Modified Tartary buckwheat (Fagopyrum tataricum Gaertn.) starch by gaseous ozone: Structural, physicochemical and in vitro digestible properties

Ozone induced structural variation in OSA waxy rice starch: Effects on the thermal behavior of starch and its stabilized pickering emulsion

Waxy rice starch (St) was modified by pre-OSA esterification reaction followed by ozone treatment. The molecular structure of this modified product (OSA-OSt) was characterized, and the thermal behaviors and its stabilized Pickering emulsion were evaluated. 1HNMR and XPS results discovered that ozone initially oxidized the hydroxyl groups in the amorphous region of starch (preferentially C2/C3) along with a degree of crosslinking, enhancing the molecular orderliness. This led to an increase in water-holding capability (29.15%) and swelling power (52.8 g/g), and a decrease in solubility (0.35%). TGA, RVA, and DSC indicated that oxidation-induced crosslinking within a brief treatment period enhanced the starch's thermal stability. The structural change enabled the formation of a weak gel structure during the heating process, which displayed high thermal and freeze-thaw stability. The work proves ozone is an effective way of improving the thermal behavior of OSA-starch and its emulsion for subsequent applications in numerous food products.

Comparative analysis of multi-angle structural alterations and cold-water solubility of kudzu starch modifications using different methods

Kudzu, a plant known for its medicinal value and health benefits, is typically consumed in the form of starch. However, the use of native kudzu starch is limited by its high pasting temperature and low solubility, leading to a poor consumer experience. In this study, kudzu starch was treated using six modification techniques: ball milling, extrusion puffing, alcoholic-alkaline, urea-alkaline, pullulanase, and extrusion puffing-pullulanase. The results of the Fourier transform infrared spectrum showed that the intensity ratio of 1047/1022 cm-1 for the modified starches (1.02-1.21) was lower than that of the native kudzu starch (1.22). The relative crystallinity of modified kudzu starch significantly decreased, especially after ball milling, extrusion puffing, and alcoholic-alkaline treatment. Furthermore, scanning electron microscopy and confocal laser scanning microscopy revealed significant changes in the granular structures of the modified starches. After modification, the pasting temperature of kudzu starch decreased (except for the urea-alkaline treatment), and the apparent viscosity of kudzu starch decreased from 517.95 Pa·s to 0.47 Pa·s. The cold-water solubility of extrusion-puffing and extrusion puffing-pullulanase modified kudzu starch was >70 %, which was significantly higher than that of the native starch (0.11 %). These findings establish a theoretical basis for the potential development of instant kudzu powder.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Non-Traditional Starches, Their Properties, and Applications

This review paper focuses on the recent advancements in the large-scale and laboratory-scale isolation, modification, and characterization of novel starches from accessible botanical sources and food wastes. When creating a new starch product, one should consider the different physicochemical changes that may occur. These changes include the course of gelatinization, the formation of starch-lipids and starch-protein complexes, and the origin of resistant starch (RS). This paper informs about the properties of individual starches, including their chemical structure, the size and crystallinity of starch granules, their thermal and pasting properties, their swelling power, and their digestibility; in particular, small starch granules showed unique properties. They can be utilized as fat substitutes in frozen desserts or mayonnaises, in custard due to their smooth texture, in non-food applications in biodegradable plastics, or as adsorbents. The low onset temperature of gelatinization (detected by DSC in acorn starch) is associated with the costs of the industrial processes in terms of energy and time. Starch plays a crucial role in the food industry as a thickening agent. Starches obtained from ulluco, winter squash, bean, pumpkin, quinoa, and sweet potato demonstrate a high peak viscosity (PV), while waxy rice and ginger starches have a low PV. The other analytical methods in the paper include laser diffraction, X-ray diffraction, FTIR, Raman, and NMR spectroscopies. Native, "clean-label" starches from new sources could replace chemically modified starches due to their properties being similar to common commercially modified ones. Human populations, especially in developed countries, suffer from obesity and civilization diseases, a reduction in which would be possible with the help of low-digestible starches. Starch with a high RS content was discovered in gelatinized lily (>50%) and unripe plantains (>25%), while cooked lily starch retained low levels of rapidly digestible starch (20%). Starch from gorgon nut processed at high temperatures has a high proportion of slowly digestible starch. Therefore, one can include these types of starches in a nutritious diet. Interesting industrial materials based on non-traditional starches include biodegradable composites, edible films, and nanomaterials.

Starch Modification with Molecular Transformation, Physicochemical Characteristics, and Industrial Usability: A State-of-the-Art Review

Starch is a readily available and abundant source of biological raw materials and is widely used in the food, medical, and textile industries. However, native starch with insufficient functionality limits its utilization in the above applications; therefore, it is modified through various physical, chemical, enzymatic, genetic and multiple modifications. This review summarized the relationship between structural changes and functional properties of starch subjected to different modified methods, including hydrothermal treatment, microwave, pre-gelatinization, ball milling, ultrasonication, radiation, high hydrostatic pressure, supercritical CO₂, oxidation, etherification, esterification, acid hydrolysis, enzymatic modification, genetic modification, and their combined modifications. A better understanding of these features has the potential to lead to starch-based products with targeted structures and optimized properties for specific applications.

Multi-scale structure characterization of ozone oxidized waxy rice starch

The elucidation of multi-scale structural variation and oxidation reaction mechanism of ozone oxidized waxy rice starch molecules remains a big challenge, limiting its development of intensive processing. In the present work, the changes in the structure of waxy rice starch after ozone treatment were systematically researched by various characterization methods. The study has shown that with the increase in ozone oxidation time, the granules of oxidized starch were polygons with multiple face depressions. It was also observed that ozone first attacked the amorphous zone of the starch granules and then penetrated the crystalline zone. Combining 1D and 2D NMR (¹H NMR, ¹³C NMR, HSQC and HMBC) and other methods, it was proved that ozone oxidation led to ring splitting between C₂ and C₃ of the glucose unit. The resulting hemiacetal groups showed different types of structures. Among them, the main structures were intramolecular acetals and intermolecular hemiacetals. This research offered theoretical guidance for the utilization of ozone oxidation technology for starch modification and the development of waxy rice new foods.

Ozone exposure tunes the physicochemical properties of sweet potato starch by modifying its molecular structure

Ozonation is an efficient method for improving the technical performance of some starches, but the feasibility of its use for sweet potato starch remains unknown. The effects of aqueous ozonation on the multi-scale structure and physicochemical properties of sweet potato starch were explored. Structurally, ozonation did not generate significant alterations at the granular level (size, morphology, lamellar structure, and long-range and short-range ordered structures), but led to tremendous changes at the molecular level, including converting hydroxyl groups to carbonyl and carboxyl groups and depolymerizing starch molecules. These structural changes resulted in prominent alternations in the technological performance of sweet potato starch, such as increases in water solubility and paste clarity and decreases in water absorption capacity, paste viscosity, and paste viscoelasticity. For these traits, their amplitudes of variation elevated when the ozonation time was extended and peaked at the longest ozonation time (60 min). The greatest changes in paste setback (30 min), gel hardness (30 min), and the puffing capacity of the dried starch gel (45 min) were observed at moderate ozonation times. In summary, aqueous ozonation is a new method for fabricating sweet potato starch with improved functionality.

Effect of Calcium Hydroxide on Physicochemical and In Vitro Digestibility Properties of Tartary Buckwheat Starch-Rutin Complex Prepared by Pre-Gelatinization and Co-Gelatinization Methods

This study examined the effect of calcium hydroxide (Ca(OH)₂, 0.6%, w/w) on structural, physicochemical and in vitro digestibility properties of the complexed system of Tartary buckwheat starch (TBS) and rutin (10%, w/w). The pre-gelatinization and co-gelatinization methods were also compared. SEM results showed that the presence of Ca(OH)₂ promoted the connection and further strengthened the pore wall of the three-dimensional network structure of the gelatinized and retrograded TBS-rutin complex, indicating the complex possessed a more stable structure with the presence of Ca(OH)₂, which were also confirmed by the results of textural analysis and TGA. Additionally, Ca(OH)₂ reduced relative crystallinity (RC), degree of order (DO) and enthalpy, inhibiting their increase during storage, thereby retarding the regeneration of the TBS-rutin complex. A higher storage modulus (G') value was observed in the complexes when Ca(OH)₂ was added. Results of in vitro digestion revealed that Ca(OH)₂ retarded the hydrolysis of the complex, resulting in an increase in values in slow-digestible starch and resistant starch (RS). Compared with pre-gelatinization, the complex process prepared with the co-gelatinization method presented lower RC, DO, enthalpy, and higher RS. The present work indicates the potential beneficial effect of Ca(OH)₂ during the preparation of starch-polyphenol complex and would be helpful to reveal the mechanism of Ca(OH)₂ on improving the quality of rutin riched Tartary buckwheat products.

Effect of autoclave-cooling cycles combined pullulanase on the physicochemical and structural properties of resistant starch from black Tartary buckwheat

A starch-rich portion is produced as a by-product of black Tartary buckwheat processing. The effect of enzymatic combined with autoclaving-cooling cycles (one, two, or three times) on the physicochemical and structural properties of black Tartary buckwheat type 3 resistant starch (BRS) was evaluated. The autoclaving-cooling cycles enhanced solubility and reduced swelling, with the BRS content increasing from 14.12% to 25.18%. The high crystallinity of the BRS reflected a high molecular order. However, increasing the number of autoclaving-cooling cycles did not result in higher BRS content. The highest BRS yield in the autoclaved starch samples was 25.18% after double-autoclaving-cooling cycles. Furthermore, the autoclaving-cooling cycles altered the crystalline structure of black Tartary buckwheat, and the subsequent crystallinity changed from 36.33% to 42.05% to 38.27%. Fourier-transform infrared spectroscopy shows that the number of cycles results in more efficient double-helical packing within the crystalline lamella. Principal component analysis showed that the autoclaving-cooling cycle treatment leads to significant changes in the molecular structure of resistant starch (RS). These results indicated that autoclaving-cooling cycles might be a feasible way for producing RS from black Tartary buckwheat starch with better structural stability to expand their application range.

Gallic acid-fortified buckwheat Wantuo: characteristics of in vitro starch digestibility, antioxidant and eating quality

Gallic acid (GA), presented in various plant sources, is increasingly used as a nutritional food ingredient due to its prominent bioactive. In this work, common buckwheat Wantuo (BWT, a Chinese traditional starch gel food) was fortified with 1,3,5% (w/w) GA and assessed for physicochemical properties of flour as well as in vitro starch digestibility, antioxidant and eating quality of BWT. The results clearly showed that the hydration, pasting properties as well as gel microstructure and texture of gel were influenced with addition of GA, while the color of flours showed no significantly change. Hydrogen bonds interaction between GA and starch, more hydrophilic groups exposure and more acid hydrolysis of the starch were thought to be main reasons. Furthermore, combined with structural analysis of starch, the significantly decreased rapidly digested starch (8.62%)/slowly digested starch (12.90%) and increased resistant starch (78.48%) in BWT with 5% addition amount can be mainly due to digestive enzymes inhibition, formation of V-type conformation and alteration in the local structure of starch-phenol-enzyme complex. Meanwhile, the antioxidant activity of BWT-GA improved, where as its texture properties softened due to suppressed starch retrogradation. This study demonstrated the potential use of polyphenol as food ingredient to improve the nutritional properties and eating qualities of starch gel food.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-022-05614-x.

Effect of Ozone Treatment Intensity on Pasting Property, Protein Composition, and Steamed Bread Quality of Ozone-Treated Wheat Flour

Wheat flours were treated with ozone gas at low- and high-intensity conditions (0.61 and 3.82 g/h) for different durations (short: 5 min; long: 30 min), and the ozone-treated flours were evaluated in quality properties, including pH, protein component, water molecular mobility of dough, pasting property, and steamed bread quality. At both conditions, ozone treatment decreased the pH of wheat flour. Long duration of high-intensity treatment aroused significant increase in insoluble polymeric protein (IPP) content of wheat flour, but other treatments did not significantly change the IPP content. Dough of ozone-treated flour had higher water molecular mobility than that of native flour. Short duration of low-intensity treatment did not significantly change most pasting viscosity parameters of wheat flour, but other treatments increased the peak viscosity, breakdown viscosity, and setback viscosity. Steamed bread of ozone-treated flour had lower specific volume and pore uniformity than that of native flour. Long duration of high-intensity treatment of flour increased the hardness and chewiness of the steamed bread product, but other treatment showed opposite effect. Among the four ozone treatments, long duration of high-intensity treatment aroused the greatest change in pH, IPP, water molecular mobility of dough, and the quality of steamed bread, while short duration of low-intensity treatment had the minimum effect. Long duration of low-intensity treatment was close to the short duration of high-intensity treatment in quality attributes of wheat flour and the total ozone yield. These results suggested that the quality of wheat flour gradually changed with the increase of total ozone yield, and overozonization would greatly deteriorate the quality of wheat flour.

Cold plasma: a promising technology for improving the rheological characteristics of food

At the beginning of the 21st century, many consumers show interest in purchasing safe, healthy, and nutritious foods. The intent requirement of end-users and many food product manufacturers are trying to feature a new processing technique for the healthy food supply. The non-thermal nature of cold plasma treatment is one of the leading breakthrough technologies for several food processing applications. The beneficial response of cold plasma processing on food quality characteristics is widely accepted as a substitution technique for new food manufacturing practices. This review aims to elaborate and offer crispy innovative ideas on cold plasma application in various food processing channels. It highlights the scientific approaches on the principle of generation and mechanism of cold plasma treatment on rheological properties of foods. It provides an overview of the behavior of cold plasma in terms of viscosity, crystallization, gelatinization, shear stress, and shear rate. Research reports highlighted that the cold plasma treated samples demonstrated a pseudoplastic behavior. The published literatures indicated that the cold plasma is a potential technology for modification of native starch to obtain desirable rheological properties. The adaptability and environmentally friendly nature of non-thermal cold plasma processing provide exclusive advantages compared to the traditional processing technique.