Structurally stable sustained-release microcapsules stabilized by self-assembly of pectin-chitosan-collagen in aqueous two-phase system

Exploring the potential of all-aqueous immiscible systems for preparing complex biomaterials and cellular constructs

All-aqueous immiscible systems derived from liquid-liquid phase separation of incompatible hydrophilic agents such as polymers and salts have found increasing interest in the biomedical and tissue engineering fields in the last few years. The unique characteristics of aqueous interfaces, namely their low interfacial tension and elevated permeability, as well as the non-toxic environment and high water content of the immiscible phases, confer to these systems optimal qualities for the development of biomaterials such as hydrogels and soft membranes, as well as for the preparation of in vitro tissues derived from cellular assembly. Here, we overview the main properties of these systems and present a critical review of recent strategies that have been used for the development of biomaterials with increased levels of complexity using all-aqueous immiscible phases and interfaces, and their potential as cell-confining environments for micropatterning approaches and the bioengineering of cell-rich structures. Importantly, due to the relatively recent emergence of these areas, several key design considerations are presented, in order to guide researchers in the field. Finally, the main present challenges, future directions, and adaptability to develop advanced materials with increased biomimicry and new potential applications are briefly evaluated.

Targeted delivery of 5-fluorouracil and shikonin by blended and coated chitosan/pectin nanoparticles for treatment of colon cancer

Herein, 5-fluorouracil and shikonin (extracted from Fusarium tricinctum) were loaded in chitosan/pectin nanoparticle (CS/PEC-NPs), prepared by blending (B-CS/PEC-NPs) and coating (C-CS/PEC-NPs) methods. The nanoparticles characterized by Fourier Transform Infrared (FTIR), X-ray diffraction (XRD), Energy-dispersive X-ray (EDX), Scanning Electron Microscope (SEM) and Differential Light Scattering (DLS). Then, some properties of the nanoparticles such as drug release rate and the nanoparticles cytotoxicity were studied. The FTIR, XRD, EDX, SEM and DLS results showed that the nanoparticles synthesized properly with an almost spherical morphology, an average size of 82-93 nm for B-CS/PEC-NPs, an average diameter of below 100 nm (mostly 66-89 nm) for C-CS/PEC-NPs, and hydrodynamic diameter of 310-817 nm. The drug release results indicated the lower release rate of drugs for B-CS/PEC-NPs relative to C-CS/PEC-NPs at different pHs, high release rate of drugs for the nanoparticles in the simulated large intestinal fluids containing pectinase, and Korsmeyer-Peppas model for release of the drugs. The results showed more cytotoxicity of B-CS/PEC-NPs containing drugs, especially B-CS/PEC-NPs containing both drugs (B-CS/PEC/5-FU/SHK-NPs) after treating with pectinase (IC50 of 18.6 μg/mL). In conclusion, despite the limitation of C-CS/PEC-NPs for simultaneous loading of hydrophilic and hydrophobic drugs, B-CS/PEC-NPs showed suitable potency for loading and targeted delivery of the drugs.

Preparation and Characterization of a Hypoglycemic Complex of Gallic Acid-Antarctic Krill Polypeptide Based on Polylactic Acid-Hydroxyacetic Acid (PLGA) and High-Pressure Microjet Microencapsulation

Gallic acid-Antarctic krill peptides (GA-AKP) nanocapsules (GA-AKP-Ns) were prepared using a dual delivery system with complex emulsion as the technical method, a high-pressure microjet as the technical means, polylactic acid-hydroxyacetic acid (PLGA) as the drug delivery vehicle, and GA-AKP as the raw material for delivery. This study aimed to investigate the effects of microjet treatment and the concentration of PLGA on the physicochemical properties and stability of the emulsion. Under optimal conditions, the physicochemical properties and hypoglycemic function of nano-microcapsules prepared after lyophilization by the solvent evaporation method were analyzed. Through the microjet treatment, the particle size of the emulsion was reduced, the stability of the emulsion was improved, and the encapsulation rate of GA-AKP was increased. The PLGA at low concentrations decreased the particle size of the emulsion, while PLGA at high concentrations enhanced the encapsulation efficiency of the emulsion. Additionally, favorable results were obtained for emulsion preparation through high-pressure microjet treatment. After three treatment cycles with a PLGA concentration of 20 mg/mL and a microjet pressure of 150 MPa (manometric pressure), the emulsion displayed the smallest particle size (285.1 ± 3.0 nm), the highest encapsulation rates of GA (71.5%) and AKP (85.2%), and optimal physical stability. GA-AKP was uniformly embedded in capsules, which can be slowly released in in vitro environments, and effectively inhibited α-amylase, α-glucosidase, and DPP-IV at different storage temperatures. This study demonstrated that PLGA as a carrier combined with microjet technology can produce excellent microcapsules, especially nano-microcapsules, and these microcapsules effectively improve the bioavailability and effectiveness of bioactive ingredients.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Emerging delivery systems based on aqueous two-phase systems: A review

The aqueous two-phase system (ATPS) is an all-aqueous system fabricated from two immiscible aqueous phases. It is spontaneously assembled through physical liquid-liquid phase separation (LLPS) and can create suitable templates like the multicompartment of the intracellular environment. Delicate structures containing multiple compartments make it possible to endow materials with advanced functions. Due to the properties of ATPSs, ATPS-based drug delivery systems exhibit excellent biocompatibility, extraordinary loading efficiency, and intelligently controlled content release, which are particularly advantageous for delivering drugs in vivo . Therefore, we will systematically review and evaluate ATPSs as an ideal drug delivery system. Based on the basic mechanisms and influencing factors in forming ATPSs, the transformation of ATPSs into valuable biomaterials is described. Afterward, we concentrate on the most recent cutting-edge research on ATPS-based delivery systems. Finally, the potential for further collaborations between ATPS-based drug-carrying biomaterials and disease diagnosis and treatment is also explored.

Recent progress in the synthesis of all-aqueous two-phase droplets using microfluidic approaches

An aqueous two-phase system (ATPS) is a system with liquid-liquid phase separation and shows great potential for the extraction, separation, purification, and enrichment of proteins, membranes, viruses, enzymes, nucleic acids, and other biomolecules because of its simplicity, biocompatibility, and wide applicability [1-4]. The clear aqueous-aqueous interface of ATPSs is highly advantageous for their implementation, therefore making ATPSs a green alternative approach to replace conventional emulsion systems, such as water-in-oil droplets. All aqueous emulsions (water-in-water, w-in-w) hold great promise in the biomedical field as glucose sensors [5] and promising carriers for the encapsulation and release of various biomolecules and nonbiomolecules [6-10]. However, the ultralow interfacial tension between the two phases is a hurdle in generating w-in-w emulsion droplets. In the past, bulk emulsification and electrospray techniques were employed for the generation of w-in-w emulsion droplets and the fabrication of microparticles and microcapsules in the later stage. Bulk emulsification is a simple and low-cost technique; however, it generates polydisperse w-in-w emulsion droplets. Another technique, electrospray, involves easy experimental setups that can generate monodisperse but nonspherical w-in-w emulsion droplets. In comparison, microfluidic platforms provide monodisperse w-in-w emulsion droplets with spherical shapes, deal with the small volumes of solutions and short reaction times and achieve portability and versatility in their design through rapid prototyping. Owing to several advantages, microfluidic approaches have recently been introduced. To date, several different strategies have been explored to generate w-in-w emulsions and multiple w-in-w emulsions and to fabricate microparticles and microcapsules using conventional microfluidic devices. Although a few review articles on ATPSs emulsions have been published in the past, to date, few reviews have exclusively focused on the evolution of microfluidic-based ATPS droplets. The present review begins with a brief discussion of the history of ATPSs and their fundamentals, which is followed by an account chronicling the integration of microfluidic devices with ATPSs to generate w-in-w emulsion droplets. Furthermore, the stabilization strategies of w-in-w emulsion droplets and microfluidic fabrication of microparticles and microcapsules for modern applications, such as biomolecule encapsulation and spheroid construction, are discussed in detail in this review. We believe that the present review will provide useful information to not only new entrants in the microfluidic community wanting to appreciate the findings of the field but also existing researchers wanting to keep themselves updated on progress in the field.

Modeling of in vitro drug release from polymeric microparticle carriers

Incorporation of active substances in polymeric microparticles (microencapsulation) is an important technological strategy used in the pharmaceutical industry to improve the functionality, quality, safety and/or therapeutic efficiency of pharmaceutical preparations for different routes of administration. The current focus of research in this field is on the encapsulation of small molecules and macromolecules into microparticles based on biocompatible synthetic polymers and biopolymers, such as polypeptides and polysaccharides, in order to achieve preferable drug release kinetics and many other advantages. Diversity in the structure and size of microparticles, choice of polymers, and manufacturing processes, allows for designing a multitude of microcarriers (e.g., monolithic matrix microspheres, hollow microcapsules, water-or oil-core microcapsules, stimulus-sensitive microcapsules), whereby their impact on biopharmaceutical profile of drugs can be manipulated. The results so far indicate that the in vitro drug release kinetics evaluation is one of the key aspects of the microparticle-type carrier characterization, where the application of the mathematical analysis (modeling) of the drug release profiles is an important tool for elucidating drug release mechanisms, as well as for evaluating the influence and optimization of formulation and process parameters in the microencapsulation procedure. The article reviews representative studies in which mathematical modeling of experimentally obtained release data was performed for microencapsulated model drugs with different physicochemical properties, as well as the relevance and potential limitations of this approach.