The antibacterial and antioxidant packaging films were fabricated by incorporating licorice residue extracts (LREs) into oxidized starch (OS) films. The bioactive fraction (BF) was firstly obtained from LREs by using bioassay-guided isolation method. The BF showed potent anti-Gram⁽⁺⁾ bacteria effects, especially against methicillin-resistant S. aureus (MRSA) with MIC of 32.5 μg/mL. The present results also indicated that the addition of BF could significantly decrease the moisture content, water vapor permeability, light transmittance of OS films. Notably, the antibacterial and antioxidant activities of OS films significantly enhanced with the concentration of BF increasing. Moreover, the films with the highest concentration of BF showed the lowest tensile strength (4.23 MPa) and the highest elongation at break (63.89%). Meanwhile, the bioactive films could release bioactive compounds such as licochalcone A and licochalcone B into the alcoholic and fatty food simulants. Taken together, the active OS films containing LREs have the potential for application in food packaging films, due to its potential against MRSA and antioxidant activity as well as good physicochemical properties.

Effects of Three Types of Polymeric Proanthocyanidins on Physicochemical and In Vitro Digestive Properties of Potato Starch

The effects of three types of polymeric proanthocyanidins (PPC) with different degrees of polymerization (DP), namely PPC1 (DP = 6.39 ± 0.13), PPC2 (DP = 8.21 ± 0.76), and PPC3 (DP = 9.92 ± 0.21), on the physicochemical characteristics and in vitro starch digestibility of potato starch were studied. PPC addition (5%, w/w) increased the gelatinization temperature and decreased some viscosity indices of potato starch, including the peak, trough, breakdown, and setback viscosities. Starch-PPC pastes showed reduced thixotropy and improved stability and gelling properties compared to starch paste. The three types of proanthocyanidins all showed evident inhibitory effects on the digestion and retrogradation of potato starch, including short-term and long-term retrogradation. Among the three, PPC with a lower DP had stronger effects on the starch short-term retrogradation and gelling performance, whereas larger PPC molecules exhibited a greater impact on starch recrystallization and digestive characteristics. The research consequences were conducive to explore the application of functional PPC in starch-based food processing.

Potentials of polysaccharides, lipids and proteins in biodegradable food packaging applications

Bio-based packaging materials are gaining importance due to their biodegradability, sustainability and environmental friendliness. To control the food quality and improve the food safety standards, proteins polysaccharide and lipid-based packaging films are enriched with bioactive and functional substances. However, poor permeability and mechanical characteristics are the challenging areas in their commercialization. Scientists and researchers are using a combination of techniques i.e. hydrogels, crosslinking, etc. to improve the intermolecular forces between different components of the film formulation to counter these challenges More recently, biodegradable packaging materials, sometimes edible, are also used for the delivery of functional ingredients which reveals their potential for drug delivery to counter the nutrient deficiency problems. This study highlights the potentials of bio-based materials i.e. proteins, polysaccharides, lipids, etc. to develop biodegradable packaging materials. It also explores the additives used to improve the physicochemical and mechanical properties of biodegradable packaging materials. Furthermore, it highlights the novel trends in biodegradable packaging from a food safety and quality point of view.

Essential oils as additives in active starch-based food packaging films: A review

The production of sustainable food packaging from renewable sources represents a prominent alternative to the use of petrochemical-based plastics. For example, starch remains one of the more closely studied replacement options due to its broad availability, low cost and significant advances in improving properties. In this context, essential oils as additives fulfil a key role in the manufacture of renewable active packaging with superior performances. In this review, a comprehensive summary of the impact of adding essential oils to the starch-based films is provided. After a brief introduction to the fundamental concepts related to starch and essential oils, details on the most recent advances in obtaining active starch-based films are presented. Subsequently, the effects of essential oils addition on the structure-property relationships (from physicochemical to antimicrobial ones) are thoroughly addressed. Finally, applications and challenges to the widespread use of essential oils are critically discussed.

Starch/tea polyphenols nanofibrous films for food packaging application: From facile construction to enhance mechanical, antioxidant and hydrophobic properties

Starch based food packaging has been receiving increasing attention. However, the inherent poor properties of starch restrict its practical applications in the versatile material science field. In this study, a fast, simple, and environmentally friendly route to construct polyfunctional starch/tea polyphenols nanofibrous films (STNFs) by one-step temperature-assisted electrospinning was developed. The effects of introduction of tea polyphenols (TP) on the mechanical and antioxidant activity of STNFs were comprehensively investigated. Results of ABTS·+ free radical scavenging assay showed that the antioxidant activity of STNFs was endowed by addition of TP with optimum mechanical properties confirmed by tensile test. More interestingly, the hydrophobicity of STNFs was improved dramatically with increasing cross-linking time as indicated by water contact angle (WCA) measurement showing no effect on the antioxidant activity of the films. The results of this work offer a major step forward to promote functional starch-based materials for sustainable application in food packaging.

Antioxidant films and coatings based on starch and phenolics from Spondias purpurea L

The objective of this study was to prepare, for the first time, active films and coatings from fruit starch (SPFS) and phenolic stem bark extract (SBPE) from Spondias purpurea L. Starch film formulations were prepared with different SBPE contents (5-20 wt% on starch), then cast and dried into films. SBPE showed higher antioxidant activity and antimicrobial activity against both Gram-negative and Gram-positive bacteria. Chemical, morphological, thermal, optical, mechanical, and barrier properties were studied for SPFS-SBPE films. In general, the phenolic extract caused significant changes in starch films (especially when in excess), such as gradual reduction of elastic modulus and tensile strength, increased elongation, opacity, and thermal properties (e.g. glass transition and melting enthalpy). On the other hand, SBPE provided the films with active properties (antioxidant and UV-absorbing). Coatings were applied to minimally processed mangoes (MPM), which were stored for 10 days at 12 °C. SBPE-containing coatings provided better protective action, reducing the total color difference (∆E^⁎) and delaying the browning index (BI) during storage as well as reducing fungus attack. The active SPFS-SBPE films showed great potential as environmentally friendly active films and coatings.

Effect of greenly synthetized silver nanoparticles on the properties of active starch films obtained by extrusion and compression molding

Replacing packaging plastics with biodegradable active materials is an emerging concern. In this context, thermoplastic starch (TPS) films and nanocomposites containing different concentrations of silver nanoparticles synthetized with starch and yerba mate (TPS-AgNP₁: 0.006 wt.% and TPS-AgNP₂: 0.015 wt.%) were developed by extrusion and compression molding. Spherical AgNP of 20-130 nm were obtained after the green synthesis and excellent adhesion between AgNP and the matrix was observed. Consequently, both composites exhibited higher stiffness and tensile strength values than TPS, indicating a reinforcing effect of AgNP. TPS-AgNP₁ showed the highest strain at break and toughness values, and TPS-AgNP₂ presented the lowest moisture content and ability to delay E. coli growth. Additionally, all materials disintegrated after 4 weeks of burial and resulted thermally stable up to 240 °C. This investigation provides a convenient and inexpensive way to develop starch-based nanocomposites with improved properties which appear to be promising as active packaging materials.

Polysaccharides-based bio-nanostructures and their potential food applications

Polysaccharides are omnipresent biomolecules that hold great potential as promising biomaterials for a myriad of applications in various biotechnological and industrial sectors. The presence of diverse functional groups renders them tailorable functionalities for preparing a multitude of novel bio-nanostructures. Further, they are biocompatible and biodegradable, hence, considered as environmentally friendly biopolymers. Application of nanotechnology in food science has shown many advantages in improving food quality and enhancing its shelf life. Recently, considerable efforts have been made to develop polysaccharide-based nanostructures for possible food applications. Therefore, it is of immense importance to explore literature on polysaccharide-based nanostructures delineating their food application potentialities. Herein, we reviewed the developments in polysaccharide-based bio-nanostructures and highlighted their potential applications in food preservation and bioactive "smart" food packaging. We categorized these bio-nanostructures into polysaccharide-based nanoparticles, nanocapsules, nanocomposites, dendrimeric nanostructures, and metallo-polysaccharide hybrids. This review demonstrates that the polysaccharides are emerging biopolymers, gaining much attention as robust biomaterials with excellent tuneable properties.

Improvement of Andean Blueberries Postharvest Preservation Using Carvacrol/Alginate-Edible Coatings

Edible coatings are attractive strategies for blueberries postharvest preservation. In this work, carvacrol/alginate coatings were developed for application on Andean blueberries. Coating formulations were prepared based on blends of sodium alginate (2% w/v), carvacrol (0%, 0.03%, 0.06% or 0.09%), glycerol, and water and applied to the fruits by dip-coating. Then, the fruits were immersed in a calcium batch to induce a crosslink reaction. Changes in the physicochemical and microbiological characteristics of the blueberries were monitored during 21 days of storage at 4 °C. Coated blueberries were better preserved throughout the 21 days of storage because of their lower respiration rate and water loss, in comparison with the uncoated ones. Besides, the coatings enhanced the appearance and the gloss of the fruits. Control fruits showed a significant decrease in the firmness, while, in the coated fruits, this critical postharvest quality was preserved during the entire storage. Coating formulations with 0.09% of carvacrol was the most effective in preventing mesophilic aerobic bacteria and molds/yeasts growth on the fruits during the storage. Edible carvacrol/alginate coatings can be considered as a useful alternative to complement the benefits of refrigerated storage by delaying post-harvest spoilage of Andean blueberries.

Effect of yerba mate extract on the performance of starch films obtained by extrusion and compression molding as active and smart packaging

Native or hydrolyzed starch and yerba mate extract (10 wt.% or 20 wt.%) films prepared by extrusion and compression molding were investigated. Native starch material (TPNS) exhibited lower water vapor permeability and higher Young's Modulus (E) compared to hydrolyzed starch matrix (TPHS) but decreases in strain at break (ε_b) and toughness (T). The incorporation of 10 wt.% of extract in TPNS led to greater E and ε_b and it resulted the most hydrophobic material. Conversely, TPHS with 20 wt.% of additive resulted the film with the highest ε_b and T, indicating a plasticizing effect of the extract in this concentration and system. All materials disintegrated after 10 weeks of burial, contributing to waste reduction. Biofilms containing yerba mate extract showed antioxidant activity and color changes in different pH, indicating their promising role as active and smart packaging for food, in accordance with the new trends for biodegradable and functional packaging.

Impact of the Combined Use of Magnetite Nanoparticles and Cellulose Nanocrystals on the Shape-Memory Behavior of Hybrid Polyurethane Bionanocomposites

Hybrid bionanocomposites with shape-memory behavior are reported. The materials were accessed by combining a polyurethane matrix with a highly renewable carbon content, cellulose nanocrystals (CNCs), and magnetite nanoparticles (MNPs). The integration of the two nanoparticle types resulted in tough materials that display a higher stiffness and storage modulus in the glassy and rubbery state, thus contributing to the structural reinforcement, as well as magnetic properties, reflecting a synergistic effect of this combination. A quantitative characterization of the thermoactivated shape-memory effect made evident that the addition of CNCs increases the shape fixity, due to the higher glass transition temperature (T_g) and the higher stiffness below T_g than the neat PU, while the addition of MNPs made it possible to activate the shape recovery by applying an alternating magnetic field. Moreover, the new hybrid bionanocomposites showed good bio- and hemocompatibility.