Impact of oil type on the location, partition and chemical stability of resveratrol in oil-in-water emulsions stabilized by whey protein isolate plus gum Arabic

The effects of different types of polysaccharides on the structure and physical properties of W/O/W emulsions under varying pH conditions

BACKGROUND

Biopolymer based water-in-oil-in-water double (W1/O/W2) emulsion systems comprise a complex emulsion system that might be affected by several factors and the status at multiple phases. The present study investigated the physicochemical properties of W1/O/W2 double emulsions with inner W1 phase incorporated with various polysaccharides and the outer phase stabilized by whey protein isolate (WPI). Six different polysaccharides were selected as co-emulsifiers in the inner phase, and their effects on morphology, droplet size, zeta potential and rheology properties were evaluated. Furthermore, the impact of WPI/polysaccharide concentration and pH on the physicochemical properties and storage stability of the emulsions was compared.

RESULTS

Emulsions with an inner phase incorporated with xanthan gum and carrageenan exhibited better stability than others. Increasing the concentration of WPI enhanced the overall stability of the double emulsion, although it compromised the integrity of the internal W1/O interface. On the other hand, a 1.0% concentration of polysaccharide, specifically when carrageenan is used, slowed down droplet floating and coagulation. An acidic external aqueous phase (pH 4) led to larger and more uniform particle size distributions, as well as enhanced stability. The lower pH decreased the viscosity and delayed molecular exchange in the oil phase, thereby preserving the structure of the double emulsion.

CONCLUSION

These findings contribute to a better understanding of the factors influencing the stability and properties of W1/O/W2 double emulsions with addition of anionic polysaccharides in the inner water phase. © 2024 Society of Chemical Industry.

Hyaluronic acid-poly(glyceryl)10-stearate nanoemulsion for co-delivery of fish oil and resveratrol: Enhancing bioaccessibility and antioxidant potency

Hyaluronic acid (HA), an endogenous polysaccharide comprising alternating D-glucuronic acid and N-acetylglucosamine units, is renowned for its high hydrophilicity, biocompatibility, and biodegradability. These attributes have rendered HA invaluable across medical and drug delivery fields. HA can be altered through physical, chemical, or enzymatic methods to improve the properties of the modified substances. In this work, we synthesized a derivative via the esterification of HA with poly(glyceryl)10-stearate (PG10-C18), designated as HA-PG10-C18. This novel derivative was employed to fabricate a nano co-delivery system (HA-PG10-C18@Res-NE) for fish oil and resveratrol (Res), aiming to enhance their stability and bioaccessibility. An exhaustive investigation of HA-PG10-C18@Res-NE revealed that the HA-modified system displayed superior physicochemical stability, notably in withstanding oxidation and neutralizing free radicals. Moreover, in vitro simulated digestion underscored the system's enhanced bioaccessibility of Res and more efficient release of free fatty acids. These outcomes underscore the strategic advantage of HA in modifying PG10-C18 for nanoemulsion formulation. Consequently, HA-PG10-C18 stands as a promising emulsifier for encapsulating lipophilic bioactives in functional foods, nutraceuticals, and pharmaceuticals.

Emulsification and stabilisation technologies used for the inclusion of lipophilic functional ingredients in food systems

Food industry is increasingly using functional ingredients to improve the food product quality. Lipid-containing functional ingredients are important sources of nutrients. This review examines the current state of emulsification and stabilisation technologies for incorporating lipophilic functional ingredients into food systems. Lipophilic functional ingredients, such as omega-3 fatty acids, carotenoids, and fat-soluble vitamins, offer numerous health benefits but present challenges due to their limited solubility in water-based food matrices. Emulsification techniques enable the dispersion of these ingredients in aqueous environments, facilitating their inclusion in a variety of food products. This review highlights recent advances in food emulsion formulation, emulsification methods and stabilisation techniques which, together, improve the stability and bioavailability of lipophilic compounds. The role of various emulsifiers, stabilizers, and encapsulation materials in enhancing the functionality of these ingredients is also explored. Furthermore, the review discusses different stabilisation techniques which can yield in emulsion in a solid or liquid state. By providing a comprehensive overview of current technologies, this review aims to guide future research and application in the development of functional foods enriched with lipophilic ingredients.

Encapsulation of resveratrol within size-controlled nanoliposomes: Impact on solubility, stability, cellular permeability, and oral bioavailability

This study examined the influence of the nanoliposomes (LPs) particle size on the solubility, antioxidant stability, in vitro release profile, Caco-2 cellular transport activity, cellular antioxidant activity, and in vivo oral bioavailability of resveratrol (RSV). LPs with sizes of 300, 150, and 75 nm were prepared using the thin-lipid film hydration method, followed by ultrasonication for 0, 2, and 10 min, respectively. Formulating small LPs (< 100 nm) was effective to enhance the solubility, in vitro release profile, cellular permeability, and cellular antioxidant activity of RSV. A similar pattern was observed for in vivo oral bioavailability. However, the size reduction of RSV-loaded LPs did not promote the antioxidant stability of RSV, owing to their large surface area used to interact with harsh environments. This study provides the better understanding of the appropriate particle size range of LPs to improve their in vitro and in vivo performances of RSV as an effective carrier for oral administration.

A comprehensive review of protein-based carriers with simple structures for the co-encapsulation of bioactive agents

The rational design and fabrication of edible codelivery carriers are important to develop functional foods fortified with a plurality of bioactive agents, which may produce synergistic effects in increasing bioactivity and functionality to target specific health benefits. Food proteins possess considerable functional attributes that make them suitable for the delivery of a single bioactive agent in a wide range of platforms. Among the different types of protein-based carriers, protein-ligand nanocomplexes, micro/nanoparticles, and oil-in-water (O/W) emulsions have increasingly attracted attention in the codelivery of multiple bioactive agents, due to the simple and convenient preparation procedure, high stability, matrix compatibility, and dosage flexibility. However, the successful codelivery of bioactive agents with diverse physicochemical properties by using these simple-structure carriers is a daunting task. In this review, some effective strategies such as combined functional properties of proteins, self-assembly, composite, layer-by-layer, and interfacial engineering are introduced to redesign the carrier structure and explore the encapsulation of multiple bioactive agents. It then highlights success stories and challenges in the co-encapsulation of multiple bioactive agents within protein-based carriers with a simple structure. The partition, protection, and release of bioactive agents in these protein-based codelivery carriers are considered and discussed. Finally, safety and application as well as challenges of co-encapsulated bioactive agents in the food industry are also discussed. This work provides a state-of-the-art overview of protein-based particles and O/W emulsions in co-encapsulating bioactive agents, which is essential for the design and development of novel functional foods containing multiple bioactive agents.

Co-encapsulation of resveratrol in fish oil microcapsules optimally stabilized by enzyme-crosslinked whey protein with gum Arabic

O/W emulsion and its spray-dried microcapsule contain the oil phase and the protein matrix, providing the potential to co-encapsulate different antioxidants. However, antioxidants were generally encapsulated in the oil phase of microcapsule, its protein matrix is rarely used. It is first to prove the possibility to encapsulate resveratrol in the emulsified oil droplets at high wall/core ratios. The optimal microcapsule with 1.75% surface oil was fabricated with 15% transglutaminase-crosslinked WPI (TGase-WPI) and 5% gum Arabic (GA). Resveratrol mainly located in the protein matrix of initial emulsion and reconstituted microcapsule. The effects of TGase-WPI/GA microcapsule and resveratrol co-encapsulation on DHA/EPA and lipid hydroperoxides/TBARS were different. The interfacial protein, the partition of resveratrol in the emulsified oil droplets and its storage stability and inhibitory effect on size change of reconstituted microcapsules increased as the polyphenol increased. These results expand the potential use of spray-dried microcapsules as co-encapsulation carriers.

Effect of Oil Type on Spatial Partition of Resveratrol in the Aqueous Phase, the Protein Interface and the Oil Phase of O/W Emulsions Stabilized by Whey Protein and Caseinate

Oil-in-water emulsions contain the inner oil phase, the protein membrane at the interface and the aqueous phase. In this study, the spatial partition of resveratrol was investigated in sunflower oil, fish oil, medium-chain triglyceride (MCT) and peppermint oil emulsions stabilized by native whey protein isolate (WPI), heat-denatured WPI and sodium caseinate. Resveratrol was added in the aqueous phase of emulsions and its partition was analyzed in term of resveratrol solubility in bulk oil and in the aqueous phase of protein, protein concentration and interfacial protein. The final concentrations of resveratrol in the aqueous phase were basically greater than those in the oil phase of fish oil, sunflower oil and MCT oil emulsions, while the final concentrations of resveratrol in the oil phase were greater than those in the aqueous phase of peppermint oil emulsions. The difference in the interfacial partition of resveratrol and proteins increased as the polyphenol solubility in bulk oil increased. Resveratrol solubility in the oil phase drove its transfer from the aqueous phase into the oil phase in all emulsions, except that the interfacial protein also contributed to the transfer in fish oil emulsions. The oil–water interface provided the microenvironment for the enrichment of resveratrol by proteins.

Fortification by design: A rational approach to designing vitamin D delivery systems for foods and beverages

Over the past few decades, vitamin D deficiency has been recognized as a serious global public health challenge. The World Health Organization has recommended fortification of foods with vitamin D, but this is often challenging because of its low water solubility, poor chemical stability, and low bioavailability. Studies have shown that these challenges can be overcome by encapsulating vitamin D within well-designed delivery systems containing nanoscale or microscale particles. The characteristics of these particles, such as their composition, size, structure, interfacial properties, and charge, can be controlled to attain desired functionality for specific applications. Recently, there has been great interest in the design, production, and application of vitamin-D loaded delivery systems. Many of the delivery systems reported in the literature are unsuitable for widespread application due to the complexity and high costs of the processing operations required to fabricate them, or because they are incompatible with food matrices. In this article, the concept of "fortification by design" is introduced, which involves a systematic approach to the design, production, and testing of colloidal delivery systems for the encapsulation and fortification of oil-soluble vitamins, using vitamin D as a model. Initially, the challenges associated with the incorporation of vitamin D into foods and beverages are reviewed. The fortification by design concept is then described, which involves several steps: (i) selection of appropriate vitamin D form; (ii) selection of appropriate food matrix; (iii) identification of appropriate delivery system; (iv) identification of appropriate production method; (vii) establishment of appropriate testing procedures; and (viii) system optimization.

Interaction research of resveratrol and phosvitin based on fluorescence spectroscopy and molecular docking analysis

Phosvitin (PV) is the main phosphoprotein in egg yolk, with the highest degree of phosphorylation known in nature. The PV and resveratrol (Res) can form a complex, thus effectively improve the solubility of Res. In this work, the interaction between Res and PV was investigated by the fluorescence spectroscopy and molecular docking. The fluorescence emission intensity of PV became weak along with a red shift when it interacted with Res and the antioxidant activity was enhanced. The quenching constants of the interaction systems were 1.12×10⁴  M^-1 and 9.40×10³  M^-1 at 25°C and 35°C, respectively, which indicated the presence of static quenching phenomena between them. The binding constant was 1.80×10⁴  M^-1 , and the number of corresponding binding sites was approximately equal to one. The thermodynamic results revealed the combination was spontaneous, and the change of enthalpy and entropy was ∆H = 53.50 kJ/mol, ∆S = 261.00 J/mol·K, respectively. It indicated that the interaction forces between Res and PV were mainly hydrophobic interaction and hydrogen bonding. Molecular docking showed the binding mode, which was consistent with the experiment results. The research on the interaction between Res and PV provided theoretical guidance for the application of Res in food. PRACTICAL APPLICATION: PV is the most highly phosphorylated protein in nature and has pro-calcium absorption effects. Res is a polyphenol with strong antioxidant and anti-inflammatory activity, but its poor solubility limits its application. In this study, the solubility of Res was considerably enhanced by compounding Res and PV, and the antioxidant activity of Res was well retained. It increases the value of Res in food and other applications and opens up new possibilities for processing and utilization of PV.

A review on octenyl succinic anhydride modified starch-based Pickering-emulsion: Instabilities and ingredients interactions

Pickering emulsions endow attractive features and a wide versatility in both food and nonfood fields. In the last decades, a noticeable interest has emerged toward the use of octenyl succinic anhydride (OSA)-starch to improve the long-term stability in such systems. In this review, instabilities were pointed out, where a new kinetic equilibrium was observed in Pickering emulsions assigned to migration and size variations of particles. These features were monitored using rheological measurements to understand microstructure and droplets mobility. The elastic modulus (G'), the viscous modulus (G″), and tan(δ) values were attributed to the transition from solid to fluid and assigned to the instability of the formulation regardless of the type of the system configuration. The novelties in using OSA-modified starch, were also exposed. The chemical modification of starch decreased creaming for months. Interaction between OSA-modified starches and some ionic components (potassium, magnesium, and calcium) as well as hydrocolloids and proteins reduced creaming and coalescence due to dense interfacial film. Furthermore, the key parameters (oil fraction, fatty acids composition, oxidative stress oil polarity, and oil viscosity) that govern oil phase in Pickering emulsion, were analyzed. These parameters were found to be positively correlated to the stability of Pickering emulsions.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Effects of isolation conditions on structural and functional properties of the seed gum from Chinese quince (Chaenomeles sinensis)

Chinese quince seed gum (CQSG) extracted under water-, alkali- and acid- conditions at 25, 50, and 80 °C, were evaluated in terms of yield, monosaccharide composition, molecular distribution, thermal gravimetry, emulsifying stability, rheological properties, and free radical scavenging ability. The results showed that the yield of CQSG increased to 3.9% after water extraction at 80 °C. Alkali and acid treatments promoted the conversion of neutral sugars to the uronic acid branch. Regardless of the extraction temperature, the xylose chain was the main component (35%-40%); however, a reduction was observed as the extraction temperature increased to 80 °C. All CQSG solutions extracted under these isolation conditions exhibited non-Newtonian rheological behavior. Compared to water-extracted samples, the alkali-extracted samples showed the worst thermal stability, while the acid-treated samples showed the worst emulsifying stability. This study provides theoretical support for the potential application of CQSG polysaccharides in the food and pharmaceutical industries.

Exploring water in oil emulsions simultaneously stabilized by solid hydrophobic silica nanospheres and hydrophilic soft PNIPAM microgel

A general drawback of microgels is that they do not stabilize water-in-oil (w/o) emulsions of non-polar oils. Simultaneous stabilization with solid hydrophobic nanoparticles and soft hydrophilic microgels overcomes this problem. For a fundamental understanding of this synergistic effect the use of well defined particle systems is crucial. Therefore, the present study investigates the stabilization of water droplets in a highly non-polar oil phase using temperature responsive, soft and hydrophilic PNIPAM microgel particles (MGs) and solid and hydrophobic silica nanospheres (SNs) simultaneously. The SNs are about 20 times smaller than the MGs. In a multiscale approach the resulting emulsions are studied from the nanoscale particle properties over microscale droplet sizes to macroscopic observations. The synergy of the particles allows the stabilization of water-in-oil (w/o) emulsions, which was not possible with MGs alone, and offers a larger internal interface than the stabilization with SNs alone. Furthermore, the incorporation of hydrophilic MGs into a hydrophobic particle layer accelerates the emulsions sedimentation speed. Nevertheless, the droplets are still sufficiently protected against coalescence even in the sediment and can be redispersed by gentle shaking. Based on droplet size measurements and cryo-SEM studies we elaborate a model, which explains the found phenomena.

CaCO3 nanoparticles incorporated with KAE to enable amplified calcium overload cancer therapy

Calcium overload therapy has attracted widespread attention in oncological field, whereas its efficacy has been limited due to insufficient calcium ions in tumor site and poor efficiency of calcium entering tumor, resulting in dissatisfied therapeutic effect. Kaempferol-3-O-rutinoside (KAE), a biosafe flavone with excellent anti-cancer ability, can effectively disrupt calcium homeostasis regulation and facilitate calcium influx, while calcium carbonate (CaCO₃) serves as an ideal calcium ions supplier. Inspired by these concepts, KAE loaded into CaCO₃ nanoparticles and incorporated with the cancer cell membrane (M) for synergistic tumor therapy. In this therapeutic platform (M@CaCO₃@KAE), membrane coating ensures targeted delivery of CaCO₃@KAE. Upon reaching tumor, CaCO₃@KAE specifically responds to tumor microenvironment, consequently releases KAE and calcium ions. KAE effectively breaks the calcium balance, while calcium ions remarkably aggravate and magnify KAE-mediated calcium overload. Accordingly, mitochondrial structure and functions are destructed, causing cytoskeleton collapse and oxidative stress, leading to cancerous cellular apoptosis. With the combined and cascaded efficacy, considerable in vitro and in vivo tumor inhibition was achieved by M@CaCO₃@KAE. This study provides an alternative nano-system, acting as a biomimetic calcium bomb, to ensure targeted, synergistic, efficient and biosafe calcium overload tumor therapy.

Partition and stability of folic acid and caffeic acid in hollow zein particles coated with chitosan

The carriers for hydrophobic bioactives have been extensively studied, while those for hydrophilic bioactives are still challenging. The partition of bioactives in the particles depends greatly on their solubility, interaction with carrier materials, as well as structure of carriers. In this study, chitosan-coated hollow zein particles using calcium phosphate as a sacrificing template (CS-HZ) were fabricated to co-encapsulate folic acid (FA) and caffeic acid (CA). Partition, photostability, and antioxidant capacity of bioactive compounds were also studied. The size, polydispersity index and ζ-potential of optimized CS-HZ were 176.3 nm, 0.14 and +39.3 mV, respectively, indicating their small and uniform dimension with excellent colloidal stability. FA interacted with chitosan to form complexes and then coated on the zein particles where CA was encapsulated. After co-encapsulation in CS-HZ, the photostability of both FA and CA was improved in comparison with encapsulation of single compound, with 85% of FA remaining after 240 min of UVA irradiation, and 90% of CA remaining after 80 min. Antioxidant activity of CA decreased upon encapsulation, but significantly increased after irradiation. Findings in this study shed some light on the design of carriers for co-delivery of hydrophilic compounds in acidic condition.

Resveratrol loaded Pickering emulsions stabilized by OSA modified rice starch granules

Resveratrol is a photosensitive, bioactive molecule which has received increasing research interest during the past decade for its antioxidant properties. However, it has low solubility in water or common triglyceride oils. Resveratrol solubilization in oil can only be achieved in essential oils, such as flavour oils, but the stability of emulsions produced with this type of oils is low as they are prone to creaming phenomena and Oswald ripening. In this study, resveratrol was first dissolved in orange oil which was mixed into a medium-chain triglyceride (Miglyol) at different ratios and used as the internal phase of oil-in-water emulsions (O/W). The emulsions were stabilized by octenyl succinic anhydride (OSA) modified rice starch granules using two different ratios of starch particle:oil to study the influence of interfacial coverage on the final emulsion droplet size and emulsion stability. The results of this study indicated that stable Pickering emulsions could be prepared using OSA-modified rice starch granules even at partial coverage conditions. Emulsions prepared at an oil fraction of 0.5 using 30% v/v mixture of orange oil in Miglyol as the dispersed phase seemed to be an appropriate resveratrol carrier system, obtaining encapsulation efficiency values close to 90% which results in emulsions with a resveratrol concentration of 8.45 mg/L. Hence, the emulsions prepared are suitable for food fortification applications.