Multifunctional chitosan-based film loaded with hops β-acids: Preparation, characterization, controlled release and antibacterial mechanism

Synthesis and Characterization of a Novel Chitosan-Based Nanoparticle-Hydrogel Composite System Promising for Skin Wound Drug Delivery

As a natural preservative, nisin is widely used in the food industry, while its application in biomedicine is limited due to its susceptibility to interference from external conditions. In this study, a nanoparticle-hydrogel composite system was designed to encapsulate and release nisin. Nisin nanoparticles were identified with a smooth, spherical visual morphology, particle size of 122.72 ± 4.88 nm, polydispersity coefficient of 0.473 ± 0.063, and zeta potential of 23.89 ± 0.37 mV. Based on the sample state and critical properties, three temperature-sensitive hydrogels based on chitosan were ultimately chosen with a rapid gelation time of 112 s, outstanding reticular structure, and optimal swelling ratio of 239.05 ± 7.15%. The composite system exhibited the same antibacterial properties as nisin, demonstrated by the composite system's inhibition zone diameter of 17.06 ± 0.83 mm, compared to 20.20 ± 0.58 mm for nisin, which was attributed to the prolonged release effect of the hydrogel at the appropriate temperature. The composite system also demonstrated good biocompatibility and safety, making it suitable for application as short-term wound dressings in biomedicine due to its low hemolysis rate of less than 2%. In summary, our nanoparticle-based hydrogel composite system offers a novel application form of nisin while ensuring its stability, thereby deepening and broadening the employment of nisin.

Biopolymer films incorporated with chlorogenic acid nanoparticles for active food packaging application

Food packaging is innovating towards more environmental-friendly polymers and broader applications of bioactive compounds. In this study, active packaging materials were successfully prepared by incorporating chlorogenic acid (CGA) nanoparticles into pullulan/gelatin polymer matrixes. The rhamnolipid (RL) and/or CGA were combined with chitosan (CS) to synthesize active nanoparticles by the ionic crosslinking method. The film containing CS/RL/CGA nanoparticles (F/CRC) exhibited both ultrahigh visible light (400-760 nm) transmittance (approximately 90%) and UVA (320-400 nm)-blocking efficiency (89.06%). Its fluorescent properties can be used for anti-counterfeiting. Significantly, the bacterial inhibition rates of F/CRC against E. coli and S. aureus were 92.14% and 98.72%. F/CRC also showed good antioxidant capability and biosafety. Finally, the packaging test further indicated that F/CRC could delay the browning of bananas and the bacteria growth of chicken samples. This work presents a green and feasible route to produce functional materials with UV-shielding properties for packaging applications.

Synthesis of β-acids loaded chitosan-sodium tripolyphosphate nanoparticle towards controlled release, antibacterial and anticancer activity

The development of nanoparticles loaded with natural active ingredients is one of the hot trends in the pharmaceutical industry. Herein, chitosan was selected as the base material, and sodium tripolyphosphate was chosen as the cross-linking agent. Chitosan nanoparticles loaded with β-acids from hops were prepared by the ionic cross-linking method. The results of Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) indicated that chitosan nanoparticles successfully encapsulated β-acids. The loading capacity of chitosan nanoparticles with β-acids was 2.00 %-18.26 %, and the encapsulation efficiency was 0.58 %-55.94 %. Scanning electron microscopy (SEM), transmission electron microscope (TEM), particle size, and zeta potential results displayed that the nanoparticles revealed a sphere-like distribution with a particle size range of 241-261 nm, and the potential exhibited positive potential (+14.47-+16.27 mV). The chitosan nanoparticles could slowly release β-acids from different simulated release media. Notably, the β-acids-loaded nanoparticles significantly inhibited Staphylococcus aureus ATCC25923 (S. aureus) and Escherichia coli ATCC25922 (E. coli). Besides, β-acids-loaded chitosan nanoparticles were cytotoxic to colorectal cancer cells (HT-29 and HCT-116). Therefore, applying chitosan nanoparticles can further expand the application of β-acids in biomedical fields.

Development of functional, sustainable pullulan-sodium alginate-based films by incorporating essential oil microemulsion for chilled pork preservation

Developing safe, eco-friendly, and functionally edible packaging materials has attracted global attention. Essential oils, can be incorporated into packaging materials as antioxidant and antibacterial agents. However, their high volatility and discontinuous film matrix issues may cause a rough film surface, limiting the application in food packaging. In this study, thyme essential oil microemulsion (TEO-M) was prepared and incorporated into a pullulan-sodium alginate (PS) film. The TEO-M incorporation endowed the PS film with antioxidant and UV protection properties. The antioxidant activities of the TEO-M-incorporated PS film were significantly better than those of the TEO-C (thyme essential oil coarse emulsion)-incorporated PS film. In comparison to TEO-C, the distribution of TEO-M in the film is more uniform. Lipid oxidation and the growth of microorganisms in chilled pork were inhibited by incorporating TEO-M at a concentration of 50 mg/mL in the PS film (PS-50M). After 10 days of storage at 4 °C, the total viable count (TVC) of chilled pork preserved in the PS-50M material was significantly reduced compared to the control group (P < 0.05). This study shows that incorporating TEO-M in the PS film provides a method for applying essential oils in food packaging, which may have great potential in the food industry.

Schiff base synergized with protonation of PEI to achieve smart antibacteria of nanocellulose packaging films

Microbial growth and reproduction can cause food spoilage. Developing the controlled release packaging films for food is an ideal solution. In this study, polyethyleneimine (PEI) was grafted to cellulose nanofibers (CNF) films by Schiff base, and when the CNF/PEI films were stimulated by pH, PEI released from the CNF/PEI films due to Schiff base hydrolysis, improving the antibacterial efficiency of PEI. Stimulated by acid with pH of 4, the PEI cumulative release rate of the CNF/PEI₈₀₀ and the CNF/PEI₂₀₀₀ films reached to 92.90 % and 87.28 %, respectively. At the same time, the amino groups of PEI protonated by obtaining H⁺, the charge density increased, and PEI molecular chains extended, enhancing the antibacterial activity of films. The Zeta potential value on the surface of the CNF/PEI film increased with the decrease of pH value. Schiff base synergized with protonation of PEI to achieve smart antibacteria of CNF packaging films. The antibacterial rates of the film against L. monocytogenes and E. coli were 94.7 % and 90.6 % at pH 4, but 29.5 % and 23.6 % at pH 8, respectively. The developed films also had good barrier properties of oxygen, visible light and mechanical properties, and had an attractive application prospect in food preservation to control release of antibacterial agent.

Characterisation, slow-release, and antibacterial properties of carboxymethyl chitosan/inulin hydrogel film loaded with novel antilisterial durancin GL

This paper reports the development of a hydrogel film with antibacterial activity and controlled release characteristics. Carboxymethyl chitosan (CMCS) is grafted onto durancin GL and inulin via a mediated reaction between N-hydroxysuccinimide and 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride. Rheology tests, Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy, and lap shear tests confirmed the formation of a stable chemical cross-linking and excellent adhesion hydrogel with 4 % CMCS and 8 % inulin. The CMCS/inulin hydrogel film loaded with durancin GL appears transparent and uniform. FTIR spectroscopy results reveal the interaction mode among CMCS, inulin, durancin GL, and the hydrogel film structure. Cross-linking improved thermal stability and water-vapour barrier performance. The hydrophobicity of CMCS/inulin @Durancin GL increased under a durancin GL concentration of 0.036 g/30 mL, and the release of active substances is prolonged. In-vitro antibacterial capacity and salmon preservation experiments show that the addition of durancin GL enhanced the antibacterial activity of the hydrogel film. Therefore, CMCS/inulin@Durancin GL hydrogel films can be used as fresh-keeping packaging materials in practical applications.

Optimization and characterization of carrageenan/gelatin-based nanogel containing ginger essential oil enriched electrospun ethyl cellulose/casein nanofibers

This study aimed to evaluate the effects of nano-gels containing ginger essential oil (GEO) (NGs) made from gelatin and carrageenan gum on ethyl cellulose/casein nano-fibers (NFs). For this purpose, the mechanical, thermal, morphological, antibacterial, antioxidant, hemocompatibility, and biocompatibility properties of the NFs were assessed. It was observed that incorporating NGs into ethyl cellulose/casein NFs improved their morphology, porosity, mechanical properties, and thermal stability. Analysis of the SEM images revealed that adding NGs resulted in NFs with appropriate morphology, devoid of beads, and smaller diameters. The NFs containing NGs exhibited favorable antioxidant properties and inhibited the growth of Escherichia coli and Staphylococcus aureus. Cell viability studies demonstrated that none of the NFs were toxic to normal cells (Human umbilical vein endothelial cells (HUVEC)) and exhibited hemocompatibility. Considering these properties, ethyl cellulose/casein NFs containing NGs and GEO can be utilized as food packaging materials.

Highly Elastic and Anisotropic Wood-Derived Composite Scaffold with Antibacterial and Angiogenic Activities for Bone Repair

Scaffold-based tissue engineering is a promising strategy to address the rapidly growing demand for bone implants, but developing scaffolds with bone extracellular matrix-like structures, suitable mechanical properties, and multiple biological activities remains a huge challenge. Here, it is aimed to develop a wood-derived composite scaffold with an anisotropic porous structure, high elasticity, and good antibacterial, osteogenic, and angiogenic activities. First, natural wood is treated with an alkaline solution to obtain a wood-derived scaffold with an oriented cellulose skeleton and high elasticity, which can not only simulate collagen fiber skeleton in bone tissue but also greatly improve the convenience of clinical implantation. Subsequently, chitosan quaternary ammonium salt (CQS) and dimethyloxalylglycine (DMOG) are further modified on the wood-derived elastic scaffold through a polydopamine layer. Among them, CQS endows the scaffold with good antibacterial activity, while DMOG significantly improves the scaffold's osteogenic and angiogenic activities. Interestingly, the mechanical characteristics of the scaffolds and the modified DMOG can synergistically enhance the expression of yes-associated protein/transcriptional co-activator with PDZ binding motif signaling pathway, thereby effectively promoting osteogenic differentiation. Therefore, this wood-derived composite scaffold is expected to have potential application in the treatment of bone defects.

Facile fabrication of robust bilayer film loaded with chitosan active microspheres for potential multifunctional food packing

The utilization of microcarriers is an effective technique to protect and slow down the release of active ingredients, while the combination of microcarriers and film materials is an important way to expand the application scenario of active ingredients. The aim of this study was to develop a simple and facile strategy for designing a multifunctional bilayer bioactive film that combines stable mechanical properties, sustained-release characteristics for active ingredients with good antioxidant and antibacterial properties. The EGCG-loaded chitosan active microspheres were prepared by sol-gel method, and then the carboxymethyl cellulose solution containing the active microspheres was assembled onto the carboxymethyl chitosan gel substrate based on intermolecular hydrogen bonding to construct a film with a stable bilayer structure. The results indicated that the bilayer film had dense microstructure and excellent mechanical strength (37.05 MPa), and exhibited UV-blocking properties and excellent gas barrier performance. Meanwhile, the loading of active ingredients (EGCG) in the microspheres enabled the bilayer film to exhibit excellent antioxidant and antibacterial properties, and the controlled release of EGCG by the film was sustainable and showed pH responsiveness. The results of this work provide a new perspective for the design and development of bio-based active packaging film with tunable functional characteristics.

Beyond brewing: β-acid rich hop extract in the development of a multifunctional polylactic acid-based food packaging

Hops' (Humulus lupulus L.) phytochemicals are well known for their bioactivity. In the present study, the functional properties of hop extract rich in β-acids, as potassium-salts structures (KBA), were investigated to develop a sustainable active food packaging. Polylactic acid (PLA)-based sheets were incorporated with increasing concentrations of hop extract (0.1-5 % w/w in terms of KBA) and characterized through performance and bioactive properties. KBA-added sheets presented decreased crystallinity and affected mechanical and thermal properties, especially with higher KBA amounts. The sheets' surface hydrophobicity gradually decreased by KBA-extract addition, while the water vapor permeability was not affected. A Fickian diffuse behavior and a better fit to application in fatty foods were observed during release tests. UV-blocking and antioxidant properties were improved by KBA incorporation. Furthermore, results from antibacterial assays revealed great susceptibility of Staphylococcus aureus and Listeria monocytogenes towards sheets added with 5 % of KBA. Moreover, the atomic force microscopy (AFM) observations revealed that KBA led to strong effects on the cell membranes of both bacteria, including disruption of membrane integrity and cell death. Therefore, this study is a sign of great prospects of hop β-acids use, as KBA compound, in the production of sustainable active packaging for safe food shelf-life extension.

Chitosan based film reinforced with EGCG loaded melanin-like nanocomposite (EGCG@MNPs) for active food packaging

In this study, EGCG loaded melanin-like nanoparticles (EGCG@MNPs) were incorporated into chitosan matrix to prepare an active nanocomposite food packaging film, chitosan-EGCG@MNPs (CH-EM). The influence of EGCG@MNPs on the physical and biological properties of the chitosan film was investigated. The EGCG@MNPs nanoparticles were cross-linked with chitosan through intermolecular hydrogen bonds and uniformly distributed in the matrix. Besides, the incorporation of EGCG@MNPs tremendously improved the solubility, swelling ratio and water vapor barrier properties of the film, and permitted superior ultraviolet rays blocking property. In addition, the mechanical properties, thermal stability and surface hydrophobicity have also been significantly improved. The CH-EM^2.0 nanocomposite films also showed excellent oxidation resistance (58.4 ± 4.4%, DPPH and 92.4 ± 1.3%, ABTS⁺), and strong inhibitory ability against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The experimental results comprehensively showed that the prepared chitosan-EGCG@MNPs nanocomposite film offering excellent potential for eco-friendly active food packaging.

Cold Plasma-Based Fabrication and Characterization of Active Films Containing Different Types of Myristica fragrans Essential Oil Emulsion

Myristica fragrans essential oil (MFEO) is a potential active compound for application as an active packaging material. A new approach was developed using a cold plasma treatment to incorporate MFEO to improve the optical, physical, and bacterial inhibition properties of the film. The MFEO was added as coarse emulsion (CE), nanoemulsion (NE), and Pickering emulsion (PE) at different concentrations. The PE significantly affected (p < 0.05) the optical, physical, and chemical properties compared with CE and NE films. The addition of MFEO to low-density polyethylene (LDPE) film significantly reduced water vapor permeability (WVP) and oxygen permeability (OP) and showed marked activity against E. coli and S. aureus (p < 0.05). The release rate of PE films after 30 h was 70% lower than that of CE and NE films. Thus, it can be concluded that the fabrication of active packaging containing MFEO is a potential food packaging material.