Functional properties of chickpea protein-pectin interfacial complex in buriti oil emulsions and spray dried microcapsules

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Efficient Fabrication of Self-Assembled Polylactic Acid Colloidosomes for Pesticide Encapsulation

Colloidosomes are microcapsules whose shells are composed of cumulated or fused colloidal particles. When colloidosomes are used for in situ encapsulation, it is still a challenge to achieve a high encapsulation efficiency and controllable release by an effective fabrication method. Herein, we present a highly efficient route for the large-scale preparation of colloidosomes. The biodegradable polylactic acid (PLA) nanoparticles (NPs) as shell materials can be synthesized using an antisolvent precipitation method, and the possible formation mechanism was given through the molecular dynamics (MD) simulation. The theoretical values are basically consistent with the experimental results. Through the use of the modified and unmodified PLA NPs, the colloidosomes with controllable shell porosities can be easily constructed using spray drying technology. We also investigate the mechanism of colloidosomes successfully self-assembled by PLA NPs with various factors of inlet temperature, feed rate, and flow rates of compressed air. Furthermore, avermectin (AVM) was used as a model for in situ encapsulation and a controllable release. The spherical modified colloidosomes encapsulating AVM not only achieve a small mean diameter of 1.57 μm but also realize a high encapsulation efficiency of 89.7% and impermeability, which can be further verified by the MD simulation. AVM molecules gather around and clog the shell pores during the evaporation of water molecules. More importantly, the PLA colloidosomes also reveal excellent UV-shielding properties, which can protect AVM from photodegradation.

Application of spray drying, spray chilling and the combination of both methods to produce tucumã oil microparticles: characterization, stability, and β-carotene bioaccessibility

The aim of this work was to produce tucumã oil (PO) microparticles using different encapsulation methods, and to evaluate their properties, storage stability and bioaccessibility of the encapsulated β-carotene. Gum Arabic was used as carrier for spray drying (SD), while vegetable fat was the wall material for spray chilling (SC) and the combination of the methods (SDC). Powders were yellow (hue angle around 80°) and presented particles with small mean diameters (1.57-2.30 µm). PO and the microparticles possess high β-carotene contents (∼0.35-22 mg/g). However, some carotenoid loss was observed in the particles after encapsulation by SD and SDC (around 20%). After 90 days of storage, SDC particles presented the lowest degradation of total carotenoids (∼5%), while SD samples showed the highest loss (∼21%). Yet, the latter had the lowest contents of conjugated dienes (4.1-5.3 µmol/g) among treatments. At the end of simulated digestion, PO and the microparticles provided low β-carotene bioaccessibility (<10%), and only SC increased this parameter compared to the pure oil. In conclusion, carotenoid-rich microparticles with attractive color were obtained through microencapsulation of PO by SD, SC and SDC, revealing their potential as natural additives for the development of food products with improved nutritional properties. The SC method stood out for providing microparticles with high carotenoid content and retention, high oxidative stability, and improved β-carotene bioaccessibility.

Strategies for improving loading of emulsion-based functional oil powder

Functional oil is type of oil that is beneficial to human health and has nutritional value, however, functional oils are rich in bioactive substances such as polyunsaturated fatty acids which are sensitive to environmental factors and are susceptible to oxidation or decomposition. Construction of emulsion-based oil powder is a promising approach for improving the stability and solubility of functional oils. However, the low effective loading of oil in powder is the main challenge limiting encapsulation technology. This manuscript focuses on reviewing the current research progress of emulsion-based functional oil powder construction and systematically summarizes the processing characteristics of emulsion-based oil powder with high payload and summarizing the strategies to enhance the payload of powder in term of emulsification and drying, respectively. The impact of emulsion formation on oil powder production is discussed from different characteristics of emulsions, including emulsion composition, emulsification methods and emulsion types. In addition, the current status of improving material loading performance by various modifications to the drying technology is discussed, including the addition of drying processing additives, changes in drying parameters and the effect of innovative technological means.

Storage Stability of Spray- and Freeze-Dried Chitosan-Based Pickering Emulsions Containing Roasted Coffee Oil: Color Evaluation, Lipid Oxidation, and Volatile Compounds

Drying Pickering o/w emulsions has been considered as a promising strategy to produce oil microcapsules, as long as their quality parameters can be preserved over storage. In this sense, it is shown as an interesting alternative to preserve the quality of roasted coffee oil, a valuable agroindustrial byproduct. Thus, freeze- and spray-dried chitosan-based Pickering emulsions of roasted coffee oil were evaluated over 30 days of storage at 25 °C together with the non-encapsulated oil as a control. Water sorption isotherms were determined, whereas color, oxidative stability (peroxide value and conjugated dienes) and volatile compounds were assessed over the storage period. Type II isotherms and Guggenheim–Anderson–Boer (GAB) model parameters showed that water binding was impaired by the surface oil in freeze-dried samples. Oxidation was maintained under acceptable values over the storage for all samples, with slightly higher protection also observed for volatile compounds in the spray-dried particles. The powdered emulsions were able to suitably preserve the oil’s quality over 30 days of storage, enabling its commercialization and application as a food ingredient and potential flavoring.

Multiscale combined techniques for evaluating emulsion stability: A critical review

Emulsions are multiscale and thermodynamically unstable systems which will undergo various unstable processes over time. The behavior of emulsifier molecules at the oil-water interface and the properties of the interfacial film are very important to the stability of the emulsion. In this paper, we mainly discussed the instability phenomena and mechanisms of emulsions, the effects of interfacial films on the long-term stability of emulsions and summarized a set of systematic multiscale combined methods for studying emulsion stability, including droplet size and distribution, zeta-potential, the continuous phase viscosity, adsorption mass and thickness of the interfacial film, interfacial dilatational rheology, interfacial shear rheology, particle tracking microrheology, visualization technologies of the interfacial film, molecular dynamics simulation and the quantitative evaluation methods of emulsion stability. This review provides the latest research progress and a set of systematic multiscale combined techniques and methods for researchers who are committed to the study of oil-water interface and emulsion stability. In addition, this review has important guiding significances for designing and customizing interfacial films with different properties, so as to obtain emulsion-based delivery systems with varying stability, oil digestibility and bioactive substance utilization.

Artificial Neural Networks to Optimize Oil-in-Water Emulsion Stability with Orange By-Products

The use of artificial neural networks (ANNs) is proposed to optimize the formulation of stable oil-in-water emulsions (oil 6% w/w) with a flour made from orange by-products (OBF), rich in pectins (21 g/100 g fresh matter), in different concentrations (0.95, 2.38, and 3.40% w/w), combined with or without soy proteins (0.3 and 0.6% w/w). Emulsions containing OBF were stable against coalescence and flocculation (with 2.4 and 3.4% OBF) and creaming (3.4% OBF) for 24 h; the droplets' diameter decreased up to 44% and the viscosity increased up to 37% with higher concentrations of OBF. With the protein addition, the droplets' diameter decreased by up to 70%, and flocculation increased. Compared with emulsions produced with purified citrus pectins (0.2 and 0.5% w/w), OBF emulsions exhibited up to 32% lower viscosities, 129% larger droplets, and 45% smaller Z potential values. Optimization solved with ANNs minimizing the droplet size and the emulsion instability resulted in OBF and protein concentrations of 3.16 and 0.14%, respectively. The experimental characteristics of the optimum emulsion closely matched those predicted by ANNs demonstrating the usefulness of the proposed method.

Improved protective and controlled releasing effect of fish oil microcapsules with rice bran protein fibrils and xanthan gum as wall materials

This study aimed to prepare fish oil microcapsules by freeze-drying an emulsion co-stabilized by rice bran protein fibrils (RBPFs) and xanthan gum (XG) to improve the oxidation stability and controlled release effect. Emulsions stabilized either solely by RBPFs or unfibrillated rice bran protein (RBP) or by a combination of RBP and XG were also fabricated as microcapsule templates for comparison. The rheological properties, particle size, and zeta potential of the emulsions were examined. In addition, the characteristics of the fish oil microcapsules such as surface oil content, encapsulation efficiency, water activity, moisture content, morphological structure, oxidation stability, and digestive performance were also assessed. The rheological properties revealed that the addition of XG increased the storage modulus of the emulsion and reduced the loss modulus and apparent viscosity. At shear rates of 0-100 s^-1, the fish oil emulsion did not exhibit any gel properties or shear thinning. Fibrillation increased the particle size of the fish oil emulsion, whereas adding XG reduced the droplet size. The combination of RBP fibrillation and XG addition provided the highest encapsulation efficiency for fish oil. Fibrillation reduced the water activity and moisture content of the fish oil microcapsules. The anisotropy of the fibrils and the high viscosity of XG produced a layer of wrapping on the continuous heterogeneous surface of the freeze-dried powder particles. RBPF/XG microcapsules stored at 45 °C for 1 month had the lowest peroxide value and thiobarbituric acid value, the lowest surface oil content, and the lightest yellowness. These results suggest that the combination of RBPFs and XG provides better encapsulation and protective effects for fish oil microcapsules. Upon simulated digestion, the microcapsules containing XG and RBPFs exhibited a more favorable controlled release of free fatty acids. These findings indicate that microcapsules formed from emulsions co-stabilized by XG and RBPFs are suitable for encapsulating fish oil in functional foods.

Pickering emulsion stabilized by hydrolyzed starch: Effect of the molecular weight

HYPOTHESIS

The emulsifying ability of starch is influenced by its molecular weight. Reducing the molecular weight of starch is expected to influence interfacial adsorption and membrane elasticities, thereby affecting its emulsifying ability through Pickering effects. Hence, it should be possible to tailor the emulsifying ability of starch by adjusting its molecular weight.

EXPERIMENTS

Waxy corn starch (CS) and rice starch (RS) were hydrolyzed with pullulanase to obtain high (HM) and low molecular weight (LM) fractions. After the molecular weight was determined by size exclusion chromatography, the fractions were used to prepare model oil-in-water emulsions. The stability, microscopy, and particle size of the emulsions were characterized, and the underlying emulsification mechanism was subsequently studied through dynamic laser scattering, surface tension analysis, interfacial rheology, and Pearson's correlation calculations.

FINDINGS

In the molecular weight range obtained in this study, the smaller the molecular weight of starch, the stronger its emulsifying ability. The decrease in molecular weight resulted in considerable different adsorption and interfacial elasticities with smaller fractions occupying less area on the interface and forming interfaces with higher elasticities, resulting in higher stabilities through Pickering effects. Results thus suggest that the emulsifying ability of starch may be tailored by adjusting its molecular weight.

Functional Properties of Physically Pretreated Kidney Bean and Mung Bean Flours and Their Performance in Microencapsulation of a Carotenoid-Rich Oil

Microencapsulation can improve protection for compounds that degrade easily, such as β-carotene that is present in large amounts in buriti oil (Mauritia flexuosa). Encapsulating matrices are mainly composed of proteins and polysaccharides, which are often combined to improve their performance as a protective barrier. Beans, such as dark red kidney beans (Phaseolus vulgaris) and mung beans (Vigna radiata), are excellent protein sources that contain significant amounts of the essential amino acids. Bean flours are low in fat and naturally provide a blend of high-quality protein and carbohydrates that may stabilize lipophilic compounds for subsequent spray-drying. Whole bean flours, rather than refined individual biopolymers, may represent more sustainable alternative wall materials for microencapsulate bioactive compounds. This work aimed to evaluate the use of flours produced from red kidney beans and mung beans, which have been submitted to different physical pretreatments, as wall materials for microencapsulation of buriti oil by spray-drying. Different bean treatments were evaluated: untreated (control), soaked in water for 24 h, and soaked in water for 24 h followed by boiling for 30 min. The flours' proximate composition was not affected by the treatments (p &lt; 0.05), showing similar values of carbohydrate (63.8–67.9%), protein (19.2–24.6%), and lipid (1.2–1.9%) contents. Both bean species had the water absorption capacity (WAC) increased by boiling, while the oil absorption capacity (OAC) was not altered by the treatments. Flours produced with raw or soaked beans showed emulsion activity (EA) and emulsion stability (ES) greater than 70%. Raw bean flours also showed better foaming properties, which may be indicative of higher levels of antinutritional factors. The soaked bean flours showed the best results for both type of beans, especially with regard to emulsifying properties, and were selected as wall materials for buriti oil microencapsulation. Different ratios of flour and maltodextrin were used to produce oil-in-water emulsions that were then spray-dried. Buriti oil microcapsules showed good physicochemical properties, with moisture around 3%, aw &lt;0.3, and hygroscopicity around 5%. The carotenoid encapsulation efficiency ranged from 68.2 to 77.9%. Bean flours showed to function as a sustainable and nutrient-rich alternative wall material for microencapsulation.

Emerging drying techniques for food safety and quality: A review

The new trends in drying technology seek a promising alternative to synthetic preservatives to improve the shelf-life and storage stability of food products. On the other hand, the drying process can result in deformation and degradation of phytoconstituents due to their thermal sensitivity. The main purpose of this review is to give a general overview of common drying techniques with special attention to food industrial applications, focusing on recent advances to maintain the features of the active phytoconstituents and nutrients, and improve their release and storage stability. Furthermore, a drying technique that extends the shelf-life of food products by reducing trapped water, will negatively affect the spoilage of microorganisms and enzymes that are responsible for undesired chemical composition changes, but can protect beneficial microorganisms like probiotics. This paper also explores recent efficient improvements in drying technologies that produce high-quality and low-cost final products compared to conventional methods. However, despite the recent advances in drying technologies, hybrid drying (a combination of different drying techniques) and spray drying (drying with the help of encapsulation methods) are still promising techniques in food industries. In conclusion, spray drying encapsulation can improve the morphology and texture of dry materials, preserve natural components for a long time, and increase storage times (shelf-life). Optimizing a drying technique and using a suitable drying agent should also be a promising solution to preserve probiotic bacteria and antimicrobial compounds.

Microencapsulation of carotenoid-rich materials: A review

Carotenoids are natural pigments that present several bioactive properties, including antioxidant, anticarcinogenic and provitamin A activities. However, these compounds are susceptible to degradation when exposed to a number of conditions (e.g. light, heat, oxygen), leading to loss of benefits and hampering their application in food products. Their hydrophobicity also makes incorporation into water-based foods more difficult. Microencapsulation techniques have been applied for decades to provide stability to carotenoid-rich extracts under typical conditions of processing and storage of foods, besides offering several other advantages to the use and application of these materials. This work reviews the recent advances in the microencapsulation of carotenoid-rich extracts, oils and oleoresins from varying sources, evidencing the technologies applied to encapsulate these materials, the effects of encapsulation on the obtained particles, and the impact of such processes on the bioaccessibility and release profile of carotenoids from microparticles. Moreover, recent applications of carotenoid-rich microparticles in food products are discussed. Most of the applied processes were effective in improving different aspects of the encapsulated materials, especially the stability of carotenoids during storage, resulting in microparticles with promising properties for future applications in food products. However, the lack of information about the effects of microencapsulation on carotenoids during processing of model foods, the sensory acceptance of enriched food products and the bioaccessibility and bioavailability of microencapsulated carotenoids reveals gaps that should be explored in the future.

Gelatin nanoparticles enable water dispersibility and potentialize the antimicrobial activity of Buriti (Mauritia flexuosa) oil

Background

Buriti oil presents numerous health benefits, but due to its lipophilic nature and high oxidation, it is impossible to incorporate it into aqueous food matrices. Thus, the present study evaluated whether powder nanoparticles based on porcine gelatin (OPG) and in combination with sodium alginate (OAG) containing buriti oil obtained by O/W emulsification followed by freeze-drying enabled water dispersibility and preserved or increased the antimicrobial activity of the oil.

Results

OPG presented spherical shape, smooth surface, smaller particle size and polydispersity index [51.0 (6.07) nm and 0.40 (0.05)], and better chemical interaction between the nonpolar amino acids and the hydrophobic oil chain. OPG also presented a higher dispersibility percentage [85.62% (7.82)] than OAG [50.19% (7.24)] (p < 0.05), and significantly increased the antimicrobial activity of the oil by 59, 62, and 43% for Pseudomonas aeruginosa, Klebsiella pneumonia, and Staphylococcus aureus, respectively.

Conclusions

Thus, nanoencapsulation in gelatin is a promising strategy to increase the potential to use buriti oil in foods.