Enhancing the resistance of anthocyanins to environmental stress by constructing ovalbumin-propylene glycol alginate nanocarriers with novel configurations

Acid-Heat-Induced Fabrication of Nisin-Loaded Egg White Protein Nanoparticles: Enhanced Structural and Antibacterial Stability

As a natural cationic peptide, Nisin is capable of widely inhibiting the growth of Gram-positive bacteria. However, it also has drawbacks such as its antimicrobial activity being susceptible to environmental factors. Nano-encapsulation can improve the defects of nisin in food applications. In this study, nisin-loaded egg white protein nanoparticles (AH-NEn) were prepared in fixed ultrasound-mediated under pH 3.0 and 90 °C. Compared with the controls, AH-NEn exhibited smaller particle size (112.5 ± 2.85 nm), smaller PDI (0.25 ± 0.01), larger Zeta potential (24 ± 1.18 mV), and higher encapsulation efficiency (91.82%) and loading capacity (45.91%). The turbidity and Fourier transform infrared spectroscopy (FTIR) results indicated that there are other non-covalent bonding interactions between the molecules of AH-NEn besides the electrostatic forces, which accounts for the fact that it is structurally more stable than the controls. In addition, by the results of fluorescence intensity, differential scanning calorimetry (DSC), and X-ray diffraction (XRD), it was shown that thermal induction could improve the solubility, heat resistance, and encapsulation of nisin in the samples. In terms of antimicrobial function, acid-heat induction did not recede the antimicrobial activity of nisin encapsulated in egg white protein (EWP). Compared with free nisin, the loss rate of bactericidal activity of AH-NEn was reduced by 75.0% and 14.0% following treatment with trypsin or a thermal treatment at 90 °C for 30 min, respectively.

Development of Novel Nanocarriers by Ultrasound and Ethanol-Assisted Soy Protein Isolate: Enhancing the Resistance of Lutein to Environmental Stress

The aim of this work was to investigate the effects of the processing sequence of ultrasound and ethanol on the physicochemical properties of soy protein isolate (SPI), which were further evaluated for the morphology and stability of SPI-lutein coassembled nanoparticles. The results showed that the sequence of ultrasound followed by ethanol treatment was the optimal one. The samples were subjected to ultrasonication followed by subunit disassembly and reassembly induced by 40% (v/v) ethanol, with the resulting molecular unfolding and subsequent aggregation being attributed to intramolecular hydrogen bonds. The recombined nanoparticles had smaller particle size (142.43 ± 2.91 nm) and turbidity (0.16 ± 0.01), and the exposure of more hydrophobic groups (H0 = 6221.00 ± 130.20) induced a shift of SPI structure toward a more ordered direction. The homogeneous and stable particle provided excellent stability for the loading of lutein. The bioaccessibility (from 25.48 ± 2.35 to 65.85 ± 1.78%) and release rate of lutein were modulated in gastrointestinal digestion experiments. Our discoveries provide a new perspective for the development of combined physicochemical modification of proteins as nanocarriers in functional foods.

Regulation of ovalbumin allergenicity and structure-activity relationship analysis based on pulsed electric field technology

The study focused on the regulation of ovalbumin (OVA) allergenicity using pulsed electric field (PEF) technology and examined the structure-activity link. Following PEF treatment, the ability of OVA to bind to IgE and IgG1 at 6 kHz was inhibited by 30.41 %. According to the microstructure, PEF caused cracks on the OVA surface. Spectral analysis revealed a blue shift in the amide I band and a decrease in α-helix and β-sheet content indicating that the structure of OVA was unfolded. The disulfide bond conformation was transformed and the structure tended to be disordered. The increased fluorescence intensity indicated that tryptophan and tyrosine were exposed which led an increase in hydrophobicity. In addition, the results of molecular dynamics (MD) simulations confirmed that the stability of OVA was reduced after PEF, which was related to the reduction of hydrogen bonding and the sharp fluctuation of aspartic acid. Therefore, PEF treatment induced the exposure of hydrophobic amino acids and the transformation of disulfide bond configuration which in turn masked or destroyed allergenic epitopes, and ultimately inhibited OVA allergenicity. This study provided insightful information for the production of hypoallergenic eggs and promoted the use of PEF techniques in the food field.

Material Breakthroughs in Smart Food Monitoring: Intelligent Packaging and On-Site Testing Technologies for Spoilage and Contamination Detection

Despite extensive commercial and regulatory interventions, food spoilage and contamination continue to impose massive ramifications on human health and the global economy. Recognizing that such issues will be significantly eliminated by the accurate and timely monitoring of food quality markers, smart food sensors have garnered significant interest as platforms for both real-time, in-package food monitoring and on-site commercial testing. In both cases, the sensitivity, stability, and efficiency of the developed sensors are largely informed by underlying material design, driving focus toward the creation of advanced materials optimized for such applications. Herein, a comprehensive review of emerging intelligent materials and sensors developed in this space is provided, through the lens of three key food quality markers - biogenic amines, pH, and pathogenic microbes. Each sensing platform is presented with targeted consideration toward the contributions of the underlying metallic or polymeric substrate to the sensing mechanism and detection performance. Further, the real-world applicability of presented works is considered with respect to their capabilities, regulatory adherence, and commercial potential. Finally, a situational assessment of the current state of intelligent food monitoring technologies is provided, discussing material-centric strategies to address their existing limitations, regulatory concerns, and commercial considerations.

Comparison of milk protein concentrate, micellar casein, and whey protein isolate in loading astaxanthin after the treatment of ultrasound-assisted pH shifting

Milk proteins can be used as encapsulation walls to increase the bioavailability of active compounds because they can bind hydrophobic, hydrophilic, and charged compounds. The objective of this study was to investigate the effects of astaxanthin (ASTA) encapsulation and the functional properties of milk protein and ASTA nanocomposites by an ultrasound-assisted pH-shifting treatment of different milk proteins, including milk protein concentrate (MPC), micellar casein (MCC), and whey protein isolate (WPI). The ultrasound-assisted pH-shifting treatment of milk protein helped to improve the encapsulation rate of ASTA. Therein, MCC showed great improvement of encapsulating ASTA after co-treatment with the raised encapsulated rate of 5.11%, followed by WPI and MPC. Furthermore, the nanocomposites of ASTA with milk protein exhibit improved bioavailability, antioxidant capacity, and storage stability. By comparison, MCC-encapsulated ASTA has the best storage stability, followed by MPC, and WPI-encapsulated ASTA has the least stability over a 28-d storage period. The results of intrinsic fluorescence and surface hydrophobicity showed that milk protein underwent fluorescence quenching after binding to ASTA, which was due to the hydrophobic sites of the protein being occupied by ASTA. In general, the nanocomposites of milk protein and ASTA fabricated by using an ultrasound-assisted pH-shifting treatment have the potential to be better nano-delivery systems for ASTA in functional foods, especially MCC, which showed excellent performance in encapsulation after treatment technique.

Complexes of glycated casein and carboxymethyl cellulose enhance stability and control release of anthocyanins

To improve the stability and sustained-release property of anthocyanins (ACNs), casein (CA) - dextran (DEX) glycated conjugates (UGCA) and carboxymethyl cellulose (CMC) were used to prepare ACNs-loaded binary and ternary complexes. The ACNs-loaded binary complexes (ACNs-UGCA) and ternary complexes (ACNs-UGCA-CMC) achieved by 8 min' ultrasonic treatment with 40 % amplitude. The binary and ternary complexes showed spherical structure and good dispersibility, with the average size of 121.2 nm and 132.4 nm respectively. The anthocyanins encapsulation efficiency of ACNs-UGCA-CMC increased almost 20 % than ACNs-UGCA. ACNs-UGCA-CMC had better colloidal stabilities than ACNs-UGCA, such as thermal stability and dilution stability. Simultaneously, both of the binary and ternary complexes significantly prevented anthocyanins from being degraded by heat treatment, ascorbic acid, sucrose and simulated gastrointestinal environment. The protective effect of ACNs-UGCA-CMC was more significant. Furthermore, ACNs-UGCA-CMC showed slower anthocyanins release in simulated releasing environment in vitro and a long retention time in vivo. Our current study provides a potential delivery for improving the stability and controlling release of anthocyanins.

Preparation and evaluation of ovalbumin-fucoidan nanoparticles for nicotinamide mononucleotide encapsulation with enhanced stability and anti-aging activity

Nicotinamide mononucleotide (NMN) has been recognized as a promising bio-active compound in relieving aging-related mitochondrial dysfunction. Self-assembled nanoparticles were prepared based on interaction between ovalbumin (OVA) and fucoidan to improve the stability and bio-accessibility of NMN. The OVA-fucoidan nanoparticles (OFNPs) displayed outstanding thermal stability and entrapment ability of NMN. The reactive oxygen species (ROS) analysis and senescence-associated β-galactosidase (SA-β-gal) staining characterization indicated that NMN encapsulated by OFNPs could effectively alleviate the cellular senescence of d-galactose-induced senescent cells. In vivo Caenorhabitis elegans experiment demonstrated that NMN-loaded OFNPs caused less accumulation of lipofuscin and protected NMN from thermal damage. Compared with free NMN, the NMN-loaded OFNPs prolonged lifespan from 28 to 31 days, increased 26% reproductive ability, and improved 12% body length of Caenorhabitis elegans. The results indicated that the use of nanocarriers could be a good strategy to improve anti-oxidative stress and anti-aging ability of NMN.

Effects of different protectants on the IgY content and physico-chemical properties of spray-dried egg yolk powder

BACKGROUND

Egg yolk powder (EYP) with high immunoglobulin of yolk (IgY) content and good solubility is in great demand in the market of functional foods. In this article, the properties of spray-dried EYP with the addition of five protectants (maltodextrin, trehalose, mannitol, maltitol and sucrose) were investigated.

RESULTS

All the protectants increased IgY activity and solubility of EYP. Among them, EYP with maltodextrin displayed the highest activity of IgY (27.11 mg/g), the highest solubility (66.39%) and the lowest surface hydrophobicity. Moreover, the average particle size of EYP with maltodextrin was the smallest (9.78 μm). The egg yolk particles obtained by adding the protectants are more uniformly distributed and have smaller particle size. Fourier-transform infrared spectroscopy confirmed the structural integrity of the proteins, indicating that the protectants addition enhanced the hydrogen bonding forces between the EYP protein molecules.

CONCLUSION

The addition of protectants can significantly improve the IgY content, solubility and structural stability of EYP. © 2023 Society of Chemical Industry.

Different protein-anthocyanin complexes engineered by ultrasound and alkali treatment: Structural characterization and color stability

Through alkali treatment (AT) and ultrasound (UT)-assisted processing producing covalent protein-anthocyanin complexes, we investigated the impact of treatment methods and protein types on conjugation efficiency, protein structure, and color stability. Our findings revealed the effective grafting of anthocyanins (ACNs) onto proteins, with myofibrillar protein (MP) exhibiting the highest conjugation efficiency of 88.33% after UT (p <.05). UT accelerated the structure unfolding of distinct protein samples, leading to the exposure of sulfhydryl, and hydrophobic groups in proteins, and enhanced the oxidation stability of ACNs. Notably, the modified ACNs maintained a favorable pH-color relationship, while U-MP showed a significantly higher absorbance (0.4998) than the other groups (p <.05) at pH 9.0, demonstrating an outstanding color improvement. UT-assisted processing also accelerated the NH₃ reaction. Thus, the combination of UT and MP holds the potential for pH-color-responsive intelligent packaging and increases the efficiency of UT processing.

Coordinated encapsulation by β-cyclodextrin and chitosan derivatives improves the stability of anthocyanins

To improve the stability of anthocyanins (ACNs), ACNs were loaded into dual-encapsulated nanocomposite particles by self-assembly using β-cyclodextrin (β-CD) and two different water-soluble chitosan derivatives, namely, chitosan hydrochloride (CHC) and carboxymethyl chitosan (CMC). The ACN-loaded β-CD-CHC/CMC nanocomplexes with small diameters (333.86 nm) and had a desirable zeta potential (+45.97 mV). Transmission electron microscopy (TEM) showed that the ACN-loaded β-CD-CHC/CMC nanocomplexes had a spherical structure. Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (¹H NMR) and X-ray diffraction (XRD) confirmed that the ACNs in the dual nanocomplexes were encapsulated in the cavity of the β-CD and that the CHC/CMC covered the outer layer of β-CD through noncovalent hydrogen bonding. The ACNs from the dual-encapsulated nanocomplexes improved stability of ACNs under adverse environmental conditions or in a simulated gastrointestinal environment. Further, the nanocomplexes exhibited good storage stability and thermal stability over a wide pH range when added into simulated electrolyte drinks (pH = 3.5) and milk tea (pH = 6.8). This study provides a new option for the preparation of stable ACNs nanocomplexes and expands the applications for ACNs in functional foods.

The properties and formation mechanism of ovalbumin-fucoidan complex

The polymeric materials formed by proteins and polysaccharides through molecular interactions have attracted public attention. In this study, a novel binary complex consisting of ovalbumin (OVA) and fucoidan (FUC) was obtained by electrostatic self-assembly. The self-assembly properties and the formation mechanism of the OVA-FUC binary complex were investigated by changing the charging degree and density of complex through altering pH value and polysaccharides proportion. Structural changes during the OVA-FUC electrostatic self-assembly process were investigated by a phase diagram, ζ-potential, and particle size. The optimal conditions for preparing soluble OVA-FUC binary complex were determined by the protein retention rate and insoluble solids content. Results showed that the soluble OVA-FUC binary complex could be obtained at the pH of 3.5 to 5, and the insoluble OVA-FUC binary complex was generated at the pH of 2.5 to 3.5. The OVA-FUC binary complex (19 ± 0.29 mN/m) possessed a medium ability to reduce interfacial tension of the water-oil interface compared with OVA (15 ± 1.13 mN/m) and FUC (24 ± 0.3 mN/m), indicating that OVA-FUC binary complex has good amphiphilicity and can be applied as a potential pH-controlled emulsifier in function food systems for delivering bioactive substances.

Research advance of non-thermal processing technologies on ovalbumin properties: The gelation, foaming, emulsification, allergenicity, immunoregulation and its delivery system application

Ovalbumin (OVA) is the most abundant protein in egg white, with excellent functional properties (e.g., gelling, foaming, emulsifying properties). Nevertheless, OVA has strong allergenicity, which is usually mediated by specific IgE thus results in gut microbiota dysbiosis and causes atopic dermatitis, asthma, and other inflammation actions. Processing technologies and the interactions with other active ingredients can influence the functional properties and allergic epitopes of OVA. This review focuses on the non-thermal processing technologies effects on the functional properties and allergenicity of OVA. Moreover, the research advance about immunomodulatory mechanisms of OVA-mediated food allergy and the role of gut microbiota in OVA allergy was summarized. Finally, the interactions between OVA and active ingredients (such as polyphenols and polysaccharides) and OVA-based delivery systems construction are summarized. Compared with traditional thermal processing technologies, novel non-thermal processing techniques have less damage to OVA nutritional value, which also improve OVA properties. OVA can interact with various active ingredients by covalent and non-covalent interactions during processing, which can alter the structure or allergic epitopes to affect OVA/active components properties. The interactions can promote OVA-based delivery systems construction, such as emulsions, hydrogels, microencapsulation, nanoparticles to encapsulate bioactive components and monitor freshness for improving foods quality and safety.

Natural egg yolk emulsion as wall material to encapsulate DHA by two-stage homogenization: emulsion stability, rheology analysis and powder properties

The use of safe physical means to achieve egg yolk as natural carrier for active ingredients plays an important role in increasing the added value of egg yolk. In this paper, we prepared DHA-fortified egg yolk emulsion using high-speed shearing (HSS) only and HSS combined with high-pressure homogenization (HPH), respectively. HPH reduced particle size and zeta potential, allowing for better emulsion stability. After 14 days of storage, the encapsulation efficiency was 93.88% even with 15% (w/w) algae oil addition. Rheology analysis presented that HPH improve the viscoelasticity, indicating the enhancement of interaction force between droplets. Then, vaccum low-temperature spray drying (VLTSD) was used to produce powder, which allowed for minimal damage to the encapsulation structure according to scanning electron microscopy and the hydration properties of powder was improved. This work provides a new idea for using egg yolk to encapsulate DHA and improving the properties of egg yolk powder.

Providing New Insights on the Molecular Properties and Thermal Stability of Ovotransferrin and Lactoferrin

Ovotransferrin (OVT) is a multi-functional protein showing over 50% homology with Bovine lactoferrin (BLF) and human lactoferrin (HLF), which have the potential to be a substitute for lactoferrin (LF) due to the limited production of LF. To explore the substitutability of OVT, the molecular properties and thermal stability of OVT, BLF and HLF were characterized because these properties will affect the processing quality and biological activities of protein products when exposed to different processing conditions (e.g., temperature, pH, ion strength). The results showed that although obviously different isoelectric point (5.31, 9.12 and 8.75 for OVT, BLF and HLF, respectively), particle size distribution and hydrophobicity were found, they exhibited good dispersity because of high potential value. They showed an endothermic peak at 80.64 °C, 65.71 °C and 90.01 °C, respectively, and the denaturation temperature varied at different pH and ionic strength. OVT and BLF were more susceptible to heating at pH 5.0 as reflected by the decline of denaturation temperature (21.78 °C shift for OVT and 5.81 °C shift for BLF), while HLF could remain stable. Compared with BLF, OVT showed higher secondary structure stability at pH 7.0 and 9.0 with heating. For example, the α-helix content of OVT changed from 20.35% to 15.4% at pH 7.0 after heating, while that of BLF changed from 20.05% to 6.65%. The increase on fluorescence intensity and redshifts on the maximum wavelength after heating indicated the changes of tertiary structure of them. The turbidity measurements showed that the thermal aggregation degree of OVT was lower than BLF and HLF at pH 7.0 (30.98%, 59.53% and 35.66%, respectively) and pH 9.0 (4.83%, 12.80% and 39.87%, respectively). This work demonstrated the similar molecular properties and comparable thermal stability of OVT to BLF and HLF, which can offer a useful reference for the substitute of LF by OVT.

Effects of encapsulation methods on bioaccessibility of anthocyanins: a systematic review and meta-analysis

Anthocyanins have multiple health benefits. However, they are prone to degradation during gastrointestinal digestion, impeding their utilization. Various encapsulation systems have been proposed to improve their bioaccessibility and bioavailability. This review aims to provide a systematic evaluation and meta-analysis of published studies examining the effect of microencapsulation on the bioaccessibility of anthocyanins. A comprehensive and systematic literature search of three databases (Scopus, PubMed, and Web of Science) was conducted. Studies were selected according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria and were reviewed independently by two investigators. Overall, 34 articles were included in the systematic review and 24 were included in the meta-analysis. The fold changes in bioaccessibility between encapsulated and non-encapsulated anthocyanins from eligible studies were calculated. The median and 95% confidence intervals (CI) of the fold changes for spray-drying (median 1.23, 95% CI 0.91-1.92), freeze-drying (median 1.19, 95% CI 0.61-1.28), simple coacervation (median 1.80, 95% CI 1.41-3.20), and complex coacervation (median 1.61, 95% CI 0.21-25.00) were calculated. Simple coacervation showed a promising protection against degradation during in vitro digestion. However, when a large number of anthocyanins cannot be released from the microparticles during digestion, encapsulation impedes the bioaccessibility of anthocyanins.

Evaluation of the structure-activity relationship between allergenicity and spatial conformation of ovalbumin treated by pulsed electric field

The aim of the present study was to investigate the effect of pulsed electric field (PEF) treatment on ovalbumin (OVA) induced allergens and reveal potential allergy regulatory mechanisms. At 10 kV/cm, OVA-induced allergic symptoms were significantly reduced, and the capacity of OVA to bind with specific IgG1 and IgE was reduced by 10.32% and 3.61%, respectively. Furthermore, the degranulation of RBL-2H3 cells and allergen activity were also reduced by 4.63% and 22.15%, respectively. Interestingly, the α-helix content was reduced by 5.81% and the fluorescence intensity was increased by 6.90% with PEF treatment. At 10 kV/cm, water contact angle and surface hydrophobicity increased by 8.40% and 0.18%, respectively, indicating that PEF treatment increased the exposure of hydrophobic amino acid residues. PEF treatment alters the hydrogen bonding and hydrophobic interactions in the protein, which masks the binding sites of sensitized epitopes, and consequently reduces allergies.

Egg white protein-based delivery system for bioactive substances: a review

Some bioactive substances in food have problems such as poor solubility, unstable chemical properties and low bioavailability, which limits their application in functional food. Recently, many egg white protein-based delivery carriers have been developed to improve the chemical stability, biological activity and bioavailability of bioactive substances. This article reviewed the structure and properties of several major egg white proteins commonly used to construct bioactive substance delivery systems. Several common carrier types based on egg white proteins, including hydrogels, emulsions, micro/nanoparticles, aerogels and electrospinning were then introduced. The biological functions of common bioactive substances, the limitations, and the role of egg white protein-based delivery systems were also discussed. At present, whole egg white protein, ovalbumin and lysozyme are most widely used in delivery systems, while ovotransferrin, ovomucoid and ovomucin are less developed and applied. Egg white protein-based nanoparticles are currently the most commonly used delivery carriers. Egg white protein-based hydrogels, emulsions, and microparticles are also widely used. Future research on the application of various egg white proteins in developed new delivery systems will provide more choices for the delivery of various bioactive substances.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

pH-driven self-assembly of alcohol-free curcumin-loaded zein-propylene glycol alginate complex nanoparticles

This study aimed to prepare alcohol-free curcumin-loaded zein-propylene glycol alginate (zein-PGA-Cur) nanoparticles using the pH-driven method to enhance the bioavailability and physicochemical stability of curcumin. The prepared zein-PGA-Cur nanoparticles exhibited a small size (360 nm) and negative zeta-potential (-5.8 mV), as well as excellent physical stability, under storage conditions of pH 4.0 and temperature at 4 °C for 30 days. In addition, the Fourier transform infrared spectroscopy results demonstrated that the main interactions of pH-driven for the formation of zein-PGA-Cur nanoparticles were hydrogen bonding, hydrophobic, and electrostatic interactions. Fluorescence spectroscopy revealed that the curcumin-induced fluorescence quenching of zein was static. Circular Dichroism spectroscopy demonstrated that the pH-driven method mainly decreased the β-sheet structure of zein from 3.9 % to 1.4 %. Furthermore, the HT-29 colorectal adenocarcinoma cells viability experiments revealed that the prepared zein-PGA-Cur nanoparticles exhibited excellent biocompatibility. In vivo rat experiments also demonstrated that the prepared nanoparticles resulted in a higher plasma concentration of curcumin, representing a 7.2-fold enhancement in bioavailability compared with pure curcumin crystals. The findings of this study will provide a green and energy-saving method for the development of insoluble drug self-assembly systems and promote their wider applications in drug delivery.

The presence of propylene glycol alginate increased the stability and intestine-targeted delivery potential of carboxymethyl starch-stabilized emulsions

Propylene glycol alginate (PGA) was added to improve the stability and delivery performance of carboxymethyl starch (CMS)-stabilized emulsion. In the first instance, the CMS/PGA complexes were characterized, which proved that the formation of CMS/PGA complexes mainly depended on hydrogen bonding, and the CMS/PGA complexes showed porous networks. The CMS/PGA complexes were more hydrophobic than CMS, and the interaction of CMS with PGA enhanced the thermal stability of CMS. Next, the effects of CMS/PGA complexes on the properties of emulsions were investigated, and the intestine-targeted delivery potential of emulsions was evaluated through the in vitro release study as well. The droplet size of CMS/PGA complex-stabilized emulsions gradually decreased and the encapsulation efficiency (EE) improved with increasing the PGA content in CMS/PGA complexes. The addition of PGA also greatly improved the physical stability of emulsions, including anti-flocculation and anti-coalescence stabilities. All emulsions exhibited non-Newtonian pseudoplastic properties. Furthermore, the emulsions stabilized by CMS/PGA complexes showed reduced curcumin (Cur) release in the simulated gastric fluid (SGF), whereas exhibited sustained release in the α-amylase-containing simulated intestinal fluid (SIF). These results demonstrated that the emulsion stabilized by CMS/PGA complex was able to control and modulate the release of Cur in the gastrointestinal tract, and was therefore a promising intestine-targeted delivery system for Cur.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.

Bioactive compounds: Application of albumin nanocarriers as delivery systems

Enriched products with bioactive compounds (BCs) show the capacity to produce a wide range of possible health effects. Most BCs are essentially hydrophobic and sensitive to environmental factors; so, encapsulation becomes a strategy to solve these problems. Many globular proteins have the intrinsic ability to bind, protect, encapsulate, and introduce BCs into nutraceutical or pharmaceutical matrices. Among them, albumins as human serum albumin (HSA), bovine serum albumin (BSA), ovalbumin (OVA) and α-lactalbumin (ALA) are widely abundant, available, and applied in many industrial sectors, becoming promissory materials to encapsulate BCs. Therefore, this review focuses on researches about the main groups of natural origin BCs (namely phenolic compounds, lipids, vitamins, and carotenoids), the different types of nanostructures based on albumins to encapsulate them and the main fields of application for BCs-loaded albumin systems. In this context, phenolic compounds (catechins, quercetin, and chrysin) are the most extensively BCs studied and encapsulated in albumin-based nanocarriers. Other extensively studied subgroups are stilbenes and curcuminoids. Regarding lipids and vitamins; terpenes, carotenoids (β-carotene), and xanthophylls (astaxanthin) are the most considered. The main application areas of BCs are related to their antitumor, anti-inflammatory, and antioxidant properties. Finally, BSA is the most used albumin to produced BCs-loaded nanocarriers.

Maillard-Type Protein-Polysaccharide Conjugates and Electrostatic Protein-Polysaccharide Complexes as Delivery Vehicles for Food Bioactive Ingredients: Formation, Types, and Applications

Due to their combination of featured properties, protein and polysaccharide-based carriers show promising potential in food bioactive ingredient encapsulation, protection, and delivery. The formation of protein–polysaccharide complexes and conjugates involves non-covalent interactions and covalent interaction, respectively. The common types of protein–polysaccharide complex/conjugate-based bioactive ingredient delivery systems include emulsion (conventional emulsion, nanoemulsion, multiple emulsion, multilayered emulsion, and Pickering emulsion), microcapsule, hydrogel, and nanoparticle-based delivery systems. This review highlights the applications of protein–polysaccharide-based delivery vehicles in common bioactive ingredients including polyphenols, food proteins, bioactive peptides, carotenoids, vitamins, and minerals. The loaded food bioactive ingredients exhibited enhanced physicochemical stability, bioaccessibility, and sustained release in simulated gastrointestinal digestion. However, limited research has been conducted in determining the in vivo oral bioavailability of encapsulated bioactive compounds. An in vitro simulated gastrointestinal digestion model incorporating gut microbiota and a mucus layer is suggested for future studies.

Intelligent colorimetric film incorporated with anthocyanins-loaded ovalbumin-propylene glycol alginate nanocomplexes as a stable pH indicator of monitoring pork freshness

Protein-polysaccharide nanocomplexes system could improve the low stability of ACNs, making ACNs become a potential and stable pH indicator. In this study, intelligent colorimetric film was designed to monitor pork freshness by incorporating ACNs-loaded ovalbumin-propylene glycol alginate nanocomplexes (ACNs-loaded OVA-PGA) into polyvinyl alcohol/ glycerol (PG) matrix. The intelligent film (PG/ACNs-loaded OVA-PGA film) presented well barrier performance (lower water vapor permeability and light transmittance at 200-600 nm). Fourier transform infrared spectroscopy further confirmed the hydrogen bonds among film-forming components. Moreover, Scanning electron microscope and X-ray diffraction showed that ACNs-loaded OVA-PGA was uniformly distributed in film matrix but decreased the crystallinity of polyvinyl alcohol. PG/ACNs-loaded OVA-PGA film had distinguishable colorimetric response to pH 2.0-11.0 buffers and volatile ammonia. In the test, PG/ACNs-loaded OVA-PGA film displayed visible color alterations from purplish-red to dark-blue as pork freshness decreased, suggesting it can be used in intelligent packaging for real-time monitoring freshness of meat products.

pH-driven self-assembly of alcohol-free curcumin-loaded propylene glycol alginate nanoparticles

The purpose of this paper was to explore the application of propylene glycol alginate (PGA) alone in alcohol-free curcumin-loaded nanoparticles (PGA/Cur) prepared by a pH-driven method to solve the curcumin shortcomings of low water solubility, stability and bioavailability. One of the bright spots of PGA/Cur was its extremely high loading capacity. PGA/Cur formed a spherical structure mainly by hydrophobic interaction and hydrogen bonding, making curcumin amorphous. PGA/Cur exhibited stability at pH 4.0-8.0 due to its high surface charges. PGA/Cur still showed a unimodal size distribution even under 3000 mM ionic strength. Heating caused uneven size distribution, but the smaller size still presented its thermostability. PGA/Cur exhibited good physical stability and slowed down the curcumin degradation with t_1/2 of 37.47 days during storage. PGA/Cur could maintain structural integrity in gastric acid and released curcumin in the intestine, thus improving the bioaccessibility of curcumin. Additionally, PGA/Cur displayed the solubilization after lyophilization.

A Review on Polymer and Lipid-Based Nanocarriers and Its Application to Nano-Pharmaceutical and Food-Based Systems

Recently, owing to well-controlled release, enhanced distribution and increased permeability, nanocarriers used for alternative drug and food-delivery strategies have received increasingly attentions. Nanocarriers have attracted a large amount of interest as potential carriers of various bioactive molecules for multiple applications. Drug and food-based delivery via polymeric-based nanocarriers and lipid-based nanocarriers has been widely investigated. Nanocarriers, especially liposomes, are more and more widely used in the area of novel nano-pharmaceutical or food-based design. Herein, we aimed to discuss the recent advancement of different surface-engineered nanocarriers type, along with cutting-edge applications for food and nanomedicine and highlight the alternative of phytochemical as nanocarrier. Additionally, safety concern of nanocarriers was also highlighted.

Construction and evaluation of ovalbumin-pullulan nanogels as a potential delivery carrier for curcumin

Preparation of protein/polysaccharide nanocomplexes for delivering environment-sensitive bioactive compounds is significant in the fields of functional foods and pharmaceuticals. In this work, ovalbumin-pullulan (OVA-Pul) nanogels were fabricated through Maillard reaction combined with heat treatment. The results of SDS-PAGE, circular dichroism and conjugation yield (84.96%) confirmed the covalent crosslinking of ovalbumin to pullulan. Dynamic light scattering measurements indicated that nanogels and curcumin-loaded nanogels exhibited small particle diameter at around 190 nm and 160 nm, and excellent polydispersity index at 0.227 and 0.146, respectively. OVA-Pul nanogels showed good encapsulation efficiency (88.38%) and loading capacity (8.78%) for curcumin. Transmission electron microscope observations and in vitro gastrointestinal digestion suggested that OVA-Pul nanogels facilitated the controlled release of curcumin and the spherical structure of curcumin-loaded nanogels was damaged during digestion. Notably, both nanogels and curcumin-loaded nanogels showed desirable storage stability during 30 d. Hence, OVA-Pul nanogels have the potential for effectively delivering nutrients and drugs.