The radiation assisted-Maillard reaction comprehensively improves the freeze-thaw stability of soy protein-stabilized oil-in-water emulsions

Development of smart films based on soy protein and cow horn dissolved in a deep eutectic solvent: Physicochemical and environmental assessment

With the urge to reduce the use of petroleum-based materials, the aim of this work is to valorize biowaste to develop smart films through a sustainable fabrication way. In this regard, choline chloride/urea (1:2) deep eutectic solvent (DES) at different concentrations (25, 40, 50 and 75 wt%) was used to dissolve cow horn, used as reinforcement agent in soy protein films. The film fabrication was carried out by compression molding, a fast and cost-effective. As proved by SEM/EDX, cow horn was well-dispersed in the films, suggesting a homogeneous distribution of the sulfur from the cysteine present in keratin, the main component of cow horn. FTIR spectroscopy suggested interactions between the components of the formulation, which reduce the water uptake from 180 % to 140 %. Additionally, the films could be heat-sealed. With the aim of developing smart films, blueberry extract was incorporated into the formulation. This extract provided the films with pH sensitivity, which was followed by the film color change in presence of ammonia vapor. In particular, it is worth noting the ability of those films prepared with 40 wt% Horn/DES and 15 wt% blueberry extract to detect food spoilage. Finally, the environmental assessment of the films showed a minimal environmental impact of the procedure, with DES preparation and soybean production as the main relative contributors of the environmental load.

Strong self-association of chitosan microgels at interface mediated high stabilities in Pickering emulsion

The spontaneous self-organization of naturally-occurring polysaccharide particles into a thick and robust gel network at interface in Pickering emulsion is challenging. Inspired by the phenomenon that chitosan microgels (CSMs) with a certain size could self-associate into a solidified gel phase upon freezing, here we tentatively used CSMs to construct a highly-stable Pickering emulsion. CSMs can form a stable Langmuir's layer at the water/oil interface through the network deformation and re-arrangement of dangling chains, while the subsequent negative polymer coating can avoid the bridging resulting from the cross-association for CSMs on different emulsion droplets upon freezing. The experimental results indicated that the emulsion showed excellent features, including the wide pH range stability (3-12), long-term storage stability (> 3 months), thermal stability (121 °C, 30 min). Moreover, CSMs could self-associate into a reliable gel layer around the oil droplet in freezing, leading to the better freeze-thaw stability (1-3 cycles). The negative coating not only facilitates the formation of interfacial gel network around each emulsion droplet, but also produces huge steric hindrance and electrostatic repulsion to suppress the coalescence. This work provides a different way to modulate the interfacial structure, thus developing a more stable polysaccharide-based Pickering emulsion.

Conformational changes induced by cellulose nanocrystals in collaboration with calcium ion improve solubility of pea protein isolate

The low solubility of pea protein isolate (PPI) greatly limits its functional properties and its wide application in food field. Thus, this study investigated the effects and mechanisms of cellulose nanocrystals (CNC) (0.1-0.4 %) and CaCl2 (0.4-1.6 mM) on the solubility of PPI. The results showed that the synergistic effect of CNC (0.3 %) and Ca2+ (1.2 mM) increased the solubility of PPI by 242.31 %. CNC and Ca2+ changed the molecular conformation of PPI, enhanced intermolecular forces, and thus induced changes in the molecular morphology of PPI. Meanwhile, the turbidity of PPI decreased, while surface hydrophobicity, the absolute zeta potential value, viscoelasticity, β-sheet ratio, and thermal properties increased. CNC bound to PPI molecules through van der Waals force and hydrogen bond. Ca2+ could strengthen the crosslinking between CNC and PPI. In summary, it is proposed a valuable combination method to improve the solubility of PPI, and it is believed that this research is of great significance for expanding the application fields of PPI and modifying plant proteins.

High freeze-thaw stability of Pickering emulsion stabilized by SPI-maltose particles and its effect on frozen dough

Pickering emulsions with good freeze-thaw stability are essential in frozen food applications. This study developed a high freeze-thaw stabilized soy protein isolate (SPI)-maltose (M) Pickering emulsion and applied it to frozen doughs to investigate and reveal its impacts on the processing properties of the frozen dough. The results showed that after the freeze-thaw cycle, with a volume ratio of 1:2 of SPI to M, the appropriate amount of M changed the structure of SPI. This resulted in the Pickering emulsion prepared by the SPI exhibiting the least droplet coalescence and the best freeze-thaw stability. The results of dough rheological properties, textural properties, and binding capacity with water demonstrated that Pickering emulsions effectively inhibited the loss of gluten protein network structure in the dough after freeze treatment and increased the binding capacity of gluten proteins with starch and water in the dough. The best results were obtained with the incorporation of 3 % SPI-M high freeze-thaw stability, where the amount of bound water following three freeze-thaw cycles was 4.27 times higher than in doughs without Pickering emulsion. Overall, this study is significant for enhancing the freeze-thaw stability of Pickering emulsions stabilized by proteins and providing a new application route for Pickering emulsions.

Effect of glycosylation modification on structure and properties of soy protein isolate: A review

Soybean protein isolate (SPI) is a highly functional protein source used in various food applications, such as emulsion, gelatin, and food packaging. However, its commercial application may be limited due to its poor mechanical properties, barrier properties, and high water sensitivity. Studies have shown that modifying SPI through glycosylation can enhance its functional properties and biological activities, resulting in better application performance. This paper reviews the recent studies on glycosylation modification of SPI, including its quantification method, structural improvements, and enhancement of its functional properties, such as solubility, gelation, emulsifying, and foaming. The review also discusses how glycosylation affects the bioactivity of SPI, such as its antioxidant and antibacterial activity. This review aims to provide a reference for further research on glycosylation modification and lay a foundation for applying SPI in various fields.

Reduction in the antigenicity of beta-lactoglobulin in whole milk powder via supercritical CO2 treatment

Cow milk allergy is a common phenomenon experienced in early childhood (<5 yr of age) with an average occurrence rate of roughly 2.5%. The most prevalent allergen in cow milk is believed to be β-LG. The objective of this study was to evaluate the use of hydrophobic supercritical CO2 (ScCO2) to modify the chemical structure β-LG, thus impairing its recognition by antibodies. Whole milk powder (WMP) was selected because of its closest compositional resemblance to bovine fluid milk and its applications in reconstitution and in the beverage (infant, toddler, and adult), confectionary, bakery, and meat industries. For this study, WMP was treated with food-grade CO2 at temperatures of 50, 63, and 75°C under operating pressures of 100, 150, 200, 250, and 300 bar. Proteins in WMP were examined using SDS-PAGE, western blot, and ELISA. Orbitrap Fusion liquid chromatography-tandem MS (LC-MS/MS) and periodic staining was performed to confirm post-translational modifications in β-LG. Functional properties of WMP before and after treatment were assessed by its solubility index, oil holding capacity, emulsion capacity and stability, zeta potential, particle size, and color analysis. SDS-PAGE of treated samples yielded fuzzy bands (variable mobility of molecules due to different molecular weights results in ill-defined bands) indicative of an increase in molecular weight, presumably due to chemical change in the protein, and demonstrated a maximum of 71.13 ± 0.29% decrease in the band intensity of β-LG under treatment conditions of 75°C/300 bar for 30 min. These changes were small with samples treated with heat only. Lighter, diffused bands were observed using western blot analysis. The ELISA tests proved that ScCO2 treatment specifically and significantly affected the antigenicity of β-LG with a reduction of 42.9 ± 2.83% and 54.75 ± 2.43% at 63°C/200 bar and 75°C/300 bar, respectively. Orbitrap fusion detected the presence of fatty acids and sugar moieties bound to β-LG and the latter was confirmed by periodic staining. Functional properties of ScCO2-treated milk powder yielded a decrease in solubility index and an increase in emulsion capacity of WMP was observed under ScCO2 treatment at 75°C/300 bar, with small and insignificant changes at other treatments producing a decrease in antigenicity. Color changes were small for most samples, except at 63°C/200 bar, where a significant increase in yellowness was observed. Zeta potential and particle size measurements indicated that most changes were temperature driven. This study demonstrates 2 approaches to mitigate β-LG antigenicity via fatty acid binding and lactosylation using hydrophobic ScCO2.

Effect of heat treatment on the release of off-flavor compounds in soy protein isolate

The effects of different heat treatment conditions (65℃ for 30 min, 75℃ for 15 min, and 95℃ for 2, 15 and 30 min) on the evolution of off-flavor compounds in soy protein isolate (SPI) were investigated in terms of lipid oxidation, Maillard reaction and protein structural characteristics. Higher off-flavor concentrations were observed in control and 65℃ treated SPI due to lipoxygenase-mediated enzymatic lipid oxidation. Protein structure played an important role in the release of off-flavors above 65℃. When heated from 75℃ to 95℃ for 2 min, Maillard reaction occurred, glycinin was completely denatured, the particle size increased and the small molecular weight soluble aggregates were formed, resulting in an increase in the content of partial off-flavors. The off-flavor content decreased with time at 95℃, accompanied by the formation of larger molecular weight soluble aggregates. This finding provides practical implications for the beany removal through the SPI structural regulation.

Research progress on plant-based protein Pickering particles: Stabilization mechanisms, preparation methods, and application prospects in the food industry

At present, there have been many research articles reporting that plant-based protein Pickering particles from different sources are used to stabilize Pickering emulsions, but the reports of corresponding review articles are still far from sufficient. This study focuses on the research hotspots and related progress on plant-based protein Pickering particles in the past five years. First, the article describes the mechanism by which Pickering emulsions are stabilized by different types of plant-based protein Pickering particles. Then, the extraction, preparation, and modification methods of various plant-based protein Pickering particles are highlighted to provide a reference for the development of greener and more efficient plant-based protein Pickering particles. The article also introduces some of the most promising applications of Pickering emulsions stabilized by plant-based protein Pickering particles in the food field. Finally, the paper also discusses the potential applications and challenges of plant-based protein Pickering particles in the food industry.

Investigating Texture and Freeze-Thaw Stability of Cold-Set Gel Prepared by Soy Protein Isolate and Carrageenan Compounding

In this study, the purpose was to investigate the effects with different concentrations of carrageenan (CG, 0-0.30%) on the gel properties and freeze-thaw stability of soy protein isolate (SPI, 8%) cold-set gels. LF-NMR, MRI, and rheology revealed that CG promoted the formation of SPI-CG cold-set gel dense three-dimensional network structures and increased gel network cross-linking sites. As visually demonstrated by microstructure observations, CG contributed to the formation of stable SPI-CG cold-set gels with uniform and compact network structures. The dense gel network formation was caused when the proportion of disulfide bonds in the intermolecular interaction of SPI-CG cold-set gels increased, and the particle size and zeta potential of SPI-CG aggregates increased. SG20 (0.20% CG) had the densest gel network in all samples. It effectively hindered the migration and flow of water, which decreased the damage of freezing to the gel network. Therefore, SG20 exhibited excellent gel strength, water holding capacity, freeze-thaw stability, and steaming stability. This was beneficial for the gel having a good quality after freeze-thaw, which provided a valuable reference for the development of freeze-thaw-resistant SPI cold-set gel products.

Effects of nitrogen fertilizer on the physicochemical, structural, functional, thermal, and rheological properties of mung bean (Vigna radiata) protein

Nitrogen fertilizer can affect the seed quality of mung bean. However, the effects of nitrogen fertilizer on the properties of mung bean protein (MBP) remain unclear. We investigated the effects of four nitrogen fertilization levels on the physicochemical, structural, functional, thermal, and rheological properties of MBP. The results showed that the amino acid and protein contents of mung bean flour were maximized under 90 kg ha-1 of applied nitrogen treatment. Nitrogen fertilization can alter the secondary and tertiary structure of MBP. The main manifestations are an increase in the proportion of β-sheet, the exposure of more chromophores and hydrophobic groups, and the formation of loose porous aggregates. These changes improved the solubility, oil absorption capacity, emulsion activity, and foaming stability of MBP. Meanwhile, Thermodynamic and rheological analyses showed that the thermal stability, apparent viscosity, and gel elasticity of MBP were all increased under nitrogen fertilizer treatment. Correlation analysis showed that protein properties are closely related to changes in structure. In conclusion, nitrogen fertilization can improve the protein properties of MBP by modulating the structure of protein molecules. This study provides a theoretical basis for the optimization of mung bean cultivation and the further development of high-quality mung bean protein foods.

Synergistic effect of residual sugar on freeze-thaw stability of high internal phase emulsions using glycosylated cod protein as interface stabilizer

Nowadays, glycosylated protein seems to be one of the most effective stabilizers for preparing freeze-thaw stabile emulsion; nevertheless, few papers mentioned the relationship between the residual free sugars after the glycosylation reaction and the freeze-thaw stability of high internal phase emulsions (HIPEs). Herein, glucose was used to prepare glycosylated cod proteins (GCPs). The synergistic effect was related to the grafting degree of GCP, and the amount of glucose added to prepare freeze-thaw stable HIPEs was reduced from 20% to 4% when the grafting degree of GCP increased from 0% to 31.58% (i.e. 12% GCP). This might be due to fewer ice crystals forming in water phase or less destruction of emulsion droplets by ice crystals. The obtained results in this study will allow developing freeze-thaw stable HIPEs or new frozen ingredients.

The Effect of Ionic Strength on the Formation and Stability of Ovalbumin-Xanthan Gum Complex Emulsions

Protein-polysaccharide complexes have been widely used to stabilize emulsions, but the effect of NaCl on ovalbumin-xanthan gum (OVA-XG) complex emulsions is unclear. Therefore, OVA-XG complex emulsions with different XG concentrations at pH 5.5 were prepared, and the effects of NaCl on them were explored. The results indicated that the NaCl significantly affected the interaction force between OVA-XG complexes. The NaCl improved the adsorption of proteins at the oil-water interface and significantly enhanced emulsion stability, and the droplet size and zeta potential of the emulsion gradually decreased with increasing NaCl concentrations (0-0.08 M). In particular, 0.08 M NaCl was added to the OVA-0.2% XG emulsion, which had a minimum droplet size of 18.3 μm. Additionally, XG as a stabilizer could improve the stability of the emulsions, and the OVA-0.3% XG emulsion also exhibited good stability, even without NaCl. This study further revealed the effects of NaCl on emulsions, which has positive implications for the application of egg white proteins in food processing.

Stabilization of oil-in-water high internal phase emulsions with octenyl succinic acid starch and beeswax oleogel

High internal phase emulsions (HIPEs) based on beeswax (BW) oleogels and octenyl succinic acid starch (OSA starch) were prepared by a facile one-step method. Effects of the oleogelation of internal phase on the formation, stability and functionality of the HIPEs were investigated. OSA starch absorbed at the interface allowed high surface charge (|ζ| > 25 mV) of the droplets, and small droplet size (d ≈ 5 m). Microstructural observation suggested that the HIPEs were of O/W type with droplets packed tightly. With the increase in BW content (0-4 %), the particle size (4-7 μm) and ζ-potential (-25 ~ -30 mV) of the HIPEs were first decreased and then increased. Stability analysis revealed that the addition of BW effectively improved emulsion stability against centrifugation, freeze-thawing, changes in pH and ionic strength, and the HIPE with 2 % BW presented the best stability. Rheological tests indicated that the HIPEs with higher content of BW exhibited higher storage modulus, solid-like properties, and shear thinning behaviors. Creep-recovery results implied that the oleogelation enhanced the structure of HIPEs and improved the deformation resistance of the systems. When subjected to light and heat, oleogel-in-water HIPEs showed advantages in protecting β-carotene from degradation, and β-carotene in the HIPEs with 2 % BW had the lowest degradation rate. These findings suggested that gelation of oil phase could improve the stability of HIPEs and the encapsulation capability, which would be meaningful for the development of novel healthy food.

Relationship between Soybean Protein Isolate and Textural Properties of Texturized Vegetable Protein

To identify the ideal soybean protein isolate for texturized vegetable protein processing, the effect of different soybean protein isolates on texturized vegetable protein composition was studied. Three different types of soybean protein isolates were selected and analyzed for functional properties (water holding capacity (WHC), emulsifying properties, foaming properties), amino acid content, and protein secondary structure. Then, using the same formulation, the soybean protein isolates were extruded to produce texturized vegetable protein, and its textural properties, degree of texturization, microstructure, free sulfhydryl (free SH), and disulfide (S-S) content were determined. Lastly, a correlation analysis was performed to examine the connection between soybean protein isolates and texturized vegetable proteins. After correlation analysis, the soybean protein isolate functional properties that affect the textural properties of the texturized vegetable protein were as follows: the emulsifying property affected the hardness, adhesiveness, springiness, gumminess, and chewiness of the texturized vegetable proteins; and the foaming property affected the gumminess, chewiness, and the degree of texturization of the texturized vegetable proteins. In addition, 16 amino acids including threonine (Thr), methionine (Met), and arginine (Arg) affect texturized vegetable proteins, mainly with respect to adhesiveness, springiness, and free SH. The effects of secondary structure (α-helix, random coil) on texturized vegetable proteins were degree of texturization, resilience, and cohesion, respectively. Therefore, choosing the soybean protein isolate with better emulsifying and foaming properties provides a more suitable approach for processing texturized vegetable protein.

The freeze-thaw stability of flavor high internal phase emulsion and its application to flavor preservation and 3D printing

Volatilization of flavor substances may reduce consumers' perception of flavor, and the research on preservation of flavor substances by high internal phase emulsions (HIPEs) under freeze-thaw conditions is still blank. Herein, flavor HIPEs prepared by adding more than 15% litsea cubeba oil in the oil phase could be used as food-grade 3D printing inks, and showed better stability after 5 freeze-thaw cycles, which could be interpreted as the reduced ice crystal formation, more stable interface layer, and more flexible gel-like network structure resulting from the protein binding to flavor substances. The constructed HIPEs system in this study could preserve the encapsulated flavor substances perfectly after 5 freeze-thaw cycles. Overall, this study contributes a food-grade 3D printing ink, and provides a new method for the preservation of flavor substances under freezing conditions and expands the application range of flavor HIPEs in food industry.

Dynamic microfluidic-assisted transglutaminase modification of soy protein isolate-chitosan: Effects on structural and functional properties of the adduct and its antioxidant activity after in vitro digestion

In this study, soy protein isolate (SPI)-chitosan (CS) adducts were prepared by using dynamic microfluidic-assisted transglutaminase (TGase) modification. It was shown that the solubility and degree of binding of SPI-CS adducts prepared by dynamic microfluidic-assisted TGase modification were better. After the samples were treated twice at 400 bar, the degree of binding for SPI-CS adducts increased to 31.97 ± 1.31%, and the solubility increased to 66.25 ± 1.10%. With the increase of microfluidic pressure, the exposed free sulfhydryl groups increased, the particle size reduced, and the surface hydrophobicity first increased and then decreased. Under the action of the pressure generated by microfluidics, the structure of the protein in the SPI-CS adduct was unfolded and transformed from an ordered structure to a disordered one. The SPI-CS adducts prepared with assisted dynamic microfluidic treatment showed significantly higher ABTS radical scavenging rate, DPPH radical scavenging rate and reducing power after in vitro digestion compared with that of SPI-CS adducts prepared with TGase alone. This result indicated that appropriate dynamic microfluidic treatment improved the structural and functional properties of TGase-modified SPI-CS adducts and significantly increased the antioxidant activity after in vitro digestion.

Effects of Heat Treatment on the Structural and Functional Properties of Phaseolus vulgaris L. Protein

The paper presents the effect of heat treatment at 80 °C at different times (3, 5, 7, and 9 min) on the structural and functional properties of Phaseolus vulgaris L. protein (PVP, bean protein powder). Surface and structure properties of PVP after heat treatment were analyzed using a Fourier transform infrared spectrometer (FTIR), a fluorescence spectrophotometer, a visible light spectrophotometer, a laser particle size analyzer, and other equipment. The secondary structure and surface hydrophobicity (H0) of PVP changed significantly after heat treatment: the β-sheet content decreased from 25.32 ± 0.09% to 24.66 ± 0.09%, the random coil content increased from 23.91 ± 0.11% to 25.68 ± 0.08%, and the H0 rose by 28.96-64.99%. In addition, the functional properties of PVP after heat treatment were analyzed. After heat treatment, the emulsifying activity index (EAI) of PVP increased from 78.52 ± 2.01 m2/g to 98.21 ± 1.33 m2/g, the foaming ability (FA) improved from 87.31 ± 2.56% to 95.82 ± 2.96%, and the foam stability (FS) rose from 53.23 ± 1.72% to 58.71 ± 2.18%. Finally, the degree of hydrolysis (DH) of PVP after gastrointestinal simulated digestion in vitro was detected by the Ortho-Phthal (OPA) method. Heat treatment enhanced the DH of PVP from 62.34 ± 0.31% to 73.64 ± 0.53%. It was confirmed that heat treatment changed the structural properties of PVP and improved its foamability, emulsification, and digestibility. It provides ideas for improving PVP's potential and producing new foods with rich nutrition, multiple functions, and easy absorption.

Behavior of protein-polysaccharide conjugate-stabilized food emulsions under various destabilization conditions

The sensitivity of protein-stabilized emulsions to flocculation, coalescence, and phase separation under destabilization conditions (i.e., heating, aging, pH, ionic strength, and freeze-thawing) may limit the widespread use of proteins as effective emulsifiers. Therefore, there is a great interest in modulating and improving the technological functionality of food proteins by conjugating them with polysaccharides, through the Maillard reaction. The present review article highlights the current approaches of protein-polysaccharide conjugate formation, their interfacial properties, and the behavior of protein-polysaccharide conjugate stabilized emulsions under various destabilization conditions, including long-term storage, heating and freeze-thawing treatments, acidic conditions, high ionic strength, and oxidation. Protein-polysaccharide conjugates are capable of forming a thick and cohesive macromolecular layer around oil droplets in food emulsions and stabilizing them against flocculation and coalescence under unfavorable conditions, through steric and electrostatic repulsion. The protein-polysaccharide conjugates could be therefore industrially used to design emulsion-based functional foods with high physicochemical stability.

Investigation on the emulsification mechanism in aqueous enzymatic extraction of edible oil from Schizochytrium sp

BACKGROUND

The interaction between emulsified substances and lipids generates an emulsification system during the extraction of microalgae edible oil by aqueous enzymatic method. This study aimed to resolve the dynamics of interfacial protein adsorption during the extraction of microalgae oil at different enzymatic times and the effect on the stability of the interfacial membrane formed by the proteins based on interfacial effects.

RESULTS

At 1.5 h of enzymatic hydrolysis, the molecular weights of the proteins/peptides were all below 35 kD. In addition, the protein-peptide structure was loose, with the lowest number of disulfide bonds, peak surface hydrophobicity, the highest number of residues, and disordered lipid acyl arrangement. At the same time, the physical stability of the emulsion was the lowest, and the interfacial membrane rupture was distinct. On excessive enzymatic hydrolysis (at 3.0 h), a more uniform interfacial membrane was re-formed on the lipid surface.

CONCLUSION

Protein is the main emulsifying substance in the emulsification system. The addition of protease affects the stability of the interfacial membrane formed by proteins. In addition, sufficient enzymatic hydrolysis (1.5 h) inhibited emulsification, while excessive enzymatic hydrolysis (3.0 h) promoted emulsification. © 2023 Society of Chemical Industry.

Reversibility of freeze-thaw/re-emulsification on Pickering emulsion stabilized with gliadin/sodium caseinate nanoparticles and konjac glucomannan

The reversibility of freeze-thaw/re-emulsification of Pickering emulsion stabilized by gliadin/sodium caseinate nanoparticles (Gli/CAS NPs) was improved by adding konjac glucomannan (KGM). With the increase in the KGM concentration, the delamination of emulsions after freeze-thaw treatment was significantly improved. The microstructure showed that the presence of KGM helped to maintain the network structure of continuous phases. In particular, the particle size of the emulsion did not increase significantly after three freeze-thaw cycles when the KGM concentration was 0.6 % and the oil phase fraction was 60 %. The results of flocculation degree and coalescence degree also indicated that KGM promoted the cross-linking between particles on the surface of the droplet and increased the thickness of the interfacial film of the droplet. Rheological analysis also proved the same result: the elastic modulus of the emulsion was still larger than the viscous modulus, which showed the ideal freeze thaw reversibility. After adding KGM, the emulsion formed a strong network structure with good stability for long-term storage and reversibility for freeze-thaw cycling/re-emulsification. Thus, the emulsion has broad application prospects in food, cosmetics, and pharmaceutical fields.

Effect of salt treatment on the stabilization of Pickering emulsions prepared with rice bran protein

In this study, salt addition (NaCl and CaCl₂) was utilized to improve the stability of emulsions formed by rice bran protein (RBP). The result showed that salt addition improved the adsorption of protein on the oil-water interface and enhanced the physical stability of emulsions. Compared to NaCl condition, emulsions with CaCl₂ (especially 200 mM) addition exhibited more significant storage stability, as microscopy images showed emulsion structure unchanged and droplet size increasing slightly from 12.02 µm to 16.04 µm in 7 days. It was attributed to the strengthened particle complexation with CaCl₂ and the increased hydrophobic interactions, which is explained by the improved particle size (260.93 nm), surface hydrophobicity (1890.10) and fluorescence intensity, thus inducing dense and hardly destroyed interfacial layers. Rheological behavior analyses suggested that salt-induced emulsions had higher viscoelasticity and maintained a stable gel-like structure. The result of study explored the mechanism of salt treated protein particles, developed a further understanding of Pickering emulsion, and was beneficial to the application of RBP.

Influence mechanism of polysaccharides induced Maillard reaction on plant proteins structure and functional properties: A review

Plant proteins have high nutritional value, a wide range of sources and low cost. However, it is easily affected by the environmental factors of processing and lead the problem of poor functionality. These problems of plant proteins can be improved by the polysaccharides induced Maillard reaction. The interaction between proteins and polysaccharides through Maillard reaction can change the structure of proteins as well as improve the functional properties and biological activity. The products of Maillard reaction, such as reductone intermediates, heterocyclic compounds and melanoidins have certain antioxidant, antibacterial and other biological activities. However, heterocyclic amines, acrylamide, and products generated in the advanced stage of the Maillard reaction also have a negative impact, which may increase cytotoxicity and be associated with chronic diseases. Therefore, it is necessary to effectively control the process of Maillard reaction. This review focuses on the modification of plant proteins by polysaccharide-induced Maillard reaction and the effects of Maillard reaction on protein structure, functional properties and biological activity. It also points out how to accurately reflect the changes of protein structure in Maillard reaction. In addition, it also points out the application ways of plant protein-polysaccharide complexes in the food industry, for example, emulsifiers, delivery carriers of functional substances, and natural antioxidants due to their improved solubility, emulsifying, gelling and antioxidant properties. This review provides theoretical support for controlling Maillard reaction based on protein structure.

Effects of Sequential Enzymolysis and Glycosylation on the Structural Properties and Antioxidant Activity of Soybean Protein Isolate

The effects of limited hydrolysis following glycosylation with dextran on the structural properties and antioxidant activity of the soybean protein isolate (SPI) were investigated. Three SPI hydrolysate (SPIH) fractions, F30 (>30 kDa), F30-10 (10-30 kDa), and F10 (<10 kDa), were confirmed using gel permeation chromatography. The results demonstrated that the glycosylation of F30 was faster than that of F30-10 or F10. The enzymolysis caused the unfolding of the SPI to expose the internal hydrophobic cores, which was further promoted by the grafting of dextran, making the obtained conjugates have a loose spatial structure, strong molecular flexibility, and enhanced thermal stability. The grafting of dextran significantly enhanced the DPPH radical or •OH scavenging activity and the ferrous reducing power of the SPI or SPIH fractions with different change profiles due to their different molecular structures. The limited enzymolysis following glycosylation was proven to be a promising way to obtain SPI-based food ingredients with enhanced functionalities.

Optimization of enzymatic soy protein isolate-glucosamine conjugates to improve the freeze-thaw stability of emulsion

BACKGROUND

Using transglutaminase (TGase) is a new method to improve protein properties in order to promote protein glycosylation. This article mainly studies soy protein isolate (SPI) and glucosamine to improve the freeze-thaw stability of emulsion under the action of TGase. The degree of glycosylation was studied by the content of free amino groups and the degree of conjugation. The optimal conditions for preparing soy protein isolate-glucosamine (SPI-G) conjugate were determined by a response surface optimization model based on single-factor experiments using the creaming index of the emulsion after the first freeze-thaw cycle as the response value.

RESULTS

The results showed that the emulsion had the lowest creaming index when the conditions of protein concentration was 20 g L^-1 , mass ratio of SPI-G was 5:3 (w/w), enzyme addition amount was 10 U g^-1 , and reaction time was 2 h. The optimized modified product was measured for the creaming index after the first freeze-thaw cycle. It was found that the creaming index of the modified product SPI-G after the first freeze-thaw cycle was 9.02%, which was less than and close to the optimized model predicted value. The creaming index and optical microscopy results after three freeze-thaw cycles confirmed that the freeze-thaw stability of the SPI-G samples was significantly enhanced after optimization of the response surface model.

CONCLUSION

It showed that glycosylation promoted by TGase could improve the freeze-thaw stability of SPI emulsion, thereby broadening the application of SPI in food. © 2022 Society of Chemical Industry.

Study on the Mechanism of Phenylacetaldehyde Formation in a Chinese Water Chestnut-Based Medium during the Steaming Process

The white pulp of the Chinese water chestnut (CWC) is crisp and sweet with delicious flavours and is an important ingredient in many Chinese dishes. Phenylacetaldehyde is a characteristic flavoured substance produced in the steaming and cooking process of CWC. The steaming process and conditions were simulated to construct three Maillard reaction systems which consisted of glucose and phenylalanine, and of both alone. The simulation results showed that glucose and phenylalanine were the reaction substrates for the formation of phenylacetaldehyde. The intermediate α-dicarbonyl compounds (α-DCs) and the final products of the simulated system were detected by solid-phase microextraction (SPME) and gas chromatography-mass spectrometry (GC-MS) methods. Through the above methods the formation mechanism of phenylacetaldehyde is clarified; under the conditions of the steaming process, glucose is caramelized to produce Methylglyoxal (MGO), 2,3-Butanedione (BD), Glyoxal (GO) and other α-DCs. α-DCs and phenylalanine undergo a Strecker degradation reaction to generate phenylacetaldehyde. The optimal ratio of the amount of substance of glucose to phenylalanine for Maillard reaction is 1:4. The results can provide scientific reference for the regulation of flavour substances and the evaluation of flavour quality in the steaming process of fruits and vegetables.

Further evaluation on structural and antioxidant capacities of soy protein isolate under multiple freeze-thaw cycles

Multiple freeze-thaw (F-T) treatments could change a protein structure and affect its physicochemical activities. In this work, soy protein isolate (SPI) was subjected to multiple F-T treatments, and the changes in its physicochemical and functional properties were investigated. The three-dimensional fluorescence spectroscopy indicated that F-T treatments changed the structure of SPI, including an increase in surface hydrophobicity. Fourier transform infrared spectroscopy showed that SPI underwent denaturation, unfolding and aggregation due to the interchange of sulfhydryl-disulfide bonds and the exposure of hydrophobic groups. Correspondingly, the particle size of SPI increased significantly and the protein precipitation rate also increased from 16.69%/25.33% to 52.52%/55.79% after nine F-T treatments. The F-T treated SPI had a higher antioxidant capacity. Results indicate that F-T treatments may be used as a strategy to ameliorate preparation methods and improve functional characteristics of SPI, and suggest that multiple F-T treatment is an alternative way to recover soy proteins.

Effects of Concentration of Soybean Protein Isolate and Maltose and Oil Phase Volume Fraction on Freeze-Thaw Stability of Pickering Emulsion

There is growing interest in enhancing the freeze-thaw stability of a Pickering emulsion to obtain a better taste in the frozen food field. A Pickering emulsion was prepared using a two-step homogenization method with soybean protein and maltose as raw materials. The outcomes showed that the freeze-thaw stability of the Pickering emulsion increased when prepared with an increase in soybean protein isolate (SPI) and maltose concentration. After three freeze-thaw treatments at 35 mg/mL, the Turbiscan Stability Index (TSI) value of the emulsion was the lowest. At this concentration, the surface hydrophobicity (H₀) of the composite particles was 33.6 and the interfacial tension was 44.34 mN/m. Furthermore, the rheological nature of the emulsions proved that the apparent viscosity and viscoelasticity of Pickering emulsions grew with a growing oil phase volume fraction and concentration. The maximum value was reached in the case of the oil phase volume fraction of 50% at a concentration of 35 mg/mL, the apparent viscosity was 18 Pa·s, the storage modulus of the emulsion was 575 Pa, and the loss modulus was 152 Pa. This research is significant for the production of freeze-thaw resistant products, and improvement of protein-stabilized emulsion products with high freeze-thaw stability.

Comparison of Oxidative and Physical Stabilities of Conjugated Linoleic Acid Emulsions Stabilized by Glycosylated Whey Protein Hydrolysates via Two Pathways

The objective of the research was to analyze and compare the oxidative and physical stabilities of conjugated linoleic acid (CLA) emulsions stabilized by two glycosylated hydrolysates (GPP-A and GPP-B) that were formed via two different pathways. This study showed that GPP-A exhibited higher browning intensity and DPPH radical scavenging ability in comparison with GPP-B. Moreover, the CLA emulsion formed by GPP-A exhibited a lower creaming index, average particle size, primary and secondary oxidative products, in comparison with GPP-B-loaded emulsion. However, the GPP-A-loaded emulsion showed a higher absolute potential and fraction of interfacial adsorption than that of the CLA emulsion formed by GPP-B. Therefore, the CLA emulsion formed by GPP-A exhibited stronger stabilities in comparison with the GPP-B-loaded emulsion. These results suggested that GPP-A showed an emulsification-based delivery system for embedding CLA to avoid the loss of biological activities. Additionally, the development of CLA emulsions could exert its physiological functions and prevent its oxidation.

Conjugation of soy protein isolate (SPI) with pectin: effects of structural modification of the grafting polysaccharide

Recently, there has been a great interest in enhancing the emulsifying properties of soy protein isolate (SPI) by Maillard reaction. As a commonly-used grafting polysaccharide, pectin has proved useful in modifying proteins. However, effects of its structural characteristics on conjugation are still not fully understood. To address this problem, we employed alkaline or/and enzymatic treatments to modify pectin and obtained three modified samples. Structural characteristics of pectin, including the molecular weight, degree of methoxylation and acetylation, and monosaccharide compositions were measured. When conjugated with SPI, pectin with lower molecular weight and less main chains induced higher conjugate yield. Fluorescence intensity and surface hydrophobicity of all conjugates markedly reduced compared to the original SPI, suggesting a more loosened protein structure after Maillard reaction. In this study, the enzymolysis pectin proved an optimum grafting polysaccharide considering the simple preparation procedures and the highest emulsifying properties of its resulting conjugates.

Pea protein isolate-inulin conjugates prepared by pH-shift treatment and ultrasonic-enhanced glycosylation: Structural and functional properties

The application of pea proteins in the food industry is often limited by their poor functional properties, such as solubility, emulsification, and gelation. To address this problem, a novel method of constructing pea protein-inulin conjugates with improved functional attributes was developed, which consisted of combining a high-intensity ultrasonic treatment with a pH-shift wet heating method. This combined method promoted the Maillard reaction, leading to a grafting degree that was 2.3-times higher than that of the traditional wet heating method. SDS-PAGE confirmed the formation of pea protein-inulin conjugates. The pea protein-inulin conjugates had higher solubility than pea proteins alone, especially around the isoelectric point of the protein. Furthermore, the thermal stability, antioxidant activity, foaming and emulsifying properties of the conjugates were better than those of the protein. This study shows that the combined ultrasound/pH-shift wet heating method is highly effective at improving the functional properties of pea proteins.

Recent progress in oil-in-water-in-oil (O/W/O) double emulsions

Oil-in-water-in-oil (O/W/O) double emulsions are recognized as an advanced design route for oil structuring that shows promising applications in the pharmaceutical, cosmetic, and food fields. This review summarizes the main research advances of O/W/O double emulsions over the past two decades. It mainly focuses on understanding the preparation strategies, stabilization mechanism, and potential applications of O/W/O double emulsions. Several emulsification strategies are discussed, including traditional two-step emulsification method, phase-inversion approach, membrane emulsification, and microfluidic emulsification. Further, the role of interfacial stabilizers and viscosity in the stability of O/W/O double emulsions will be discussed with a focus on synthetic emulsifiers, natural biopolymer sand solid particles for achieving this purpose. Additionally, analytical methods for evaluating the stability of O/W/O double emulsions, such as advanced microscopy, rheology, and labeling assay are reviewed taking into account potential limitations of these characterization techniques. Moreover, possible innovative food applications are highlighted, such as simulating fat substitutes to decrease the trans- or saturated fatty acid content and developing novel delivery and encapsulation systems. This review paves a solid way for the exploration of O/W/O double emulsions toward large-scale implementation within the food industry.

Improved Oxidation Stability of Camellia Oil-in-Water Emulsions Stabilized by the Mixed Monolayer of Soy Protein Isolate/Bamboo Shoot Protein Complexes

The complex of soy protein isolate (SPI)/bamboo shoot protein concentrate (BPC) was developed to stabilize camellia oil-in-water (O/W) emulsions. The surface hydrophobicity of the BPC/SPI complex driven by hydrogen bonds and electrostatic attractions was improved. With the increasing ratio of BPC in the complex, a tighter network layer structure of the complex was formed due to the rearrangement of proteins, and the emulsions showed a progressive enhancement in the gel-like structures. At the SPI/BPC ratio of 2:1, the emulsions had smaller droplet size and lower creaming index of 230 nm and 30%, and the emulsifying activity and stability indices of the emulsions were 803.72 min and 11.85 g/m², respectively, indicating a better emulsifying activity and stability of emulsions. Meanwhile, the emulsions stabilized by the complex at the ratio of 2:1 showed better storage and antioxidant stability. These findings are expected to develop the application of bamboo shoots in emulsion-based food products such as mayonnaise, salad dressings, and sauces.

Whey protein isolate-gum Acacia Maillard conjugates as emulsifiers for nutraceutical emulsions: Impact of glycation methods on physicochemical stability and in vitro bioaccessibility of β-carotene emulsions

The physicochemical stability and in vitro bioaccessibility of β-carotene emulsions stabilized by the whey protein isolate (WPI)-gum Acacia (GA) conjugates prepared by dry-heating (Con WPI (D)) and ultrasound (Con WPI (U)) Maillard reaction were investigated in this study. The conjugate-stabilized emulsions have a larger mean size than the WPI-stabilized emulsion. The stability of emulsions under freeze-thaw treatment, high ionic strength conditions, thermal treatment and pH conditions near the isoelectric point of WPI were improved by glycation. The chemical stability of β-carotene in emulsions was also enhanced by WPI-GA conjugates. The WPI-GA conjugate-stabilized emulsions have better stability for droplet aggregation during in vitro simulated gastrointestinal digestion, which increased β-carotene bioaccessibility. However, the Con WPI (U)-stabilized emulsion shows poor thermal stability and lower β-carotene bioaccessibility than the Con WPI (D)-stabilized emulsion, which may be attributed to ultrasound-induced structural changes during the process of glycation.

The Role of Ultrasound in the Preparation of Zein Nanoparticles/Flaxseed Gum Complexes for the Stabilization of Pickering Emulsion

Ultrasound is one of the most commonly used methods to prepare Pickering emulsions. In the study, zein nanoparticles-flaxseed gum (ZNP-FSG) complexes were fabricated through various preparation routes. Firstly, the ZNP-FSG complexes were prepared either through direct homogenization/ultrasonication of the zein and flaxseed gum mixture or through pretreatment of zein and/or flaxseed gum solutions by ultrasonication before homogenization. The Pickering emulsions were then produced with the various ZNP-FSG complexes prepared. ZNP-FSG complexes and the final emulsions were then characterized. We found that the complex prepared by ultrasonication of zein as pretreatment followed by homogenization of the ZNP with FSG ((ZNP_U-FSG)H) exhibited the smallest turbidity, highest absolute potential value, relatively small particle size, and formed the most stable complex particles. Meanwhile, complex prepared through direct ultrasonication plus homogenization on the mixture ((ZNP-FSG)HU) showed significantly decreased emulsifying properties and stability. Compared with the complex without ultrasonic treatment, the complex and emulsion, which prepared by ultrasonicated FSG were extremely unstable, and the phase separation phenomenon of the emulsion was observed 30 min after preparation. The above conclusions are also in line with the findings obtained from the properties of the corresponding emulsions, such as the droplets size, microstructure, freeze-thaw stability, and storage stability. It is, therefore, clear that to produce stable Pickering emulsion, ultrasonication should be avoided to apply together at the end of ZNP-FGS complex preparation. It is worth noticing that the emulsions prepared by complex with ultrasonicated zein (ZNP_U-FSG)H are smaller, distributed more uniformly, and are able to encapsulate oil droplets well. It was found that the emulsions prepared with ZNP_U-FSG remained stable without serum phase for 14 days and exhibited improved stability at low-temperature storage. The current study will provide guidance for the preparation of protein–polysaccharide complexes and Pickering emulsions for future work.

Current Progress in the Utilization of Soy-Based Emulsifiers in Food Applications-A Review

Soy-based emulsifiers are currently extensively studied and applied in the food industry. They are employed for food emulsion stabilization due to their ability to absorb at the oil–water interface. In this review, the emulsifying properties and the destabilization mechanisms of food emulsions were briefly introduced. Herein, the effect of the modification process on the emulsifying characteristics of soy protein and the formation of soy protein–polysaccharides for improved stability of emulsions were discussed. Furthermore, the relationship between the structural and emulsifying properties of soy polysaccharides and soy lecithin and their combined effect on the protein stabilized emulsion were reviewed. Due to the unique emulsifying properties, soy-based emulsifiers have found several applications in bioactive and nutrient delivery, fat replacer, and plant-based creamer in the food industry. Finally, the future trends of the research on soy-based emulsifiers were proposed.