Emulsion stability of sugar beet pectin increased by genipin crosslinking

A critical review of persimmon-derived pectin: Innovations in extraction, structural characterization, biological potentials, and health-promoting effects

Persimmon-derived pectin (PP) is a versatile dietary polysaccharide with considerable industrial and biological significance, demonstrating a range of functionalities and health-promoting benefits. This review explores the changes in PP during postharvest and processing, detailing structural alterations and extraction techniques for optimal characteristics. Key functional attributes of PP-such as emulsification, rheology, antioxidant capacity, immunomodulation, and gut microbiota regulation-highlight its potential applications in food, healthcare, pharmaceuticals, and cosmetics. The review also explores methods to enhance the functional properties of PP through synergistic interactions with polyphenols. A strategic roadmap for advancing PP research is proposed, connecting extraction methods, structural characteristics, and functional properties to tailor PP for specific applications in food science and technology. Overall, persimmon-derived pectin is positioned as a valuable food-derived bioactive ingredient with diverse capabilities, poised to drive innovation and advance nutritional science across multiple sectors.

Synthesis, structural characterization and in vitro digestion stability of a soluble soybean polysaccharide‑zinc chelate

The chelation reaction of soluble soybean polysaccharide (SSPS) with zinc was investigated. Using response surface methodology, the optimum parameters for SSPS-Zn synthesis were obtained: pH 5.3, SSPS-ZnCl2 mass ratio of 9.44:1, reaction temperature 50.44 °C, and reaction time 1.5 h, with the highest zinc content of 24.73 %. Compared with SSPS, SSPS-Zn increased in rhamnogalacturonan content and decreased in that of neutral monosaccharides (Fuc, Ara, Gal, Glu and Xyl). UV-vis spectra indicated that SSPS-Zn was lower than SSPS in protein content. FTIR spectra indicated that CO group of SSPS was bonded to Zn2+. X-ray diffraction spectra demonstrated that SSPS-Zn had higher crystallinity. Congo red reactions showed that SSPS possessed a triple-helix conformation while SSPS-Zn formed an irregular free-coiled conformation. EDX confirmed SSPS-Zn synthesis successfully. TGA curves exhibited that SSPS-Zn required higher temperature to undergo degradation. AFM revealed that SSPS-Zn was clustered while SSPS was filamentous. SEM micrographs showed the cracked fragments on the surface of SSPS-Zn. By in vitro simulation of gastrointestinal digestion, Zn2+ release reached 68.87 % after 2 h digestion. Consequently, the chelation of SSPS with zinc could change structure and provide a basis for research and application of novel zinc supplements.

Effect of Sinapine on Microstructure and Anti-Digestion Properties of Dual-Protein-Based Hydrogels

Sinapine is a natural polyphenol from the cruciferous plant family that has anti-aging effects but is low in bioavailability. To improve the bioavailability and therapeutic effect of sinapine, sinapine-crosslinked dual-protein-based hydrogels were prepared using soy protein isolate as a cross-linking agent. The preparation conditions were optimized by single-factor experiments, and the optimal ratios were obtained as follows: the concentration of sinapine was 300 μg/mL; the water-oil ratio was 1:3. The encapsulation rate was greater than 95%, and the drug loading capacity was 3.5 mg/g. In vitro, digestion experiments showed that the dual-protein-based hydrogels as a drug carrier stabilized the release of sinapine and improved the bioavailability of sinapine by 19.3%. The IC50 of DPPH antioxidants was 25 μg/mL as determined by in vitro digestion, and the antioxidant capacity of ABTS was about 20% higher than that of glutaraldehyde control. This is due to the addition of sinapine to enhance the antioxidant properties of the system. It can be seen that the developed hydrogels have potential applications in related fields, such as food nutrition fortification and drug delivery.

Fabrication and characterization of electrospun core-shell nanofibers of bilayer zein/pullulan emulsions crosslinked by genipin

In this study, the electrospun core-shell nanofibers of zein/pullulan stabilized bilayer emulsions before and after genipin crosslinking were fabricated. The experimental results indicated that the addition of pullulan increased the apparent viscosity and elastic modulus of the bilayer emulsions, which was further increased after the chemical crosslinking of genipin. The nanofiber diameter increased from 102.9 nm to 169.9 nm with the increasing ratio of pullulan, but increased significantly to a range of 405.6-708.0 nm after genipin crosslinking. The electrospun nanofiber films of crosslinked emulsions had higher thermal stability and stronger water stability. The FTIR result proved the existence of hydrogen bond interaction between the zein, pullulan, and genipin molecules. In addition, before and after crosslinking, the encapsulation efficiency of electrospun fiber films for camellia oil was >77.68 %, and the maximum encapsulation efficiency could reach 87.94 %, and there was no significant change during the 7-day storage period, showing good stability. These research results can provide a theoretical basis for the encapsulation of hydrophobic active substances in zein-based emulsion electrospun core-shell nanofibers.

Structure, rheology and stability of walnut oleogels with different carboxylation degree of cellulose nanofiber

The effects of carboxylation degree (0.3-2.4 mmol/g) of cellulose nanofiber (CNF) on the microstructure and mechanical properties of edible walnut oleogels were comprehensively examined. The oleogels were well prepared by emulsion-templated approach for potential substitute of conventional saturated or trans-fats in food products. The results demonstrated that the oil-binding capacity (OBC) and textural strength of oleogels enhanced with the increase of CNF carboxyl content, while the structural strength (G' in rheological measurement) and the resistance to shear thinning was first decreased and then increased. It possibly reflected the competition on the dominant structuring mechanism by hydrogen bonding from cellulose hydroxyl groups and electrostatic interactions from -COONa function. With the combined mechanism, oleogel with low structural strength and relatively high OBC (CNF carboxyl content of 1.2 mmol/g, OBC >83 %, G' ≈ 7 × 104 Pa and firmness of 0.30 N) and oleogel with enough structural rigidity and high OBC (CNF carboxyl content of 1.8 mmol/g, OBC >89 %, G' of up to 1.7 × 105 Pa, and firmness of up to 0.66 N) were both fabricated. This reveals the feasibility of regulating oleogel structure and textual properties by using CNF as the unique oleogelator and simply changing its surface carboxyl function.

Effect of structural characteristics on the physicochemical properties and functional activities of dietary fiber: A review of structure-activity relationship

Dietary fibers come from a wide range of sources and have a variety of preparation methods (including extraction and modification). The different structural characteristics of dietary fibers caused by source, extraction and modification methods directly affect their physicochemical properties and functional activities. The relationship between structure and physicochemical properties and functional activities is an indispensable basic theory for realizing the directional transformation of dietary fibers' structure and accurately regulating their specific properties and activities. In this paper, since a brief overview about the structural characteristics of dietary fiber, the effect of structural characteristics on a variety of physicochemical properties (hydration, electrical, thermal, rheological, emulsifying property, and oil holding capacity, cation exchange capacity) and functional activities (hypoglycemic, hypolipidemic, antioxidant, prebiotic and harmful substances-adsorption activity) of dietary fiber explored by researchers in last five years are emphatically reviewed. Moreover, the future perspectives of structure-activity relationship are discussed. This review aims to provide theoretical foundation for the targeted regulation of properties and activities of dietary fiber, so as to improve the quality of their applied products and physiological efficiency, and then to realize high value utilization of dietary fiber resources.

Ficus awkeotsang Makino pectin in acidic environments: Insights into pectin structure, gelation behavior, and gel properties

This study demonstrated the gelation capacity, gelation behavior, and mechanism of Ficus awkeotsang Makino pectin (JFSP) in acidic media (pH 3.4-4.5). JFSP exhibited an extraordinary ability to spontaneously form a gel at a low polymer concentration (0.3 %, w/v) within the pH range of 3.75-4.05 at room temperature, without the need to introduce exogenous metal ions or co-solutes. Analysis of zeta potential and carboxyl dissociation extent revealed the protonation of free carboxyl groups within JFSP under acidic conditions. Atomic force microscopy and small angle X-ray scattering elucidated the aggregation morphology and folding conformation of JFSP. At pH 3.8, the correlation length (ξ) of JFSP chains decreased to around 1.67 nm. Rheological experiments confirmed the formation of a stronger gel network at pH 3.8 and 4.0, with good thermal and freeze-thaw stability. Isothermal Titration Calorimetry (ITC), temperature sweeps, and gelation force analyses emphasized the pivotal role of hydrogen bonds in JFSP gels at pH 3.8 and 4.0. Further reducing the pH to 3.4-3.6 disrupted the dynamic equilibrium of gel-driving forces, leading to the formation of a flocculated gel network. These findings deepen our understanding of JFSP behavior in low-acid conditions, which may be useful for further food formulations at these conditions.

Study on the structural characteristics and emulsifying properties of chickpea protein isolate-citrus pectin conjugates prepared by Maillard reaction

Chickpea protein isolate (CPI) typically exhibits limited emulsifying properties under various food processing conditions, including pH variations, different salt concentrations, and elevated temperatures, which limits its applications in the food industry. In this study, CPI-citrus pectin (CP) conjugates were prepared through the Maillard reaction to investigate the influence of various CP concentrations on the structural and emulsifying properties of CPI. With the CPI/CP ratio of 1:2, the degree of graft reached 35.54 %, indicating the successful covalent binding between CPI and CP. FT-IR and intrinsic fluorescence spectroscopy analyses revealed alterations in the secondary and tertiary structures of CPI after glycosylation modification. The solubility of CPI increased from 81.39 % to 89.59 % after glycosylation. Moreover, freshly prepared CPI emulsions showed an increase in interfacial protein adsorption (70.33 % to 92.71 %), a reduction in particle size (5.33 μm to 1.49 μm), and a decrease in zeta-potential (-34.9 mV to -52.5 mV). Simultaneously, the long-term stability of the emulsions was assessed by employing a LUMiSizer stability analyzer. Furthermore, emulsions prepared with CPI:CP 1:2 exhibited excellent stability under various environmental stressors. In conclusion, the results of this study demonstrate that the glycosylation is a valuable approach to improve the emulsifying properties of CPI.

Acid-induced conformation regulation of peanut polysaccharide and its effect on stability and digestibility of oil-in-water emulsion

BACKGROUND

Developing the stable and healthy emulsion-based food is in accord with the needs of people for health. In the present study, acidification at pH 3.0 of peanut polysaccharide (APPSI) was employed to regulate its conformation and further improve its advantages in preparing oil-in-water emulsion.

RESULTS

The results indicated that acidification induced conversion of PPSI aggregates into linear chains. Increasing concentration promoted formation of cross-linked network structure shown in transmission electron microscopy images. Consequently, the viscosity, yield stress, storage modulus and flow activation energy significantly increased, further fabricating gel structure. Moreover, aggregation behavior suggested that more exposed proteins were involved in gel structure, thereby forming many hydrophobic cores as verified by fluorescence spectroscopy of pyrene. Afterwards, emulsion characteristics indicated that APPSI produced strong and thick steric hindrance around oil droplets and the coil-like interweaved chains locked the continuous phase, bringing strong elasticity and resistance to stress and creaming. Meanwhile, the lower fatty acid in APPSI-emulsion was released after simulated gastrointestinal digestion, mainly as a result of the high retention ratio of emulsion droplets. Furthermore, the elastic and viscous Lissajous curves suggested that the structure strength of APPSI-emulsion was similar to that of the salad dressing within the strain 53.22%.

CONCLUSION

The conformation of PPSI after acidification at pH 3.0 was suitable for preparing the stable emulsion. The obtained emulsion could resist digestion and maintain a strong structure, comprising a cholesterol-free and low-fat salad dressing substitute. © 2023 Society of Chemical Industry.

Development of sorghum arabinoxylan-soy protein isolate composite nanoparticles for delivery of curcumin: Effect of polysaccharide content on stability and in vitro digestibility

The purpose of this study was to fabricate composite nanoparticles using soy protein isolate (SPI) and sorghum bran arabinoxylan (AX) for the delivery of curcumin (Cur). The influences of AX concentrations on the physicochemical characteristic, stability and bioaccessibility of curcumin were investigated. The findings showed that the encapsulation efficiency of curcumin obviously increased upon incorporating AX in comparison to SPI-Cur particles. Hydrogen bonds and hydrophobic interactions were the primary driving forces for the formation of SPI-Cur-AX nanoparticles (SCA). SCA nanoparticles with 1.00 % AX exhibited a uniform size with orderly distribution, suggesting its remarkable physical stability due to the strengthened electrostatic repulsion. However, excessive AX led to aggregation of particles, a noticeable increase in size, and subsequently, a reduction in stability. Due to the heightened free radical scavenging capacity of sorghum AX, SCA nanoparticles exhibited superior antioxidant capabilities. Compared to free curcumin, encapsulation within composite particles significantly enhanced the retention rate and bioaccessibility of curcumin. This improvement was attributed to the potent emulsification ability of AX, which coordinated with bile salt to promote the transfer of curcumin into micelles. The research provides an effective strategy for developing food-grade delivery carriers aimed at enhancing dispersibility, stability and bioaccessibility of the fat-soluble bioactives.

Characterization of the Mechanical, Biodegradation, and Morphological Properties of NBR/Biopolymer Blend, Integrated with a Risk Evaluation

Biopolymer blends have attracted considerable attention in industrial applications due to their notable mechanical properties and biodegradability. This work delves into the innovative combination of butadiene-acrylonitrile (referred to as NBR) with a pectin-based biopolymer (NGP) at a 90:10 mass ratio through a detailed analysis employing mechanical characterization, Fourier transform infrared (FTIR) analysis, thermogravimetric analysis (TGA), and morphology studies using SEM. Additionally, biopolymer's biodegradability under aerobic and anaerobic conditions is tested. The study's findings underscore the superior tensile strength and elongation at break of the NGP/NBR blend in comparison to pure NBR, while also exhibiting a decrease in puncture resistance due to imperfect bonds at the particle-matrix interfaces, necessitating the use of a compatibilizer. In anaerobic conditions, evaluation of biodegradable properties reveals 2% and 12% biodegradability in NBR and NGP/NBR blend, respectively. The degradation properties were also aligned with TGA results highlighting a lower decomposition temperature for NGP. Additionally, this research integrates the application of a conditional value-at-risk (CVaR)-based analysis of the blend's tensile properties to evaluate the uncertainty impact in the experiment. Under risk, a significant enhancement in the tensile performance (by 80%) of the NGP/NBR blend was shown compared to pure NBR. Ultimately, the study shows that adding pectin to the NBR compound amplifies the overall performance of the biopolymer significantly under select criteria.

Genipin, a natural blue colorant precursor: Source, extraction, properties, and applications

Natural cross-linkers are extensively employed due to their low toxicity and biocompatibility benefits. Genipin acts as a precursor for producing blue colorants. The formation of these colorants involves the cross-linking reaction between genipin and primary amines present in amino acids, peptides, and proteins. Genipin is extracted from Gardenia jasminoides and Genipa americana. This article explains the cross-linking mechanism of genipin with proteins/polysaccharides to provide an overall understanding of its properties. Furthermore, it explores new sources of genipin and innovative methodologies to make the genipin recovery process efficient. Genipin increases food products' texture, gel strength, stability, and shelf life. The antibacterial, anti-inflammatory, and antioxidant properties of chitosan, gelatin, alginate, and hyaluronic acid increased after genipin cross-linking. Lastly, drawbacks, toxicity, and directions regarding the genipin cross-linking have also been addressed. The review article covers how to recover and cross-link genipin with biopolymers for industrial applications.

Effect of pectin concentration on emulsifying properties of black soldier fly (Hermetia illucens) larvae albumin modified by pH-shifting and ultrasonication

The effect of pectin concentration on the structural and emulsifying properties of black soldier fly larvae albumin (BSFLA) modified by pH-shifting (pH12) and ultrasound (US) was studied. The results (intrinsic fluorescence, surface hydrophobicity, Fourier transform infrared spectrum, and disulfide bonds) showed that modified BSFLA samples, especially pH12-US, were more likely to bind to pectin through hydrogen bonding, electrostatic interactions, and hydrophobic interactions due to the unfolding of BSFLA, the collapse of disulfide bonds and exposure of hydrophobic groups. Thus, a BSFLA-pectin complex with smaller particle size, more negative charges, and a relatively loose structure was formed. The emulsifying activity (EAI) and stability index (ESI) of pH12-US modified BSFLA were significantly enhanced by the addition of pectin, reaching the highest values (associated with 174.41 % and 643.22 % increase, respectively) at pectin concentration of 1.0 %. Furthermore, the interface modulus of the emulsion prepared by the modified BSFLA was mainly viscous, and had higher apparent viscosity, smaller particle size and droplet size, contributing to higher EAI and ESI. The study findings suggest the addition of pectin to pH12-US treated BSFLA could be used in industry to prepare BSFLA-pectin emulsion with exceptional/desirable properties.

Pulsed electric field enhances glucose glycation and emulsifying properties of bovine serum albumin: Focus on polarization and ionization effects at a high reaction temperature

Previous studies demonstrated that the non-thermal effects of pulsed electric fields can promote protein glycation below 40 °C, but it does not always enhance the emulsifying properties of proteins, such as in the bovine serum albumin/glucose model. Therefore, the aim of this study was to investigate the impact of non-thermal effects on the glucose glycation and emulsification properties of bovine serum albumin at 90 °C. The results of circular dichroism, surface hydrophobicity, and molecular dynamics simulations showed that the polarization effect increased the degree of glycation of bovine serum albumin-glucose conjugates from 12.82 % to 21.10 % by unfolding protein molecule, while the emulsifying stability index was increased from 79.17 to 100.73 compared with the control. Furthermore, the results of principal component analysis and Pearson correlation analysis indicated that the ionization effect and the free radicals generated by pulsed electric fields significantly (p < 0.05) inhibited browning and reduced free sulfhydryl content. This study demonstrated that pulsed electric fields combined with heating can prepare glycated proteins with good emulsifying properties in a short period of time and at temperatures lower than conventional heating while reducing energy consumption. This processing strategy has potential applications in improving the emulsifying performance of highly stable proteins.

Citrus peel pectin and alginate-based emulgel particles for small intestine-targeted oral delivery of curcumin

Polysaccharides are a prominent choice in the realm of food-grade oral delivery systems due to their resistance to degradation by digestive enzymes in the oral, gastric, and small intestinal environments, as well as their ease of production, cost-effectiveness, and potential health benefits as prebiotics. Furthermore, their ability to respond to pH-induced dissolution, along with their emulsifying properties, can be strategically employed to achieve precise targeting of lipophilic bioactives to the small intestine. In this study, citrus peel pectin and alginate served as stabilizers for emulgel particles without supplementary emulsifiers or gelling agents. Within this system, pectin functioned as an emulsifier, while alginate acted as a gelling agent, facilitated by Ca2+-induced ionic crosslinking. The synergistic interplay between pectin and alginate efficiently protected curcumin in gastric conditions and controlled dissolution in the small intestine, depending on the pectin/alginate ratio. These controlled phenomena facilitated lipolysis, curcumin release, and ultimately enhanced curcumin bioaccessibility. Furthermore, once the emulgel particle released all the entrapped curcumin in the small intestine, residual polysaccharides underwent facile degradation by pectinase and alginate lyase, yielding fermentable monosaccharides. This confirms the potential of the emulgel particles for use as a prebiotic in the colon. These findings offer significant promise for enhancing the systematic design of food-grade delivery systems that encapsulate lipophilic bioactives, achieving controlled release, enhanced stability, and improved bioaccessibility. Importantly, this system can comprise components that undergo complete digestion, absorption, and utilization in the human body, encompassing materials such as oil, nutraceuticals, and prebiotics, all without presenting health risks.

Chlorogenic acid-chitosan copolymers: Synthesis, characterization and application in O/W emulsions for enhanced β-carotene stability

In this study, chlorogenic acid-chitosan (CA-CS) copolymers were prepared with varying Chitosan (CS): chlorogenic acid (CA)ratios and characterized for their water solubility, antioxidant capacity, and emulsions stability. Results showed that CA-CS samples exhibited up to 90.5 % increase in DPPH scavenging efficiency and 20 % increase in hydroxyl radical scavenging efficiency compared to CS alone. CA-CS copolymers used to stabilize oil in water (O/W) emulsions, which were evaluated for their potential in encapsulating and protecting β-carotene. Microscopic observations revealed homogeneous spherical droplets in stable emulsions, suggesting effective interfacial structures. The selected CA-CS-stabilized O/W emulsions demonstrated encapsulation efficiencies of 74.8 % and 75.26 % for β-carotene. The CA-CS stabilized O/W emulsions provided the most effective protection against β-carotene degradation under UV exposure, retaining over 80 % of β-carotene content after 12 h of testing. These findings indicate that CA-CS-based O/W emulsions show promise as carriers and protectors for bioactive compounds, due to their improved antioxidant capacity, emulsions stability, and protection against degradation.

Optimization and characterization of pectin extracted from hawthorn by deep eutectic solvent

In this study, hawthorn pectin was extracted from dried hawthorn with deep eutectic solvent(DES) and compared with the traditional extraction methods such as acid extraction (AE) and ultrasonic-assisted extraction (UAE). Under optimal conditions, with a molar ratio of choline chloride to urea at 1:3, a water content of 30 %, a liquid-to-solid ratio of 30:1 (mL/g), an extraction temperature of 80 °C, an extraction time of 60 min, and a pH of 1, the yield of hawthorn pectin was 4.33 % ± 0.02 %. The measured results were consistent with the prediction. In addition, compared with AE and UAE, the experimental results showed that DES had a higher yield, a lower degree of esterification, and a slightly different monosaccharide composition from other extraction methods. The results of infrared spectroscopy and scanning electron microscopy showed that DES had a fine microstructure and coarser surface, and the main chemical structure of DES didn't change. The rheological analysis showed that DES had lower apparent viscosity than AE and UAE. These results represent a green source for pectin extraction with high pectin yield and good performance. In conclusion, the deep eutectic solvent has good application prospects in extracting hawthorn pectin.

Wheat bran arabinoxylan-soybean protein isolate emulsion-filled gels as a β-carotene delivery carrier: Effect of polysaccharide content on textural and rheological properties

This study aimed to investigate the effects of different wheat bran arabinoxylan (WBAX) concentrations (1, 2, 3, and 4 wt%) on the structural and physicochemical properties of WBAX-soybean protein isolate (SPI) emulsion-filled gels (EFGs) prepared using laccase and heat treatment. The properties of the various gels as well as their microstructure, rheology, and in vitro digestion behaviors were investigated. Results showed that WBAX-SPI EFGs with a 3 wt% WBAX concentration had a smooth and uniform appearance, high water holding capacity (98.5 ± 0.2 %), and enhanced mechanical properties. Rheological experiments suggested that a stronger and closer gel network was formed at 3 wt% WBAX concentration. Fourier transform infrared spectroscopy showed that laccase and heat treatment not only catalyzed the intramolecular crosslinking of WBAX and SPI, respectively, but also promoted the interaction between WBAX and SPI. Confocal laser scanning microscopy revealed that the WBAX gel network was interspersed within the SPI network. The interactions contributing to the gelation analysis revealed that chemical (disulfide bond) and physical (hydrogen bond and hydrophobic) interactions promoted the formation of denser EFGs. Furthermore, the WBAX-SPI EFGs provided a β-carotene bioaccessibility of 21.8 ± 0.6 %. Therefore, our study suggests that WBAX-SPI EFGs hold promising potential for industrial applications in the delivery of β-carotene.

Pulse Protein Isolates as Competitive Food Ingredients: Origin, Composition, Functionalities, and the State-of-the-Art Manufacturing

The ever-increasing world population and environmental stress are leading to surging demand for nutrient-rich food products with cleaner labeling and improved sustainability. Plant proteins, accordingly, are gaining enormous popularity compared with counterpart animal proteins in the food industry. While conventional plant protein sources, such as wheat and soy, cause concerns about their allergenicity, peas, beans, chickpeas, lentils, and other pulses are becoming important staples owing to their agronomic and nutritional benefits. However, the utilization of pulse proteins is still limited due to unclear pulse protein characteristics and the challenges of characterizing them from extensively diverse varieties within pulse crops. To address these challenges, the origins and compositions of pulse crops were first introduced, while an overarching description of pulse protein physiochemical properties, e.g., interfacial properties, aggregation behavior, solubility, etc., are presented. For further enhanced functionalities, appropriate modifications (including chemical, physical, and enzymatic treatment) are necessary. Among them, non-covalent complexation and enzymatic strategies are especially preferable during the value-added processing of clean-label pulse proteins for specific focus. This comprehensive review aims to provide an in-depth understanding of the interrelationships between the composition, structure, functional characteristics, and advanced modification strategies of pulse proteins, which is a pillar of high-performance pulse protein in future food manufacturing.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Spontaneous gelation behaviors and mechanism of Ficus awkeotsang Makino pectin

Ficus awkeotsang Makino (jelly fig) can produce edible gels by rubbing its seeds in water at room temperature in which pectin is considered as the main gelling component. However, the spontaneous gelation mechanism of Ficus awkeotsang Makino (jelly fig) pectin (JFSP) is still unclear. This study aimed to reveal the structure, physicochemical properties, and spontaneous gelation behaviors and mechanism of JFSP. JFSP was first obtained by water extraction and alcohol precipitation method, with a pectin yield of 13.25 ± 0.42 % (w/w), weight-average molar mass (Mw) of 111.26 kDa, and methoxylation degree (DM) of 26.8 %. Analysis of monosaccharide compositions showed that JFSP was composed of 87.8 % galactose acid, indicating a high percentage of galacturonic acid blocks. Measurement on the gelling capacity suggested that JFSP gels can be easily formed by simply dispersing the pectin in water at room temperature without adding any co-solutes or metal ions. Gelation force analysis indicated that hydrogen bonding, hydrophobic interactions, and electrostatic interactions were the main factors contributing to gel formation. At 1.0 % (w/v) of pectin concentration, JFSP gels exhibited relatively high gel hardness (72.75 ± 1.15 g) and good thermal and freeze-thawing stability. Overall, these findings highlight the potential application of JFSP as a promising commercial pectin resource.

Natural Aldehyde-Chitosan Schiff Base: Fabrication, pH-Responsive Properties, and Vegetable Preservation

The aim of the present work was to fabricate Schiff base compounds between chitosan and aldehydes and use the resultant aldehyde-chitosan Schiff bases for broccoli preservation. Using an element analyzer, the degree of substitution was calculated as 68.27-94.65%. The aldehyde-chitosan Schiff bases showed acidic sensitivity to rapid hydrolysis for releasing aldehyde at a buffer solution of pH 4-6, in which more than 39% of the aldehydes were released within 10 h. The release of aldehydes endows the aldehyde-chitosan Schiff bases with a better antibacterial activity at pH 5 than at pH 7. In a simulated CO2 (5-15%) atmosphere with high humidity (92%), the hydrolysis of imine bonds (C=N) was triggered and continuously released aldehyde, even without direct contact with the aqueous phase. The application of aldehyde-chitosan Schiff bases significantly extended the shelf life of broccoli from 4 d to 5-7 d and decreased the weight loss of broccoli during storage. In summary, the fabrication of aldehyde-chitosan Schiff bases and the strategy of using pH-response imine bond (C=N) hydrolysis (thus releasing aldehyde to kill microorganisms) were feasible for use in developing EO-incorporated intelligent food packages for vegetable preservation.

Laccase-Induced Gelation of Sugar Beet Pectin-Curcumin Nanocomplexes Enhanced by Genipin Crosslinking

Research on the use of polysaccharides as hydrophobic bioactive carriers instead of proteins is still scarce. Sugar beet pectin (SBP) contains a small amount of protein and is a potential carrier for loading curcumin. In this work, SBP encapsulation, genipin crosslinking, and laccase-induced gelation were used to develop novel jelly food and improve the stability of curcumin without the incorporation of oil. By mixing the SBP solution (40 mg/mL) with curcumin powder (25 mg/mL SBP solution), an SBP-curcumin complex (SBP-Cur) was fabricated with a loading amount of 32 mg/g SBP, and the solubility of curcumin improved 116,000-fold. Fluorescence spectroscopy revealed that hydrophobic interactions drove the complexation of curcumin and SBP. Crosslinked by genipin (10 mM), SBP-Cur showed a dark blue color, and the gel strength of laccase-catalyzed gels was enhanced. Heating and UV radiation tests suggested that the genipin crosslinking and gelation strategies substantially improved the stability of curcumin. Because of the unique UV-blocking capacity of blue pigment, crosslinked samples retained 20% more curcumin than control samples. With the enhanced stability of curcumin, the crosslinked SBP-curcumin complexes could be a functional food ingredient used in functional drinks, baked food, and jelly food.

Effects of ultrasound treatment on the morphological characteristics, structures and emulsifying properties of genipin cross-linked myofibrillar protein

Genipin is a natural crosslinker that improves the functional properties of proteins by modifying its structures. This study aimed to investigate the effects of sonication on the emulsifying properties of different genipin concentration-induced myofibrillar protein (MP) cross-linking. The structural characteristics, solubility, emulsifying properties, and rheological properties of genipin-induced MP crosslinking without sonication (Native), sonication before crosslinking (UMP), and sonication after crosslinking (MPU) treatments were determined, and the interaction between genipin and MP were estimated by molecular docking. The results demonstrated that hydrogen bond might be the main forces for genipin binding to the MP, and 0.5 μM/mg genipin was a desirable concentration for protein cross-linking to improve MP emulsion stability. Ultrasound treatment before and after crosslinking were better than Native treatment to improve the emulsifying stability index (ESI) of MP. Among the three treatment groups at the 0.5 μM/mg genipin treatment, the MPU treatment group showed the smallest size, most uniform protein particle distribution, and the highest ESI (59.89%). Additionally, the highest α-helix (41.96%) in the MPU + G5 group may be conducive to the formation of a stable and multilayer oil-water interface. Furthermore, the free groups, solubility, and protein exposure extent of the MPU groups were higher than those of UMP and Native groups. Therefore, this work suggests that the treatment of cross-linking followed by ultrasound (MPU) could be a desirable approach for improving the emulsifying stability of MP.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Pickering emulsions synergistically stabilized by sugar beet pectin and montmorillonite exhibit enhanced storage stability and viscoelasticity

Sugar beet pectin (SBP) is a naturally occurring emulsifying type of pectin fabricated into nanocomposites with montmorillonite (MMT) and then introduced as a stabilizer for high internal phase emulsions (HIPEs). SBP-MMT composites performed well in emulsifying medium-chain triglyceride with an oil volume fraction (φ) of 0.1-0.85 and SBP/MMT mass ratios of 1:0.1-1:0.75. The two representative high internal phase emulsions stabilized by SBP-MMT composites at different SBP/MMT mass ratios exhibited good stability against creaming and coalescence. In these emulsion systems, SBP and MMT formed a network in the continuous phase that markedly improved the rheological properties, including the storage modulus (by 3 orders of magnitude). Confocal light scattering microscopy analysis indicated that a fraction of MMT could work synergistically with SBP in adsorbing on oil droplet surfaces, enhancing stability. SBP-MMT composites stabilized high internal phase emulsions destabilized after the freeze-thaw treatment (-40 °C for 20 h and 25 °C for 4 h) but could be facilely re-emulsified via high-speed shearing. The gastrointestinal digestion behaviors were also modified by stabilizing SBP and MMT. Overall, this work reveals a hitherto undocumented strategy for fabricating highly stable emulsions based on SBP-MMT composites which have huge prospects for application in the food and related industries.

Supramolecular structure of banana peel pectin and its transformations during extraction by acidic methods

In this study, the approaches to describe the mesh structure in the homogalacturonate domains of pectin and the effect of the native structure violations on the stabilization effectiveness of the oil-in-water emulsion were demonstrated. Pectin with a native structure was isolated from banana peel by enzymolysis of insoluble dietary fibres. This pectin was compared with pectins, which were isolated using hydrochloric and citric acids. The properties of pectins were analyzed taking into account the ratio of galacturonate units in nonsubstituted, methoxylated and calcium-pectate forms. The content of calcium-pectate units determines the density of inter-molecular crosslinking formation. The simulation results reflect the structure of rigid "egg-box" crosslinking blocks and flexible segments formed in native pectin mainly by methoxylated links. Hydrochloric acid extraction is accompanied by the destruction of the crosslinking blocks and depolymerization of pectin. Citric acid partially demineralizes the crosslinking blocks contributing to the release of macromolecular chains that do not have calcium-pectate units. The granulometric data indicates that the individual macromolecules take the thermodynamically stable form of a statistical tangle. Such conformation is an ideal basis for the formation of "host-guest" microcontainers having a hydrophilic shell and a hydrophobic core with an oil-soluble functional substance.

Thermomechanically micronized sugar beet pulp: Emulsification performance and the contribution of soluble elements and insoluble fibrous particles

In this work, thermomechanically micronized sugar beet pulp (MSBP), a micron-scaled plant-based byproduct comprised of soluble elements (∼40 wt%) and insoluble fibrous particles (IFPs, ∼60 wt%), was used as a sole stabilizer for oil-in-water emulsion fabrication. The influence of emulsification parameters on the emulsifying properties of MSBP was investigated, including emulsification techniques, MSBP concentration, and oil weight fraction. High-speed shearing (M1), ultrasonication (M2), and microfludization (M3) were used to fabricate oil-in-water emulsions (20% oil) with 0.60 wt% MSBP as stabilizer, in which the d_4,3 value was 68.3, 31.5, and 18.2 μm, respectively. Emulsions fabricated by M2 and M3 (higher energy input) were more stable than M1 (lower energy input) during long-term storage (30 days) as no significant increase of d_4,3. As compared to M1, the adsorption ratio of IFPs and protein was increased from ∼0.46 and ∼0.34 to ∼0.88 and ∼0.55 by M3. Fabricated by M3, the creaming behavior of emulsions was completely inhibited with 1.00 wt% MSBP (20% oil) and 40% oil (0.60 wt% MSBP), showing a flocculated state and could be disturbed by sodium dodecyl sulfate. The gel-like network formed by IFPs could be strengthened after storage as both viscosity and module were significantly increased. During emulsification, the co-stabilization effect of the soluble elements and IFPs enabled a compact and hybrid coverage onto the droplet surface, which acted as a physical barrier to endow the emulsion with robust steric repulsion. Altogether, these findings suggested the feasibility of using plant-based byproducts as oil-in-water emulsion stabilizers.

RG-I Domain Matters to the In Vitro Fermentation Characteristics of Pectic Polysaccharides Recycled from Citrus Canning Processing Water

Canned citrus is a major citrus product that is popular around the world. However, the canning process discharges large amounts of high-chemical oxygen demand wastewater, which contains many functional polysaccharides. Herein, we recovered three different pectic polysaccharides from citrus canning processing water and evaluated their prebiotic potential as well as the relationship between the RG-I domain and fermentation characteristics using an in vitro human fecal batch fermentation model. Structural analysis showed a large difference among the three pectic polysaccharides in the proportion of the rhamnogalacturonan-I (RG-I) domain. Additionally, the fermentation results showed that the RG-I domain was significantly related to pectic polysaccharides' fermentation characteristics, especially in terms of short-chain fatty acid generation and modulation of gut microbiota. The pectins with a high proportion of the RG-I domain performed better in acetate, propionate, and butyrate production. It was also found that Bacteroides, Phascolarctobacterium, and Bifidobacterium are the main bacteria participating in their degradation. Furthermore, the relative abundance of Eubacterium_eligens_group and Monoglobus was positively correlated with the proportion of the RG-I domain. This study emphasizes the beneficial effects of pectic polysaccharides recovered from citrus processing and the roles of the RG-I domain in their fermentation characteristics. This study also provides a strategy for food factories to realize green production and value addition.

The microstructure and thermal properties of pulsed electric field pretreated oxidized starch

The structure and thermal properties of pulsed electric field (PEF) assisted sodium hypochlorite oxidized starch were investigated. The carboxyl content of the oxidized starch was increased by 25 % when compared with the traditional oxidation method. Dents and cracks were evident on the surface of the PEF-pretreated starch. Compared with native starch, the peak gelatinization temperature (T_p) of PEF-assisted oxidized starch (POS) was reduced by 10.3 °C, while that of the oxidized starch without PEF treatment (NOS) was only reduced by 7.4 °C. In addition, PEF treatment further reduces the viscosity and improve the thermal stability of the starch slurry. Therefore, PEF treatment combined with hypochlorite oxidation is an effective method to prepare oxidized starch. PEF showed great potential in expanding starch modification, to promote a wider application of oxidized starch in the paper, the textile and the food industry.

Influence of Arabinan Fine Structure, Galacturonan Backbone Length, and Degree of Esterification on the Emulsifying Properties of Acid-Extracted Sugar Beet Pectins

Sugar beet pectins (SBPs) are known for their emulsifying properties, but it is yet unknown which structural elements are most important for functionality. Recent results indicated that the arabinose content has a decisive influence, but the approach applied did not allow causality to be established. In this study, a mostly intact SBP was selectively modified and the obtained pectins were analyzed for their molecular structure and their emulsifying properties. De-esterification only resulted in a moderate increase in droplet size. The length of the pectin backbone only influenced the emulsifying properties when the homogalacturonan backbone was cleaved to a higher extent. By using different arabinan-modifying enzymes, it was demonstrated that both higher portions and chain lengths of arabinans positively influence the emulsifying properties of SBPs. Therefore, we were able to refine the structure-function relationships for acid-extracted SBPs, which can be used to optimize extraction conditions.

Valorizing protein-polysaccharide conjugates from sugar beet pulp as an emulsifier

Inspired by the emulsion stability of sugar beet pulp pectin, the hydrophobic protein fraction in sugar beet pulp (SBP) is expected to feature high interfacial activity. This work retrieved alkaline extracted protein-polysaccharide conjugates (AEC) from partially depectinized SBP by hot alkaline extraction. AEC was protein-rich (57.20 %), and the polysaccharide mainly comprised neutral sugar, which adopted a rhamnogalacturonan-I pectin-like structure. The hydrophobic polypeptide chains tangled as a dense 'core' with polysaccharide chains attached as a hydrated 'shell' (hydrodynamic radius of ~110 nm). AEC could significantly decrease the oil-water interfacial tension (11.58 mN/m), featuring superior emulsification performance than three control emulsifiers, especially the excellent emulsifying stability (10 % oil) as the emulsion droplet size of 0.438 and 0.479 μm for fresh and stored (60 °C, 5 d) emulsions, respectively. The relationship of molecular structure to emulsification was investigated by specific enzymic modification, suggesting the intact macromolecular structure was closely related to emulsifying activity and that the NS fraction contributed greatly to emulsifying stability. Moreover, AEC was highly efficient to stabilize gel-like high internal phase emulsions (oil fraction 0.80) with low concentration (0.2 %) and even high ionic strength (0-1000 mM). Altogether, valorizing AEC as an emulsifier is feasible for high-value utilization of SBP.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Meireles M, Ibáñez E. Synergic effect of natural deep eutectic solvent and high-intensity ultrasound on obtaining a ready-to-use genipin extract: Crosslinking and anti-neurodegenerative properties

In this paper, genipin, an important natural crosslinker and anti-neurodegenerative compound, was extracted from unripe Genipa americana L., combining high-intensity ultrasound (HIUS) and natural deep eutectic solvents (NADESs). The extraction process conditions were evaluated step-by-step to reach the best genipin recovery. The obtained ready-to-use genipin-NADES extract was examined regarding its crosslinking properties and anti-neurodegenerative capacity. For the condictions tested, the highest genipin recovery was obtained using 40 % water and 60 % betaine:lactic acid NADES in molar ratio 1:3 (n/n) as the solvent, a solvent:feed ratio of 19 (w/w), and HIUS acoustic power of 14 ± 1 W. The HIUS-assisted extraction using NADES as solvent showed to be a promising and efficient green extraction technique to obtain genipin. The ready-to-use genipin-NADES extract presented crosslinking capacity and anticholinergic activity. These results indicate that genipin-NADES extract can be directly applied in hydrogels for drug delivery, films, tissue engineering, and others. Moreover, it can be used in food, supplements, and medicine to enhance their neuroprotective effect.

Encapsulation Efficiency and Functional Stability of Cinnamon Essential Oil in Modified β-cyclodextrins: In Vitro and In Silico Evidence

Essential oils (EOs) have good natural antioxidant and antimicrobial properties; however, their volatility, intense aroma, poor aqueous solubility, and chemical instability limit their applications in the food industry. The encapsulation of EOs in β-cyclodextrins (β-CDs) is a widely accepted strategy for enhancing EO applications. The complexation of cinnamon essential oil (CEO) with five types of β-CDs, containing different substituent groups (β-CD with primary hydroxyl, Mal-β-CD with maltosyl, CM-β-CD with carboxymethyl, HP-β-CD with hydroxypropyl, and DM-β-CD with methyl), inclusion process behaviors, volatile components, and antioxidant and antibacterial activities of the solid complexes were studied. The CEOs complexed with Mal-β-CD, CM-β-CD, and β-CD were less soluble than those complexed with DM-β-CD and HP-β-CD. Molecular docking confirmed the insertion of the cinnamaldehyde benzene ring into various β-CD cavities via hydrophobic interactions and hydrogen bonds. GC-MS analysis revealed that HP-β-CD had the greatest adaptability to cinnamaldehyde. The CEO encapsulated in β-, Mal-β-, and CM-β-CD showed lower solubility but better control-release characteristics than those encapsulated in DM- and HP-β-CD, thereby increasing their antioxidant and antibacterial activities. This study demonstrated that β-, Mal-β-, and CM-β-CD were suitable alternatives for the encapsulation of CEO to preserve its antioxidant and antibacterial activities for long-time use.

The antihyperglycemic effect of pulsed electric field-extracted polysaccharide of Kaempferia elegans officinale on streptozotocin induced diabetic mice

Kaempferia elegans polysaccharide (KEP) was extracted using a high-voltage pulsed electric field-assisted hot water method. Its physicochemical properties, in vitro activity and hypoglycemic effect was investigated. Experiments were undertaken with diabetic mice models and the potential mechanism of KEP to improve blood glucose levels was unveiled through measurements of relevant indicators in the serum and liver of the mice. Results showed that KEP is mainly composed of glucose, rhamnose, arabinose, and galactose. It has certain DPPH and ABTS free radical scavenging ability and good α-glucosidase inhibitory ability, indicating that KEP has the potential to improve blood glucose levels in diabetes patients. The experimental results of KEP treatment on mice showed that KEP could control the continuous increase of fasting blood glucose levels. The potential mechanisms behind this blood glucose level control composes of (1) increasing the glucokinase and C peptide levels and decreasing Glucose-6-phosphatase content for improving key enzyme activity in the glucose metabolism pathway. This promotes the consumption of blood glucose during glycolysis, thereby inhibiting the production of endogenous glucose in gluconeogenesis pathway; (2) reducing triglyceride, total cholesterol, low density lipoprotein cholesterol, and increasing high density lipoprotein cholesterol content, for regulating blood lipid indicators to normal levels; and (3) by improving the activities of catalase, glutathione peroxidase, and antioxidant enzymes superoxide dismutase for further improving the antioxidant defense system in the body to reduce blood glucose.

Succinylated whey protein isolate-chitosan core-shell composite particles as a novel carrier: Self-assembly mechanism and stability studies

Single protein [whey protein isolate (WPI) or succinylated whey protein isolate (SWPI)] and composite particles of proteins with chitosan (CS) were tested for their ability to encapsulate and protect curcumin (CUR). Combining protein and CS resulted in changes in zeta-potential and surface hydrophobicity, particularly in the SWPI-H (high degree of succinylation, 90 %) and CS composite particle (H-CS). Furthermore, the secondary and tertiary structures were dramatically altered using Fourier transform infrared (FTIR), circular dichroism (CD), and X-ray diffraction (XRD). Scanning electron microscopy (SEM) and atomic force microscope (AFM) analyses revealed that H-CS exhibited a soft core-rigid shell morphology due to electrostatic interactions, hydrophobic interactions, and H-bond interactions. Fluorescence quenching results demonstrated that H-CS had a higher binding constant (K, 1.69 ×104 M-1) and encapsulation effectiveness (EE, 88.3 %) of CUR. Because of increased binding sites and steric hindrance, CUR was stabilized more effectively in H-CS in photostability and thermostability tests,. These results show that SWPI-CS composite particles can be utilized to build a protection system for water-insoluble nutritional supplements.

Influence of glycosyl composition on the immunological activity of pectin and pectin-derived oligosaccharide

Factors causing differences in immune activities between pectin and pectin-derived oligosaccharides have not been fully studied. In this article, four samples with different molecular weights and monosaccharide compositions, including polygalacturonic acid (poly-GA) and its oligosaccharide (oligo-GA), navel orange peel pectin (NP) and its oligosaccharide (oligo-NP), were used to compare their immunomodulatory properties on RAW264.7 cells. All samples had nontoxic effect on cells, oligo-GA and oligo-NP could increase the production of nitric oxide and cytokines to a much higher level than poly-GA and NP. The findings revealed that reducing the molecular weight and preserving the branched regions of pectin-derived samples could improve their immune-enhancing effects on macrophages. Interestingly, the addition of TAK-242 (TLR4 inhibitor) also demonstrated that the tested pectin oligosaccharides could stimulate the activation of macrophages through TLR4 signaling pathway. These results confirmed the potential value of pectin oligosaccharides, and provided theoretical support for their application in the pharmaceutical industry.

Utilisation of Pectins Extracted from Orange Peels by Non Conventional Methods in the Formation of Edible Films in the Presence of Herbal Infusions

Edible films of three high methoxy pectins (DE: 70–75%) in the presence of dittany and anise infusions were studied. Apart from a commercial one, two more pectins, selected by their yield and DE from preliminary experiments on pectin extraction from orange peels using ultrasound- and microwave-assisted extraction or a combination of both, were used. Extracted pectins were darker, less surface active and had lower [η] and absolute zeta values. All three pectin solutions were Newtonian. Furthermore, all films had statistically the same thickness (~40 μm) and moisture content (~25.2%). For the same herbal infusion, all pectins resulted in films with the same density (~1.01 and ~1.19 g/cm3 for dittany and anise films, respectively). Values of 2–4.65 N and 76.62–191.80 kPa, for maximum force and modulus, respectively, were reported. The commercial pectin film with anise was the stronger, whereas that with dittany, the stiffer. Total phenolics content (TPC) and antioxidant activity (SA) were also measured for films and film-forming solutions (FFS). TPC values ranged from 0.035 to 0.157 mg GAE/0.5 mL and SA from ~62 to 91%. Films had greater TPC but lower SA than their FFS. The presence of both pectin and herbal infusions were significant for our observations.

A review of sugar beet pectin-stabilized emulsion: extraction, structure, interfacial self-assembly and emulsion stability

In recent years, sugar beet pectin as a natural emulsifier has shown great potential in food and pharmaceutical fields. However, the emulsification performance depends on the molecular structure of sugar beet pectin, and the molecular structure is closely related to the extraction method. This review summarizes the extraction methods of pectin, structure characterization methods and the current research status of sugar beet pectin-stabilized emulsions. The structural characteristics of sugar beet pectin (such as degree of methylation, degree of acetylation, degree of blockiness, molecular weight, ferulic acid content, protein content, neutral sugar side chains, etc.) are of great significance to the emulsifying activity and stability of sugar beet pectin. Compared with traditional hot acid extraction method, ultrasonic-assisted extraction, microwave-assisted extraction, subcritical water-assisted extraction, induced electric field-assisted extraction and enzyme-assisted extraction can improve the yield of sugar beet pectin. At the same time, compared with harsh extraction conditions (too high temperature, too strong acidity, too long extraction time, etc.), mild extraction conditions can better preserve these emulsifying groups in sugar beet pectin molecules, which are beneficial to improve the emulsifying properties of sugar beet pectin. In addition, the interfacial self-assembly behavior of sugar beet pectin induced by the molecular structure is crucial to the long-term stability of the emulsion. This review provides a direction for extracting or modifying sugar beet pectin with specific structure and function, which is instructive for finding alternatives to gum arabic.