Effect of interfacial compositions on the physical properties of alginate-based emulsion gels and chemical stability of co-encapsulated bioactives

Can natural pigments in different emulgel phases stabilize each other against UV radiation? Anthocyanin and β-carotene co-loaded in an emulgel based on soy protein isolate-gellan gum conjugates

Despite poor stability of natural pigments against degradation, using these colorants have attracted great interest due to their various beneficial effect on human health. Accordingly, in the present study, an emulgel based on soy protein isolate-gellan gum conjugate was fabricated via Millard reaction. Then, the effectiveness of emulgel on improving the stability of anthocyanin (ACN) and β-carotene (BC) with different loading concentration (5, 10, and 15 mg/mL) against UV-C irradiation was investigated. Degradation kinetic results exhibited the higher stability of ACN upon co-loading with BC, as the half-life of ACN in free aqueous solution, loaded and co-loaded in emulgel was found to be 0.698, 2.648 and 3.164 days, respectively. The emulgel effectively improved the stability of BC, as well, and no degradation was observed during storage time. The release studies of the pigments showed Fickian diffusion mechanism. Furthermore, their release patterns were found to be independent and differences among the release from individual or simultaneous loaded system were rather small. Overall, our findings elucidated the promising potential of co-loading within emulgel as a safe delivery system in stability enhancement of natural pigments.

Influence of furcellaran and safflower oil concentration on the properties of model emulgel systems

The aim of this study was to investigate the effect of varying concentrations of furcellaran (FUR) and safflower (Carthamus Tinctorius) oil on the functional properties of emulgels as potential carriers of bioactive substances. The textural, mechanical, thermal and structural properties of twenty different formulations were characterised. The pH stability and zeta-potential of the emulgels was also examined. It was found clear correlation between gelling agent and oil fraction content and investigated properties. The hardness, strength, thermal stability expressed as melting point of the investigated systems increased with increasing concentration of the furcellaran and decreasing proportion of safflower oil, which indicated a significant weakening of the structure as a result of the addition of the oil fraction. Stored under refrigeration, emulgels appeared to be relatively stable showing a slight decrease in pH values after 7 days. Swelling ratio (SW) of emulgels increased with increasing both, polysaccharide and oil content, in emulgels. Based on the microstructure analyses, it can also be concluded that only part of the added safflower oil chemically bound to the functional groups of the polysaccharide, while the vast majority of it was only physically immobilized in the furcellaran matrix. Colour of furcellaran - safflower oil emulsion gels depended largely on the amount of oil fraction. The presented research demonstrating the wide spectrum of functional properties of polysaccharide-oil systems is a first step to developing a carrier composition for lipophilic compounds at further stages of research.

Hydrogel delivery systems of functional substances for precision nutrition

Hydrogel delivery systems based on polysaccharides and proteins have the ability to protect functional substances from chemical degradation, control/target release, and increase bioavailability. This chapter summarizes the recent progress in the utilization of hydrogel delivery systems for nutritional interventions. Various hydrogel delivery systems as well as their preparation, structure, and properties are given. The applications for the encapsulation, protection, and controlled delivery of functional substances are described. We also discuss their potential and challenges in managing chronic diseases such as inflammatory bowel disease, obesity, liver disease, and cancer, aiming at providing theoretical references for exploring novel hydrogel delivery systems and their practical prospects in precise nutritional interventions.

Fabrication of curcumin-loaded oleogels using camellia oil bodies and gum arabic/chitosan coatings for controlled release applications

This study has explored the potential of plant-derived oil bodies (OBs)-based oleogels as novel drug delivery systems for in vitro release under simulated physiological conditions. To obtain stable OBs-based oleogels, gum arabic (GA) and chitosan (CH) were coated onto the curcumin-loaded OBs using an electrostatic deposition technique, followed by 2,3,4-trihydroxybenzaldehyde (TB) induced Schiff-base cross-linking. Microstructural analyses indicated successful encapsulation of curcumin into the hydrophobic domain of the OBs through a pH-driven method combined with ultrasound treatment. The curcumin encapsulation efficiency of OBs increased up to 83.65 % and 92.18 % when GA and GA-CH coatings were applied, respectively, compared to uncoated OBs (63.47 %). In addition, GA-CH coatings retained the structural integrity of oleogel droplets with superior oil-holding capacity (99.07 %), while TB addition induced interconnected 3D-network structures with excellent gel strength (≥4.8 × 105 Pa) and thermal stability (≥80 °C). GA-CH coated oleogels appeared to provide the best protection for loaded bioactive against UV irradiation and high temperature-induced degradation during long-term storage. The combination of biopolymer coatings and TB-induced Schiff-base cross-linking synergistically hindered the simulated gastric degradability of oleogels, releasing only 23.35 %, 12.46 % and 7.19 % of curcumin by GA, GA-CH and GA-CH-TB stabilized oleogels, respectively, while also resulting in sustained release effects during intestinal conditions.

Mechanism underlying joint loading and controlled release of β-carotene and curcumin by octenylsuccinated Gastrodia elata starch aggregates

This study aimed to fabricate a novel codelivery system to simultaneously load β-carotene and curcumin in a controlled and synergistic manner. We hypothesized that the aggregates of octenylsuccinated Gastrodia elata starch (OSGES) could efficiently load and control the release of β-carotene and curcumin in combination. Mechanisms underlying the self-assembly of OSGES, coloading, and corelease of β-carotene and curcumin by relevant aggregates were studied. The OSGES could form aggregates with a size of 120.2 nm containing hydrophobic domains surrounded by hydrophilic domains. For coloading, the increased solubilities were attributed to favorable interactions between β-carotene and curcumin as well as interactions with octenyl and starch moieties via hydrophobic and hydrogen-bond interactions, respectively. The β-carotene and curcumin molecules occupied the interior and periphery of hydrophobic domains of OSGES aggregates, respectively, and they did not exist in isolation but interacted with each other. The β-carotene and curcumin combination-loaded OSGES aggregates with a size of 310.5 nm presented a more compact structure than β-carotene-only and curcumin-only loaded OSGES aggregates with sizes of 463.5 and 202.9 nm respectively, suggesting that a transition from a loose cluster to a compact cluster was accompanied by coloading. During in vitro digestion, the joint effect of β-carotene and curcumin prolonged their release and increased their bioaccessibility due to competition between favorable hydrophobic and hydrogen-bond interactions and the unfavorable structure erosion and relaxation of the loaded aggregates. Therefore, OSGES aggregates were designed for the codelivery of β-carotene and curcumin, indicating their potential to be applied in functional foods and dietary supplements.

Alginate Gel-Based Carriers for Encapsulation of Carotenoids: On Challenges and Applications

Sodium alginate is one of the most interesting and the most investigated and applied biopolymers due to its advantageous properties. Among them, easy, simple, mild, rapid, non-toxic gelation by divalent cations is the most important. In addition, it is abundant, low-cost, eco-friendly, bio-compatible, bio-adhesive, biodegradable, stable, etc. All those properties were systematically considered within this review. Carotenoids are functional components in the human diet with plenty of health benefits. However, their sensitivity to environmental and process stresses, chemical instability, easy oxidation, low water solubility, and bioavailability limit their food and pharmaceutical applications. Encapsulation may help in overcoming these limitations and within this review, the role of alginate-based encapsulation systems in improving the stability and bioavailability of carotenoids is explored. It may be concluded that all alginate-based systems increase carotenoid stability, but only those of micro- and nano-size, as well as emulsion-based, may improve their low bioaccessibility. In addition, the incorporation of other biopolymers may further improve encapsulation system properties. Furthermore, the main techniques for evaluating the encapsulation are briefly considered. This review critically and profoundly explains the role of alginates in improving the encapsulation process of carotenoids, suggesting the best alternatives for those systems. Moreover, it provides a comprehensive cover of recent advances in this field.

Impact of the droplet size of canola oil-in-water emulsions on the rheology and sensory acceptability of reduced-milk fat stirred yogurt

A coarse canola oil-in-water (O/W) emulsion (dispersed mass fraction 0.1) was prepared by adding oil to whey protein hydrolysate (WPH)-citric pectin (CP) soluble complex (1% total biopolymer weight; WPH to CP mass ratio 6:1; pH 4.25) aqueous phase using a high shear homogenizer (4000 rpm, 2 min). The coarse O/W emulsion was further homogenized to obtain emulsions (Ex) with different mean droplet sizes (4000, 3000, 120 and 60 nm). A full-fat yogurt (YC; 26 ± 0.3 g milk fat L-1) was prepared from reconstituted whole milk powder (WMP, 3% milk fat) and skim milk powder (SMP, 0.01% milk fat). Reduced-milk fat yogurt (YEx 13 ± 0.3 g milk fat L-1) variations were prepared from WMP + SMP + Ex, where Ex substituted 50% of the milk-fat contained in YC. The viscosity and viscoelastic moduli were lower for YEx than for YC; the effect was more pronounced for E60 and E120. Aroma was non-significantly different between YC and YEx. A multivariate analysis showed that YEx overall acceptability was linked to taste and after taste attributes and to the viscosity perceived in mouth. The loss modulus showed anti-correlation directionality with the overall acceptance. The smaller mean droplet sized YEx exhibited the highest overall acceptability.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05573-3.

Potential Food and Nutraceutical Applications of Alginate: A Review

Alginate is an acidic polysaccharide mainly extracted from kelp or sargassum, which comprises 40% of the dry weight of algae. It is a linear polymer consisting of β-D-mannuronic acid (M) and α-L-guluronic acid (G) with 1,4-glycosidic linkages, possessing various applications in the food and nutraceutical industries due to its unique physicochemical properties and health benefits. Additionally, alginate is able to form a gel matrix in the presence of Ca²⁺ ions. Alginate properties also affect its gelation, including its structure and experimental conditions such as pH, temperature, crosslinker concentration, residence time and ionic strength. These features of this polysaccharide have been widely used in the food industry, including in food gels, controlled-release systems and film packaging. This review comprehensively covers the analysis of alginate and discussed the potential applications of alginate in the food industry and nutraceuticals.

Comparison of Oxidative and Physical Stabilities of Conjugated Linoleic Acid Emulsions Stabilized by Glycosylated Whey Protein Hydrolysates via Two Pathways

The objective of the research was to analyze and compare the oxidative and physical stabilities of conjugated linoleic acid (CLA) emulsions stabilized by two glycosylated hydrolysates (GPP-A and GPP-B) that were formed via two different pathways. This study showed that GPP-A exhibited higher browning intensity and DPPH radical scavenging ability in comparison with GPP-B. Moreover, the CLA emulsion formed by GPP-A exhibited a lower creaming index, average particle size, primary and secondary oxidative products, in comparison with GPP-B-loaded emulsion. However, the GPP-A-loaded emulsion showed a higher absolute potential and fraction of interfacial adsorption than that of the CLA emulsion formed by GPP-B. Therefore, the CLA emulsion formed by GPP-A exhibited stronger stabilities in comparison with the GPP-B-loaded emulsion. These results suggested that GPP-A showed an emulsification-based delivery system for embedding CLA to avoid the loss of biological activities. Additionally, the development of CLA emulsions could exert its physiological functions and prevent its oxidation.

Preparation of zein-lecithin-EGCG complex nanoparticles stabilized peppermint oil emulsions: Physicochemical properties, stability and intelligent sensory analysis

Peppermint oil emulsions were prepared by using zein-lecithin-EGCG (Z-L/E) complex nanoparticles as emulsifiers. The preparation conditions of emulsions were optimized via measuring the particle size, surface tension and stability of emulsions, and peppermint oil of 3% (particle size = 375 nm, polydispersity index (PDI) = 0.45), the zein:lecithin ratio of 4:1 (w/w) (particle size = 396 nm), and the zein:EGCG ratio of 10:1 (w/w) (surface tension = 47.32 N/m) was the optimal condition. The rapid stability analysis showed that the instability mechanism of emulsions was ascribed to creaming and stratification, and the stability mechanism of emulsions was explored, indicating that the complex nanoparticles adsorbed on the surface of oil droplets to give Pickering emulsions. Electronic tongue experiments showed that the Z-E/L_4:1 stabilized emulsion was distinguished from the other three samples due to its good stability. The electronic nose experiment could distinguish the emulsions with different droplet sizes.

New insights into food O/W emulsion gels: Strategies of reinforcing mechanical properties and outlook of being applied to food 3D printing

3D printing technology has been widely used in food processing with its advantages of customized food design, personalized nutrition design, and simplified food supply chain. Food emulsion gels have application value and prospects in food 3D printing due to their promising properties, including biodegradability, biocompatibility, as well as dual characteristics of emulsions and biopolymer gels. Food emulsion gels with appropriate mechanical properties, as a new type of food inks, expand the types and functions of the inks. However, food emulsion gels without adequate reinforced mechanical properties may suffer from defects in shape, texture, mouthfeel, and functionality during 3D printing and subsequent applications. Therefore, it is necessary to summarize the strategies to improve the mechanical properties of food emulsion gels. According to the methods of characterizing the mechanical properties of emulsion gels, this article summarizes four strategies for improving the mechanical properties of emulsion gels through two ways: inside-out (reinforcement of interface and reinforcement of cross-linking) and outside-in (physical approaches and environmental regulations), as well as their basic mechanisms. The application status and future research trends of emulsion gels in food 3D printing are finally discussed.