Influence of rice bran stearin on stability, properties and encapsulation efficiency of polyglycerol polyricinoleate (PGPR)-stabilized water-in-rice bran oil emulsions

Effect of lipid type on betulin-stabilized water-in-oil Pickering emulsion: emulsion properties, in vitro digestion, and betulin bioaccessibility

BACKGROUND

The Pickering emulsion delivery technique is widely acknowledged for its efficacy in serving as a carrier that can encapsulate functional components effectively. Previous studies have shown significant differences in the stability of Pickering emulsions composed of different oil phases and in the bioaccessibility of the encapsulated functional ingredients. This study therefore investigated the effects of different carrier oils in the betulin self-stabilized water-in-oil (W/O) Pickering emulsion on the stability of the emulsion and bioaccessibility of betulin.

RESULTS

The results showed that the oil type was one of the main factors affecting the stability of the emulsion. Palm oil and coconut oil provided better storage stability and centrifugal stability due to the high saturated fatty acid content. The bioavailability of betulin correlated significantly with the composition and characteristics of fatty acids in carrier oils. Carrier oils rich in low-saturation long-chain fatty acids tended to release more free fatty acids (FFAs), thus forming larger and more mixed micelles with stronger swelling and dissolution ability, resulting in a relatively high bioaccessibility of betulin. In contrast, the bioaccessibility of betulin in the emulsion prepared by coconut oil (with high saturated fatty acid content) was relatively low (1.17%).

CONCLUSION

The results of this study indicate that selecting an appropriate carrier oil is important for the design of self-stabilized W/O Pickering emulsions to improve the bioaccessibility of betulin and other lipophilic bioactivities effectively. © 2024 Society of Chemical Industry.

Development of xanthan gum intelligent oil-in-water ink and its application in pork freshness preservation

To optimize the stability of oil-based inks and ensure their wide application in freshness indication, new natural indicator inks were prepared using a stable oil-in-water structure. This study selected natural Lycium ruthenicum anthocyanin as the dye and glucose as the pigment carrier. Soybean oil was introduced as a linker and xanthan gum as a thickener, and an oil-in-water ink with the function of freshness indication was successfully developed. In ensuring the safety of ink labels for use on food packaging, particular attention is paid to the origin and properties of the materials used. All ingredients are of food-grade or bio-friendly provenance, thereby ensuring the safety of the product when in direct contact with food. We measured the viscosity, particle size and fineness of the ink for micro characterization and evaluated its macro printing performance by its printing effect on A4 paper. According to the experimental results, when the water-oil ratio of the ink is 10:5, the average particle size of the emulsion system is 822.83 nm, and the fineness reaches 5 μm. These values are relatively low, which indicates that the stability of the ink system is high at this time, and the ink shows excellent rheological and printing characteristics. With this water-to-oil ratio, the ink can show the best results when printed on A4 paper, clearly displaying image details. In addition, in fresh pork applications, inks with a 10: 5 water-to-oil ratio provide an accurate and highly sensitive indication of the freshness of pork. When the freshness of the pork changes, the ink color responds promptly. This high sensitivity makes the ink ideal for use as a food freshness indication tool, providing consumers with an intuitive and reliable reference for pork freshness. As a further innovation, combining this ink-printed label with a WeChat app not only allows consumers to know the freshness of the food in real-time but also tracks the supply chain information of the food, providing a more comprehensive application prospect for freshness-indicating products.

Polyglycerol polyricinoleate and lecithin stabilized water in oil nanoemulsions for sugaring Beijing roast duck: Preparation, stability mechanisms and color improvement

Traditional Beijing roast duck often suffers from uneven color and high sugar content after roasting. Water-in-oil (W/O) nanoemulsion is a promising alternative to replace high concentration of sugar solution used in sugaring process according to similarity-intermiscibility theory. Herein, 3% of xylose was embedded in the aqueous phase of W/O emulsion to replace 15% maltose solution. W/O emulsions with different ratios of lecithin (LEC) and polyglycerol polyricinoleate (PGPR) were constructed by high-speed homogenization and high-pressure homogenization. Distribution and penetration extent of solutions and emulsions through the duck skin, as well as the color uniformity of Beijing roast duck were analyzed. Emulsions with LEC:PGPR ratios of 1:3 and 2:2 had better stability. Stable interfacial film and spatial structure were important factors influencing emulsion stabilization. The stable W/O emulsions could more uniformly distribute onto the surface of duck skin and longitudinally penetrate through the skin than solutions.

Constructing myosin/high-density lipoprotein composite emulsions: Roles of pH on emulsification stability, rheological and structural properties

The emulsification activity of myosin plays a significant role in affecting quality of emulsified meat products. High-density lipoprotein (HDL) possesses strong emulsification activity and stability due to its structural characteristics, suggesting potential for its utilization in developing functional emulsified meat products. In order to explore the effect of HDL addition on emulsification stability, rheological properties and structural features of myosin (MS) emulsions, HDL-MS emulsion was prepared by mixing soybean oil with isolated HDL and MS, with pH adjustments ranging from 3.0 to 11.0. The results found that emulsification activity and stability in two emulsion groups consistently improved as pH increased. Under identical pH, HDL-MS emulsion exhibited superior emulsification behavior as compared to MS emulsion. The HDL-MS emulsion under pH of 7.0-11.0 formed a viscoelastic protein layer at the interface, adsorbing more proteins and retarding oil droplet diffusion, leading to enhanced oxidative stability, compared to the MS emulsion. Raman spectroscopy analysis showed more flexible conformational changes in the HDL-MS emulsion. Microstructural observations corroborated these findings, showing a more uniform distribution of droplet sizes in the HDL-MS emulsion with smaller particle sizes. Overall, these determinations suggested that the addition of HDL enhanced the emulsification behavior of MS emulsions, and the composite emulsions demonstrated heightened responsiveness under alkaline conditions. This establishes a theoretical basis for the practical utilization of HDL in emulsified meat products.

Destabilization of a model O/W/O double emulsion: From bulk to interface

Oil-in-water-in-oil (O/W/O) double emulsions are considered an advanced oil-structuring technology that can accomplish multi-functions to improve food quality and nutrition. However, this special structure is thermodynamically unstable. This study formulated a model O/W/O double emulsion with standard surfactants, Tween 80 (4 %) and polyglycerol polyricinoleate (PGPR, 5 %), using a traditional two-step method with different homogenization parameters. Cryo-SEM and GC-FID results show that O/W/O emulsions were successfully formulated, and the release rate (RR) of medium-chain triglycerides (MCT) oil from the inner oil to the outer oil phase increased significantly with 2nd homogenization speed increasing, respectively. Interestingly, the RR of all samples reached about 75 % after 2 months of storage, suggesting that O/W/O emulsions were highly unstable. To explain the observed instability, dynamic interfacial tension and interfacial rheology were performed using a drop shape tensiometer. Results demonstrated that unadsorbed Tween 80 in the intermediate aqueous phase was a key factor in markedly decreasing the interfacial properties of the outer PGPR-assembled film by affecting the interfacial rearrangement. Additionally, it was found that the MCT release showed a positive correlation with the Tween 80 concentration, demonstrating that the formed Tween 80 micelles could transport oil molecules to strengthen the emulsion instability. Taken together, this study reveals the destabilization mechanism of model O/W/O surfactants-stabilized emulsions from bulk to interface, providing highly relevant insights for the design of stable O/W/O double emulsions.

Analytics and applications of polyglycerol polyricinoleate (PGPR)-Current research progress

Polyglycerol polyricinoleate (PGPR) is a synthetic food additive containing a complex mixture of various esters. In recent years, there has been a growing trend to use PGPR-stabilized water-in-oil (W/O) emulsions to replace fat in order to produce low-calorie food products. In this respect, it is essential to comprehensively characterize the PGPR molecular species composition, which might enable to reduce its required amount in emulsions and foods based on a better understanding of the structure-activity relationship. This review presents the recent research progress on the characterization and quantitative analysis of PGPR. The influencing factors of the emulsifying ability of PGPR in W/O emulsions are further illustrated to provide new insights on the total or partial replacement of PGPR. Moreover, the latest progress on applications of PGPR in food products is described. Current studies have revealed the complex structure of PGPR. Besides, recent research has focused on the quantitative determination of the composition of PGPR and the quantification of the PGPR concentration in foods. However, research on the quantitative determination of the (poly)glycerol composition of PGPR and of the individual molecular species present in PGPR is still limited. Some natural water- or oil-soluble surfactants (e.g., proteins or lecithin) have been proven to enable the partial replacement of PGPR in W/O emulsions. Additionally, water-dispersible phytosterol particles and lecithin have been successfully used as a substitute of PGPR to create stable W/O emulsions.

W/O high internal phase emulsions (HIPEs) stabilized by a piperazinyl based emulsifier

In this study, a piperazinyl-based emulsifier (EA/AMPA) was synthesized to prepare water-in-oil (W/O) high internal phase emulsions (HIPEs). Using kerosene as the oil phase, stable HIPEs with internal phase fractions of up to 98% were prepared. This enabled the EA/AMPA to have a high efficiency, as the HIPEs with a 90% internal phase fraction could be easily prepared with 0.1% of EA/AMPA. In addition, the formation of HIPEs was not affected by the addition of Na⁺. Because of the fact that EA/AMPA has a hydrophilic head with two tertiary amines, EA/AMPA could be easily recovered from the oil phase by adjusting the pH to acidic values. Moreover, the unique structure promoted the formation of stable HIPEs, even with crude oil used as the oil phase. The results indicate that EA/AMPA has the potential to significantly contribute to the preparation of W/O HIPEs and that the design of the hydrophilic head with two tertiary amines can provide a reference for the fabrication of new W/O emulsifiers.

Recent advances on food-grade water-in-oil emulsions: Instability mechanism, fabrication, characterization, application, and research trends

Owing to their promising application prospects, water-in-oil (W/O) emulsions have aroused continuous attention in recent years. However, long-term stability of W/O emulsions remains a particularly challenging problem in colloid science. With the increasing demand of consumers for natural, green, and healthy foods, the heavy reliance on chemically synthesized surfactants to achieve long-term stability has become the key technical defect restricting the application of W/O emulsions in food. To design and manufacture W/O emulsions with long-term stability and clean label, a comprehensive understanding of the fundamentals of the W/O emulsion system is required. This review aims to demystify the field of W/O emulsions and update its current research progress. We first provide a summary on the essential basic knowledge regarding the instability mechanisms, including physical and chemical instability in W/O emulsions. Then, the formulation of the W/O emulsion system is introduced, particularly focusing on the use of natural stabilizers. Besides, the characterization and application of W/O emulsions are also discussed. Finally, we propose promising research trends, including (1) developing W/O high internal phase emulsions (HIPEs) as fat mimetic and substitute, (2) promising formulation routine for long-term stable double emulsions, and (3) searching for novel plant-derived stabilizers of W/O emulsions.

Ultrasonic assisted water-in-oil emulsions encapsulating macro-molecular polysaccharide chitosan: Influence of molecular properties, emulsion viscosity and their stability

An ultrasonic technique was applied to formulation of two-phase water-in-paraffin oil emulsions loading a high-molecular polysaccharide chitosan (CS) and stabilized by an oil-soluble surfactant (Span80) at different operational conditions. The influence of chitosan molecular properties, phase volume ratio (φ_w), Span80 volume fraction (φ_s) and ultrasonic processing parameters were systemically investigated on the basis of mean droplet diameter (MDD) and polydispersity index (PDI) of emulsions. It was observed that the molecular weight (M_w) of CS was an important influential factor to MDD due to the non-Newtonian properties of CS solution varying with M_w. The minimum MDD of 198.5 nm with PDI of 0.326 was obtained with ultrasonic amplitude of 32% for 15 min at an optimum φ_w of 35%, φ_s of 8%, probe position of 2.2 cm to the top of emulsion, while CS with M_w of 400 kDa and deacetylation degree of 84.6% was used. The rise of emulsion viscosity and the reduction of negative zeta potential at φ_w increasing from 5% to 35% were beneficial to obtain finer droplets and more uniform distribution of emulsions, and emulsion viscosity could be represented as a monotonically-decreasing power function of MDD at the same φ_w. FTIR analysis indicated that the molecular structure of paraffin oil was unaffected during ultrasonication. Moreover, the emulsions exhibited a good stability at 4 °C with a slight phase separation at 25 °C after 24 h of storage. By analyzing the evolution of MDD, PDI and sedimentation index (SI) with time, coalescence model showed better fitting results as comparison to Ostwald ripening model, which demonstrated that the coalescence or flocculation was the dominant destabilizing mechanism for such W/O emulsions encapsulating CS. This study may provide a valuable contribution for the application of a non-Newtonian macromolecule solution as dispersed phase to generate nano-size W/O emulsions via ultrasound, and widen knowledge and interest of such emulsions in the functional biomaterial field.

Lipase - catalyzed Modification of Rice Bran Oil Solid Fat Fraction

This study used a rice bran oil solid fat fraction (RBOSF) to produce cocoa butter alternatives via interesterification reaction catalyzed by immobilized lipase (Lipozyme® RM IM) in hexane. Effects of reaction time (6, 12, and 18 h), temperature (55, 60, and 65°C), mole ratios of 3 substrates [RBOSF:palm olein:C18:0 donors (1:1:2, 1:2:3, and 1:2:6)] were determined. The substrate system was dissolved in 3 mL of hexane and 10% of lipase was added. Two sources of C18:0 donors, stearic acid (SAd) and ethyl stearate (ESd) were used. Pancreatic lipase - catalyzed sn-2 positional analysis was also performed on both substrates and structured lipids (interesterification products). Structured lipids (SL) were analyzed by gas - liquid chromatography (G40.35LC) for fatty acid composition. Major fatty acids of RBOSF were C18:1, oleic acid (OA, 41.15±0.01%), C18:2, linoleic acid (LA, 30.05±0.01%) and C16:0, palmitic acid (PA, 22.64±0.01%), respectively. A commercial raw cocoa butter (CB) contained C18:0, stearic acid (SA, 33.13±0.04%), OA (32.52±0.03%), and PA (28.90±0.01%), respectively. Fatty acids at sn-2 position of RBOSF were OA (46.52±0.63%) and LA (42.98±1.1%), while major fatty acid at sn-2 position of CB was OA (85.24±1.22%). The RBOSF had low SA (2.40±0.01%) compared to CB (33.13±0.04%). The content of OA (46.52±0.63%) at sn-2 position in RBOSF was half of that found in CB (85.24±1.22%). Optimal reaction was 1:2:6 mole ratio of the substrate (RBOSF:PO:SAd), at 65°C for 12 h. Fatty acid compositions of the SL were 31.72±0.99% SA, 30.91±0.53% LA, 23.18±0.32% OA, and 13.26±0.34% PA, respectively. Fatty acids at sn-2 position of the SL were 53.72±4.21% OA, 25.11±3.69% LA, 14.18±1.58% PA, and 6.99±0.02% SA, respectively. DSC curves showed the melting point of CB at 20.94°C, while those of the SL were 14.15 and 40.35°C, respectively. The melting completion temperature (T_mc) of CB was 25.5°C while that of SL was 43.9°C, respectively.

Iron Encapsulation in Water-in-Oil Emulsions: Effect of Ferrous Sulfate Concentration and Fat Crystal Formation on Oxidative Stability

Iron deficiency is a major global human health concern. Encapsulation of iron in functional food products may help to solve this problem. However, iron is highly reactive and may promote rapid lipid oxidation in fatty foods. In this study, the effect of ferrous sulfate (0.1 to 0.5 wt%) and rice bran stearin (0 or 30 wt%) on the physical properties, oxidative stability, and encapsulation efficiency of 20 wt% water-in-oil (W/O) emulsions stabilized with polyglycerol polyricinoleate was investigated. In the presence of rice bran stearin crystals in the continuous oil phase, W/O emulsions had smaller mean droplet diameters (d ∼ 250 nm) and better physical stability than its absence (d ∼ 330 nm). An increase in the ferrous sulfate concentration in the water droplets led to a decrease in the oxidative stability of the W/O emulsions. However, the presence of rice bran stearin significantly (P ≤ 0.05) improved their oxidative stability. Moreover, addition of rice bran stearin also significantly (P ≤ 0.05) improved the encapsulation efficiency and delayed ferrous sulfate release from the W/O emulsions. The impact of pH and ionic strength on the encapsulation efficiency of the W/O emulsion was also investigated. Ionic strength affected the encapsulation efficiency much more than pH. The W/O emulsions created in the present study may be useful for the encapsulation and delivery of iron and other water-soluble nutrients into food products.

PRACTICAL APPLICATION

Water-in-oil (W/O) emulsions may be used to encapsulate, protect, and deliver water-soluble bioactive compounds or nutrients into food products. In this study, W/O emulsions stabilized using an oil-soluble surfactant (polyglycerol polyricinoleate, PGPR) and fat crystal network (rice bran stearin) were shown to be useful for encapsulation and delivery of iron into foods. This strategy may be a promising approach to reduce iron deficiency, a major nutritional deficiency for people with inadequate food supplies.