Effect of CMC degree of substitution and gliadin/CMC ratio on surface rheology and foaming behavior of gliadin/CMC nanoparticles

Effects of side-chain lengths on the structure and properties of anhydrides modified starch micelles: Experimental and DPD simulation studies

Anhydride-modified starch micelles have great potential in the delivery of hydrophobic guest molecules. This study aimed to experimentally explore the effects of side-chain lengths on the structure and properties of anhydride-modified starch micelles, and to visualize the self-assembly and loading process of these micelles through Dissipative particle dynamics (DPD) simulations. Starch micelles could only form when the carbon chain length exceeded four. The highly hydrophobic C18 starch micelle exhibited the minimum particle size (65 nm) and maximum loading capability (59.10 μg/mg). For each addition carbon atom in the anhydride side chains, the critical micelle concentration (CMC) of starch micelles decreased average of 1.79 %. Thermodynamic results showed that the micellization was an entropy-dominated driven process, and longer carbon chains enhanced the stability of starch micelles. DPD results showed that the starch chains formed the small clusters then spherical aggregates and finally core-shell structure spherical micelle. Curcumin was loaded into micelles by adjoint aggregation-micellization-adsorption mechanism. Overall, this study provides microscopic insight into the micellization and drug-loading mechanisms for anhydrides modified starch micelles.

Insighting the effect of ultrasound-assisted polyphenol non-covalent binding on the functional properties of myofibrillar proteins from golden threadfin (Nemipterus virgatus)

In this study, the effect of ultrasound-assisted non-covalent binding of different polyphenols (tannins, quercetin, and resveratrol) on the structure and functional properties of myofibrillar proteins (MP) from the golden threadfin (Nemipterus virgatus) was investigated. The effect of ultrasound-assisted polyphenol incorporation on the structure and properties of MP was evaluated by multispectral analysis, interfacial properties, emulsification properties and antioxidant properties et al. The results revealed that the protein-polyphenol interaction led to a conformational change in the microenvironment around the hydrophobic amino acid residues, resulting in an increase in the equilibrium of the MP molecules in terms of affinity and hydrophobicity. Ultrasound assisted polyphenols addition also led to a significant decrease of the oil/water interfacial tension (from 21.22 mN/m of MP to 8.66 mN/m of UMP-TA sample) and a significant increase of the EAI (from 21.57 m2/g of MP to 28.79 m2/g of UMP-TA sample) and ES (from 84.76 min of MP to 124.25 min of UMP-TA). In addition, ultrasound-assisted polyphenol incorporation could enhance the antioxidant properties of MP, with the DPPH and ABTS radical scavenging rate of UMP-TA increase of 47.7 % and 55.2 % in comparison with MP, respectively. The results demonstrated that the noncovalent combination with polyphenols under ultrasound-assisted conditions endowed MP with better functional properties, including solubility, emulsification, foaming, and antioxidant properties through structure change. This study can provide innovative theoretical guidance for effectively preparing aquatic protein-polyphenol non-covalent complexes with multiple functions and improving the processing and utilization value of aquatic proteins.

Soft gliadin nanoparticles at air/water interfaces: The transition from a particle-laden layer to a thick protein film

HYPOTHESIS

Protein-based soft particles possess a unique interfacial deformation behavior, which is difficult to capture and characterize. This complicates the analysis of their interfacial properties. Here, we aim to establish how the particle deformation affects their interfacial structural and mechanical properties.

EXPERIMENTS

Gliadin nanoparticles (GNPs) were selected as a model particle. We studied their adsorption behavior, the time-evolution of their morphology, and rheological behavior at the air/water interface by combining dilatational rheology and microstructure imaging. The rheology results were analyzed using Lissajous plots and quantified using the recently developed general stress decomposition (GSD) method.

FINDING

Three distinct stages were revealed in the adsorption and rearrangement process. First, spherical GNPs (∼105 nm) adsorbed to the interface. Then, these gradually deformed along the interface direction to a flattened shape, and formed a firm viscoelastic 2D solid film. Finally, further stretching and merging of GNPs at the interface resulted in rearrangement of their internal structure to form a thick film with lower stiffness than the initial film. These results demonstrate that the structure of GNPs confined at the interface is controlled by their deformability, and the latter can be used to tune the properties of prolamin particle-based multiphase systems.

Understanding the foam stability mechanisms of complex formed by soy protein isolate and different charged polysaccharides: Air/water interfacial behavior and rheological characteristics

This study evaluated the foaming properties, the dynamic adsorption behavior at the air/water (A/W) interface and the foam rheological characteristics of complexes formed by soy protein isolate (SPI) and different charged polysaccharides, including chitosan (CS), guar gum (GUG) and gellan gum (GEG). The results showed that the SPI/CS10 had the highest initial foam volume (26.67 mL), which were 3.89 %, 100.08 % and 70.19 % higher than that of single SPI, SPI/GUG and SPI/GEG complexes, respectively. Moreover, three charged polysaccharides could all significantly improve the foam stability of complexes. Among them, foams stabilized by SPI/GEG10 were the most stable that the foam volume slightly changed (approximately 1 mL) and no drainage occurred throughout the whole recording process. The interfacial behavior analysis showed that SPI/CS10 had higher diffusion (Kdiff) and rearrangement rate (KR) but lower penetration rate (KP) at the A/W interface compared with single SPI, while SPI/GUG10 and all SPI/GEG complexes showed higher KR and KP but lower Kdiff. In addition, SPI/CS10 was beneficial to concurrently enhance the elastic strength and solid-like behavior of foam system, while all SPI/GEG complexes could improve the elastic strength of foam system but was not conducive to the solid-like behavior.

A ternary composite hydrogel based on sodium alginate, carboxymethyl cellulose and copper-doped 58S bioactive glass promotes cutaneous wound healing in vitro and in vivo

Hydrogels offer a novel approach to wound repair. In this study, we synthesized a ternary composite using sodium alginate (SA), carboxymethyl cellulose (CMC) and copper-doped 58S bioactive glass (BG). According to our mechanical testing results, the composite made of 7 wt% CMC and 7 wt% BG (SA-7CMC-7BG) showed optimal properties. In addition, our in vitro studies revealed the biocompatibility and bioactivity of SA-7CMC-7BG, with a negative zeta potential of -31.7 mV. Scanning electron microscope (SEM) images showed 273-μm-diameter pores, cell adhesion, and anchoring. The SA-7CMC-7BG closed 90.4 % of the mechanical scratch after 2 days. An in vivo wound model using Wistar rats showed that SA-7CMC-7BG promoted wound healing, with 85.57 % of the wounds healed after 14 days. Treatment with the SA-7CMC-7BG hydrogel caused a 1.6-, 65-, and 1.87-fold increase in transforming growth factor beta (TGF-β), Col I, and vascular endothelial growth factor (VEGF) expression, respectively that prevents fibrosis and promotes angiogenesis. Furthermore, interleukin 1β (IL-1β) expression was downregulated by 1.61-fold, indicating an anti-inflammatory effect of SA-7CMC-7BG. We also observed an increase in epidermal thickness, the number of fibroblast cells, and collagen deposition, which represent complementary pathology results confirming the effectiveness of the SA-7CMC-7BG hydrogel in cutaneous wound healing.

Effect of Lactobacillus plantarum fermentation on the physicochemical properties and flavor of rice protein-carboxymethylcellulose complexes

BACKGROUND

Fermentation is known to enhance the nutritional profile and confer unique flavors to products. However, the resultant effects on stability and physicochemical properties remain unexplored.

RESULTS

This study aims to elucidate the influence of fermentation on the stability and organoleptic characteristics of a rice protein beverage stabilized by carboxymethyl cellulose (CMC). The findings revealed that the average aggregate size escalated from 507 to 870 nm, concurrently exhibiting a significant increase in surface potential. The aggregation enhancement was substantiated by evident morphological changes and confocal laser scanning microscopical (CLSM) observations. A negative correlation was discerned between the physical stability of the beverage and fermentation duration. Moreover, flavor analysis of the beverage post a 3 h fermentation period highlighted an increase in aromatic ester compounds, thereby intensifying the aroma.

CONCLUSION

The study corroborates that fermentation can detrimentally influence product stability while concurrently improving its flavor profile. By establishing a mix ratio of 10:1 for rice protein and CMC and forming a relatively stable system through electrostatic interaction at a pH of 5.4, a flavorful rice protein beverage can be derived post 3 h-fermentation process. These findings offer insights into the impact of varying fermentation durations on the stability and flavor of polysaccharide-based rice protein beverages. © 2023 Society of Chemical Industry.

Glycation Improved the Interfacial Adsorption and Emulsifying Performance of β-Conglycinin to Stabilize the High Internal Phase Emulsions

This study investigated the interfacial adsorption and emulsifying performance of glycated β-conglycinin (7S) with D-galactose (Gal) at various times. Results indicated that glycation increased the particle sizes and zeta potentials of glycated 7S by inducing subunit dissociation. Glycation destroyed the tertiary structures and transformed secondary structures from an ordered one to a disordered one, leading to the more flexible structures of glycated 7S compared with untreated 7S. All these results affected the structural unfolding and rearrangement of glycated 7S at the oil/water interface. Therefore, glycated 7S improved interfacial adsorption and formed an interfacial viscoelasticity layer, increasing emulsifying performance to stabilize high internal phase emulsions (HIPE) with self-supportive structures. Furthermore, the solid gel-like network of HIPE stabilized by glycated 7S led to emulsification stability. This result provided new ideas to improve the functional properties of plant proteins by changing the interfacial structure.

Functional and structural properties of gliadin as influenced by pH, extraction protocols, and wheat cultivars

Gliadin, owing to its low cost, ease to extract, high foaming capacity, easily available and high surface hydrophobicity, has found a wide range of applications both in the food and pharmaceutical sectors. The functional and structural characteristics of gliadin extracted with four extraction protocols from six wheat cultivars were investigated in this study. The surface-active properties of gliadin protein as a function of pH, extraction protocols, and wheat cultivars were compared, including solubility, zeta-potential, foaming properties, emulsion properties, surface hydrophobicity and secondary structure. Overall gliadin extracted using different extraction protocols and from different wheat cultivars was found to be higher in β-turns (24.88-37.91 %), followed by β-sheet (12.81-22.37 %), α-helix (15.13-20.70 %) and lower in random coil (6.53-9.08 %). Varied pH ranges, wheat cultivars, and different extraction protocols were found to have a substantial impact on solubility, zeta potential, foaming stability, emulsion capacity and surface hydrophobicity. The foaming capacity was observed to be more influenced by extraction protocols than wheat cultivars. Emulsion stability showed statistically significant (p ≤ 0.05) influence between the wheat cultivars, and a non-significant (p ≥ 0.05) difference among extraction protocols. The functional properties of freeze-dried gliadin extracted using different protocols were found to be pH-dependent. A comprehensive understanding of how the structural, surface active and functional properties of gliadin are influenced by the extraction protocols and wheat cultivars will enable us to understand the gliadin better and broaden its use for both food and non-food applications.

Tuning the electrostatic interaction between rice protein and carboxymethyl cellulose toward hydrophilic composites with enhanced functional properties

Protein-polysaccharide interactions have attracted much attention due to inherent potential in generating new structures and functionalities. In the present study, by simply mixing rice proteins (RPs) with carboxymethyl cellulose (CMC) at pH 12.0 prior neutralization, novel protein-polysaccharide complexes (RCs) were structured with water dispersibility and functionalities highly dependent on the degree of substitution (DS) and molecular weight (Mw) of CMC. Specifically, the water-dispersibility of RPs was increased from 1.7 % to 93.5 % at a RPs/CMC mass ratio of 10:1 with CMC of DS1.2 (Mw = 250 kDa). Fluorescence and circular dichroism spectra showed suppressed folding tendency of RPs by CMC during neutralizing the basicity, indicating controllable protein conformations. Furthermore, the structures of RCs became more unfolded for CMC with a larger DS or a smaller Mw. This enabled RCs with highly controllable functionalities in terms of emulsifying and foaming properties, which may have promising applications in developing food matrix with customized structures and textures.

Relevance of the air-water interfacial and foaming properties of (modified) wheat proteins for food systems

A shift from animal protein- to plant protein-based foods is crucial in transitioning toward a more sustainable global food system. Among food products typically stabilized by animal proteins, food foams represent a major category. Wheat proteins are ubiquitous and structurally diverse, which offers opportunities for exploiting them for food foam and air-water interface stabilization. Notably, they are often classified into those that are soluble in aqueous systems (albumins and globulins) and those that are not (gliadins and glutenins). However, gliadins are at least to an extent water extractable and thus surface active. We here provide a comprehensive overview of studies investigating the air-water interfacial and foaming properties of the different wheat protein fractions. Characteristics in model systems are related to the functional role that wheat proteins play in gas cell stabilization in existing wheat-based foods (bread dough, cake batter, and beer foam). Still, to further extend the applicability of wheat proteins, and particularly the poorly soluble glutenins, to other food foams, their modification is required. Different physical, (bio)chemical, and other modification strategies that have been utilized to alter the solubility and therefore the air-water interfacial and foaming properties of the gluten protein fraction are critically reviewed. Such approaches may open up new opportunities for the application of (modified) gluten proteins in other food products, such as plant-based meringues, whippable drinks, or ice cream. In each section, important knowledge gaps are highlighted and perspectives for research efforts that could lead to the rational design of wheat protein systems with enhanced functionality and overall an increased applicability in food industry are proposed.

Enzymatic hydrolysis re-endows desalted duck egg white nanogel with outstanding foaming properties

Heat-induced gel-assisted desalination could efficiently and inexpensively remove salt from salted egg whites. However, it was at the expense of the excellent foaming properties of egg whites, caused by the denaturation and aggregation of proteins during heating treatment. Hence, in this current work, the enzymatic treatment was used to re-endow duck egg white nanogels (DEWN) with outstanding foaming properties. We found that low levels of hydrolysis (DH = 2.27 %) could dramatically improve the foaming capability (FC), reaching >200 %, which also enhanced the foaming stability (FS). As the hydrolysis time extended, the adsorption and diffusion rate of the supernatant on the interface increased and performed high elasticity. The dilatational rheology and Lissajous plots were explored to investigate the nonlinear dilatational rheological behaviors of the air/water interface stabilized by the hydrolysed samples. Finally, we evaluated the effect of pH on foaming properties and found that the FC could exceed 250 %, and the FS was close to 80 % at pH = 5. These encouraging results showed that simple enzymatic treatment could revive nanogels from their dissatisfied foaming properties. In this work, gel-assisted desalination combined with enzyme treatment significantly promotes the high-quality and high-value utilization of salted egg white.

Ultrasonic-assisted pH shift-induced interfacial remodeling for enhancing the emulsifying and foaming properties of perilla protein isolate

In order to expand the applications of plant protein in food formulations, enhancement of its functionalities is meaningful. Herein, the effects of ultrasonic (20 KHz, 400 W, 20 min)-assisted pH shift (pH 10 and 12) treatment on the structure, interfacial behaviors, as well as the emulsifying and foaming properties of perilla protein isolate (PPI) were investigated. Results showed that the solubility of PPI treated by ultrasonic-assisted pH shift (named UPPI-10/12) exceeded 90 %, which was at least 2 and 1.4 times that of untreated PPI and ultrasound-based PPI. Meanwhile, UPPI-10/12 possessed higher foamability (increasing by at least 1.2 times) and good emulsifying stability. Ultrasonic-assisted pH shift treatment decomposed large PPI aggregates into tiny particles, evident from the dynamic light scattering (DLS) and atomic force microscopy results. Besides, this approach induced a decrease in α-helix of PPI and an increase in β-sheet, which might result in the exposure of the hydrophobic group on the structural surface of PPI, thus leading to the increase of surface hydrophobicity. The smaller size and higher hydrophobicity endowed UPPI-10/12 faster adsorption rate, tighter interfacial structure, and higher elastic modulus at the air- and oil-water interfaces, evident from the cryo-SEM and interfacial dilatational rheological results. Thus, the emulsifying and foaming properties could evidently enhance. This study demonstrated that ultrasonic-assisted pH shift technique was a simple approach to effectively improve the functional performance of PPI.

Strong influence of degree of substitution on carboxymethyl cellulose stabilized sulfidated nanoscale zero-valent iron

Carboxymethyl cellulose (CMC) has been widely adopted as stabilizer to enhance the subsurface mobility of nanoscale zerovalent iron (nZVI). However, CMC surface modification also cause severe decrease of the longevity and electron utilization efficiency (ε_e) of nZVI, which is still not well understood. In this study, we demonstrate the negative influence of CMC on the properties of sulfidated nZVI (S-nZVI) could be reversed by increasing the degree of substitution (D.S.) of CMC. Consistent with previous study, the sample CMC-S-nZVI prepared with commercial CMC with degree of substitution (D.S.) of 0.75 exhibited a considerable low longevity of 33 days with ε_e of 4.5%, much lower than that of sulfidated nZVI (S-nZVI, 113 days and 13%). In sharp contrast, the sample HCMC-S-nZVI synthesized with CMC with super high D.S. of 1.76 demonstrated significantly enhanced longevity of 139 days and ε_e of 20%. The enhancement was attributed to compatible molecular structure of CMC with super high D.S. Moreover, the HCMC-S-nZVI also exhibited higher mobility in porous media than CMC-S-nZVI. Our work provides a feasible way to prepare S-nZVI with desired properties including high subsurface transportability, high longevity and high ε_e.

Fabrication and characterization of superior stable Pickering emulsions stabilized by propylene glycol alginate gliadin nanoparticles

Gliadin, a kind of amphiphilic protein from wheat, has been widely used for stabilizing Pickering emulsions, which is easy to form colloidal particles. Herein, gliadin/propylene glycol alginate (PGA) colloidal particles (GPPs) with different gliadin/PGA ratios were developed and used as emulsifiers to prepare Pickering emulsions with an internal phase of 80% (v/v). The addition of PGA made the GPPs a tree-fruit-like morphology, increasing the particle size and changing the zeta-potential. Hydrogen bond and electrostatic interaction are the major forces between gliadin and PGA. The wettability of GPPs was improved significantly in the presence of PGA. The oil-water contact angle reached 89.5° when the gliadin/PGA ratio was 1 : 1. The emulsion could be maintained at room temperature for 6 months when the oil phase ratio (Φ) was 70%. The high stability of the Pickering emulsion could be attributed to the thin film formed by GPPs on the surface of oil droplets. The improved resistance of algal oil in emulsions against oxidation was proved as the induction time increased six times. In addition, the porous material prepared using GPPs-stabilized emulsion as the template displayed an oil absorption ability of 106.41 g g^-1 and heavy metal adsorption ability of 202.71 mg g^-1. Such performance implies that GPPs are highly efficient food-grade Pickering emulsifiers that may be applied in various fields.

Effect of ultrasonic pretreatment on the emulsification properties of Clanis Bilineata Tingtauica Mell protein

Clanis Bilineata Tingtauica Mell Protein (CBTMP) is a naturally high-quality insect protein resource, while its poor emulsification has limited its application in food industry. In order to change the present situation, in this research, the ultrasonic pretreatment (0 W, 200 W, 400 W, 600 W, and 800 W) method was used to improve the emulsification properties of CBTMP. Results indicated that ultrasound treatment especially at 400 W could significantly change the particle sizes, further increase the content of sulfhydryl group and surface hydrophobicity. The emulsification properties of emulsions were enhanced (from 4.16 ± 1.07 m²/g to 27.62 ± 2.20 m²/g) by sonicated CBTMP solution. Moreover, the physical stability of the emulsions to salt stress and centrifugation treatment was also promoted. Additionally, rheology revealed that a stronger network was formed at 400 W and all samples exhibited frequency-dependent and amplitude-dependent properties. The experiment demonstrated that ultrasound pretreatment was an effective means to improve the emulsification properties of CBTMP and it could provide a promising perspective for the application of CBTMP in food industry.