Nano/microencapsulation of anthocyanins; a systematic review and meta-analysis

Formulation and characterization of nanocapsules loaded with roselle anthocyanins extract and enhancement of anthocyanins bioaccessibility

Hibiscus sabdariffa L. (roselle) is a medicinal and edible plant which rich in anthocyanins with potent antioxidant properties. To enhance the stability of roselle anthocyanins, they were encapsulated in nanocapsules composed of carboxymethyl chitosan (CMC), chitosan hydrochloride (CHC), and β-lactoglobulin (β-Lg). In vitro simulated digestion assays evaluated the impact of various core-to-wall ratios and β-Lg concentrations on the bioaccessibility of seven anthocyanins. Nanocapsules with a core-to-wall ratio of 1:2 and β-Lg at 10 mg/mL exhibited the highest encapsulation efficiency (EE). Cyanidin-3-glucoside had the highest EE, while cyanidin-3-sambubioside showed the outstanding retention rate. Furthermore, simulated digestion experiments combined with molecular docking revealed that peonidin-3-glucoside and petunidin-3-glucoside likely interact with and bind to the outer β-Lg layer of the nanocapsules, increasing their release during in vitro digestion. This study demonstrates that encapsulating roselle anthocyanins in CMC, CHC, and β-Lg nanocapsules significantly enhances their bioaccessibility.

Intelligent films based on dual-modified starch and microencapsulated Aronia melanocarpa anthocyanins: Functionality, stability and application

This study aims to enhance the physical properties and color stability of anthocyanin-based intelligent starch films. Three dual-modified starches, namely crosslinked-oxidized starch (COS), acetylated distarch phosphate (ADSP), and hydroxypropyl distarch phosphate (HDSP), were utilized as film matrices. Aronia melanocarpa anthocyanins were incorporated through three different pre-treatments (free, spray-drying microencapsulation, and freeze-drying microencapsulation) to assess the prepared films' functionality, stability, and applicability. The results indicate that the ADSP film exhibited an approximately two-fold increase in elongation at break (EAB) compared to native starch film. Specifically, the ADSP film's water contact angle (WCA) reached 90°, demonstrating excellent flexibility and hydrophobicity. Scanning electron microscopy (SEM) revealed stronger interactions between anthocyanins and the film matrix after microencapsulation. Furthermore, after 30 days of exposure to 37 °C heat and light radiation, the freeze-dried anthocyanin-based intelligent film (FDA film) exhibited minimal fading, displaying the highest stability among the tested films. Notably, during beef freshness monitoring, the intelligent films underwent significant color changes as the beef deteriorated. In conclusion, the developed FDA film, with its outstanding stability and responsive pH characteristics, holds immense potential as a novel packaging material for food applications.

Enhancing anthocyanin extraction efficiency in vegetables and fruits: a high-speed shear homogenization technology

BACKGROUND

To extract anthocyanins with high efficiency, a hypothesis for high-speed shear homogenization extraction (HSHE) method was established through a combination of solvent and ultrasonic-assisted extractions. The efficacy of this hypothesis was demonstrated by performing qualitative and quantitative analyses of 16 anthocyanins extracted from five northern vegetables, and five berry fruits using ultra-high-performance Q-Exactive Orbitrap tandem mass spectrometry. Single-factor experiments were conducted by varying ethanol concentration, temperature, pH and extraction cycles to determine the optimal conditions for this method.

RESULTS

Optimal extraction conditions (ethanol 70-80%, 40-50 °C, pH 3-4, performed twice) were determined using an HSHE (5 min, 10 000 rpm, 25 °C) assisted shaker (60 min) and ultrasonication (40 kHz, 160 W cm-2, 30 min, 25 °C) procedure. Compared to the traditional non-HSHE method, the total anthocyanin content obtained through HSHE extraction showed a significant increase, ranging from 1.0 to 3.9 times higher, with purple cabbage exhibiting the most pronounced enhancement in content. More types of anthocyanins were detected in blueberry (9), black bean (7) and raspberry (5), of which malvidin was the major anthocyanin (0.426 g kg-1) in blueberry, having an amount five times than previously obtained.

CONCLUSION

The established HSHE method has been proven to be a superior technique for anthocyanin extraction, with higher extraction efficiency and concentrations. This technique also provides a new avenue for extracting bioactive compounds from diverse food sources, with potential applications in improving the functional properties of food products. © 2024 Society of Chemical Industry.

Unveiling the multifaceted world of anthocyanins: Biosynthesis pathway, natural sources, extraction methods, copigmentation, encapsulation techniques, and future food applications

Numerous datasets regarding anthocyanins have been noted elsewhere. These previous studies emphasized that all processes must be carried out meticulously from the source used to obtain anthocyanins to their inclusion in relevant applications. However, today, full standardization has not yet been achieved for these processes. For this, presenting the latest developments regarding anthocyanins under one roof would be a useful approach to guide the scientific literature. The current review was designed to serve the stated points. In this context, their biosynthesis pathway was elaborated. Superior potential of fruits and certain by-products in obtaining anthocyanins was revealed compared to their other counterparts. Health-promoting benefits of anthocyanins were detailed. Also, the situation of innovative techniques (ultrasound-assisted extraction, subcritical water extraction, pulse electrical field extraction, and so on) in the anthocyanin extraction was explained. The stability issues, which is one of the most important problems limiting the use of anthocyanins in applications were discussed. The role of copigmentation and various encapsulation techniques in solving these stability problems was summarized. This critical review is a map that provides detailed information about the processes from obtaining anthocyanins, which stand out with their functional properties, to their incorporation into various systems.

Microencapsulation of vitamins: A review and meta-analysis of coating materials, release and food fortification

Vitamins are responsible for providing biological properties to the human body; however, their instability under certain environmental conditions limits their utilization in the food industry. The objective was to conduct a systematic review on the use of biopolymers and lipid bases in microencapsulation processes, assessing their impact on the stability, controlled release, and viability of fortified foods with microencapsulated vitamins. The literature search was conducted between the years 2013-2023, gathering information from databases such as Scopus, PubMed, Web of Science and publishers including Taylor & Francis, Elsevier, Springer and MDPI; a total of 49 articles were compiled The results were classified according to the microencapsulation method, considering the following information: core, coating material, solvent, formulation, process conditions, particle size, efficiency, yield, bioavailability, bioaccessibility, in vitro release, correlation coefficient and references. It has been evidenced that gums are the most frequently employed coatings in the protection of vitamins (14.04%), followed by alginate (10.53%), modified chitosan (9.65%), whey protein (8.77%), lipid bases (8.77%), chitosan (7.89%), modified starch (7.89%), starch (7.02%), gelatin (6.14%), maltodextrin (5.26%), zein (3.51%), pectin (2.63%) and other materials (7.89%). The factors influencing the release of vitamins include pH, modification of the coating material and crosslinking agents; additionally, it was determined that the most fitting mathematical model for release values is Weibull, followed by Zero Order, Higuchi and Korsmeyer-Peppas; finally, foods commonly fortified with microencapsulated vitamins were described, with yogurt, bakery products and gummy candies being notable examples.

A review on improving the sensitivity and color stability of naturally sourced pH-sensitive indicator films

Naturally sourced pH-sensitive indicator films are of interest for real-time monitoring of food freshness through color changes because of their safety. Therefore, natural pigments for indicator films are required. However, pigment stability is affected by environmental factors, which can in turn affect the sensitivity and color stability of the pH-sensitive indicator film. First, natural pigments (anthocyanin, betalain, curcumin, alizarin, and shikonin) commonly used in pH-sensitive indicator films are presented. Subsequently, the mechanisms behind the change in pigment color under different pH environments and their applications in monitoring food freshness are also described. Third, influence factors, such as the sources, types, and pH sensitivity of pigments, as well as environmental parameters (light, temperature, humidity, and oxygen) of sensitivity and color stability, are analyzed. Finally, methods for improving the pH-sensitive indicator film are explored, encapsulation of natural pigments, incorporation of a hydrophobic film-forming matrix or function material, and protective layer have been shown to enhance the color stability of indicator films, the addition of copigments or mental ions, blending of different natural pigments, and the utilization of electrospinning have been proved to increase the color sensitivity of indicator films. This review could provide theoretical support for the development of naturally sourced pH-sensitive indicator films with high stability and sensitivity and facilitate the development in the field of monitoring food freshness.

Dietary Supplementation of Haskap Berry (Lonicera caerulea L.) Anthocyanins and Probiotics Attenuate Dextran Sulfate Sodium-Induced Colitis: Evidence from an Experimental Animal Model

Haskap berry (Lonicera caerulea L.) is a rich dietary source of anthocyanins with potent anti-inflammatory properties. In this study, isolated haskap berry anthocyanins were encapsulated in maltodextrin and inulin (3:1) by freeze-drying to improve stability and bioavailability. The structural properties of microcapsules, encapsulation yield, efficiency, recovery, and powder retention were evaluated. The microcapsules that exhibited the highest encapsulation efficiency (60%) and anthocyanin recovery (89%) were used in the dextran sulfate sodium (DSS)-induced acute colitis in mice. Thirty-five BALB/c male mice of seven weeks old were divided into seven dietary supplementation groups (n = 5) to receive either free anthocyanins, encapsulated anthocyanins (6.2 mg/day), or probiotics (1 × 109 CFU/day) alone or as combinations of anthocyanin and probiotics. As observed by clinical data, free anthocyanin and probiotic supplementation significantly reduced the severity of colitis. The supplementary diets suppressed the DSS-induced elevation of serum inflammatory (interleukin (IL)-6 and tumor necrosis factor) and apoptosis markers (B-cell lymphoma 2 and Bcl-2-associated X protein) in mice colon tissues. The free anthocyanins and probiotics significantly reduced the serum IL-6 levels. In conclusion, the dietary supplementation of haskap berry anthocyanins and probiotics protects against DSS-induced colitis possibly by attenuating mucosal inflammation, and this combination has the potential as a health-promoting dietary supplement and nutraceutical.

Co-encapsulation of Shirazi thyme (Zataria multiflora) essential oil and nisin using caffeic acid grafted chitosan nanogel and the effect of this nanogel as a bio-preservative in Iranian white cheese

The current study aims to co-encapsulate Shirazi thyme (Zataria multiflora) essential oil (ZEO) and nisin into chitosan nanogel as an antimicrobial and antioxidant agent to enhance the shelf-life of cheese. Chitosan-caffeic acid (CS-CA) nanogel was produced to co-encapsulate Zataria multiflora essential oil and nisin. This nanogel was characterized by dynamic light scattering (DLS), Fourier Transform Infrared (FTIR) spectroscopic analysis, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM) images. The effect of free (TFZN) and encapsulated ZEO-nisin in chitosan nanogel (TCZN) on the chemical and microbiological properties of Iranian white cheese was assessed. The particle size, polydispersity index value (PDI), zeta potential, antioxidant activity, and encapsulation efficiency of the optimal chitosan-ZEO-nisin nanogel were 421.6 nm, 0.343, 34.0 mV, 71.06%-82.69%, and 41.3 ± 0.5%, 0.79 ± 0.06 mg/mL. respectively. FTIR and XRD approved ZEO and nisin entrapment within chitosan nanogel. The chitosan nanogel showed a highly porous surface with an irregular shape. The bioactive compounds of ZEO and nisin decreased the pH changes in cheese. On the 60th day of storage, the acidity of treated samples was significantly lower than that of control. Although the lowest anisidine index value was observed in samples treated with sodium nitrate (NaNO3) (TS), there was no significant difference between this sample and TCZN. The lowest microbial population was observed in TCZN and TS. After 60 days of ripening, Coliforms were not detected in the culture medium of TCZN and TS. The results can contribute to the development of a natural preservative with the potential for application in the dairy industry.

Theoretical Study of Cyanidin-Resveratrol Copigmentation by the Functional Density Theory

Anthocyanins are colored water-soluble plant pigments. Upon consumption, anthocyanins are quickly absorbed and can penetrate the blood-brain barrier (BBB). Research based on population studies suggests that including anthocyanin-rich sources in the diet lowers the risk of neurodegenerative diseases. The copigmentation caused by copigments is considered an effective way to stabilize anthocyanins against adverse environmental conditions. This is attributed to the covalent and noncovalent interactions between colored forms of anthocyanins (flavylium ions and quinoidal bases) and colorless or pale-yellow organic molecules (copigments). The present work carried out a theoretical study of the copigmentation process between cyanidin and resveratrol (CINRES). We used three levels of density functional theory: M06-2x/6-31g+(d,p) (d3bj); ωB97X-D/6-31+(d,p); APFD/6-31+(d,p), implemented in the Gaussian16W package. In a vacuum, the CINRES was found at a copigmentation distance of 3.54 Å between cyanidin and resveratrol. In water, a binding free energy ∆G was calculated, rendering -3.31, -1.68, and -6.91 kcal/mol, at M06-2x/6-31g+(d,p) (d3bj), ωB97X-D/6-31+(d,p), and APFD/6-31+(d,p) levels of theory, respectively. A time-dependent density functional theory (TD-DFT) was used to calculate the UV spectra of the complexes and then compared to its parent molecules, resulting in a lower energy gap at forming complexes. Excited states' properties were analyzed with the ωB97X-D functional. Finally, Shannon aromaticity indices were calculated and isosurfaces of non-covalent interactions were evaluated.

Dietary Sources, Stabilization, Health Benefits, and Industrial Application of Anthocyanins-A Review

Natural phytochemicals are well known to protect against numerous metabolic disorders. Anthocyanins are vacuolar pigments belonging to the parent class of flavonoids. They are well known for their potent antioxidant and gut microbiome-modulating properties, primarily responsible for minimizing the risk of cardiovascular diseases, diabetes, obesity, neurodegenerative diseases, cancer, and several other diseases associated with metabolic syndromes. Berries are the primary source of anthocyanin in the diet. The color and stability of anthocyanins are substantially influenced by external environmental conditions, constraining their applications in foods. Furthermore, the significantly low bioavailability of anthocyanins greatly diminishes the extent of the actual health benefits linked to these bioactive compounds. Multiple strategies have been successfully developed and utilized to enhance the stability and bioavailability of anthocyanins. This review provides a comprehensive view of the recent advancements in chemistry, biosynthesis, dietary sources, stabilization, bioavailability, industrial applications, and health benefits of anthocyanins. Finally, we summarize the prospects and challenges of applications of anthocyanin in foods.

Co-encapsulation of curcumin and anthocyanins in bovine serum album-fucoidan nanocomplex with a two-step pH-driven method

BACKGROUND

Curcumin (CUR) and anthocyanins (ACN) are recommended due to their bioactivities. However, their nutritional values and health benefits are limited by their low oral bioavailability. The incorporation of bioactive substances into polysaccharide-protein composite nanoparticles is an effective way to enhance their bioavailability. Accordingly, this study explored the fabrication of bovine serum albumin (BSA)-fucoidan (FUC) hybrid nanoparticles using a two-step pH-driven method for the delivery of CUR and ACN.

RESULTS

Under a 1:1 weight ratio of BSA to FUC, the point of zero charge moved from pH ⁓ 4.7 for BSA to around 2.5 for FUC-coated BSA, and the formation of BSA-FUC nanocomplex was pH-dependent by showing the maximum CUR emission wavelength shifting from 546 nm (CUR-loaded BSA-FUC at pH 4.7) and 544 nm (CUR/ACN-loaded BSA-FUC nanoparticles at pH 4.7) to 540 nm (CUR-loaded BSA-FUC at pH 6.0) and 539 nm (CUR/ACN-loaded BSA-FUC nanoparticles at pH 6.0). Elevated concentrations of NaCl from 0 to 2.5 mol L-1 caused particle size increase from about 250 to about 800 nm, but showing no effect on the encapsulation efficiency of CUR. The CUR and ACN entrapped, respectively, in the inner and outer regions of the BSA-FUC nanocomplex were released at different rates. After incubation for 10 h, more than 80% of ACN was released, while less than 25% of CUR diffused into the receiving medium, which fitted well to Logistic and Weibull models.

CONCLUSION

In summary, the BSA-FUC nanocomposites produced by a two-step pH-driven method could be used for the co-delivery of hydrophilic and hydrophobic nutraceuticals. © 2023 Society of Chemical Industry.

Anthocyanin-Loaded Polymers as Promising Nature-Based, Responsive, and Bioactive Materials

Anthocyanins are a specific group of molecules found in nature that have recently received increasing attention due to their interesting biological and colorimetric properties that have been successfully applied in several fields such as food preservation and biomedicine. Consequently, reviews devoted to a general overview of these flavonoids have proliferated in recent years. Meanwhile, the incorporation of anthocyanins into polymeric systems has become an interesting strategy to widen the applicability of these molecules and develop new smart and functional polymers in the above cited areas. However, anthocyanin-based polymers have been scarcely reviewed in the literature. Accordingly, this review aims to be a systematic summary of the most recent approaches for the incorporation of anthocyanins into macro-, micro-, or nanostructured polymers. Moreover, this work describes the fundamentals of the applicability of smart anthocyanin-based polymers and offers an updated review of their most interesting applications as sensors, biological regulators, and active materials.

Metal nanoparticles and carbohydrate polymers team up to improve biomedical outcomes

The convergence of carbohydrate polymers and metal nanoparticles (MNPs) holds great promise for biomedical applications. Researchers aim to exploit the capability of carbohydrate matrices to modulate the physicochemical properties of MNPs, promote their therapeutic efficiency, improve targeted drug delivery, and enhance their biocompatibility. Therefore, understanding various attributes of both carbohydrates and MNPs is the key to harnessing them for biomedical applications. The many distinct types of carbohydrate-MNP systems confer unique capabilities for drug delivery, wound healing, tissue engineering, cancer treatment, and even food packaging. Here, we introduce distinct physicochemical/biological properties of carbohydrates and MNPs, and discuss their potentials and shortcomings (alone and in combination) for biomedical applications. We then offer an overview on carbohydrate-MNP systems and how they can be utilized to improve biomedical outcomes. Last but not least, future perspectives toward the application of such systems are highlighted.

Electrospun zein nanofibers containing anthocyanins extracted from red cabbage (Brassica oleracea L.)

This study aims to fabricate and characterize the zein nanoribbons loaded with different concentrations (2.5, 3, 3.5, 4, and 4.5°wt%) of the anthocyanins extracted from red cabbage through the electrospinning technique. It was demonstrated that an increase in anthocyanin concentration caused an increase in viscosity and electrical conductivity without any significant change in the surface tension of the electrospinning solution. It was shown by scanning electron microscopy that an increase in anthocyanins concentration reduced the porosity of the bead-free ribbons compared with blank zein. The Fourier transform infrared spectroscopy analysis, X-ray diffraction patterns, and differential scanning calorimetry results reflected the presence of significant molecular interactions between zein and anthocyanins. Zein-anthocyanins showed high encapsulation efficiency of close to 100%. As a result, it can conclude that electrospinning is a promising method to encapsulate functional ingredients like anthocyanins.

Protein and Peptide-Based Nanotechnology for Enhancing Stability, Bioactivity, and Delivery of Anthocyanins

Anthocyanin, a unique natural polyphenol, is abundant in plants and widely utilized in biomedicine, cosmetics, and the food industry due to its excellent antioxidant, anticancer, antiaging, antimicrobial, and anti-inflammatory properties. However, the degradation of anthocyanin in an extreme environment, such as alkali pH, high temperatures, and metal ions, limits its physiochemical stabilities and bioavailabilities. Encapsulation and combining anthocyanin with biomaterials could efficiently stabilize anthocyanin for protection. Promisingly, natural or artificially designed proteins and peptides with favorable stabilities, excellent biocapacity, and wide sources are potential candidates to stabilize anthocyanin. This review focuses on recent progress, strategies, and perspectives on protein and peptide for anthocyanin functionalization and delivery, i.e., formulation technologies, physicochemical stability enhancement, cellular uptake, bioavailabilities, and biological activities development. Interestingly, due to the simplicity and diversity of peptide structure, the interaction mechanisms between peptide and anthocyanin could be illustrated. This work sheds light on the mechanism of protein/peptide-anthocyanin nanoparticle construction and expands on potential applications of anthocyanin in nutrition and biomedicine.

Alginate microbeads incorporated with anthocyanins from purple corn (Zea mays L.) using electrostatic extrusion: Microencapsulation optimization, characterization, and stability studies

Microencapsulation of purple corn anthocyanins was carried out via an electrostatic extruder using alginate as a wall material. The influence of alginate concentration (1-2 %), extract concentration (20-30 %), and extrusion voltage (3-5 kV) on encapsulation efficiency and mean particle size was evaluated using response surface methodology. Optimal conditions were obtained to produce two different extract-loaded microbeads. Microbeads with the highest encapsulation efficiency (EE) and minimum particle size were achieved at 1 % alginate, 20 % extract, and 5 kV extrusion voltage (EEC3G = 70.26 %, EETPC = 91.59 %, particle size = 1.29 mm). In comparison, the microbeads with the efficient entrapment and maximum particle size were obtained at 1 % alginate, 26 % extract, and 3 kV (EEC3G = 81.15 %, EETPC = 91.01 %, particle size = 1.87 mm). Brunauer-Emmett-Teller (BET) surface area, pore size, and pore volume decreased after the inclusion of extract, with the lowest values reported for the smallest microbeads containing the extract. Scanning electron microscopy confirmed the results obtained by BET method and demonstrated fewer cracks and lower shrinkage of encapsulated samples. Fourier-transform infrared results proved the presence of anthocyanins and further possible interactions between phenolics and alginate. Stability studies revealed the color maintenance of anthocyanins-loaded microbeads during 4 weeks of storage at 4 °C and 8 °C. Moreover, the small and large particles showed a 7.6 and 3.4-fold reduction in degradation rate at 4 °C compared to their unencapsulated counterparts. Anthocyanins-loaded alginate microbeads retained over 80 % of cyanidin-3-glucoside at 4 °C and 8 °C, suggesting a promising potential of optimized microbeads for intelligent packaging applications.

Coordinated encapsulation by β-cyclodextrin and chitosan derivatives improves the stability of anthocyanins

To improve the stability of anthocyanins (ACNs), ACNs were loaded into dual-encapsulated nanocomposite particles by self-assembly using β-cyclodextrin (β-CD) and two different water-soluble chitosan derivatives, namely, chitosan hydrochloride (CHC) and carboxymethyl chitosan (CMC). The ACN-loaded β-CD-CHC/CMC nanocomplexes with small diameters (333.86 nm) and had a desirable zeta potential (+45.97 mV). Transmission electron microscopy (TEM) showed that the ACN-loaded β-CD-CHC/CMC nanocomplexes had a spherical structure. Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (¹H NMR) and X-ray diffraction (XRD) confirmed that the ACNs in the dual nanocomplexes were encapsulated in the cavity of the β-CD and that the CHC/CMC covered the outer layer of β-CD through noncovalent hydrogen bonding. The ACNs from the dual-encapsulated nanocomplexes improved stability of ACNs under adverse environmental conditions or in a simulated gastrointestinal environment. Further, the nanocomplexes exhibited good storage stability and thermal stability over a wide pH range when added into simulated electrolyte drinks (pH = 3.5) and milk tea (pH = 6.8). This study provides a new option for the preparation of stable ACNs nanocomplexes and expands the applications for ACNs in functional foods.

Valorization of polyphenolic compounds from food industry by-products for application in polysaccharide-based nanoparticles

In the last decades, evidence has indicated the beneficial properties of dietary polyphenols. In vitro and in vivo studies support that the regular intake of these compounds may be a strategy to reduce the risks of some chronic non-communicable diseases. Despite their beneficial properties, they are poorly bioavailable compounds. Thus, the main objective of this review is to explore how nanotechnology improves human health while reducing environmental impacts with the sustainable use of vegetable residues, from extraction to the development of functional foods and supplements. This extensive literature review discusses different studies based on the application of nanotechnology to stabilize polyphenolic compounds and maintain their physical-chemical stability. Food industries commonly generate a significant amount of solid waste. Exploring the bioactive compounds of solid waste has been considered a sustainable strategy in line with emerging global sustainability needs. Nanotechnology can be an efficient tool to overcome the challenge of molecular instability, especially using polysaccharides such as pectin as assembling material. Complex polysaccharides are biomaterials that can be extracted from citrus and apple peels (from the juice industries) and constitute promising wall material stabilizing chemically sensitive compounds. Pectin is an excellent biomaterial to form nanostructures, as it has low toxicity, is biocompatible, and is resistant to human enzymes. The potential extraction of polyphenols and polysaccharides from residues and their inclusion in food supplements may be a possible application to reduce environmental impacts and constitutes an approach for effectively including bioactive compounds in the human diet. Extracting polyphenolics from industrial waste and using nanotechnology may be feasible to add value to food by-products, reduce impacts on nature and preserve the properties of these compounds.

Microencapsulation of anthocyanins as natural dye extracted from fruits - A systematic review

Anthocyanins are naturally colored compounds that can be extracted from plants, especially fruits. Their molecules are unstable under normal processing conditions; thus, they must be protected using modern technologies, such as microencapsulation. For this reason, many industries are searching for information from review studies to find the conditions that improve these natural pigments' stability. This systematic review aimed to elucidate different aspects of anthocyanins, such as main extraction and microencapsulation methods, gaps in analytical techniques, and industrial optimization measurements. Initially, 179 scientific articles were retrieved, of which seven clusters were found with 10-36 cross-linked references. Sixteen articles containing 15 different botanical specimens were included in the review, most focusing on the whole fruit, pulp, or subproducts. The extraction and microencapsulation technique resulting in the highest anthocyanin content was sonication with ethanol, temperature below 40 °C, and maximum time of 30 min, followed by microencapsulation by spray drying with maltodextrin or gum Arabic. Color apps and simulation programs may help verify natural dyes' composition, characteristics, and behavior.

Nanoformulations for the Delivery of Dietary Anthocyanins for the Prevention and Treatment of Diabetes Mellitus and Its Complications

Diabetes mellitus (DM) is a metabolic disease characterized by abnormal blood glucose levels-hyperglycemia, caused by a lack of insulin secretion, impaired insulin action, or a combination of both. The incidence of DM is increasing, resulting in billions of dollars in annual healthcare costs worldwide. Current therapeutics aim to control hyperglycemia and reduce blood glucose levels to normal. However, most modern drugs have numerous side effects, some of which cause severe kidney and liver problems. On the other hand, natural compounds rich in anthocyanidins (cyanidin, delphinidin, malvidin, pelargonidin, peonidin, and petunidin) have also been used for the prevention and treatment of DM. However, lack of standardization, poor stability, unpleasant taste, and decreased absorption leading to low bioavailability have hindered the application of anthocyanins as therapeutics. Therefore, nanotechnology has been used for more successful delivery of these bioactive compounds. This review summarizes the potential of anthocyanins for the prevention and treatment of DM and its complications, as well as the strategies and advances in the delivery of anthocyanins using nanoformulations.

Fabrication of anthocyanin–rich W1/O/W2 emulsion gels based on pectin–GDL complexes: 3D printing performance

The stability of anthocyanin-rich W₁/O/W₂ double emulsions prepared with Nicandra physalodes (Linn.) Gaertn. Seeds pectin was investigated, including droplet sizes, ζ-potential, viscosity, color, microstructures and encapsulation efficiency. Furthermore, the gelation behavior, rheological behavior, texture behavior and three-dimensional (3D) printing effects of the W₁/O/W₂ emulsion gels induced with Glucono-delta-lactone (GDL) were studied. The L*, b*, ΔE, droplet sizes and ζ-potential of the emulsions were gradually increased, while other indicators were gradually decreased during 28 days of storage under 4 ℃. The storage stability of sample under storage at 4 ℃ was higher than 25 ℃. The G' of W₁/O/W₂ emulsion gels gradually boosted with increased GDL addition, and reached the highest after the addition of 1.6 % GDL. In creep-recovery sweep, the minimum strain of 1.68 % and the highest recovery rate of 86 % were also found for the emulsion gels with 1.6 % GDL. Accordingly, the models "KUST", hearts, flowers printed by emulsion gels after 60 min addition of 1.6 % GDL had the best printing effects. The W₁/O/W₂ emulsion gels based on pectin-GDL complexes exhibited good performance in protecting anthocyanins and suggested as a potential ink for food 3D printing.

Pectin-based nanoencapsulation strategy to improve the bioavailability of bioactive compounds

Pectin is one of the polysaccharides to be used as a coating nanomaterial. The characteristics of pectin are suitable to form nanostructures for protection, increased absorption, and bioavailability of different active compounds. This review aims to point out the structural features of pectins and their use as nanocarriers. It also indicates the principal methodologies for the elaboration and application of foods. The research carried out shows that pectin is easily extracted from natural sources, biodegradable, biocompatible, and non-toxic. The mechanical resistance and stability in different pH ranges and the action of digestive enzymes allow the nanostructures to pass intact through the gastrointestinal system and be effectively absorbed. Pectin can bind to macromolecules, especially proteins, to form stable nanostructures, which can be formed by different methods; polyelectrolyte complexes are the most frequent ones. The pectin-derived nanoparticles could be added to foods and dietary supplements, demonstrating a promising nanocarrier with a broad technological application.

Nanoencapsulation of Cyanidin 3-O-Glucoside: Purpose, Technique, Bioavailability, and Stability

The current growing attractiveness of natural dyes around the world is a consequence of the increasing rejection of synthetic dyes whose use is increasingly criticized. The great interest in natural pigments from herbal origin such as cyanidin 3-O-glucoside (C3G) is due to their biological properties and their health benefits. However, the chemical instability of C3G during processing and storage and its low bioavailability limits its food application. Nanoencapsulation technology using appropriate nanocarriers is revolutionizing the use of anthocyanin, including C3G. Owing to the chemical stability and functional benefits that this new nanotechnology provides to the latter, its industrial application is now extending to the pharmaceutical and cosmetic fields. This review focuses on the various nanoencapsulation techniques used and the chemical and biological benefits induced to C3G.

Does anthocyanins consumption affect weight and body composition? A systematic review and meta-analysis of randomized controlled trials

Background and Aims

Anthocyanins (ACNs) are water-soluble plant pigments belong to flavonoids with beneficial effects on health and disease prevention. Some studies have examined the effect of ACNs on anthropometric and body composition indices, but the findings were inconsistent. This systematic review and meta-analysis aimed to investigate the effect of ACNs and sources rich in anthocyanins on body mass index (BMI), body weight (BW), waist circumference (WC), hip circumference (HC), waist-hip ratio (WHR), percentage of fat mass (PFM) and fat free mass (FFM).

Methods

PubMed, Web of Science, Scopus, and Google Scholar were searched with no limitation until May 2021 to find relevant randomized controlled clinical trials (RCT). The risk of bias was assessed utilizing Cochrane collaboration's tool. Weighted mean differences (WMD) and 95% confidence intervals (CIs) were obtained using a random effects model.

Results

A total of 31 RCTs (with 0.77-640 mg/day of ACNs supplementation for 28-90 days) with 1438 participants were included. No significant effect was found in BMI, WC, HC, WHR, PFM and FFM after ACNs consumption.

Conclusions

The results showed that ACNs did not significantly affect anthropometric and body composition parameters. Further high-quality RCTs are required to validate these findings.

Effects of encapsulation methods on bioaccessibility of anthocyanins: a systematic review and meta-analysis

Anthocyanins have multiple health benefits. However, they are prone to degradation during gastrointestinal digestion, impeding their utilization. Various encapsulation systems have been proposed to improve their bioaccessibility and bioavailability. This review aims to provide a systematic evaluation and meta-analysis of published studies examining the effect of microencapsulation on the bioaccessibility of anthocyanins. A comprehensive and systematic literature search of three databases (Scopus, PubMed, and Web of Science) was conducted. Studies were selected according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria and were reviewed independently by two investigators. Overall, 34 articles were included in the systematic review and 24 were included in the meta-analysis. The fold changes in bioaccessibility between encapsulated and non-encapsulated anthocyanins from eligible studies were calculated. The median and 95% confidence intervals (CI) of the fold changes for spray-drying (median 1.23, 95% CI 0.91-1.92), freeze-drying (median 1.19, 95% CI 0.61-1.28), simple coacervation (median 1.80, 95% CI 1.41-3.20), and complex coacervation (median 1.61, 95% CI 0.21-25.00) were calculated. Simple coacervation showed a promising protection against degradation during in vitro digestion. However, when a large number of anthocyanins cannot be released from the microparticles during digestion, encapsulation impedes the bioaccessibility of anthocyanins.

Anthocyanins from Aronia melanocarpa Bound to Amylopectin Nanoparticles: Tissue Distribution and In Vivo Oxidative Damage Protection

The in vivo applications of anthocyanins are limited by their instability. Nano-encapsulation using amylopectin nanoparticles (APNPs) stabilizes anthocyanins to deliver them to tissues to ameliorate their physiological functions. Herein, rats are fed four Aronia melanocarpa anthocyanins encapsulated with APNPs, and their subsequent distributions and bioactivity in nine tissues are revealed using UHPLC-MS. Among digestive tissues, the concentration of the APNP-protected cyanidin 3-O-arabinoside in the stomach is 134.54% of that of the free anthocyanin, while among non-digestive tissues, the APNP-protected cyanidin 3-O-glucoside concentration in the lungs improved by 125.49%. Concentration maxima "double peaks" in the liver and kidney arise from different modes of transport. Sustained release of anthocyanins from anthocyanin-APNPs and stable concentration curves suggest controlled delivery, with most APNPs consumed in the digestive system. APNPs did not affect the overall anthocyanin absorption time or tissues. The superoxide dismutase and malondialdehyde concentrations indicate that APNPs enhance the oxidative damage protection in vivo.

Nano Functional Food: Opportunities, Development, and Future Perspectives

A functional food is a kind of food with special physiological effects that can improve health status or reduce illness. However, the active ingredients in functional foods are usually very low due to the instability and easy degradation of some nutrients. Therefore, improving the utilization rate of the effective ingredients in functional food has become the key problem. Nanomaterials have been widely used and studied in many fields due to their small size effect, high specific surface area, high target activity, and other characteristics. Therefore, it is a feasible method to process and modify functional food using nanotechnology. In this review, we summarize the nanoparticle delivery system and the food nanotechnology in the field of functional food. We also summarize and prospect the application, basic principle, and latest development of nano-functional food and put forward corresponding views.

Microencapsulation for Food Applications: A Review

Food products contain various active ingredients, such as flavors, nutrients, unsaturated fatty acids, color, probiotics, etc., that require protection during food processing and storage to preserve their quality and shelf life. This review provides an overview of standard microencapsulation technologies, processes, materials, industrial examples, reasons for market success, a summary of recent applications, and the challenges in the food industry, categorized by active food ingredients: flavors, polyunsaturated fatty acids, probiotics, antioxidants, colors, vitamins, and others. We also provide a comprehensive analysis of the advantages and disadvantages of the most common microencapsulation technologies in the food industry such as spray drying, coacervation, extrusion, and spray cooling. This review ends with future perspectives on microencapsulation for food applications.

Pectin-based color indicator films incorporated with spray-dried Hibiscus extract microparticles

Colorimetric films incorporated with anthocyanins as an indicator for freshness monitoring have aroused growing interest recently. The pH-sensing colorimetric film were developed based on pectin (HM), containing aqueous hibiscus extract microparticles (HAE). HAE microparticles were obtained by spray drying with different wall materials (Inulin -IN, maltodextrin- MD and their combination). The films were obtained on large scale by continuous casting. These films were characterized for physicochemical analysis, morphological structure, thermal and barrier properties, antioxidant activity, and color change at different pH. The addition of HAE microparticles caused relevant changes to HM-based films, such as in mechanical behavior and improved barrier property (11-22% WVTR reduction) depending on the type of wall material used and the concentration added. It was verified with the thermal stability of films, with a slight increase being observed. The color variation of smart films was entirely pH-dependent. Overall, the proposed color indicator films showed unique features and functionalities and could be used as an alternative natural pH indicator in smart packaging systems.

The Role of Anthocyanin in Modulating Diabetic Cardiovascular Disease and Its Potential to Be Developed as a Nutraceutical

Cardiovascular disease (CVD) is directly linked to diabetes mellitus (DM), and its morbidity and mortality are rising at an alarming rate. Individuals with DM experience significantly worse clinical outcomes due to heart failure as a CVD consequence than non-diabetic patients. Hyperglycemia is the main culprit that triggers the activation of oxidative damage, inflammation, fibrosis, and apoptosis pathways that aggravate diabetic CVD progression. In recent years, the development of phytochemical-based nutraceutical products for diabetic treatment has risen due to their therapeutic properties. Anthocyanin, which can be found in various types of plants, has been proposed for preventing and treating various diseases, and has elicited excellent antioxidative, anti-inflammation, anti-fibrosis, and anti-apoptosis effects. In preclinical and clinical studies, plants rich in anthocyanin have been reported to attenuate diabetic CVD. Therefore, the development of anthocyanin as a nutraceutical in managing diabetic CVD is in demand. In this review, we unveil the role of anthocyanin in modulating diabetic CVD, and its potential to be developed as a nutraceutical for a therapeutic strategy in managing CVD associated with DM.

Colorimetric Indicators Based on Anthocyanin Polymer Composites: A Review

This review explores the colorimetric indicators based on anthocyanin polymer composites fabricated in the last decade, in order to provide a comprehensive overview of their morphological and compositional characteristics and their efficacy in their various application fields. Notably, the structural properties of the developed materials and the effect on their performance will be thoroughly and critically discussed in order to highlight their important role. Finally, yet importantly, the current challenges and the future perspectives of the use of anthocyanins as components of colorimetric indicator platforms will be highlighted, in order to stimulate the exploration of new anthocyanin sources and the in-depth investigation of all the possibilities that they can offer. This can pave the way for the development of high-end materials and the expansion of their use to new application fields.

Onion anthocyanins: Extraction, stability, bioavailability, dietary effect, and health implications

Anthocyanins are high-value compounds, and their use as functional foods and their natural colorant have potential health benefits. Anthocyanins seem to possess antioxidant properties, which help prevent neuronal diseases and thereby exhibit anti-inflammatory, chemotherapeutic, cardioprotective, hepatoprotective, and neuroprotective activities. They also show different therapeutic effects against various chronic diseases. Anthocyanins are present in high concentrations in onion. In recent years, although both conventional and improved methods have been used for extraction of anthocyanins, nowadays, improved methods are of great importance because of their higher yield and stability of anthocyanins. In this review, we compile anthocyanins and their derivatives found in onion and the factors affecting their stability. We also analyze different extraction techniques of anthocyanins. From this point of view, it is very important to be precisely aware of the impact that each parameter has on the stability and subsequently potentiate its bioavailability or beneficial health effects. We present up-to-date information on bioavailability, dietary effects, and health implications of anthocyanins such as antioxidant, antidiabetic, anticancerous, antiobesity, cardioprotective, and hepatoprotective activities.

Research progress of anthocyanin prebiotic activity: A review

BACKGROUND

Anthocyanins are a kind of flavonoids and natural water-soluble pigments, which endow fruits, vegetables, and plants with multiple colors. They are important source of new products with prebiotic activity. However, there is no systematic review documenting prebiotic activity of anthocyanins and their structural analogues. This study aims to fill this gap in literature.

PURPOSE

The objective of this review is to summarize and evaluate the prebiotic activity of anthocyanin's, and discuss the physical and molecular modification methods to improve their biological activities.

STUDY DESIGN AND METHODS

In this review, the databases (PubMed, Google Scholar, Web of Science, Researchgate and Elsevier) were searched profoundly with keywords (anthocyanin's, prebiotics, probiotics, physical embedding and molecular modification).

RESULTS

A total of 34 articles were considered for reviewing. These studies approved that anthocyanins play an important role in promoting the proliferation of probiotics, inhibiting the growth of harmful bacteria and improving the intestinal environment. In addition, physical embedding and molecular modification have also been proved to be effective methods to improve the prebiotic activity of anthocyanins. Anthocyanins could promote the production of short chain fatty acids, accelerate self degradation and improve microbial related enzyme activities to promote the proliferation of probiotics. They inhibited the growth of harmful bacteria by inhibiting the expression of harmful bacteria genes, interfering with the role of metabolism related enzymes and affecting respiratory metabolism. They promoted the formation of a complete intestinal barrier and regulated the intestinal environment to keep the body healthy. Physical embedding, including microencapsulation and colloidal embedding, greatly improved the stability of anthocyanins. On the other hand, molecular modification, especially enzymatic modification, significantly improved the biological activities (antioxidant, prebiotic activity and so on) of anthocyanins.

CONCLUSION

All these research results displayed by this review indicate that anthocyanins are a useful tool for developing prebiotic products. The better activities of the new anthocyanins formed by embedding and modification may make them become more effective raw materials. Our review provides a scientific basis for the future research and application of anthocyanins.

Nanoencapsulated anthocyanin as a functional ingredient: Technological application and future perspectives

Anthocyanins are an important group of phenolic compounds responsible for pigmentation in several plants, and regular consumption is associated with a reduced risk of several diseases. However, the application of anthocyanins in foods represents a challenge due to molecular instability. The encapsulation of anthocyanins in nanostructures is a viable way to protect from the factors responsible for degradation and enable the industrial application of these compounds. Nanoencapsulation is a set of techniques in which the bioactive molecules are covered by resistant biomaterials that protect them from chemical and biological factors during processing and storage. This review comprehensively summarizes the existing knowledge about the structure of anthocyanins and molecular stability, with a critical analysis of anthocyanins' nanoencapsulation, the main encapsulating materials (polysaccharides, proteins, and lipids), and techniques used in the formation of nanocarriers to protect anthocyanins. Some studies point to the effectiveness of nanostructures in maintaining anthocyanin stability and antioxidant activity. The main advantages of the application of nanoencapsulated anthocyanins in foods are the increase in the nutritional value of the food, the addition of color, the increase in food storage, and the possible increase in bioavailability after oral ingestion. Nanoencapsulation improves stability for anthocyanin, thus demonstrating the potential to be included in foods or used as dietary supplements, and current limitations, challenges, and future directions of anthocyanins' have also been discussed.

Advances in dietary proteins binding with co-existed anthocyanins in foods: Driving forces, structure-affinity relationship, and functional and nutritional properties

Anthocyanins, which are the labile flavonoid pigments widely distributed in many fruits, vegetables, cereal grains, and flowers, are receiving intensive interest for their potential health benefits. Proteins are important food components from abundant sources and present high binding affinity for small dietary compounds, e.g., anthocyanins. Protein-anthocyanin interactions might occur during food processing, ingestion, digestion, and bioutilization, leading to significant changes in the structure and properties of proteins and anthocyanins. Current knowledge of protein-anthocyanin interactions and their contributions to functions and bioactivities of anthocyanin-containing foods were reviewed. Binding characterization of dietary protein-anthocyanins complexes is outlined. Advances in understanding the structure-affinity relationship of dietary protein-anthocyanin interaction are critically discussed. The associated properties of protein-anthocyanin complexes are considered in an evaluation of functional and nutritional values.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.

Preparation, characterization and antioxidant activity of sinapic acid grafted chitosan and its application with casein as a nanoscale delivery system for black rice anthocyanins

Anthocyanins (ACNs) have attracted considerable research attention because of their excellent health benefits, but their low stability and bioavailability limit their applications. In this study, sinapic acid-grafted-chitosan (SA-g-CS) conjugate was synthesized by grafting SA onto CS via a free radical mediated method. Nanoparticles were prepared using casein (CA) together with SA-g-CS to improve the performance and sustained release of black rice anthocyanins (BRA). The results of UV-Vis, FTIR and ¹H NMR spectra for SA-g-CS conjugates demonstrated the successful grafting of SA onto CS. The results of DPPH, ABTS and ferric ion reducing antioxidant power assays showed that the SA-g-CS conjugates had strong antioxidant capacities, and the higher the pH of the grafting reaction system, the stronger the antioxidant capacity of the conjugates. X-ray diffraction and scanning electron microscopy analyses showed that the crystallographic property and microstructure of CS were improved by the grafting of SA. Compared with BRA loaded nanoparticles prepared with CA alone or the combination of CS and CA, the BRA loaded nanoparticles constructed by SA-g-CS and CA have smaller particle size, better dispersion, encapsulation efficiency and sustained-release property. These results provided great potential for the application of phenolic acid grafted CS in stabilizing ACNs.

Nanotechnology as a Tool to Mitigate the Effects of Intestinal Microbiota on Metabolization of Anthocyanins

Anthocyanins are an important group of phenolic compounds responsible for pigmentation in several plants. For humans, a regular intake is associated with a reduced risk of several diseases. However, molecular instability reduces the absorption and bioavailability of these compounds. Anthocyanins are degraded by external factors such as the presence of light, oxygen, temperature, and changes in pH ranges. In addition, the digestion process contributes to chemical degradation, mainly through the action of intestinal microbiota. The intestinal microbiota has a fundamental role in the biotransformation and metabolization of several dietary compounds, thus modifying the chemical structure, including anthocyanins. This biotransformation leads to low absorption of intact anthocyanins, and consequently, low bioavailability of these antioxidant compounds. Several studies have been conducted to seek alternatives to improve stability and protect against intestinal microbiota degradation. This comprehensive review aims to discuss the existing knowledge about the structure of anthocyanins while discussing human absorption, distribution, metabolism, and bioavailability after the oral consumption of anthocyanins. This review will highlight the use of nanotechnology systems to overcome anthocyanin biotransformation by the intestinal microbiota, pointing out the safety and effectiveness of nanostructures to maintain molecular stability.

Fabrication and characterization of β-cyclodextrin-epichlorohydrin grafted carboxymethyl chitosan for improving the stability of Cyanidin-3-glucoside

Cyanidin-3-glucoside (C3G), an anthocyanin constituent of fruits and vegetables. It has been proven to possess numerous health benefits with no side effects. However, the poor stability of C3G is an intractable property that limits its application. Hence, the aim of this study is to improve the stability of C3G through the formation of well dispersed nanoparticles. In this study, C3G loaded β-CD-EP-CMC nanoparticles exhibited nearly spherical with good disperse and homogeneous morphology. Results also indicated that the nanoparticles formation of grafting of C3G to β-CD-EP-CMC could significantly improve the stability of C3G to against thermal or light degradation. Collectively, current results strongly aligned with the prospective purpose that the grafting of C3G to β-CD-EP-CMC nanoparticles could be treated as an effective approach for improving the stability. This study opens a new avenue for the utilization and development of novel wall materials β-CD-EP-CMC in C3G associated nutraceutical.