Water-in-water-in-water emulsions formed by cooling mixtures of guar, amylopectin and gelatin

Interfacial Membranization of Regenerated Cellulose Nanoparticles and a Protein Renders Stable Water-in-Water Emulsion

Pickering water-in-water (W/W) emulsions stabilized by biobased colloids are pertinent to engineering biomaterials with hierarchical and confined architectures. In this study, stable W/W emulsions are developed through membranization utilizing biopolymer structures formed by the adsorption of cellulose II nanospheres and a globular protein, bovine serum albumin (BSA), at droplet surfaces. The produced cellulose II nanospheres (NPcat, 63 nm diameter) bearing a soft and highly accessible shell, endow rapid and significant binding (16 mg cm- 2) with BSA. NPcat and BSA formed complexes that spontaneously stabilized liquid droplets, resulting in stable W/W emulsions. It is proposed that such a system is a versatile all-aqueous platform for encapsulation, (bio)catalysis, delivery, and synthetic cell mimetics.

Effect of solution on starch structure: New separation approach of amylopectin fraction from gelatinized native corn starch

The complete dissolution of starch without degradation are necessary prerequisites for starch fractionation to obtain amylose or amylopectin (AP). With the recent, continuous progress in finding efficient and eco-friendly starch-dissolving solutions, applying new solvents for starch fractionation is important. In this study, the effects of dimethyl sulfoxide (DMSO), NaOH, and CaCl2 solutions on starch structure and AP product parameters during starch fractionation were compared with respect to the starch deconstruction effect. This study proved that the CaCl2 solution could effectively dissolve corn starch (50 °C, solubility of 98.96 %), and promote the regeneration of starch into uniform and fine particles. Furthermore, the three solvents (DMSO, NaOH, and CaCl2) changed the crystal structure of corn starch, but they were all non-derivatizing solvents. The effect of the CaCl2 solution on the molecular structure of corn starch was the least significant of the three solvents. Finally, the extraction rate of AP from the CaCl2 solution reached 69.45 %. In conclusion, this study presents a novel and effective method for AP extraction.

Water in water emulsion stabilized by liposomes developed from whey protein isolate and xanthan gum: Environmental stability and photoprotection effect for riboflavin

The purpose of this work is to explore the feasibility of water in water (W/W) emulsion stabilized with liposomes as a water-soluble nutraceutical carrier. A W/W emulsion system composed of xanthan gum (XG) and whey protein isolate (WPI) with different amount (0.2 %, 0.4 %, and 0.6 %) of liposomes as stabilizer was constructed. Fast green staining observation showed that XG was the internal phase and WPI was the continuous phase respectively. Confocal laser scanning microscopy revealed that with the increase of liposomes concentration from 0.4 % to 0.6 %, the interface thickness of the W/W emulsions was approximately twice that of the 0.2 % liposome-stabilized emulsion.The emulsions remained stable under neutral and weakly alkaline conditions. The droplet sizes of the emulsions were little affected by ionic strength. The binding constant (Ka) for XG to riboflavin (12.22) was approximately 5 times that for WPI to riboflavin (2.46), suggesting that riboflavin had a stronger binding affinity for the XG molecule compared to WPI. The fluorescence spectra of riboflavin showed that 0.4 % and 0.6 % liposome stabilized emulsions could effectively retard the photodegradation of riboflavin under ultraviolet irradiation. The successful construction of liposomes stabilized W/W emulsion provides a novel strategy for delivering water-soluble bioactive substances.

Crosslinking alginate at water-in-water Pickering emulsions interface to control the interface structure and enhance the stress resistance of the encapsulated probiotics

HYPOTHESIS

The strategies for stabilizing water-in-water (W/W) emulsions include the adsorption of solid particles at the water-water interface and the generation of interfacial films. We hypothesize that if sodium alginate is crosslinked at the water-water interface of W/W Pickering emulsions, the microstructure and rheological properties of the emulsions could be improved, thus enhancing the activity of encapsulated probiotics in simulated gastrointestinal digestion.

EXPERIMENTS

The W/W Pickering emulsions comprised a dispersed maltodextrin (MD) phase in a continuous hydroxypropyl methylcellulose (HPMC) phase. The crosslinking W/W Pickering emulsion with fine-tuned internal structure was designed by leaching the CaCO3 particles packed in the dispersed phase to release Ca2+ crosslinked with sodium alginate.

FINDINGS

Confocal laser scanning microscope results revealed sodium alginate crosslinked with Ca2+ at the W/W interface. The rheological results of the crosslinking W/W Pickering emulsions suggested that the loss modulus (G″) was higher than the energy storage modulus (G'). The microstructure indicated that the emulsions formed a dense porous network structure after crosslinking conditions. The viable cell count of Lactobacillus helveticus CICC 22536 (LC) encapsulated in crosslinking W/W Pickering emulsion after simulated gastrointestinal digestion was 7.563 × 107 CFU/mL, which was three orders of magnitude higher than that of naked cells.

Preparation of cassava starch-gelatin yolk-shell microspheres by water-in-water emulsion method

This paper reports the preparation and characterization of gelatin-cassava starch microspheres using the water-in-water emulsion technique. The effects of different weight ratios (10: 0, 9: 1, 8: 2, 7: 3, 6: 4, 5: 5) of starch to gelatin on the morphology, structure, thermal properties, and stability of microspheres were investigated. The morphology results showed that most microspheres had spherical shapes and smooth surfaces. When the weight ratio of starch to gelatin was 5: 5, the prepared microspheres formed a stable yolk-shell structure. The swelling capacity of the microspheres increased with the proportion of gelatin, up to 682.3 %. The gelatin and starch in the microspheres were compatible but not miscible. Compared with the native starch, the crystalline structure of microspheres changed from A-type to a mixture of B-type and V-type, and the relative crystallinity decreased. Differential scanning calorimetry results showed that the melting of microspheres involved both gelatin dissolution and starch gelatinization. Due to the formation of composite microspheres, the starch content decreased, and the release of reducing sugars from the microspheres upon hydrolysis was reduced. The gelatin-cassava starch microspheres are simple to prepare, biocompatible, and can be used as a potential material for microencapsulation.

Effect of adding gelatin on the stability of water in water emulsions formed by mixtures of amylopectin and guar gum

Stable water in water (W/W) emulsions of guar rich droplets dispersed in an amylopectin rich continuous phase (G/A) and the inverse (A/G) can be achieved by adding gelatin and inducing microphase separation of the latter by cooling. In this research, the effect of gelatin on the emulsion stability was further studied by storing the emulsions at 10, 20 and 25 °C. The visual aspect, the microstructure, and the viscosity of the emulsions were investigated at different times during storage at different temperatures and pH. It was found that depending on the conditions, the gelatin phase wetted the interface or formed small discrete microdomains that adsorbed at the interface and dispersed in the bulk phases. The observed differences in morphology and stability are related to the interplay of the rates of aggregation, phase separation of gelatin, which itself depend on the gelatin concentration, temperature and pH. Emulsions could be prepared in this manner that were stable for at least one week and remained visually homogeneous. We believe that this is a promising method to stabilize W/W emulsions as long as the components of the emulsion are incompatible with aggregated gelatin.

Multicompartment Hydrogels

Hydrogels belong to the most promising materials in polymer and materials science at the moment. As they feature soft and tissue-like character as well as high water-content, a broad range of applications are addressed with hydrogels, e.g. tissue engineering and wound dressings but also soft robotics, drug delivery, actuators and catalysis. Ways to tailor hydrogel properties are crosslinking mechanism, hydrogel shape and reinforcement, but new features can be introduced by variation of hydrogel composition as well, e.g. via monomer choice, functionalization or compartmentalization. Especially, multicompartment hydrogels drive progress towards complex and highly functional soft materials. In the present review the latest developments in multicompartment hydrogels are highlighted with a focus on three types of compartments, i.e. micellar/vesicular, droplets or multi-layers including various sub-categories. Furthermore, several morphologies of compartmentalized hydrogels and applications of multicompartment hydrogels will be discussed as well. Finally, an outlook towards future developments of the field will be given. The further development of multicompartment hydrogels is highly relevant for a broad range of applications and will have a significant impact on biomedicine and organic devices. This article is protected by copyright. All rights reserved.

Effect of the Interfacial Tension on Droplet Association in Aqueous Multiphase Systems

Aqueous multiphase systems (AMPS) were formed by mixtures of three or more incompatible water-soluble macromolecules. Droplets formed by different phases in the water-in-water emulsions were found to associate and their morphology was studied using confocal laser scanning microscopy. By analyzing the angles between different associated phases it was possible to determine the relative interfacial tensions between phases with respect to each other. In this manner, the relative interfacial tension of 15 different pairs of polymers solutions was determined. The effect of the total polymer concentration on the relative interfacial tensions was found to be small as long as mixing of the polymers in the phases was small. The effect of adding protein microgels was studied for systems where they adsorb at the interface between the phases. It is shown that protein microgels can in some cases stabilize associated droplets in suspension.