Amino acids, polyols and soluble fibres as sugar replacers in bakery applications: Egg white proteins denaturation controlled by hydrogen bond density of solutions

A Bio-Inspired Methylation Approach to Salt-Concentrated Hydrogel Electrolytes for Long-Life Rechargeable Batteries

Hydrogel electrolytes hold great promise in developing flexible and safe batteries, but the presence of free solvent water makes battery chemistries constrained by H2 evolution and electrode dissolution. Although maximizing salt concentration is recognized as an effective strategy to reduce water activity, the protic polymer matrices in classical hydrogels are occupied with hydrogen-bonding and barely involved in the salt dissolution, which sets limitations on realizing stable salt-concentrated environments before polymer-salt phase separation occurs. Inspired by the role of protein methylation in regulating intracellular phase separation, here we transform the "inert" protic polymer skeletons into aprotic ones through methylation modification to weaken the hydrogen-bonding, which releases free hydrogen bond acceptors as Lewis base sites to participate in cation solvation and thus assist salt dissolution. An unconventionally salt-concentrated hydrogel electrolyte reaching a salt fraction up to 44 mol % while retaining a high Na+ /H2 O molar ratio of 1.0 is achieved without phase separation. Almost all water molecules are confined in the solvation shell of Na+ with depressed activity and mobility, which addresses water-induced parasitic reactions that limit the practical rechargeability of aqueous sodium-ion batteries. The assembled Na3 V2 (PO4 )3 //NaTi2 (PO4 )3 cell maintains 82.8 % capacity after 580 cycles, which is the longest cycle life reported to date.

Sucrose substitution in cake systems is not a piece of cake

Successful sucrose replacement in cake systems requires thorough understanding of its functionality. Time-domain 1H NMR showed that water in the viscous aqueous phase isolated from cake batter by ultracentrifugation [i.e. the batter liquor (BL)] exhibits low mobility by its low T2 relaxation time (T2,D RT). This is due to its interactions with sucrose or sucrose replacers. The T2,D RT itself is positively related with the effective volumetric hydrogen bond density of sucrose or sucrose replacers. Sucrose additionally co-determines the quantity and viscosity of cake BL and thereby how much air the batter contains at the end of mixing. Like sucrose, maltitol and oligofructose provide adequate volumes of BL with low water mobility and thus sufficient air in the batter, while the rather insoluble mannitol and inulin do not. Differential scanning calorimetry and rapid viscosity analysis revealed, however, that, in contrast to sucrose and maltitol, oligofructose fails to provide appropriate timings of starch gelatinisation and protein denaturation, resulting in poor cake texture. The shortcomings of mannitol and oligofructose in terms of respectively ensuring appropriate gas content in batter and biopolymer transitions during baking can be overcome by using mixtures thereof. This work shows that successful sucrose substitutes or substitute mixtures must provide sufficient BL with low water mobility and ensure appropriate timings of starch and protein biopolymer transitions during baking.

Thermal Behavior of Pea and Egg White Protein Mixtures

The partial substitution of animal protein by plant protein is a new opportunity to produce sustainable food. Hence, to control the heat treatment of a composite protein ingredient, this work investigated the thermal behavior of mixtures of raw egg white (EW) and a laboratory-prepared pea protein isolate (PPI). Ten-percentage-by-weight protein suspensions prepared with different PPI/EW weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) at pH 7.5 and 9.0 were analyzed by differential scanning calorimetry (DSC) and dynamic rheology in temperature sweep mode (T < 100 °C). The DSC data revealed changes in the thermal denaturation temperatures (Td) of ovotransferrin, lysozyme, and pea legumin, supposing interactions between proteins. Denaturation enthalpy (∆H) showed a high pH dependence related to pea protein unfolding in alkaline conditions and solubility loss of some proteins in admixture. Upon temperature sweeps (25-95 °C), the elastic modulus (G') of the mixtures increased significantly with the EW content, indicating that the gel formation was governed by the EW protein. Two thermal sol-gel transitions were found in EW-containing systems. In particular, the first sol-gel transition shifted by approximately +2-3 °C at pH 9.0, probably by a steric hindering effect due to the presence of denatured and non-associated pea globulins at this pH.

Thermal gelation and digestion properties of hen egg white: Study on the effect of neutral and alkaline salts addition

In this study, the thermal gelation and digestion properties of hen egg white (hen EW) proteins with different salts were investigated. Results show that the addition of neutral salt - sodium chloride (NaCl) decreased the gel hardness/resilience, increased gel lightness, aggregated particle size and digestibility of hen EW proteins significantly. In contrast, alkaline salts - phosphate and carbonate addition increased the gel resilience and strain tolerance as well as reduced the aggregated particle size and gel lightness of hen EW proteins due to the increase of solution pH and negative charge. Correlation analysis shows that the digestibility of hen EW gels was affected by gel viscoelasticity, molecule forces and texture. In conclusion, thermal gelation properties of hen EW proteins could be modulated by salts with different pH/ionic strength, and thus affected the protein digestion and peptide released.

Mechanisms of the different effects of sucrose, glucose, fructose, and a glucose-fructose mixture on wheat starch gelatinization, pasting, and retrogradation

The gelatinization, pasting, and retrogradation of starch influence texture, quality, and shelf-life attributes of many foods. The purpose of this work was to document the effects of a 50:50 glucose:fructose (glc:fru) mixture and sucrose solutions on these starch traits to provide a fundamental basis to explain the different texture and shelf-life attributes of baked goods formulated with these sugars. Differential scanning calorimetry, rapid visco analyzer, and oscillatory rheometry were used to quantify the effects of glucose, fructose, glc:fru mixture, and sucrose at different concentrations (0% to 60% w/w), on the gelatinization temperature, pasting, and retrogradation properties of wheat starch. Distinct differences were found between the effects of sucrose and those of the monosaccharides including the glc:fru mixture. Sucrose elevated T_gel and pasting temperature most and decreased other RVA parameters compared to the monosaccharides as concentration increased. Fructose and the glc:fru mixture promoted amylopectin retrogradation, while retrogradation was inhibited in sucrose and glucose solutions. The glc:fru mixture had similar effects on starch properties compared to fructose under static measurement conditions (DSC), and the effects were in between those of glucose and fructose under dynamic conditions when shear was applied (RVA and rheology). These effects are explained by the phase separation and/or solute partitioning of the monosaccharide constituents of the glc:fru mixture. Sugar solution physicochemical properties correlated strongly with starch gelatinization and retrogradation. The results substantiate the important relationship between sugar physicochemical properties and solution dynamics with starch thermal properties, which in turn affect the texture and structure of starch-containing food products. PRACTICAL APPLICATION: The quality attributes of starch-containing baked goods are influenced by how different amounts and types of sugars affect starch cooking properties. The underlying mechanisms of the different sugar effects involve solution viscosity, intermolecular hydrogen bonding, and phase separation. Substituting one sugar for another has less effect on these starch properties in products with lower sugar concentrations than in products with more sugar. Mixtures of sugars behave differently than single sugars in different conditions due to phase separation. Baked goods made with glucose:fructose mixtures in place of sucrose likely have higher amounts of gelatinized starch and increased firmness (i.e., staling or retrogradation) over time.

Interactions in plasticizer mixtures used for sugar replacement

In our quest for novel ingredients to be used in sugar replacement strategies, we have investigated the thermodynamics of polycarboxylic acids, such as citric acid. We have demonstrated the applicability of the Flory-Huggins (FH) theory to describe the thermodynamics of polycarboxylic acids solutions. Moreover, for citric acid we can describe the complete phase diagram with the theory. It shows that polycarboxylic acids have similar plasticizing and hygroscopic properties as sugars and polyols. Regarding mixtures of polycarboxylic acids and carbohydrates, the FH theory is able to describe a) the water activity of the mixtures, b) the solubility of ternary mixtures of acids and sugars, c) the lowering of the deliquescence point for binary mixtures of crystals, and d) the melting point depression in eutectic mixtures. Unexpectingly, our investigations show there is a strong non-zero FH interaction parameter between carboxylic acids and carbohydrates. In our prior sugar replacement strategy we have assumed zero interactions between plasticizers. Here, we will readdress this assumption. Carefull investigations of solid-liquid equilibrium of eutectic mixtures involving polycarboxylic acids and/or carbohydrates, shows nearly zero interaction in eutectic mixtures consisting only of two carbohydrates or two polycarboxylic acids. We now hold the hypothesis that there is strong non-zero interaction if the mixture contains plasticizers strongly differing in the amount of hydrogen bonding groups. This strong interaction explains why these mixtures, like polycarboxylic acids and carbohydrates, are excellent candidates as deep eutectic solvents. Furthermore, we conclude that polycarboxylic acids are useful additions to the toolbox of sugar replacers, albeit that there are some limitations to their amounts used.

Oligosaccharides elevate the gelatinization temperature of wheat starch more than sucrose, paving the way for their use in reduced sugar starch-based formulations

The gelatinization of wheat starch influences the final structure and texture of baked goods. Sucrose effectively elevates the gelatinization temperature (T_gel) of starch more than many sweeteners, and maintaining a higher T_gel has been a challenge while reducing the amount of sucrose in baked goods. The objective of this study was to quantify the effects of 14 different oligosaccharides (OS: maltose, isomaltulose, kestose, maltotriose, melezitose, raffinose, stachyose, a fructo-OS, a galacto-OS, an isomalto-OS, lactosucrose, a xylo-OS, and two glucose-based dextrins), allulose, and sucrose at different concentrations (0 to 60% w/w) on the T_gel of wheat starch using DSC, and to determine which OS physicochemical properties best explained the T_gel results. OS type and concentration significantly altered T_gel. Many OS elevated the T_gel as much as or more than sucrose at the same solution concentrations, while allulose did not. The onset T_gel in water was 60 °C, in 60% sucrose was 96 °C, in 60% allulose was 80 °C, and T_gel increased up to 107-108 °C in 60% fructo-OS and Nutriose® solutions. The effects of OS on T_gel correlated most strongly (r > 0.95) with two OS solution parameters: the solvent effective volume fraction (ϕ_w,eff, related to solute intermolecular hydrogen bond density) and solution viscosity, to a lesser extent with solution water activity, and not to the glass transition temperature of the OS. Based on T_gel elevation, many of the OS are promising sucrose replacements in baked goods, which could facilitate their use in desirable higher fiber, reduced sugar starch-based baked product formulations.

Chitosan-regulated biomimetic hybrid nanoflower for efficiently immobilizing enzymes to enhance stability and by-product tolerance

Organic-inorganic hybrid nano-materials have been considered to be promising immobilization matrixes for enzymes due to their significantly enhanced reusability and stability of enzymes. Herein, we constructed a novel organic-inorganic hybrid nanoflower via biomacromolecule-regulated biomimetic mineralization to immobilize sucrose phosphorylase (SPase). It was found that chitosan (CS) effectively regulated the biomimetic mineralization of calcium phosphate (CaP), leading to the formation of flower-like hybrid materials for the entrapment of SPase via self-assembly to establish a nano-biocatalyst (CS-CaP@SPase). Upon immobilization, the obtained CS-CaP@SPase exhibited excellent pH, by-product and organic solvents tolerance, and storage stability. Specifically, at acidic condition (pH 4), CS-CaP@SPase performed over 80 % of initial activity, which was 2.42-folds higher than that of free SPase. The catalytic activity of free SPase was severely inhibited about 30 % in the presence of fructose (1.2 M), but CS-CaP@SPase only lost 5 % relative activity. The CS-CaP@SPase retained over 80 % of its relative activity, while the free SPase maintained <20 % of its relative activity in acetonitrile. The relative activity of CS-CaP@SPase was still retained about 80 % after 10 cycles and maintained 75 % after 15 days. Based on Raman spectra analysis, it was also found that the increased β-folding component of SPase in the secondary structure after immobilization was the main factor for its enhanced stability. It is reasonable to believe that biomacromolecule-regulated biomimetic mineralization could be potentially used as a promising method to immobilize enzymes with excellent stability and recyclability, thereby facilitating the preparation of highly efficient catalysts for industrial biocatalysts, biosensing, and biomedicine.

Use of Stevia and inulin in combination with bovine plasma proteins as sugar substitute for the development of a sugar-free and low-fat muffins formulation

This study analyzes the effectivity of a freeze-dried additive formulated with inulin (I), Stevia (St), and ultrafiltered bovine plasma proteins (P) as a sugar substitute on the final properties of a sugar-free and low-fat muffins formulation. The following analysis were performed: shape factor, moisture loss, lamella thickness, final volume, aeration, pore size distribution and textural analysis. The addition of the binary combination 50%(P + St + I) + 50%(Sucralose) generated a synergistic effect: increasing the shape factor, final volume and aeration, and improving the pore size distribution and moisture loss. Given the success, the concentration of (P + St + I) was adjusted. A 12.5% concentration of (P + St + I) generated a hardness decrease during the studied period and did not exhibit statistical significant differences when compared to the control sample. Therefore this study demonstrated the effectiveness of the combination of Stevia, inulin, and bovine plasma proteins as sugar substitute.

Dry Heating of Cowpea Flour below Biopolymer Melting Temperatures Improves the Physical Properties of Bread Made from Climate-Resilient Crops

Improving the technological functionality of climate-resilient crops (CRCs) to promote their use in staple foods, such as bread, is relevant to addressing food and nutrition security in Africa. Dry heating of cowpea flour (CPF) was studied as a simple technology to modulate CPF physicochemical properties in relation to bread applications. For this purpose, the melting behavior of cowpea starch and proteins in CPF was first studied and modeled using Flory–Huggins theory for polymer melting. Next, dry-heating conditions were investigated based on the predicted biopolymer melting transitions in CPF to be well below starch and protein melting. The pasting properties (i.e., peak viscosity, final viscosity, breakdown and setback) of CPF could be selectively modulated depending on temperature-time combinations without altering the thermal behavior (i.e., melting enthalpies) of CPF. Water-binding capacity and soluble solids decreased with the increased severity of the temperature-time combinations. Dry-heated CPF added to CRC-based bread significantly improved crumb texture. In particular, dry heating at 100 °C for 2 h provided bread with the highest crumb softness, cohesiveness and resilience. The positive effects on the crumb texture could be largely related to enhanced starch integrity, as indicated by a reduction in breakdown viscosity after treatment. Overall, dry heating of CPF under defined conditions is a promising technology for promoting the use of CPF as a techno-functional and protein-rich ingredient in bread-type products.

Sugar, salt and fat reduction of bakery products

From the health viewpoint, consumers monitor their food uptake in terms of both quality and quantity, due to awareness of the link between food ingredients and health. Accordingly, many people tend to buy healthy food products that are low in or free of sugar, salt and fat. However, in baked products, the sugar, fat and salt are needed to create unique characteristics. The role of sugar, salt and fat in baked products is discussed in this chapter to understand their functions. The understanding is necessary to design proper techniques to reduce the amount of sugar, salt and fat. Ingredients and additives that can substitute for fat, sugar and salt in bakery characteristics are reviewed in terms of their advantages and disadvantages. In addition, alternative processes to reduce the use of fat, sugar and salt are proposed in this chapter.

A Systematic Comparison of the Intrinsic Properties of Wheat and Oat Bran Fractions and Their Effects on Dough and Bread Properties: Elucidation of Chemical Mechanisms, Water Binding, and Steric Hindrance

This study aimed at elucidating the contribution of chemical interactions, water binding, and steric hindrance on the effect of wheat and oat brans and of their fractions, i.e., soluble and insoluble, on dough and bread properties. For such purpose, an inert filler, i.e., glass beads of comparable particle size and with no water binding capacity and moisture sorption properties, was also studied. The glass beads provided breads most similar to the control, indicating the limited role of steric hindrance. Brans and bran fractions showed distinct compositional and physical properties. The soluble fraction from oat bran, rich in β-glucan, was less hygroscopic than the wheat counterpart and could bind more water, resulting in larger detrimental effects on bread quality. The β-glucan content showed a prevalent role in affecting gluten development, the thermo-setting behaviour of the dough, and crumb texture, i.e., cohesiveness and resilience. Overall, the comparison between the two brans and their fractions indicated that the interplay between water binding, mainly provided by the insoluble fraction, and the plasticizing properties of the soluble bran fraction controlled the effects on bread volume and texture. From a compositional standpoint, β-glucan content was a determining factor that discriminated the effects of wheat and oat brans.

Understanding functionality of sucrose in cake for reformulation purposes

We review the functionality of sucrose during the manufacture of cakes from the perspective of sugar replacement. Besides providing sweetness, sucrose has important functionalities concerning structure formation. These functionalities also need to be mimicked in reformulated cakes. First, we review the hypotheses, concerning the development of structure and texture of cakes during manufacturing, which are conveniently summarized in a qualitative way using the Complex Dispersed Systems methodology. Subsequently, we represent the changes of the state of the cake during manufacturing in a supplemented state diagram, which indicates the important phase transitions occurring during baking. From the analysis, we have learned that sucrose act both as a plasticizer and as a humectant, modifying the phase transitions of biopolymers, dough viscosity, and water activity. If sugar replacers exactly mimick this behavior of sucrose, similar textures in reformulated cakes can be obtained. Physical theories exist for characterizing the plasticizing and hygroscopic behavior of sugars and their replacers. We have shown that the starch gelatinization and egg white denaturation can be predicted by the volumetric density of hydrogen bonds present in the solvent, consisting of water, sugar or its replacers, such as polyols or amino-acids.