Ability of casein hydrolysate-carboxymethyl chitosan conjugates to stabilize a nanoemulsion: Improved freeze-thaw and pH stability

Physicochemical properties of active films of rose essential oil produced using soy protein isolate-polyphenol conjugates for cherry tomato preservation

Soy protein isolate (SPI)-polyphenol conjugates were produced by grafting SPI individually with curcumin, naringenin, and catechin. The resulting conjugates showed better emulsifying properties and were used to develop active films containing rose essential oil. The effect of conjugation on the physicochemical and mechanical properties of these emulsion-based films was evaluated. The results showed that the barrier and mechanical properties of the films were improved when the SPI-polyphenol conjugates were used to emulsify the essential oil; in particular, the SPI-curcumin conjugate showed significant improvement. The improvements on the water vapor and oxygen barrier properties in the films were attributed to the formation of compact structure. Emulsion-based films stabilized by SPI-polyphenol conjugates showed antioxidant and antibacterial activities. They also demonstrated an ability to extend the shelf life of cherry tomatoes, as indicated by better preservation of weight, firmness, and ascorbic acid content.

Effects of enzymatic hydrolysis combined with glycation on the emulsification characteristics and emulsion stability of peanut protein isolate

Peanut protein isolate (PPI) has high nutritional value, but its poor function limits its application in the food industry. In this study, peanut protein isolate was modified by enzymatic hydrolysis combined with glycation. The structure, emulsification and interface properties of peanut protein isolate hydrolysate (HPPI) and dextran (Dex) conjugate (HPPI-Dex) were studied. In addition, the physicochemical properties, rheological properties, and stability of the emulsion were also investigated. The results showed that the graft degree increased with the increase of Dex ratio. Fourier transform infrared spectroscopy (FTIR) confirmed that the glycation of HPPI and Dex occurred. The microstructure showed that the structure of HPPI-Dex was expanded, and the molecular flexibility was enhanced. When the ratio of HPPI to Dex was 1:3, the emulsifying activity and the interface pressure of glycated HPPI reached the highest value, and the emulsifying activity (61.08 m2/g) of HPPI-Dex was 5.28 times that of PPI. The HPPI-Dex stabilized emulsions had good physicochemical properties and rheological properties. In addition, HPPI-Dex stabilized emulsions had high stability under heat treatment, salt ion treatment and freeze-thaw cycle. According to confocal laser scanning microscopy (CLSM), the dispersion of HPPI-Dex stabilized emulsions was better after 28 days of storage. This study provides a theoretical basis for developing peanut protein emulsifier and further expanding the application of peanut protein in food industry.

Effects of thermal treatment on the formation and properties of whey protein isolate/whey protein hydrolysate-sodium hyaluronate complexes

In dairy products, the added sodium hyaluronate may form complexes with proteins, thereby affecting product properties. In the present study, the interaction between whey protein isolate (WPI)/ whey protein hydrolysate (WPH) and sodium hyaluronate (SH) was characterized under thermal treatment at different temperatures (25 ℃, 65 ℃, 90 ℃ and 121 ℃) after studying effects of protein/SH ratio and pH on complex formation. The addition of SH reduced the particle size of WPI/WPH and increased potential value in the system, with greater variation with increasing treatment temperature. The structural properties of complexes were studied. The binding with SH decreased the contents of free amino group and free thiol group, as well as the fluorescence intensity and surface hydrophobicity. FTIR results and browning intensity measurement demonstrated the formation of Maillard reaction products. Moreover, the attachment of SH improved the thermal stability of WPI/WPH and decreased their antigenicity.

Enhancing the stability of O/W emulsions by the interactions of casein/carboxymethyl chitosan and its application in whole nutrient emulsions

The influence of Carboxymethyl chitosan (CMCS) on the emulsification stability mechanism of casein (CN) and its effects on the stability of whole nutrient emulsions were investigated. The complex solutions of CN and CMCS were prepared and the turbidity, ultraviolet (UV) absorption spectrum, fluorescence spectrum, circular dichroism (CD) spectrum, Fourier transform infrared (FTIR) spectrum, interfacial tension and microstructural observations were used to study the inter-molecular interaction of CMCS and CN. The effects of CMCS on the emulsion stability of CN were further analyzed by particle size, ζ-potential, instability index and rheological properties. Moreover, the accelerated stability of whole nutrient emulsions prepared by CMCS and CN was evaluated. The results revealed that CN-CMCS complexes were mainly formed by hydrogen bonding. The stability of the CN-CMCS composite emulsions were improved, as evidenced by the interfacial tension decreasing from 165.96 mN/m to 158.49 mN/m, the particle size decreasing from 45.85 μm to 12.98 μm, and the absolute value of the potential increasing from 29.8 mV to 33.5 mV. The stability of whole nutrient emulsion was also significantly enhanced by the addition of CN-CMCS complexes. Therefore, CN-CMCS complex could be served as a novel emulsifier to improve the stability of O/W emulsions.

Different interfaces for stabilizing liquid-liquid, liquid-gel and gel-gel emulsions: Design, comparison, and challenges

Interfaces play essential roles in the stability and functions of emulsion systems. The quick development of novel emulsion systems (e.g., water-water emulsions, water-oleogel emulsions, hydrogel-oleogel emulsions) has brought great progress in interfacial engineering. These new interfaces, which are different from the traditional water-oil interfaces, and are also different from each other, have widened the applications of food emulsions, and also brought in challenges to stabilize the emulsions. We presented a comprehensive summary of various structured interfaces (stabilized by mixed-layers, multilayers, particles, nanodroplets, microgels etc.), and their characteristics, and designing strategies. We also discussed the applicability of these interfaces in stabilizing liquid-liquid (water-oil, water-water, oil-oil, alcohol-oil, etc.), liquid-gel, and gel-gel emulsion systems. Challenges and future research aspects were also proposed regarding interfacial engineering for different emulsions. Emulsions are interface-dominated materials, and the interfaces have dynamic natures, as the compositions and structures are not constant. Biopolymers, particles, nanodroplets, and microgels differed in their capacity to get absorbed onto the interface, to adjust their structures at the interface, to lower interfacial tension, and to stabilize different emulsions. The interactions between the interface and the bulk phases not only affected the properties of the interface, but also the two phases, leading to different functions of the emulsions. These structured interfaces have been used individually or cooperatively to achieve effective stabilization or better applications of different emulsion systems. However, dynamic changes of the interface during digestion are only poorly understood, and it is still challenging to fully characterize the interfaces.

Arabinoxylan hydrolysates improved physical and oxidative stability of oil-in-water emulsions

This study was to improve the physical and oxidative stability of sodium caseinate (NaCas)-stabilized oil-in-water (O/W) emulsions with arabinoxylan hydrolysates (AXHs). AXHs with different molecular sizes were prepared using xylanase treatment for 0 (AXH0), 30 (AXH30), 60 (AXH60), and 120 (AXH120) min, respectively. Compared with the emulsion without AXHs, all AXHs emulsions showed increased coalescence stability, evidenced by no change occurred in the droplet size with the pH variation from 7.0 to 5.0. Moreover, at pH 7.0 and 5.0, AXH60 and AXH120 emulsions showed no flocculation, coalescence, or creaming before and after 21 d storage. All the AXH samples showed excellent antioxidant capacities, demonstrated by the slow accumulation of lipid hydroperoxides and thiobarbituric acid reactive substances during storage. In sum, rice bran arabinoxylans hydrolyzed ≥60 min possess a potential as effective antioxidants to form physically and oxidatively stable O/W emulsions at pH above the emulsifier pI, and substances with high antioxidant activity below the emulsifier pI still need to be explored.

Classification and design strategies of polysaccharide-based nano-nutrient delivery systems for enhanced bioactivity and targeted delivery: A review

Since many nutrients are highly sensitive, they cannot be absorbed and utilized efficiently by the body. Using nano-delivery systems to encapsulate nutrients is an effective method of solving the problems associated with the application of nutrients at this stage. Polysaccharides, as natural biomaterials, have a unique chemical structure, ideal biocompatibility, biodegradability and low immunogenicity. This makes polysaccharides powerful carriers that can enhance the biological activity of nutrients. However, the true role of polysaccharide-based delivery systems requires an in-depth understanding of the structural and physicochemical characteristics of polysaccharide-based nanodelivery systems, as well as effective modulation of the intestinal delivery mechanism and the latest advances in nano-encapsulation. This review provides an overview of polysaccharide-based nano-delivery systems dependent on different carrier types, emphasizing recent advances in the application of polysaccharides, a biocomposite material designed for nutrient delivery systems. Strategies for polysaccharide-based nano-delivery systems to enhance the bioavailability of orally administered nutrients from the perspective of the intestinal absorption barrier are presented. Characterization methods for polysaccharide-based nano-delivery systems are presented as well as an explanation of the formation mechanisms behind nano-delivery systems from the perspective of molecular forces. Finally, we discussed the challenges currently facing polysaccharide-based nano-delivery systems as well as possible future directions for the future.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Production, Characterization, and In Vitro and In Vivo Studies of Nanoemulsions Containing St. John’s Wort Plant Constituents and Their Potential for the Treatment of Depression

The current project was designed to prepare an oil-in-water (oil/water) hypericin nanoemulsion using eucalyptus oil for the preparation of an oil phase with chitosan as an emulsion stabilizer. The study might be a novelty in the field of pharmaceutical sciences, especially in the area of formulation development. Tween® 80 (Polysorbate) was used as the nonionic surfactant. The nanoemulsion was prepared by using the homogenization technique, followed by its physicochemical evaluation. The surface morphological studies showed the globular structure has a nano-sized diameter, as confirmed by zeta size analysis. The zeta potential analysis confirmed a positive surface charge that might be caused by the presence of chitosan in the formulation. The pH was in the range of 5.14 to 6.11, which could also be compatible with the range of nasal pH. The viscosity of the formulations was found to be affected by the concentration of chitosan (F1-11.61 to F4-49.28). The drug release studies showed that the presence of chitosan greatly influenced the drug release, as it was noticed that formulations having an elevated concentration of chitosan release lesser amounts of the drug. The persistent stress in the mouse model caused a variety of depressive- and anxiety-like behaviors that can be counteracted by chemicals isolated from plants, such as sulforaphane and tea polyphenols. In the behavioral test and source performance test, hypericin exhibited antidepressant-like effects. The results show that the mice treated for chronic mild stress had a considerably higher preference for sucrose after receiving continuous hypericin for 4 days (p = 0.0001) compared to the animals administered with normal saline (p ≤ 0.0001) as well as the naïve group (p ≤ 0.0001). In conclusion, prepared formulations were found to be stable and can be used as a potential candidate for the treatment of depression.

Lycopene-loaded emulsions stabilized by whey protein covalently modified with pectin or/and chlorogenic acid: Enhanced physicochemical stability and reduced bio-accessibility

Lycopene-loaded emulsions were formulated with whey protein isolate (WPI) covalently modified with high methoxylated pectin (HMP) or/and chlorogenic acid (CA) prepared by dry heating or/and alkali grafting. Covalent WPI products were confirmed by SDS-PAGE and degree of graft/CA binding equivalent values. The α-helix and β-sheet percentage, surface hydrophobicity and fluorescence intensity of WPI decreased significantly (p < 0.05) upon binding. Both binary and ternary complexes enhanced the stability of the emulsions, and lycopene retained more after UV irradiation, thermal treatment, storage, compared with emulsions stabilized by WPI, with the best protection by both ternary complexes. In vitro simulated digestion results showed that free fatty acids were released in the order of WPI > WPI-HMP > WPI-CA > WPI-HMP-CA ≈ WPI-CA-HMP. Bio-accessibility analysis showed the same trend as the fatty acid release rate. These results may provide a theoretical basis for applications of conjugating protein with polysaccharide or/and polyphenol emulsions.

Synergistic effects of psyllium husk powder and different levels of methylcellulose on the storage stability of sodium caseinate emulsion

The study investigated the effects of compound fibers composed of psyllium husk powder (PHP, 0.3%) and methylcellulose (MC, 0, 0.3, 0.6, 0.9, and 1.2%) on the storage stability, rheology, and microstructure of sodium caseinate emulsions. Results showed that the emulsion stability was enhanced with the increased concentrations of MC, especially at the concentration of 1.2%. The oil droplet size in the emulsions was decreased as the concentrations of compound fibers increased, which was further confirmed by the optical microscope analysis. The rheological measurements and cryo-scanning electron microscopy results indicated that compound fibers improved the viscosity of the emulsions, and formed a strong three-dimensional network structure. The results of confocal laser scanning microscope and surface protein concentration measurements showed that compound fibers were evenly distributed into the oil droplet surface. The above results demonstrate that compound fibers are an effective thickener and emulsifier in enhancing the stability properties of oil-in-water (O/W) emulsions stabilized by sodium caseinate.

Optimization of enzymatic soy protein isolate-glucosamine conjugates to improve the freeze-thaw stability of emulsion

BACKGROUND

Using transglutaminase (TGase) is a new method to improve protein properties in order to promote protein glycosylation. This article mainly studies soy protein isolate (SPI) and glucosamine to improve the freeze-thaw stability of emulsion under the action of TGase. The degree of glycosylation was studied by the content of free amino groups and the degree of conjugation. The optimal conditions for preparing soy protein isolate-glucosamine (SPI-G) conjugate were determined by a response surface optimization model based on single-factor experiments using the creaming index of the emulsion after the first freeze-thaw cycle as the response value.

RESULTS

The results showed that the emulsion had the lowest creaming index when the conditions of protein concentration was 20 g L^-1 , mass ratio of SPI-G was 5:3 (w/w), enzyme addition amount was 10 U g^-1 , and reaction time was 2 h. The optimized modified product was measured for the creaming index after the first freeze-thaw cycle. It was found that the creaming index of the modified product SPI-G after the first freeze-thaw cycle was 9.02%, which was less than and close to the optimized model predicted value. The creaming index and optical microscopy results after three freeze-thaw cycles confirmed that the freeze-thaw stability of the SPI-G samples was significantly enhanced after optimization of the response surface model.

CONCLUSION

It showed that glycosylation promoted by TGase could improve the freeze-thaw stability of SPI emulsion, thereby broadening the application of SPI in food. © 2022 Society of Chemical Industry.

Understanding of the key factors influencing the properties of emulsions stabilized by sodium caseinate

Emulsions can be easily destabilized under various conditions during preparation and storage. Therefore, it is necessary to understand the factors that influence the stability of emulsions, which is essential for their subsequent studies. Sodium caseinate (CAS) is a well-used nutritional and functional ingredient in emulsion preparation due to its good solubility and emulsifying properties. CAS-stabilized emulsions can be considered good food emulsion delivery systems, but their applications are still limited under certain conditions due to their instability to creaming and aggregation. Therefore, the purpose of this review is to provide a complete overview of how different environmental stresses and processing conditions affect the stability of CAS-stabilized emulsions and how to improve their stability. Initially, the general properties of CAS as emulsifiers and the characterization of CAS-stabilized oil-in-water (O/W) emulsions were summarized. Second, the major instability mechanisms that operate in CAS-stabilized emulsions were presented. Furthermore, the general factors such as pH, emulsifier concentration, ionic strength, oxidation, and processing conditions, affecting the stability of CAS-stabilized O/W emulsion, were discussed. On this basis, the commonly used methods for evaluating emulsion stability are introduced. Finally, state-of-the-art strategies to improve CAS-based emulsion stability are also described and summarized. This review is expected to provide a theoretical basis for the future applications of CAS in food emulsions.

Fabrication and Characterization of Chitosan-Pea Protein Isolate Nanoparticles

Chitosan (CS) and pea protein isolate (PPI) were used as raw materials to prepare nanoparticles. The structures and functional properties of the nanoparticles with three ratios (1:1, 1:2 1:3, CS:PPI) were evaluated. The particle sizes of chitosan-pea protein isolate (CS-PPI) nanoparticles with the ratios of 1:1, 1:2, and 1:3 were 802.95 ± 71.94, 807.10 ± 86.22, and 767.75 ± 110.10 nm, respectively, and there were no significant differences. Through the analysis of turbidity, endogenous fluorescence spectroscopy and Fourier transform infrared spectroscopy, the interaction between CS and PPI was mainly caused by electrostatic mutual attraction and hydrogen bonding. In terms of interface properties, the contact angles of nanoparticles with the ratio of 1:1, 1:2, and 1:3 were 119.2°, 112.3°, and 107.0°, respectively. The emulsifying activity (EAI) of the nanoparticles was related to the proportion of protein. The nanoparticle with the ratio of 1:1 had the highest potential and the best thermal stability. From the observation of their morphology by transmission electron microscopy, it could be seen that the nanoparticles with a ratio of 1:3 were the closest to spherical. This study provides a theoretical basis for the design of CS-PPI nanoparticles and their applications in promoting emulsion stabilization and the delivery of active substances using emulsions.

Effects of High-Intensity Ultrasound Treatments on the Physicochemical and Structural Characteristics of Sodium Caseinate (SC) and the Stability of SC-Coated Oil-in-Water (O/W) Emulsions

The effects of high-intensity ultrasound treatment (0, 3, 6, 9 min) on physicochemical and structural characteristics of SC and the storage, thermal and freeze–thaw stability of SC O/W emulsions were investigated. The results showed that ultrasound treatment reduced the particle size of SC, although there were no obvious changes in zeta potential, profiles and weights. Ultrasound treatment improved surface hydrophobicity and fluorescence intensity of SC and changed ultraviolet–visible (UV–Vis) spectroscopy but had no influence on the secondary structure of SC. This indicates that ultrasounds might destroy the tertiary structure but leave most of the integral secondary structure. A scanning electron microscope (SEM) also showed that ultrasound-treated SC presented small aggregates and a loose structure. The physicochemical and structural changes of SC benefited the ability of protein adsorbing oil droplets and emulsion stability. Under stresses such as storage, thermal and freeze–thawing, the oil droplets of treated emulsions were still uniform and stable, especially at 6 min and 9 min. Overall, the high-intensity ultrasounds made the SC present small aggregates and a loose structure improving the SC O/W emulsions stability under storage, thermal and freeze–thawing environment and have great potential to stabilize the SC prepared O/W emulsions.

Fabrication and characterization of a cannabidiol-loaded emulsion stabilized by a whey protein-maltodextrin conjugate and rosmarinic acid complex

A cannabidiol (CBD)-loaded oil-in-water emulsion stabilized by a whey protein (WP)-maltodextrin (MD) conjugate and rosmarinic acid (RA) complex was fabricated, and its stability characteristics were investigated under various environmental conditions. The WP-MD conjugates were formed via dry-heating. The interaction between WP and MD was assessed by browning intensity, reduced amount of free amino groups, the formation of high molecular weight components in sodium dodecyl sulfate-PAGE, and changes in secondary structure of whey proteins. The WP-MD-RA noncovalent complex was prepared and confirmed by fluorescence quenching and Fourier-transform infrared spectroscopy spectra. Emulsions stabilized by WP, WP-MD, and WP-RA were used as references to evaluate the effect of WP-MD-RA as a novel emulsifier. Results showed that WP-MD-RA was an effective emulsifier to produce fine droplets for a CBD-loaded emulsion and remarkably improved the pH and salt stabilities of emulsions in comparison with WP. An emulsion prepared with WP-MD-RA showed the highest protection of CBD against UV and heat-induced degradation among all emulsions. The ternary complex kept emulsions in small particle size during storage at 4°C. Data from the current study may offer useful information for designing emulsion-based delivery systems which can protect active substance against environmental stresses.

Biodegradable Nanoparticles Prepared from Chitosan and Casein for Delivery of Bioactive Polysaccharides

Ophiopogon japonicus polysaccharides (OJPs) have great anti-inflammation and immunomodulatory abilities. However, the low bioavailability of OJPs reduces its applicability in the biomedical and pharmaceutical fields. Chitosan (CS) has excellent mucoadhesive properties and absorption-enhancing ability in oral administration. Casein hydrolysate (CL) has good interfacial diffusivity and emulsifying ability, and can interact with polysaccharides to form complexes combining the individual properties of both. Therefore, chitosan and casein hydrolysate are good candidates for developing nanoformulations for oral delivery. In this study, bioactive polysaccharides (OJPs), CS and CL, were combined to prepare CS/OJPs/CL co-assembled biodegradable nanoparticles. The interactions between polysaccharides (CS and OJPs) and peptide (CL) resulted in the formation of nanoparticles with an average particle size of 198 nm and high OJPs loading efficiency. The colloidal properties of the nanoparticles were pH-dependent, which were changed significantly in simulated digestive fluid at different pH values. OJPs released from the CS/OJPs/CL nanoparticles were greatly affected by pH and enzymatic degradation (trypsin and lysozyme). The nanoparticles were easily internalized by macrophages, thereby enhancing the OJPs’ inhibitory ability against Ni²⁺-induced cytotoxicity and LPS-induced nitric oxide production. This study demonstrates that prepared polysaccharide/protein co-assembled nanoparticles can be potential nanocarriers for the oral delivery of bioactive polysaccharides with anti-inflammatory functions.

Recent advances on formation mechanism and functionality of chitosan-based conjugates and their application in o/w emulsion systems: A review

Chitosan is very attractive in the food industry due to its good biocompatibility and high biodegradability. In particular, it can be used as a preferred material for the fabrication of stabilizers in emulsion-based foods. However, poor solubility and antioxidant activity limit its wide application. The functionality of chitosan can be extended by forming chitosan-based conjugates, which can be used to modulate the characteristics of the oil-water interface, thereby improving the stability and performance of the o/w emulsions. This review highlights the recent progress of chitosan-based conjugates, focusing on the classification, formation mechanism and functional properties, and the applications of these conjugates in o/w emulsions are summarized. Lastly, the promising research trends and challenges of chitosan-based conjugates and their emulsion systems in this field are also discussed. This review will provide a theoretical basis for the wide application of chitosan-based conjugates in emulsion systems.

Recent application of protein hydrolysates in food texture modification

The demand for clean labels has increased the importance of natural texture modifying ingredients. Proteins are unique compounds that can impart unique textural and structural changes in food. However, lack of solubility and extensive aggregability of proteins have increased the demand for enzymatically hydrolyzed proteins, to impart functional and structural modifications to food products. The review elaborates the recent application of various proteins, protein hydrolysates, and their role in texture modification. The impact of protein hydrolysates interaction with other food macromolecules, the effect of pretreatments, and dependence of various protein functionalities on textural and structural modification of food products with controlled enzymatic hydrolysis are explained in detail. Many researchers have acknowledged the positive effect of enzymatically hydrolyzed proteins on texture modification over natural protein. With enzymatic hydrolysis, various textural properties including foaming, gelling, emulsifying, water holding capacity have been effectively improved. It is evident that each protein is unique and imparts exceptional structural changes to different food products. Thus, selection of protein requires a fundamental understanding of its structure-substrate property relation. For wider applicability in the industrial sector, more studies on interactions at the molecular level, dosage, functionality changes, and sensorial attributes of protein hydrolysates in food systems are required.

Effect of chitosan oligosaccharide glycosylation on the emulsifying property of lactoferrin

There is fast increasing interest in the development of alimentary protein stabilized emulsions due to their potential applications in functional food fields. This work studied the effect of glycation degree with chitosan oligosaccharide (COS) on the emulsifying properties of lactoferrin (LF) through Maillard reaction. In the present study, SDS-PAGE and FT-IR were used to confirm LF and COS covalently binding together successfully. Intrinsic fluorescence showed that glycation with COS led more hydrophobic groups exposed to the surface of the structure and particle size increase of LF. Emulsions with 50% (v/v) oil phase and protein concentration of 2% (w/v) was fabricated through one-step shear method. Compared with native LF, emulsions stabilized by LF-COS conjugates showed smaller droplet size and lower creaming index (CI). Among these samples, LF-COS conjugates under 4 h had the best emulsifying efficiency and stability, the emulsion droplet size and the CI of which decreased 39.66% and 28.55% compared with LF, respectively. Furthermore, glycation with COS enhanced the interfacial activity of LF leading to more adsorbing amount and forming thicker layer on the droplets and gel network in the emulsions. This finding would make sense to further understand the modification of emulsifying properties of alimentary proteins through glycosylation with saccharides and develop novel protein-based emulsifiers.

Physicochemical properties of films produced using nanoemulsions stabilized by carboxymethyl chitosan-peptide conjugates and application in blueberry preservation

Carboxymethyl chitosan (CMCh)-peptide conjugates were produced by grafting CMCh with peptides from hemp seed, maize and casein. The nanoemulsions stabilized by these conjugates had smaller droplet size and better emulsifying properties. Nanoemulsions stabilized by conjugates were used to develop active films containing Camellia essential oil and the effect of conjugation on physicochemical properties of resulting films was evaluated. Water vapor and oxygen barrier properties, tensile strength, flexibility, and temperature of endothermic peak increased 6.6-19.8% and 6.9-27.2%, 40.1-96.6%, 61.4-83.3% and 7.8-18.5%, respectively when the CMCh-peptide conjugates were used to emulsify the essential oil. The conjugation helped to form compact structure. All of the films containing essential oil emulsions stabilized by conjugates showed the ability to extend the shelf-life of blueberry by maintaining the firmness, reducing the weight loss and slowing down the formation of soluble solids.

Preparation and characterization of glycosylated protein nanoparticles for astaxanthin mitochondria targeting delivery

Novel mitochondria targeting nanocarriers were prepared using triphenylphosphonium bromide (TPP)-modified whey protein isolate (WPI)-dextran (DX) conjugates by self-assembly method for astaxanthin mitochondria targeting delivery. The nanocarriers of astaxanthin-loaded WPI-DX and astaxanthin-loaded TPP-WPI-DX were 135.26 and 193.64 nm, respectively, which exhibited a spherical structure and good dispersibility. The mitochondria targeting nanocarriers had good stability in the stimulated blood fluid. In vitro experiments indicated that the TPP-modified nanocarriers could effectively realize lysosomes escape, and specifically accumulate in the cell mitochondria. Simultaneously, the astaxanthin-loaded nanocarriers could significantly reduce reactive oxygen species generation produced from hydrogen peroxide, protect the normal levels of the mitochondrial membrane potential, and dramatically promote the vitality of leukemia cells in mouse macrophage (RAW 264.7) cells. The present study highlights the promising application of mitochondria targeting nanocarriers for enhanced delivery of astaxanthin.

Effect of glycosylation with sugar beet pectin on the interfacial behaviour and emulsifying ability of coconut protein

The aim of the present study was to investigate the effect of glycosylation with sugar beet pectin (SBP) on the interfacial behaviour and emulsifying ability of coconut protein (CP). The physical stabilities of the emulsions were predicted by transmission variation, droplet distribution and zeta potentials. The results showed that SBP-CP-stabilized emulsions showed better stability during centrifugation than those stabilized by CP because SBP-CP reduced the degree of variation in the CP transmission profile. The adsorption kinetics of all emulsifiers at the oil-water interface were determined to investigate the relationship between the interfacial behaviour and emulsion stability. The presence of SBP considerably reduced the adsorption rate of CP (0.698 mN/m/s^1/2) and hampered the development of a highly viscoelastic network at the oil-water interface. The values of the dilatational elastic modulus (E_d = 19.477 mN/m) and dilatational viscous modulus (E = 19.719 mN/m) were approximately equal, indicating that the adsorption process was mainly dominated by elastic behaviour. Additionally, the SBP-CP interaction enhanced the dilatational property of the CP-absorbed layer.

Oil-in-water Pickering emulsion stabilization with oppositely charged polysaccharide particles: chitin nanocrystals/fucoidan complexes

BACKGROUND

Chitin nanocrystals (ChN) are insoluble particles that can be used as stabilizers for Pickering emulsions. Their unique cationic properties and antibacterial activity have generated considerable interest among researchers. However, ChN have remained largely underexplored. Furthermore, the droplets of the emulsions stabilized by ChN are as large as 10-100 μm, and their physical stability requires further improvement. Some studies have shown that the spontaneous reaction of oppositely charged particles can effectively stabilize the emulsions. Positively charged ChN and negatively charged fucoidan (F) were therefore compounded to stabilize Pickering emulsions, and the stability of these emulsions was analyzed qualitatively.

RESULTS

The results showed that the composite particles comprising two polysaccharides in a mass ratio of 1:1 and at a pH of 2 (ChN₁ -F₁ -pH 2) possessed the lowest sulfate content (20.1%) and almost zero potential (-3 mV), indicating a high degree of neutralization of the positively charged amino group in ChN and the negatively charged sulfate group in F. Meanwhile, ChN₁ -F₁ -pH 2 displayed a dense network structure that improved the dispersibility and wettability (contact angle = 9.3°). Fourier transform infrared spectroscopy results confirmed that ChN and F were effectively combined through electrostatic interaction or neutralization to produce a polyelectrolyte complex. Furthermore, the particle size of the Pickering emulsion stabilized by ChN-F was significantly reduced, and the maximum size did not exceed 10 μm; the physical and storage stability also improved. The ChN₁ -F₁ -pH 2 emulsion presented excellent storage stability; in particular, the emulsions stabilized by ChN₁ -F₁ -pH 5 and ChN₁ -F₁ -pH 6 exhibited excellent flocculation stabilities.

CONCLUSION

The size of the emulsion droplets stabilized by the oppositely charged polysaccharide particles (ChN-F complexes) reduced significantly. Furthermore, by changing the mass ratio and pH, the microstructure and binding degree of the complexes can be adjusted, thereby promoting their adsorption on the oil-water interface and improving the stability of the Pickering emulsion. © 2020 Society of Chemical Industry.

A family of chitosan-peptide conjugates provides broad HLB values, enhancing emulsion's stability, antioxidant and drug release capacity

Strong hydrophilicity of polysaccharide and physicochemical instability of peptides limit application of polysaccharide-peptide mixtures in food industry. In this study, a natural resource platform of polysaccharide-peptide conjugates was constructed through Maillard reaction from chitosan and casein hydrophobic peptide. By choosing the molecular weight and deacetylation degree of chitosan and other reaction parameters, the conjugated chitosan-peptides possess extensive HLB values from 6 to 14 were obtained with grafting degree of 3.10%-15.08%. The conjugates have gained dramatically improved emulsifying ability, and endowed the emulsion higher antioxidant capacity than the peptide, chitosan and the mixture of peptide-chitosan has. Emulsions prepared with all conjugates exhibited long-term stability and strengthened tolerance towards temperature and electrolyte stimuli. This stable emulsion system also provided an effective encapsulation, protection and controlled release of curcumin, which may provide a method for transfer polysaccharides to stable emulsifiers with broader HLB values and application.

A composite chitosan derivative nanoparticle to stabilize a W1/O/W2 emulsion: Preparation and characterization

For preparing stable water-in-oil-in-water emulsion, the role of nanoparticles in stabilizing the interface is very important. In this study, chitosan hydrochloride-carboxymethyl chitosan (CHC-CMC) nanoparticles were prepared considering electrostatic interactions; then the emulsion was prepared and the stability characteristics in presence of NaCl (0-200 mmol/L) and 30 d storage were studied. CHC-CMC nanoparticles (261 nm) were obtained when the CHC: CMC ratio was 1:2. CHC-CMC formation was verified by FT-IR when a new peak appeared at 1580 cm^-1; W₂ contained 2 wt % CHC-CMC and W₁ contained 1 wt % sodium alginate, the creaming index (81.6 %) was higher for the emulsions than Tween 80 (67.4 %) after 30 d. Confocal laser scanning microscopy confirmed the double microstructures, in contrast to the collapse with Tween 80, because the CHC-CMC nanoparticles were densely adsorbing on the oil-water interface. This indicates that CHC-CMC has a stronger ability to stabilize W₁/O/W₂ emulsion than Tween 80.