The correlation of wall material composition with flow characteristics and encapsulation behavior of fish oil emulsion

Recent Advances in the Microencapsulation of Essential Oils, Lipids, and Compound Lipids through Spray Drying: A Review

In recent decades, the microcapsules of lipids, compound lipids, and essential oils, have found numerous potential practical applications in food, textiles, agricultural products, as well as pharmaceuticals. This article discusses the encapsulation of fat-soluble vitamins, essential oils, polyunsaturated fatty acids, and structured lipids. Consequently, the compiled information establishes the criteria to better select encapsulating agents as well as combinations of encapsulating agents best suited to the types of active ingredient to be encapsulated. This review shows a trend towards applications in food and pharmacology as well as the increase in research related to microencapsulation by the spray drying of vitamins A and E, as well as fish oil, thanks to its contribution of omega 3 and omega 6. There is also an increase in articles in which spray drying is combined with other encapsulation techniques, or modifications to the conventional spray drying system.

Fortification of chocolate with microencapsulated fish oil: Effect of protein wall material on physicochemical properties of microcapsules and chocolate matrix

Protein stabilized fish oil microcapsules were incorporated into chocolates in order to design fortified product which could bear the nutritional claim "source of or high omega-3 fatty acids". Protein wall material (soy, whey and potato) influenced microcapsules and chocolate performance. Soy protein resulted in the smallest microcapsules with the lowest content of surface oil. Peroxide values were low even after 14 days of microcapsules storage. Incorporation of microcapsules into chocolate led to increase in Casson viscosity and breaking force as well as decrease in melting enthalpy, due to prevalence of particle-particle over fat-fat interactions. Increase in microcapsules concentration resulted in chocolate with poorer snap and higher tendency to fat bloom formation. Whey protein microcapsules, having the largest diameter, resulted in chocolate with the lowest breaking force and melting enthalpy and the highest whitening index. In general, microcapsules addition did not require chocolate production modification and led to sensory acceptable product.

Spray drying encapsulation of essential oils; process efficiency, formulation strategies, and applications

Essential oils (EOs) have many beneficial qualities, including antimicrobial, antioxidant, antiviral, and antifungal activities, along with good aroma, which have played a significant role in pharmaceutical, textile, and food industries. However, their high volatility and sensibility to external factors, as well as susceptibility to deterioration caused by environmental and storage conditions, or even common processing, and consequently limited water solubility, makes it difficult to incorporate them into aqueous food matrices and limits their industrial application. Spray-drying encapsulation has been proposed as a solution and a challenging research field to retard oil oxidation, extend EO's shelf life, improve their physicochemical stability, achieve controlled release, suggest novel uses, and therefore boost their added value. The objective of this review is to discuss various used wall materials, infeed emulsion properties, the main formulation and process variables affecting the physicochemical properties and release characteristics of the EOs-loaded particles obtained by spray-drying, the stability of EOs during storage, and the applications of encapsulated EOs powders in foods and nutrition, pharmaceuticals, and textile industries. The current review also summarizes recent advances in spray drying approaches for improving encapsulation efficiency, flavor retention, controlled release, and applicability of encapsulated EOs, thereby expanding their use and functionalities.

Preparation, Morphology and Release of Goose Liver Oil Microcapsules

Goose liver oil (GLO) microcapsules were prepared by konjac glucomannan (KGM) and soybean protein isolate (SPI) for the first time as wall materials. The GLO could be effectively encapsulated, with an encapsulation efficiency of 83.37%, when the ratio of KGM to SPI was 2.9:1, the concentration of the KGM-SPI composite gel layer was 6.28% and the ratio of the GLO to KGM-SPI composite gel layer was 1:6. Fourier transform infrared spectroscopy and X-ray diffraction methods showed electrostatic interactions between KGM and SPI molecules and the formation of hydrogen bonds between the GLO and KGM-SPI wall components. The results of scanning electron microscopy showed a smooth spherical surface morphology of the microcapsules with a dense surface and no cracks. The confocal laser scanning microscopy showed that the microcapsules were homogeneous inside and no coalescence occurred. The encapsulated GLO has a significantly higher thermal and oxidative stability compared to free GLO. In the in vitro digestion experiment, 85.2% of the microcapsules could travel through gastric juice, and 75.2% could be released in the intestinal region. These results suggested that microcapsules prepared by KGM-SPI might be used as a carrier for the controlled release of GLO and could microencapsulate various oil-soluble nutrients in food products.

Fabrication and characterization of gum arabic- and maltodextrin-based microcapsules containing polyunsaturated oils

BACKGROUND

Polyunsaturated oils have various health-promoting effects, however, they are highly prone to oxidation. Encapsulation using biopolymers is one of the most effective strategies to enhance oil stability. This research examined the potential of gum arabic and maltodextrin for microencapsulation of omega-3 rich oils, aiming to enhance encapsulation efficiency and stability of encapsulated oil.

RESULTS

We encapsulated fish and flaxseed oils by emulsification-spray drying. Spray-dried microcapsules were prepared by oil-in-water emulsions consisting of 10 wt% oil and 30 wt% biopolymer (gum arabic, maltodextrin, or their mixture). Results showed that both microcapsules were spherical in shape with surface shrinkage, and exhibited amorphous structures. Gum arabic-based microcapsules had higher encapsulation efficiency as well as better storage stability for both types of oil. Flaxseed oil microcapsules generally had higher oxidative stability regardless of the type of wall material.

CONCLUSIONS

Through a comprehensive characterization of the physical and chemical properties of the emulsions and resulting microcapsules, we proved gum arabic to be a more effective wall material for polyunsaturated oil microencapsulation, especially flaxseed oil. This study provides a promising approach to stabilize oils which are susceptible to deterioration, and facilitates their wider uses as food and nutraceutical products. © 2021 Society of Chemical Industry.

Refined palm oil fractions: Effect of skim milk powder and maltodextrin on emulsion properties and microencapsulation by spray drying

The aim of this study was to investigate microencapsulation of palm oil fractions (palm olein (POL) and 90% palm olein+10% palm stearin (POS)) using skim milk powder (SMP) and maltodextrin (MD) by spray drying. Twenty-seven emulsions with POL were prepared to determine appropriate solid content (SC) and oil/coating material ratio (O/CM) of the emulsions to be fed into the spray dryer. Emulsion properties, such as viscosity and stability, were affected by SC and coating materials. The effects of coating materials used in microencapsulation of POL and POS were also tested by using different ratios of SMP and MD. The microencapsulation efficiency (69.28–84.97%), the microencapsulation yield (14.50–31.79%), and the peroxide value (4.12–7.07 meq O2/kg oil) of the powders were affected by the coating materials (P < 0.05).

Application of wool keratin: an anti-ultraviolet wall material in spray drying

Low-molecular-weight keratin (LMWK) obtained from wool was employed as a wall material for the spray drying encapsulation of fish oil. Microcapsules with different LMWK contents were prepared, and their anti-ultraviolet performance and other features were studied. The results showed that LMWK was able to improve the encapsulation efficiency of fish oil because of its good emulsifying properties. When the LMWK content was increased from 0 to 10, 30 and 50%, the shelf life of the microcapsules under ultraviolet irradiation increased from 48 to 96 h, 144 h and 168 h, respectively. The strongest absorption efficiency of LMWK is shown in the UVc band. The chemical structure of LMWK did not change during an ultraviolet accelerating ageing test.

In vitro bioaccessibility of fish oil-loaded hollow solid lipid micro- and nanoparticles

Fish oil-loaded hollow solid lipid micro- and nanoparticles were prepared by atomization of the CO2-expanded lipid mixture. The obtained particles were spherical and free-flowing with an average particle size of 6.9 μm. Fish oil loading efficiency was achieved at 92.3% (w/w). The in vitro digestive stability, lipid digestibility and EPA and DHA bioaccessibility of the fish oil-loaded particles were examined using an in vitro sequential digestion model. The mean particle diameter increased markedly after oral (15.2 μm) and gastric (32.4 μm) digestion and then decreased after the small intestinal stage (24.0 μm). Fish oil-loaded particles remained spherical and intact but mainly agglomerated on the top phase throughout the oral and gastric digestion. However, a mixed digesta was formed after the small intestinal digestion, which contained digested broken particle pieces, undigested fish oil-loaded particles, free fatty acids, monoacylglycerols and micelles. The extent of lipolysis was significantly increased for the 30% fish oil-loaded particles as compared to physical mixtures of empty hollow solid lipid particles or bulk FHSO and fish oil (p < 0.05). Moreover, EPA and DHA bioaccessibility was significantly improved from 9.7 to 18.2% with the 30% fish oil-loaded particles (p < 0.05).

Controlled release of microencapsulated docosahexaenoic acid (DHA) by spray-drying processing

The omega-3-fatty acid, docosahexaenoic acid (DHA) 22:6 n-3, is an important food component for the visual and brain development of infants. In this study two approaches have been explored for the encapsulation of DHA in the pH dependant polymer hydroxyl-propyl-methyl-cellulose-acetate-succinate (HPMCAS). In the first approach Direct Spray Drying (DSD) was implemented for the microencapsulation of DHA/HPMCAS organic solutions, whilst in the second approach solid lipid nanoparticle (SLN) dispersions of DHA, were first produced by high-pressure homogenization, prior to being spray dried in HPMCAS aqueous solutions. The DSD approach resulted in significantly higher quantities of DHA being encapsulated, at 2.09 g/100 g compared to 0.60 g/100 g in the spray-dried SLNs. The DHA stability increased with the direct spray-drying approach. Release studies of DHA in the direct sprayed dried samples revealed a lag time for 2 h in acidic media followed by rapid release in phosphate buffer (pH 6.8).

Microencapsulação e liberação controlada por difusão de ingredientes alimentícios produzidos através da secagem por atomização: revisão

Resumo A utilização de ingredientes microencapsulados na indústria alimentícia apresenta crescente expansão. A microencapsulação é utilizada para proteger o material ativo de condições adversas e apresenta ainda mais vantagens quando utilizada juntamente com a liberação controlada. O uso da atomização para microencapsulação é uma das técnicas mais utilizadas devido ao seu baixo custo e facilidade de aplicação. Esta revisão descreve a produção de micropartículas contendo ingredientes alimentícios através da secagem por atomização e discute a liberação controlada do material ativo das micropartículas pelo mecanismo de difusão e modelos cinéticos.

Properties of spray-dried fish oil with different carbohydrates as carriers

This study evaluated the application of cashew gum, Arabic gum and starch on physical and thermal properties, and fatty acid profiles of spray-dried fish oil. A completely randomized design was used to evaluate the influence of the type of material on the properties of the microparticles. Hygroscopicity and solubility was higher for particles produced using cashew gum and reached 15 g/100 g and 85 g/100 g, respectively. Analyzing the thermogravimetric curves, it was found that cashew gum bulk showed two steps of degradation. For the microcapsules containing encapsulated fish oil in cashew gum, an extra degradation step at 471 °C was found. It was possible to verify the occurrence of diffused and wide peaks in the X-ray diffractograms for all three carbohydrate polymers. The particles produced presented spherical shape with cavities. The fatty acid profile for the fish oil changed only when using modified starch as wall material, where a significant loss of omega-3 fatty acids was observed. The particles produced with cashew gum had physical properties similar to those when applying materials commonly used and this biopolymer has the potential for application as a carrier in spray drying processes .

Stability and in vitro release behaviour of encapsulated omega fatty acid-rich oils in lentil protein isolate-based microcapsules

The objective of this study was to investigate the use of a lentil protein isolate-based microcapsule design as a platform for entrapping different types of omega fatty acid-rich oil (e.g. canola, fish and flaxseed oils) and to characterise differences in the physical properties (e.g. moisture content, water activity, colour, wettability, particle size, surface oil and entrapment efficiency), storage stability and in vitro release behaviour of the entrapped oils. All microcapsules displayed similar physical properties regardless of the core material. Free fatty acid content, peroxide value, 2-thiobarbituric acid reactive substances and accelerated oxidation test were investigated between the free and encapsulated oils to determine protective effects from microencapsulation and found the wall material provided the greatest protective effect to the fish oils relative to the others. Based on an in vitro release assay, it was proposed that different intrinsic properties of fatty acids (e.g. polarity, conformation, chain length and number of double bonds) led to different release properties under simulated conditions. For instance, more encapsulated canola oil (∼8.9%) was released within simulated gastric fluid, whereas more encapsulated fish oil (∼73.4%) was released within simulated gastrointestinal fluids. Overall, the capsule design used in this study could be potentially used as a universal platform to deliver more healthy oils.

Comparative Study on Different Drying Methods of Fish Oil Microcapsules

Microencapsulation is widely used to minimize the oxidation of fish oil products. This study compared the effects of different drying methods, for example, spray drying (SD), freeze drying (FD), and spray freeze drying (SFD) on the microencapsulation of fish oil. Spray drying (SD) is the most common method for producing fish oil microcapsules, and it has low operation cost and short processing time, while the product yield and quality are poor. Freeze drying (FD) can be used to produce oil microcapsules with high quality, but it takes long time and high overall cost for drying. Spray freeze drying (SFD) is a new method for the preparation of microcapsules, which combines the SD and FD processes to obtain high quality powder. The yield of powder reached 95.07% along with porous structure by SFD. The stability and slow-release property of SFD products were better than those of SD and FD, which showed that SFD improved product storage stability and potential digestibility.

Fabrication of Concentrated Fish Oil Emulsions Using Dual-Channel Microfluidization: Impact of Droplet Concentration on Physical Properties and Lipid Oxidation

Chemically unstable lipophilic bioactives, such as polyunsaturated lipids, often have to be encapsulated in emulsion-based delivery systems before they can be incorporated into foods, supplements, and pharmaceuticals. The objective of this study was to develop highly concentrated emulsion-based fish oil delivery systems using natural emulsifiers. Fish oil-in-water emulsions were fabricated using a highly efficient dual-channel high-pressure microfluidizer. The impact of oil concentration on the formation, physical properties, and oxidative stability of fish oil emulsions prepared using two natural emulsifiers (quillaja saponins and rhamnolipids) and one synthetic emulsifier (Tween-80) was examined. The mean droplet size, polydispersity, and apparent viscosity of the fish oil emulsions increased with increasing oil content. However, physically stable emulsions with high fish oil levels (30 or 40 wt %) could be produced using all three emulsifiers, with rhamnolipids giving the smallest droplet size (d < 160 nm). The stability of the emulsions to lipid oxidation increased as the oil content increased. The oxidative stability of the emulsions also depended on the nature of the emulsifier coating the lipid droplets, with the oxidative stability decreasing in the following order: rhamnolipids > saponins ≈ Tween-80. These results suggest that rhamnolipids may be particularly effective at producing emulsions containing high concentrations of ω-3 polyunsaturated fatty acids-rich fish oil.