Effects of hydrosoluble calcium ions and organic acids on citrus oil emulsions stabilized with citrus pectin

Unveiling the Chemistry of Citrus Peel: Insights into Nutraceutical Potential and Therapeutic Applications

The recent millennium has witnessed a notable shift in consumer focus towards natural products for addressing lifestyle-related disorders, driven by their safety and cost-effectiveness. Nutraceuticals and functional foods play an imperative role by meeting nutritional needs and offering medicinal benefits. With increased scientific knowledge and awareness, the significance of a healthy lifestyle, including diet, in reducing disease risk is widely acknowledged, facilitating access to a diverse and safer diet for longevity. Plant-based foods rich in phytochemicals are increasingly popular and effectively utilized in disease management. Agricultural waste from plant-based foods is being recognized as a valuable source of nutraceuticals for dietary interventions. Citrus peels, known for their diverse flavonoids, are emerging as a promising health-promoting ingredient. Globally, citrus production yields approximately 15 million tons of by-products annually, highlighting the substantial potential for utilizing citrus waste in phyto-therapeutic and nutraceutical applications. Citrus peels are a rich source of flavonoids, with concentrations ranging from 2.5 to 5.5 g/100 g dry weight, depending on the citrus variety. The most abundant flavonoids in citrus peel include hesperidin and naringin, as well as essential oils rich in monoterpenes like limonene. The peel extracts exhibit high antioxidant capacity, with DPPH radical scavenging activities ranging from 70 to 90%, comparable to synthetic antioxidants like BHA and BHT. Additionally, the flavonoids present in citrus peel have been found to have antioxidant properties, which can help reduce oxidative stress by 30% and cardiovascular disease by 25%. Potent anti-inflammatory effects have also been demonstrated, reducing inflammatory markers such as IL-6 and TNF-α by up to 40% in cell culture studies. These findings highlight the potential of citrus peel as a valuable source of nutraceuticals in diet-based therapies.

Extraction of pectins from renewable grapefruit (Citrus paradisi) peels using deep eutectic solvents and analysis of their structural and physicochemical properties

This study presents an innovative attempt to extract high-quality pectins from grapefruit (Citrus paradisi) peels by using deep eutectic solvents (DESs) as extraction agents. The maximum yield of betaine-citric acid (BC)-extracted pectin (BC-P) reached 36.47 % under the optimum process conditions: an L/S ratio of 25 mL/g, a pH of 2.0, and a temperature of 85 °C for 120 min. The yield of BC-P was significantly higher than HCl-extracted pectin (HCl-P, 8.76 %) under a pH of 2.0. In addition, the structural, physicochemical, and emulsifying properties of the purified pectins (BC-P and HCl-P) and commercial pectin (CP) were comparatively analyzed. Results showed that BC-P exhibited higher RG-I value, more arabinan side-chains, bigger Mw and Mn value than HCl-P. Moreover, the viscosity, G' and G'' of BC-P were significantly higher than those of HCl-P and CP. More importantly, BC-P demonstrated better emulsifying activity and stability compared to HCl-P and CP. When the concentration of BC-P was increased to 1.50 %, a stable emulsion containing a 50 % soybean oil fraction could be obtained. Our results confirmed that DESs can be considered as high-effective agents for pectin extraction. Pectins extracted from grapefruit peels can be as a promising natural emulsifiers that can be used in the food industry.

Amino acid regulated citrus pectin-based emulsion stability mediated by pH

BACKGROUND

Citrus residuals are rich in nutrients like pectin, essential oil, and amino acids, which are wasted in the food industry. Moreover, citrus components often coexist with amino acids during emulsion preparation and application.

RESULTS

Adding glutamic or arginine after emulsification resulted in a stable emulsion compared with adding them before emulsification. Adding glycine before or after emulsification had no effect on the emulsion stability. Emulsion stability was improved by adding glutamic acid at pH 6. Ionic interaction and hydrogen bonding were the main forms of bonding. The rhamnogalacturonan II domain was the potential binding site for the amino acids.

CONCLUSIONS

The emulsions prepared by adding acidic amino acids or basic amino acids after emulsification were stable relative to those in which the amino acids were added before emulsification. However, the order in which neutral amino acids were added did not affect the emulsion stability after storage for 7 days. With an increase in the pH level, droplet size increased and emulsion stability decreased. All the results could be attributed to changes in the structure and properties of citrus pectin, as well as the interaction between citrus pectin and amino acids. This study may expand the application of citrus-derived emulsions in the food industry. © 2023 Society of Chemical Industry.

Factors that affect Pickering emulsions stabilized by mesoporous hollow silica microspheres

HYPOTHESIS

Classical (solid particles stabilized) Pickering emulsions have been widely studied due to the irreversible adsorption of solid particles at the oil-water interface. Mesoporous hollow silica microspheres (MHSMs) are promising stabilizers for Pickering emulsion owing to its larger specific surface area and lower apparent density. However, this type of Pickering emulsion has not attracted enough attention. The stabilization mechanism of Pickering emulsion by MHSMs has not been studied in detail yet.

EXPERIMENTS

Herein, stable Pickering emulsions were prepared using only MHSMs as stabilizers. In order to investigate its stabilization mechanism, the effect factors of size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio on the stability of Pickering emulsions were analyzed deeply.

FINDINGS

As a result, the stability of Pickering emulsion can be improved by MHSMs with smaller particle size and shell thickness. Also, MHSMs with the intermediate hydrophobicity and suitable oil/water ratio actually do favour for the stability of Pickering emulsion. As expected, the stability of Pickering emulsion can be enhanced by increasing the concentration of MHSMs in a certain range. The Pickering emulsions tend to achieve excellent stable state when the concentration of MHSMs is 1.25 mg/mL. All those results suggested that the stability of Pickering emulsions correlates directly to particle size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio. This research paves a way for the fabrication of functional materials via Pickering emulsions.

Chitosan Gel Prepared with Citric Acid as the Food Acidulant: Effect of the Chitosan Concentration and Gel pH on Physicochemical and Functional Properties of Fish Protein Emulsion Sausages

Citric acid is a popular food acidulant with versatile utility as a preservative and acidity regulator in the meat industry, owing to its unique three pK _a values, which can be combined with the natural biopolymer chitosan to improve food quality. The scientific incorporation of a minimal range of chitosan and pH through organic acid additions for chitosan solubilization in the fish sausages can effectively improve their quality through their synergistic effect. Optimum conditions for emulsion stability, gel strength, and water holding capacity were found to be at a low concentration of chitosan, that is, 0.15 g at pH of 5.0, with their corresponding values of 42.55 ± 0.43 N mm, 94.91 ± 0.24, and 90.67 ± 0.50%. Lower pH ranges increased hardness and springiness values, and higher pH levels increased cohesiveness values at varying ranges of chitosan. Sensory analysis revealed tangy and sour flavors in the samples with lower pH.

Thickening mechanism of recombined dairy cream stored at 4 °C: Changes in the composition and structure of milk protein under different sterilization intensities

This work elucidates the mechanism involved in the effect of varying sterilization intensities on RDC thickening via comparative analysis of the changes in the composition and structure of RDC interfacial protein after storage at 4 °C and at 25 °C. The results showed that pasteurized RDCs (75 °C for 16 s, 90 °C for 5 min) and high-temperature sterilized RDCs (105 °C for 3 min, 115 °C for 7 min and 121 °C for 7 min) did not thicken during storage at 25 °C, and had lower viscosities and higher Ca²⁺ concentrations than those stored at 4 °C. Whey protein (WP) aggregates were found to have been adsorbed at the interface of high-temperature treated RDCs stored at 4 °C, leading to the aggregation of fat globules and, consequently, reversible thickening. However, high-temperature sterilized RDCs underwent into irreversible thickening at 10 d, 7 d and 3 d. This phenomenon was attributed to the large amount of heat-induced whey protein and κ-casein complex that was absorbed on the oil-water interface, with Ca²⁺ bonded to form bridging flocculation, which altered the secondary structure of the interfacial protein to one with increased β-sheet content and decreased random coil content.

Recent Advances in Health Benefits of Bioactive Compounds from Food Wastes and By-Products: Biochemical Aspects

Bioactive compounds, including terpenoids, polyphenols, alkaloids and other nitrogen-containing constituents, exert various beneficial effects arising from their antioxidant and anti-inflammatory properties. These compounds can be found in vegetables, fruits, grains, spices and their derived foods and beverages such as tea, olive oil, fruit juices, wine, chocolate and beer. Agricultural production and the food supply chain are major sources of food wastes, which can become resources, as they are rich in bioactive compounds. The aim of this review is to highlight recent articles demonstrating the numerous potential uses of products and by-products of the agro-food supply chain, which can have various applications.

Synergistic antimicrobial effect and mode of action of palmarosa oil-loaded nanoemulsion and citric acid against Pectobacterium carotovorum

The synergistic antimicrobial activity of palmarosa oil (Cymbopogon martini, PO)-loaded nanoemulsion (PO-NE) and citric acid (CA) against Pectobacterium, the major pathogen for soft-rot disease, was evaluated. The combination of PO-NE and CA (PO-NE + CA) significantly improved the storage stability of PO-NE at 30 °C. Compared to the anti-Pectobacterium activity of alone, PO-NE + CA reduced the minimum inhibitory concentration (MIC) by 1/4 and 1/2, respectively. Bactericidal efficacy of PO-NE + CA against P. carotovorum PCC3 was similar of PO-NE alone in the MIC in time-kill kinetic assay. PO-NE treatment mainly influenced membrane integrity, while CA treatment strongly stimulated intracellular ATP depletion. This synergistic combination effectively reduced the use of PO-NE, imparting a strong flavor note without sacrificing the antimicrobial efficacy against Pectobacterium.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-022-01217-6.

Evaluation of the synergistic effect of plant-based components on the stability of curcuminoid emulsion

In this study, the effect of matrix compounds from natural curcuminoid resources on the stability of curcuminoids and emulsions thereof was evaluated. Curcuminoid emulsions were prepared curcuminoid rich sources (curcuminoid extract, an aqueous turmeric concentrate and turmeric powder) with medium-chain triglyceride oil as lipid phase, lecithin, and pectin as emulsifiers. The curcuminoid emulsions were exposed to light in the visible wavelength range (300 nm–800 nm) at the specific energy input of 0.47 kW/m2 for 7 days and to the temperature of 4 °C, 25 °C, 40 °C for 49 days. The total curcuminoid retention (TC), droplet size (DS) change, instability index (InI), and yellowness reduction (YR) was observed during the storage time. The half-life of curcuminoids in emulsions was increased to 21 h, while the half-life of free curcuminoids was 1.3 h in the light exposure test. The co-compounds from the curcuminoid sources contributed to the emulsion stability by increasing the viscosity. In the thermal exposure test, the matrix compound system retained more than 93% curcuminoids after 49 days of storage at 40 °C, whereas the phase separation increased significantly. However, the TC reduction was independent of the InI change and droplet agglomeration. The YR depended on the TC and the amount of co-components in the emulsion.

Analysis of Key Chemical Components in Aqueous Extract Sediments of Panax Ginseng at Different Ages

Panax ginseng beverages have been some of the most popular plant drinks among consumers in recent years, but they become turbid and sediment are easily formed during production and marketing, these are some of the key issues that affect the quality of the beverages. In this study, we analysed the physicochemical properties of sediments in aqueous extracts of 3- to 6-year-old ginseng, and by tracing the sediment formation process from 0-40 days, we observed that the sediment was gradually beginning on day 10. The solid content of ginseng aged 5 and 6 years was significantly higher than that of ginseng aged 3 and 4 years. There was no significant difference in the sediment amount sediment in the extracts of ginseng of different ages. The light transmittance of the extracts after centrifugation was significantly higher than before centrifugation. Colour-difference analysis found that there was a significant positive correlation between ginseng age and colour-difference value (ΔE). Chemical composition analysis showed that total sugar and proteins were the main components of the sediment. In addition, ginsenosides, amino acids and minerals were also involved in sediment formation to different degrees. A stepwise regression model was established through principal component analysis (PCA), and the regression equation for predicting the sediment amount was obtained as follows: sediment amount (mg/mL) = 2.906 - 0.126 × C_{Total saponins} - 0.131 × C_{Free amino acids}.

Effects of the Incorporation of Calcium Chloride on the Physical and Oxidative Stability of Filled Hydrogel Particles

In this study, the effects of calcium chloride (CaCl2) addition on the physical and oxidative stabilities of filled hydrogel were investigated. The results revealed that CaCl2 significantly enhanced the particle size, interfacial layer thickness, apparent viscosity, and viscoelastic behavior of filled hydrogels and decreased their light and whiteness values (p < 0.05). This phenomenon was mainly attributed to the strong binding ability between Ca2+ and protein/pectin mixtures, which were present in the interfacial area or aqueous phase, as verified by cryo-scanning electron microscopy results. Moreover, lower levels of CaCl2 (2 or 4 mM) significantly enhanced the oxidative stability of filled hydrogels (p < 0.05), particularly at a concentration of 4 mM. However, a higher level of CaCl2 (6 or 8 mM) resulted in an electrostatic shielding effect, which resulted in the aggregation of multiple droplets and the flocculation of the filled hydrogels, which negatively affected the oxidative stability of filled hydrogels. The findings of this study indicated that appropriate Ca2+ levels (4 mM) improved the physical and oxidative stability of filled hydrogel, and this finding may provide useful insights for the development of effective delivery systems for specific applications.

Physicochemical characterization and emulsifying properties evaluation of RG-I enriched pectic polysaccharides from Cerasus humilis

Rhamnogalacturonan I (RG-I) enriched pectic polysaccharides were extracted from Cerasus humilis fruits (RPCF, RG-I: 74.46 %). Structural characterization including FTIR, XRD, NMR, HPAEC and SEM demonstrated that RPCF was a high-methoxy acetylated pectin macromolecule with abundant arabinose and galactose side chains (DM: 53.41 %, MW: 1098 kDa, (Ara + Gal)/Rha: 5.37 %). RPCF afforded additional lipid oxidation stability for emulsions, and exhibited significantly better emulsification performance than citrus pectin. In addition, RPCF formed a weak gel network that stabilized the emulsions (G' > G″). Interestingly, RPCF had behaviors that are divergent from those of commercial high-methoxy pectin because it demonstrated potential in forming sugar-free gels systems. Overall, Cerasus humilis is a new source of pectin rich in RG-I. RPCF can be used as a novel emulsifier with gelling and antioxidant effects, providing its alternative application as a natural emulsifier and rheological modifier in a wide range of products, including those with oil-in-water and low sugar.