In-mouth breakdown behaviour and sensory perception of emulsion gels containing active or inactive filler particles loaded with capsaicinoids

Effect of salting and dehydration treatments on the physicochemical and gel properties of hen and duck egg yolks, plasma and granules

BACKGROUND

Salted hen egg yolks are less oily and less flavorful than salted duck egg yolks. However, hen eggs have a more adequate market supply and have a broader application prospect than duck eggs. In the present study, egg yolks, plasma, and granules were dehydrated by adding 1% NaCl to simulate traditional curing process of salted egg yolk. The changes in the pickling process of hen egg yolks (HEY) and duck egg yolks (DEY) plasma and granules were compared to reveal the gelation mechanism and the underlying causes of quality differences in salted HEY and DEY. Salted HEY can be compared with the changes in DEY during the pickling process to provide a theoretical basis for the quality improvement of salted HEY to salted DEY.

RESULTS

The results showed that both plasma and granules were involved in gel formation, but exhibited different aggregation behaviors. Based on the intermolecular forces, the HEY proteins achieved aggregation mainly through hydrophobic interactions and DEY proteins mainly through covalent binding. According to spin-spin relaxation time, HEY gels immobilized a large amount of lipid and interacted strongly with lipids. DEY gels showed much free lipid and had weak interaction with lipid. The microstructure showed that HEY proteins were easily unfolded to form a homogeneous three-dimensional gel network structure after salting, whereas heterogeneous aggregates were formed to hinder the gel development in DEY. Changes in protein secondary structure content showed that pickling can promote the transformation of the α-helices to β-sheets structure in HEY gels, whereas more α-helices structure was formed in DEY gels.

CONCLUSION

The present study has demonstrated that different gelation behaviors of hen and duck egg yolk proteins (especially in plasma) through salting treatment led to the difference in the quality of salted HEY and DEY. © 2024 Society of Chemical Industry.

Effect of Multi-Mode Divergent Ultrasound Pretreatment on Hardness, Microstructure and Digestion of Acid-Induced Whey Protein Gels

Whey protein was pretreated with multi-frequency ultrasound in mono-, dual-, and tri-frequency modes. The effect of multi-frequency ultrasound pretreatment on the hardness, chemical forces, and microstructure of acid-induced whey protein gel was investigated. Whey protein gels pretreated with dual- and tri-frequency ultrasound showed higher hardness (p < 0.05) and a denser network than mono-frequency ultrasound and control. Moreover, they had higher hydrophobic interaction and lower disulfide bonds than the control (p < 0.05). The effect of gel properties on digestion was evaluated using an in vitro static model. Whey protein gels pretreated with dual- and tri-frequency ultrasound had a higher proportion of large fragments in the oral boluses than in the control. Large fragments (>3.35 mm) in those samples were resistant to gastric digestion. Moreover, the tri-frequency ultrasound pretreatment of whey protein gel released the least free amino group during gastric digestion. In contrast, whey protein gel with the mono-frequency ultrasound pretreatment released the highest amount of free amino acid group during intestinal digestion. Findings from this study suggests that gel hardness and network density could modulate the digestion behaviors of protein gels.

Characterizations of emulsion gel formed with the mixture of whey and soy protein and its protein digestion under in vitro gastric conditions

Partially replacing animal proteins with plant proteins to develop new products has much attention. To get knowledge of their application in emulsion gels, heat-induced composite protein emulsion gels were fabricated using the mixtures of whey protein isolate (WPI) and soy protein isolate (SPI) with the final total protein concentration of 10% (w/w). The water holding capacity (WHC), mechanical and rheological properties and microstructure of mixed protein emulsion gels prepared at different WPI to SPI ratios (100:0, 90:10, 70:30, 50:50, 30:70, 10:90, 0:100, w/w) were investigated. The ratios of WPI to SPI showed little effect on the WHC of the mixed protein emulsion gels (p > 0.05). Increasing the ratio of SPI decreased the hardness and storage modulus (G') of mixed protein emulsion gels, whereas the porosity of mixed protein emulsion gels in the microstructure increased, as shown by CLSM. Both β-lactoglobulin and α-lactalbumin from WPI and 7 S and 11 S from SPI participated in forming the gel matrix of mixed protein emulsion gels. More protein aggregates existed as the gel matrix filler at the high soy protein levels. Interestingly, the G' of mixed protein emulsion gels at the WPI to SPI ratio of 50:50 was higher than the sum of G' of individual WPI and SPI emulsion gels. The whey protein network predominated the gel matrix, while soy protein predominated in the active filling effect. When subjected to an in vitro dynamic gastric digestion model, soy protein in the gels (WPI:SPI = 50:50) degraded faster than whey protein during gastric digestion. This study provided new information on the characteristics of composite protein emulsion gel fabricated with the WPI and SPI mixture.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Capsaicin encapsulated in W/O/W double emulsions fabricated via ethanol-induced pectin gelling: Improvement of bioaccessibility and reduction of irritation

Capsaicin is a water-insoluble bioactive component with several beneficial physiological functions. However, the widespread application of this hydrophobic phytochemical is limited by its low water-solubility, intense irritation, and poor bioaccessibility. These challenges can be overcome by entrapping capsaicin within the internal water phase of water-in-oil-in-water (W/O/W) double emulsions via using ethanol to induce pectin gelling. In this study, ethanol was used both to dissolve capsaicin and to promote pectin gelation, thereby forming capsaicin-loaded pectin hydrogels that were used as the internal water phase of the double emulsions. Pectin addition improved the physical stability of the emulsions and led to a high encapsulation efficiency of capsaicin (>70 % after 7d storage). After simulated oral and gastric digestion, capsaicin-loaded double emulsions maintained their compartmentalized structure, avoiding capsaicin leakage in the month and stomach. The double emulsions were digested in the small intestine, thereby releasing the capsaicin. Capsaicin bioaccessibility was significantly enhanced after encapsulation, which was attributed to mixed micelle formation by the digested lipid phase. Furthermore, encapsulation of capsaicin within the double emulsions reduced the irritation in the gastrointestinal tissues of mice. This kind of double emulsion may have great potential for the development of more palatable capsaicin-loaded functional food products.

Protein-Based Fat Replacers: A Focus on Fabrication Methods and Fat-Mimic Mechanisms

The increasing occurrence of obesity and other non-communicable diseases has shifted the human diet towards reduced calorie intake. This drives the market to develop low-fat/non-fat food products with limited deterioration of textural properties. Thus, developing high-quality fat replacers which can replicate the role of fat in the food matrix is essential. Among all the established types of fat replacers, protein-based ones have shown a higher compatibility with a wide range of foods with limited contribution to the total calories, including protein isolate/concentrate, microparticles, and microgels. The approach to fabricating fat replacers varies with their types, such as thermal-mechanical treatment, anti-solvent precipitation, enzymatic hydrolysis, complexation, and emulsification. Their detailed process is summarized in the present review with a focus on the latest findings. The fat-mimic mechanisms of fat replacers have received little attention compared to the fabricating methods; attempts are also made to explain the underlying principles of fat replacers from the physicochemical prospect. Finally, a future direction on the development of desirable fat replacers in a more sustainable way was also pointed out.

Recent progress in emulsion gels: from fundamentals to applications

Emulsion gels, also known as gelled emulsions or emulgels, have garnered great attention both in fundamental research and practical applications due to their superior stability, tunable morphology and microstructure, and promising mechanical and functional properties. From an application perspective, attention in this area has been, historically, mainly focused on food industries, e.g., engineering emulsion gels as fat substitutes or delivery systems for bioactive food ingredients. However, a growing body of studies has, in recent years, begun to demonstrate the full potential of emulsion gels as soft templates for designing advanced functional materials widely applied in a variety of fields, spanning chemical engineering, pharmaceutics, and materials science. Herein, a concise and comprehensive overview of emulsion gels is presented, from fundamentals to applications, highlighting significant recent progress and open questions, to scout for and deepen their potential applications in more fields.

Digestion behaviour of capsaicinoid-loaded emulsion gels and bioaccessibility of capsaicinoids: Effect of emulsifier type

In this study, the effect of emulsifier type, i.e. whey protein versus Tween 80, on the digestion behaviour of emulsion gels containing capsaicinoids (CAPs) was examined. The results indicate that the CAP-loaded Tween 80 emulsion gel was emptied out significantly faster during gastric digestion than the CAP-loaded whey protein emulsion gel. The Tween-80-coated oil droplets appeared to be in a flocculated state in the emulsion gel, had no interactions with the protein matrix and were easily released from the protein matrix during gastric digestion. The whey-protein-coated oil droplets showed strong interactions with the protein matrix, and the presence of thick protein layer around the oil droplets protected their liberation during gastric digestion. During intestinal digestion, the CAP-loaded Tween 80 emulsion gel had a lower extent of lipolysis than the CAP-loaded whey protein emulsion gel, probably because the interfacial layer formed by Tween 80 was resistance to displacement by bile salts, and/or because Tween 80 formed interfacial complexes with bile salts/lipolytic enzymes. Because of the softer structure of the CAP-loaded Tween 80 emulsion gel, the gel particles were broken down much faster and the oil droplets were liberated from the protein matrix more readily than for the CAP-loaded whey protein emulsion gel during intestinal digestion; this promoted the release of CAP molecules from the gel. In addition, the Tween 80 molecules displaced from the interface would participate in the formation of mixed micelles and would help to solubilize the released CAP molecules, leading to improved bioaccessibility of CAP. Information obtained from this study could be useful in designing functional foods for the delivery of lipophilic bioactive compounds.

Gel-type emulsified muscle products: Mechanisms, affecting factors, and applications

The gel-type emulsified muscle products improve fatty acid composition, maintain the oxidative stability, and achieve a better sensory acceptability. This review emphasizes the stabilization mechanisms of these emulsified muscle products. In particular, factors associated with the stability of the emulsified muscle systems are outlined, including the processing conditions (pH and heating), lipids, and emulsifiers. Besides, some novel systems are further introduced, including the Pickering emulsions and organogels, due to their great potential in stabilizing emulsified gels. Moreover, the promising prospects of emulsion muscle products such as improved gel properties, oxidative stability, freeze-thaw stability, fat replacement, and nutraceutical encapsulation were elaborated. This review comprehensively illustrates the considerations on developing gel-type emulsified products and provides inspiration for the rational design of emulsified muscle formulations with both oxidatively stable and organoleptically acceptable performance.

Updated design strategies for oral delivery systems: maximized bioefficacy of dietary bioactive compounds achieved by inducing proper digestive fate and sensory attributes

Interest in the application of dietary bioactive compounds (DBC) in healthcare and pharmaceutical industries has motivated researchers to develop functional delivery systems (FDS) aiming to maximize their bioefficacy. As the direct and indirect health benefiting effects of DBC are acknowledged, traditional design principle of FDS aiming at improving the bioavailability of intact DBC is challenged by the updated one, where the maximized bioefficacy of DBC delivered by FDS will be achieved via rationally absorbed at target sites with proper metabolism pathways. This article briefly summarized the absorption and metabolic fates of orally digested DBC along with their direct and indirect mechanisms to perform health benefiting effects. Current strategies in designing the next generation FDS with an emphasis on their modulation effects on the distribution portion between the upper and lower digestive tract, portal vein and lymphatic absorption, human digestive and gut microbiota enzymatic mediated metabolism were highlighted. Updated research progresses of FDS in adjusting sensory attributes of food end products and inducing synergistic effects rooting from matrix materials and co-delivered cargos were also discussed. Challenges as well as future perspectives concerning the precise nutrition and the critical role of delivery systems in dietary intervention were proposed.

Current Perspectives on Food Oral Processing

Food oral processing (FOP) is a fast-emerging research area in the food science discipline. Since its first introduction about a decade ago, a large amount of literature has been published in this area, forming new frontiers and leading to new research opportunities. This review aims to summarize FOP research progress from current perspectives. Food texture, food flavor (aroma and taste), bolus swallowing, and eating behavior are covered in this review. The discussion of each topic is organized into three parts: a short background introduction, reflections on current research findings and achievements, and future directions and implications on food design. Physical, physiological, and psychological principles are the main concerns of discussion for each topic. The last part of the review shares views on the research challenges and outlooks of future FOP research. It is hoped that the review not only helps readers comprehend what has been achieved in the past decade but also, more importantly, identify where the knowledge gaps are and in which direction the FOP research will go.

New insights into food O/W emulsion gels: Strategies of reinforcing mechanical properties and outlook of being applied to food 3D printing

3D printing technology has been widely used in food processing with its advantages of customized food design, personalized nutrition design, and simplified food supply chain. Food emulsion gels have application value and prospects in food 3D printing due to their promising properties, including biodegradability, biocompatibility, as well as dual characteristics of emulsions and biopolymer gels. Food emulsion gels with appropriate mechanical properties, as a new type of food inks, expand the types and functions of the inks. However, food emulsion gels without adequate reinforced mechanical properties may suffer from defects in shape, texture, mouthfeel, and functionality during 3D printing and subsequent applications. Therefore, it is necessary to summarize the strategies to improve the mechanical properties of food emulsion gels. According to the methods of characterizing the mechanical properties of emulsion gels, this article summarizes four strategies for improving the mechanical properties of emulsion gels through two ways: inside-out (reinforcement of interface and reinforcement of cross-linking) and outside-in (physical approaches and environmental regulations), as well as their basic mechanisms. The application status and future research trends of emulsion gels in food 3D printing are finally discussed.

Understanding the oral processing of solid foods: Insights from food structure

Understanding the relationship between the structure of solid foods and their oral processing is paramount for enhancing features such as texture and taste and for improving health-related factors such as management of body weight or dysphagia. This paper discusses the main aspects of the oral processing of solid foods across different categories: (1) oral physiology related to chewing, (2) in-mouth food transformation, (3) texture perception, and (4) taste perception, and emphasis is placed on unveiling the underlying mechanisms of how food structure influences the oral processing of solid foods; this is exemplified by comparing the chewing behaviors for a number of representative solid foods. It highlights that modification of the texture/taste of food based on food structure design opens up the possibility for the development of food products that can be applied in the management of health.