Carbohydrate-based functional ingredients derived from starch: Current status and future prospects

Effect of four highland barley proteins on the retrogradation and in vitro digestion properties of highland barley starch

This study evaluated the effects of four highland barley proteins (HBPs), namely albumin, globulin, gliadin and glutenin, on the retrogradation and in vitro digestion properties of highland barley starch (HBS). The results showed globulin had the most significant effect on inhibiting short-term retrogradation of HBS, which was reflected in the reduction of G' and G". Compare with HBS, four HBPs could significantly inhibit long-term recrystallization process. For albumin, globulin, gliadin and glutenin, the degree of retrogradation reduced from 51.55 % to 48.20 %, 35.06 %, 42.22 % and 32.63 %, respectively, which was reflected in the decrease of water migration rate, crystal enthalpy, crystallinity and short-range order. It could be found that glutenin had the most significant effect on inhibiting long-term retrogradation of HBS. Moreover, the anti-digestion properties of retrograded HBS with HBPs intervention significantly increased, with glutenin most significantly. Compared with HBS, resistant starch (RS) content increased by 59.76 % at 28 d of retrogradation.

Structural and rheological characterization of starch-based eutecto-oleogel

The study aimed to develop a novel eutecto-oleogel and its characterizations. Using starch, beeswax, oil, and natural deep eutectic solvents (NADES), an oleogel with low hardness and high liquid fat was developed. The addition of starch and NADES in oleogels caused the formation of new intra or intermolecular hydrogen bonding and improved the oil binding capacity, thermal behavior, and texture of the oleogels. The oleogel with 1 % starch formed a strong gel with the most favorable functional, textural, flow properties and a high fanning factor. Complementary tests of the oleogel exhibited shear thinning and frequency-independent behavior, with zero residual effect. Non-isothermal crystallization and melting analysis of the oleogels showed noticeable differences among the various oleogels. These results contribute to a better understanding of oleo gelation in rice bran oil-based oleogels with NADES, and beeswax for formulating food, pharmaceutical, and personal care products with desired physical properties.

A multihole nozzle controls recrystallization of high-moisture extruded maize starches: Effect of cooling die temperature

Hot extrusion is utilized for starch modification due to its high mechanical input and product output. Amylose recrystallization commences and primarily depends on intermolecular interactions after conventional extrusion. Hence, the design of a new component based on the existed extrusion system was aimed at facilitating molecular aggregation, potentially accelerating starch recrystallization. In this study, a nozzle sheet comprising 89 holes was integrated into the cooling die. The impact of the multihole nozzle on the structure and in vitro digestibility of extruded maize starches after retrogradation was examined at varying cooling die temperatures. The results showed that the nozzle-assembled extrusion system operated effectively without additional mechanical or yield losses. At 50 °C, the crystallinity of nozzle-produced starch was approximately 70 % higher than that of conventionally extruded starch, predominantly owing to the B-type allomorph of the amylose double helix. Recrystallized amylopectin was also found in these nozzle-produced starches, indicating that multihole nozzle-induced uniaxial elongational flow resulted in the rapid starch crystallization. The increased formation of recrystallized amylose led to improved molecular order in starch structures while reducing their digestibility. These findings revealed a new approach to improve starch crystallinity by incorporating a nozzle sheet in the extrusion process.

Advancements in application of chitosan and cyclodextrins in biomedicine and pharmaceutics: recent progress and future trends

The global community is faced with numerous health concerns such as cancer, cardiovascular and neurological diseases, diabetes, joint pain, osteoporosis, among others. With the advancement of research in the fields of materials chemistry and medicine, pharmaceutical technology and biomedical analysis have entered a new stage of development. The utilization of natural oligosaccharides and polysaccharides in pharmaceutical/biomedical studies has gained significant attention. Over the past decade, several studies have shown that chitosan and cyclodextrin have promising biomedical implications in background analysis, ongoing development, and critical applications in biomedical and pharmaceutical research fields. This review introduces different types of saccharides/natural biopolymers such as chitosan and cyclodextrin and discusses their wide-ranging applications in the biomedical/pharmaceutical research area. Recent research advances in pharmaceutics and drug delivery based on cyclodextrin, and their response to smart stimuli, as well as the biological functions of cyclodextrin and chitosan, such as the immunomodulatory effects, antioxidant, and antibacterial properties, have also been discussed, along with their applications in tissue engineering, wound dressing, and drug delivery systems. Finally, the innovative applications of chitosan and cyclodextrin in the pharmaceutical/biomedicine were reviewed, and current challenges, research/technological gaps, and future development opportunities were surveyed.

Structure and functional characteristics of starch from different hulled oats cultivated in China

This work aimed to evaluate the structure and functional characteristics of starch from ten hulled oat cultivars grown in different locations in China. The protein, phosphorus, amylose, and starch contents were 0.2-0.4 %, 475.7-691.8 ppm, 16.2-23.0 %, and 93.6-96.7 %, respectively. All the starches showed irregular polygonal shapes and A-type crystallization with molecular weights ranging from 7.2 × 107 to 4.5 × 108 g/mol. The amounts of amylopectin A (DP 6-12), B1 (DP 13-24), B2 (DP 25-36), and B3 (DP > 36) chains were in the ranges of 10.3-16.0 %, 54.5-64.8 %, 16.5-21.1 %, and 4.9-13.1 %, respectively. The starches differed significantly in gelatinization temperatures, pasting viscosity, solubility, swelling power, rheological properties, and digestion parameters. The results revealed that the larger particle size could increase the peak viscosity of the starch paste. The presence of phosphorus increased the gelatinization temperature and enhanced the resistant starch content. The starch granules with higher crystallinity contained a higher proportion of phosphate, which increased final viscosity and setback viscosity but decreased rapidly digestible starch. Overall, oat starch with a high phosphorus content could be used to prepare low-glycemic-index food for diabetes patients.

Isolation, characterization, and cloning of thermostable pullulanase from Geobacillus stearothermophilus ADM-11

This study aimed to identify thermo-stable pullulanase-producing bacteria in soil samples of potato fields and food-producing companies. Pullulan agar medium was used to screen 17 bacterial strains, which were incubated at 65 °C. The isolate with the maximum activity (375U/ml) was selected and recognized as Geobacillus stearothermophilus ADM-11 by morphological, biochemical characterization, and 16S rRNA gene sequencing. The pullulanase production required optimum pH of 7 and temperature of 75 °C, respectively. The electrophoresis of purified pullulanase on SDS-polyacrylamide gel revealed 83 kDa of a molecular weight that is active at 70 °C and pH 7.0. It was also stable at 90 °C but its activity was decreased by 10 % at 100 °C. The action of pullulanase was increased and stabilized by Ca+2 among the metal ions. Beta and gamma-cyclodextrins inhibited enzyme activity while ethylenediaminetetraacetate (EDTA) and phenylmethylsulfonyl fluoride (PMSF) have no significant effect on pullulanase activity. A full-length pullulanase gene was amplified from G. stearothermophilus ADM-11 using genomic DNA 2.1 kb of PCR product which was then purified and ligated in the cloning vector pTZ57R using the TA cloning technique. Colony PCR confirmed cloning on the positive clones after the pullulanase gene had been ligated and subjected to restriction digestion. It revealed 74 % similarity with the reported pullulanase gene from Geobacillus sp. 44C. The thermostability of pullulanase and its ability to degrade raw pullulan may therefore have wide-scale applications in starch processing, the detergent business, and new biotechnological applications.

Production and characterization of starch-lignin based materials: A review

In their pristine state, starch and lignin are abundant and inexpensive natural polymers frequently considered green alternatives to oil-based and synthetic polymers. Despite their availability and owing to their physicochemical properties; starch and lignin are not often utilized in their pristine forms for high-performance applications. Generally, chemical and physical modifications transform them into starch- and lignin-based materials with broadened properties and functionality. In the last decade, the combination of starch and lignin for producing reinforced materials has gained significant attention. The reinforcing of starch matrices with lignin has received primary focus because of the enhanced water sensitivity, UV protection, and mechanical and thermal resistance that lignin introduces to starch-based materials. This review paper aims to assess starch-lignin materials' production and characterization technologies, highlighting their physicochemical properties, outcomes, challenges, and opportunities. First, this paper describes the current status, sources, and chemical modifications of lignin and starch. Next, the discussion is oriented toward starch-lignin materials and their production approaches, such as blends, composites, plasticized/crosslinked films, and coupled polymers. Special attention is given to the characterization methods of starch-lignin materials, focusing on their advantages, disadvantages, and expected outcomes. Finally, the challenges, opportunities, and future perspectives in developing starch-lignin materials, such as adhesives, coatings, films, and controlled delivery systems, are discussed.

Exploring the diverse applications of Carbohydrate macromolecules in food, pharmaceutical, and environmental technologies

Carbohydrates are a class of macromolecules that has significant potential across several domains, including the organisation of genetic material, provision of structural support, and facilitation of defence mechanisms against invasion. Their molecular diversity enables a vast array of essential functions, such as energy storage, immunological signalling, and the modification of food texture and consistency. Due to their rheological characteristics, solubility, sweetness, hygroscopicity, ability to prevent crystallization, flavour encapsulation, and coating capabilities, carbohydrates are useful in food products. Carbohydrates hold potential for the future of therapeutic development due to their important role in sustained drug release, drug targeting, immune antigens, and adjuvants. Bio-based packaging provides an emerging phase of materials that offer biodegradability and biocompatibility, serving as a substitute for traditional non-biodegradable polymers used as coatings on paper. Blending polyhydroxyalkanoates (PHA) with carbohydrate biopolymers, such as starch, cellulose, polylactic acid, etc., reduces the undesirable qualities of PHA, such as crystallinity and brittleness, and enhances the PHA's properties in addition to minimizing manufacturing costs. Carbohydrate-based biopolymeric nanoparticles are a viable and cost-effective way to boost agricultural yields, which is crucial for the increasing global population. The use of biopolymeric nanoparticles derived from carbohydrates is a potential and economically viable approach to enhance the quality and quantity of agricultural harvests, which is of utmost importance given the developing global population. The carbohydrate biopolymers may play in plant protection against pathogenic fungi by inhibiting spore germination and mycelial growth, may act as effective elicitors inducing the plant immune system to cope with pathogens. Furthermore, they can be utilised as carriers in controlled-release formulations of agrochemicals or other active ingredients, offering an alternative approach to conventional fungicides. It is expected that this review provides an extensive summary of the application of carbohydrates in the realms of food, pharmaceuticals, and environment.

Mechanisms of rice protein hydrolysate regulating the in vitro digestibility of rice starch under extrusion treatment in terms of structure, physicochemical properties and interactions

The effect of protein hydrolysates on starch digestibility has been observed in other heat treatments but has yet to be extensively researched under extrusion. This study aimed to analyze the physicochemical properties, structure, and starch digestibility of extruded rice starch-protein hydrolysate (ERS-RPH) complexes prepared by extrusion treatment. The resistant starch contents of ERS-RPH (12.30 %-19.36 %) were higher than those of extruded starch alone (6.33 %). The interaction forces, physical barrier effects, and enzyme inhibition indicated that RPHs at varying hydrolysis degrees hindered starch digestibility by reducing its contact with enzyme and via adhesion and hydrogen bonding with starch. RPHs with higher hydrolysis exhibited greater inhibition of starch digestibility, limiting the swelling power of starch and the leaching of amylose, thereby improving the thermal stability of starch. Fourier transform infrared spectroscopy results revealed the presence of hydrogen bonding interactions between RPHs and starch in complexes, intensifying the ordered structure of starch. Extrusion caused an increase of 6.8 %-10.8 % in the relative crystallinity of ERS-RPH compared to extruded starch alone. Moreover, the strength of V-type structure was reinforced after extrusion. These results enhanced comprehension of how PRHs regulate starch digestibility under extrusion, and offer direction for producing slow-digesting foods.

Characterization, health benefits, and food applications of enzymatic digestion- resistant dextrin: A review

Resistant dextrin or resistant maltodextrin (RD), a short-chain glucose polymer that is highly resistant to hydrolysis by human digestive enzymes, has shown broad developmental prospects in the food industry and has gained substantial attention owing to its lack of undesirable effects on the sensory features of food or the digestive system. However, comprehensive fundamental and application information on RD and how RD improves anti-diabetes and obesity have not yet been received. Therefore, the characterization, health benefits and application of RD in various fields are summarized and discussed in the current study. Typically, RD is prepared by the acid thermal method and possesses excellent physicochemical properties, including low viscosity, high solubility, storage stability, and low retro-gradation, which are correlated with its low molecular weight (Mw) and non-digestible glycosidic linkages. In contrast, RD prepared by the simultaneous debranching and crystallization method has low solubility and high crystallinity. The ingestion of RD can positively affect metabolic diseases (diabetes and obesity) in animals and humans by producing short-chain fatty acids (SCFAs), and facilitating the inflammatory response. Moreover, RD has been widely used in the beverage, dairy products, and dessert industries due to its nutritional value and textural properties without unacceptable quality loss. More studies are required to further explore RD application potential in the food industry and its role in the management of different chronic metabolic disorders.

Preparation of Bovine Hides Gelatin by Ultra-High Pressure Technique and the Effect of Its Replacement Fat on the Quality and In Vitro Digestion of Beef Patties

Beef skin gelatin can be used as a good substitute for animal fat in meat patties. In this paper, the effect of different parameters on low-fat beef patties with cowhide gelatin substituted for beef fat (0, 25%, 50%, 75%, 100%) prepared by ultra-high pressure assisted technology was investigated by texture, cooking loss, and sensory scores. The beef patties were also stored at 0-4 °C for 0, 7, 14, 21, and 28 d. The differences and changing rules of fatty acid and amino acid compositions and contents of beef patties with different fat contents were investigated by simulating gastrointestinal digestion in vitro. The optimal process formulation of low-fat beef patties with cowhide gelatin was determined by experimental optimization as follows: ultra-high pressure 360 MPa, ultra-high of pressure time of 21 min, NaCl addition of 1.5%, compound phosphate addition of 0.3%. The addition of cowhide gelatin significantly increased monounsaturated fatty acids, polyunsaturated fatty acids, amino acid content, and protein digestibility of beef patties (p < 0.05). Moreover, with the extension of storage time, the content of saturated fatty acids was significantly higher (p < 0.05), the content of monounsaturated and polyunsaturated fatty acids was significantly lower (p < 0.05), the content of amino acids was significantly lower (p < 0.05), and protein digestibility was significantly lower (p < 0.05) under all substitution ratios. Overall, beef patties with 75% and 100% substitution ratios had better digestibility characteristics. The results of this study provide a theoretical basis for gelatin's potential as a fat substitute for beef patties and for improving the quality of low-fat meat products.

Structural characterization of slow digestion dextrin synthesized by a combination of α-glucosidase and cyclodextrin glucosyltransferase and its prebiotic potential on the gut microbiota in vitro

Starch-based dietary fibers are at the forefront of functional ingredient research. In this study, a novel water-soluble slow digestion dextrin (SDD) was synthesized by synergy of α-glucosidase and cyclodextrin glucosyltransferase and characterized. Results showed that SDD exhibited high solubility, low viscosity, and resistance to digestive enzymes, and also showed an increased dietary fiber content of 45.7% compared with that of α-glucosidase catalysis alone. Furthermore, SDD was used as the sole carbon source to ferment selected intestinal strains and human fecal microflora in vitro to investigate its prebiotic effects. It was found that SDD could markedly enriched the abundance of Bifidobacterium, Veillonella, Dialister, and Blautia in human gut microflora and yielded higher total organic acid. The combination of α-glucosidase and cyclodextrin glucosyltransferase in this study showed valuable potential for the preparation of a novel slow digestion dextrin with good physicochemical properties and improved prebiotic effects.

Carbohydrate polymer-based nanocomposites for breast cancer treatment

Breast cancer is known as the most common invasive malignancy in women with the highest mortality rate worldwide. This concerning disease may be presented in situ (relatively easier treatment) or be invasive, especially invasive ductal carcinoma which is highly worrisome nowadays. Among several strategies used in breast cancer treatment, nanotechnology-based targeted therapy is currently being investigated, as it depicts advanced technological features able of preventing drugs' side effects on normal cells while effectively acting on tumor cells. In this context, carbohydrate polymer-based nanocomposites have gained particular interest among the biomedical community for breast cancer therapy applications due to their advantage features, including abundance in nature, biocompatibility, straightforward fabrication methods, and good physicochemical properties. In this review, the physicochemical properties and biological activities of carbohydrate polymers and their derivate nanocomposites were discussed. Then, various methods for the fabrication of carbohydrate polymer-based nanocomposites as well as their application in breast cancer therapy and future perspectives were discussed.

Physicochemical properties and in vitro digestibility of highland barley starch with different extraction methods

The objective of this study was to compare the structural, thermal, rheological and digestive properties of highland barley starch (HBS) by different extraction methods. Five techniques were used to extract HBS: Alkali extraction, Ultrasound extraction, double enzyme extraction (DE), three enzyme extraction (TE) and ultrasonic assisted TE (U-TE). The results indicated that the Ultrasound extracted HBS had fewer Maltese crosses, lower molecular weight (Mw), and higher content of damaged starch (P < 0.05). Meanwhile, DE extracted HBS had higher Mw, and the content of short amylopectin than that of Alkali extracted HBS (P < 0.05). Additionally, the DE extracted HBS showed the highest relative crystallinity and good short-range ordered structure, which led to the outcome of stronger thermal stability and higher values of G' and G'' (P < 0.05). These results indicated that enzymatic extraction could better protect the resistance of HBS by protecting its physicochemical properties.

Effects of rice protein, soy isolate protein, and whey concentrate protein on the digestibility and physicochemical properties of extruded rice starch

Protein, as the second major component in starchy foods, is crucial for its influence on the physicochemical properties and digestibility of starch. However, the effect of different sources of protein on starch digestibility is still unclear. In this paper, the effects of different sources of proteins (rice protein: RP, soybean isolate protein: SPI, and whey concentrate protein: WPC) on structural features, digestibility, and enzyme activity of extruded rice starch were investigated. The addition of all three proteins reduced the starch digestibility of extrudates. Native SPI and WPC suppressed amyloglucosidase activity, and all three proteins exhibited stronger amyloglucosidase inhibition when hydrolyzed. The rheological properties and Fourier transform infrared spectroscopy results revealed the exogenous proteins and starch interacted through non-covalent bonds and improved the ordered structures in the extrudates. The extrusion process also facilitated the formation of a V-type structure. The sum of SDS and RS content of extrudates was negatively correlated with the content of leached amylose and positively correlated with the ratio of 1047/1022 cm^-1 . These findings suggest that the inclusion of exogenous proteins during extrusion can affect starch digestibility through mechanisms such as the interaction with starch molecules, as well as the inhibition of amylase activity. PRACTICAL APPLICATION: This result indicated that the addition of protein during extrusion not only increased the nutritional value of the extrudate, but also decreased the starch digestibility. Extrusion technology can efficiently produce extruded products with protein, expanding further applications of protein in food and providing new healthy staple food options for special populations, such as diabetic and overweight people.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Polyphenol-Modified Starches and Their Applications in the Food Industry: Recent Updates and Future Directions

Health problems associated with excess calories, such as diabetes and obesity, have become serious public issues worldwide. Innovative methods are needed to reduce food caloric impact without negatively affecting sensory properties. The interaction between starch and phenolic compounds has presented a positive impact on health and has been applied to various aspects of food. In particular, an interaction between polyphenols and starch is widely found in food systems and may endow foods with several unique properties and functional effects. This review summarizes knowledge of the interaction between polyphenols and starch accumulated over the past decade. It discusses changes in the physicochemical properties, in vitro digestibility, prebiotic properties, and antioxidant activity of the starch-polyphenol complex. It also reviews innovative methods of obtaining the complexes and their applications in the food industry. For a brief description, phenolic compounds interact with starch through covalent or non-covalent bonds. The smoothness of starch granules disappears after complexation, while the crystalline structure either remains unchanged or forms a new structure and/or V-type complex. Polyphenols influence starch swelling power, solubility, pasting, and thermal properties; however, research remains limited regarding their effects on oil absorption and freeze-thaw stability. The interaction between starch and polyphenolic compounds could promote health and nutritional value by reducing starch digestion rate and enhancing bioavailability; as such, this review might provide a theoretical basis for the development of novel functional foods for the prevention and control of hyperglycemia. Further establishing a comprehensive understanding of starch-polyphenol complexes could improve their application in the food industry.