Inactivation of Salmonella and Shiga toxin-producing Escherichia coli (STEC) from the surface of alfalfa seeds and sprouts by combined antimicrobial treatments using ozone and electrolyzed water

Efficacy of an experimental gaseous ozone-based sterilization method for clear aligners

OBJECTIVES

To assess effectiveness of an experimental sterilization method based on the exposure of an O3/O2 gas mixture directly inside the packaging for clear aligners.

MATERIALS AND METHODS

Fifty samples consisting of pieces of polyethylene terephthalate glycol (PET-G) aligners were contaminated by manual handling and subsequently divided into different groups (n = 30 for exposure to O3/O2 gas at different times, n = 10 for positive control with 2% chlorhexidine digluconate, n = 10 for negative control). The measurement of optical densities (OD) of the initial and final microbial cultures was recorded for all groups. Kruskal-Wallis test was used for differences between groups while Wilcoxon test was used to compare initial and final OD values within groups. Statistical significance was set at P < .05.

RESULTS

Comparison within the groups showed statistically significant differences for exposure to the gaseous mixture (72 hours), for positive and negative controls. Other significant differences were found in the multiple comparisons between the application of gaseous ozone (48 hours and 72 hours) and the negative control.

CONCLUSIONS

The direct exposure of gaseous ozone on the aligners inside their packaging showed microbicidal capacity at 72 hours, which was equivalent to the positive control with immersion in chlorhexidine digluconate. This innovative sterilization procedure could be considered in the final manufacturing processes of clear aligners to eliminate the potentially pathogenic microorganisms that are deposited on surfaces of these orthodontic devices.

Inactivation of Salmonella Typhimurium and Listeria monocytogenes on buckwheat seeds through combination treatment with plasma, vacuum packaging, and hot water

AIMS

The objectives of this study were to evaluate the effect of combination treatment with cold plasma (CP), vacuum packaging (VP), and hot water (HW) on the inactivation of foodborne pathogens on buckwheat seeds, and determined the germination rates of seeds and the quality of sprouts following combination treatment.

METHODS AND RESULTS

Buckwheat seeds inoculated with Salmonella Typhimurium and Listeria monocytogenes were treated with CP, HW, CP + HW, VP + HW, or CP + VP + HW. The germination rates of the HW-, CP + HW-, VP + HW-, and CP + VP + HW-treated seeds and the antioxidant activities and rutin contents of the CP + HW- and CP + VP + HW-treated sprouts were determined. HW, CP + HW, and CP + VP + HW were found to reduce the levels of the two pathogens to below the detection limit (1.0 log CFU g-1) at 70°C. However, HW and CP + HW significantly reduced the germination rate of buckwheat seeds. CP + VP + HW did not affect the germination rate of seeds nor the antioxidant activities and rutin content of buckwheat sprouts.

CONCLUSIONS

These results indicate that CP + VP + HW can be used as a novel control method to reduce foodborne pathogens in seeds without causing quality deterioration.

Inactivating Salmonella Enteritidis on shell eggs by using ozone microbubble water

The major pathogen associated with eggs is Salmonella enterica subsp. enterica serovar Enteritidis (S. Enteritidis) and chlorine washing is the most widely used for sanitization. Microbubble, a novel technique and able to operate in large quantity, has been presented to be an alternative method. Thus, microbubble water combining with ozone (OMB) was applied to disinfect S. Enteritidis spiked on shells at 10⁷ cells per egg. OMB was generated by injecting ozone into a Nikuni microbubble system, then delivered into 10 L of water. After 5, 10, or 20 min of activation time, the eggs were placed into OMB and washed for 30 or 60 s. The controls involved unwashed, water washing, ozone only, and microbubble only (MB). The highest reduction, 5.19 log CFU/egg, was achieved by the combination of 20-min activation and 60-s washing, which was used for following tests of large water quantities. Comparing with the unwashed control, 4.32, 3.73 and 3.07 log CFU/egg reductions were achieved in 25, 80, and 100 L of water, respectively. The other system, Calpeda, with higher motor power was tested in 100 L and obtained a reduction of 4.15 log CFU/egg. The average diameter of bubbles generated by Nikuni and Calpeda pump systems were 29.05 and 36.50 μm, respectively, which both were within the microbubble definition of ISO. Much lower reductions, around 1-2 log₁₀ CFU/egg, were shown with the treatments of ozone only and MB by the same operative parameters. After 15-day storage at ambient temperature, the OMB-treated eggs showed similar sensory quality with the unwashed ones. This is the first study demonstrating that OMB effectively inactivates S. Enteritidis on shell eggs in large quantity of water and does not diminished the sensory characteristics of eggs. Furthermore, bacterial population was under the detection limit in the OMB-treated water.

Preparation of Acidic Electrolyzed Water by a RuO2@TiO2 Electrode with High Selectivity for Chlorine Evolution and Its Sterilization Effect

The food hygiene problems caused by bacterial biofilms in food processing equipment are directly related to human life safety and health. Therefore, it is of great strategic significance to study new food sterilization technology. An acidic electrolyzed water (AEW) disinfectant is an electrochemical sterilization technology which has the characteristics of wide adaptability, high efficiency, and environmental friendliness. However, since the sterilization efficiency of AEW for biofilms is not ideal, it is necessary to increase the available chlorine content (ACC) in AEW. A feasible method to increase the ACC is by increasing the chlorine evolution reaction (CER) selectivity of the electrode for AEW preparation. In this paper, the RuO₂@TiO₂ electrode was prepared by thermal decomposition combined with high-vacuum magnetron sputtering. Compared with the oxygen evolution reaction (OER) activity of an ordinary RuO₂ electrode, the OER activity of the RuO₂@TiO₂ electrode is significantly reduced. However, the CER activity of the RuO₂@TiO₂ electrode is close to the OER activity of RuO₂. The CER mechanism of the RuO₂@TiO₂ electrode is the second electron transfer, and the OER mechanism is the formation and transformation of OH_ads. The potential difference between the CER and OER of the RuO₂@TiO₂ electrode is 174 mV, which is 65 mV higher than that of the RuO₂ electrode, so the selectivity of the CER of the RuO₂@TiO₂ electrode is remarkably improved. During the preparation of AEW, the ACC obtained with the RuO₂@TiO₂ electrode is 1.7 times that obtained with the RuO₂ electrode. In the sterilization experiments on Escherichia coli and Bacillus subtilis biofilms, the logarithmic killing values of AEW prepared the by RuO₂@TiO₂ electrode are higher than those of AEW prepared by the RuO₂ electrode.

Application of Electrolyzed Water in the Food Industry: A Review

Electrolyzed water is a novel disinfectant and cleaner that has been widely utilized in the food sector for several years to ensure that surfaces are sterilized, and that food is safe. It is produced by the electrolysis of a dilute salt solution, and the reaction products include sodium hydroxide (NaOH) and hypochlorous acid. In comparison to conventional cleaning agents, electrolyzed water is economical and eco-friendly, easy to use, and strongly effective. Electrolyzed water is also used in its acidic form, but it is non-corrosive to the human epithelium and other organic matter. The electrolyzed water can be utilized in a diverse range of foods; thus, it is an appropriate choice for synergistic microbial control in the food industry to ensure food safety and quality without damaging the organoleptic parameters of the food. The present review article highlights the latest information on the factors responsible for food spoilage and the antimicrobial potential of electrolyzed water in fresh or processed plant and animal products.

Advanced catalytic ozonation for degradation of pharmaceutical pollutants-A review

Various chemical treatment techniques are involved in removing refractory organic compounds from water and wastewater using the oxidation reaction of hydroxyl radicals (^•OH). The use of catalysts in advanced catalytic ozonation is likely to improve the decomposition of molecular ozone to generate highly active free radicals that facilitate the rapid and efficient mineralization and degradation of numerous organics. For the degradation of toxic organic pollutants in wastewater, the advanced catalytic ozonation process has been widely applied in recent years. Low utilization efficiency of ozone and ineffective mineralization of organic contaminants by ozone can be remedied with advanced catalytic ozonation. Advanced catalytic ozonation has gained popularity because of these merits. However, homogeneous catalytic ozonation has the disadvantage of producing secondary contaminants from the addition of metallic ions. Heterogeneous catalytic ozonation can overcome this drawback by utilizing metals, metallic oxides, and carbon materials as a catalyst of efficacy and stability. This review discusses various aspects of catalytic ozonation in wastewater treatment of pharmaceutical pollutants, application of catalytic ozonation process in typical wastewater, and prospects in advancing the techniques in heterogeneous catalytic ozonation.

Detrimental Effect of Ozone on Pathogenic Bacteria

(1) Background: Disinfection of medical devices designed for clinical use associated or not with the growing area of tissue engineering is an urgent need. However, traditional disinfection methods are not always suitable for some biomaterials, especially those sensitive to chemical, thermal, or radiation. Therefore, the objective of this study was to evaluate the minimal concentration of ozone gas (O₃) necessary to control and kill a set of sensitive or multi-resistant Gram-positive and Gram-negative bacteria. The cell viability, membrane permeability, and the levels of reactive intracellular oxygen (ROS) species were also investigated; (2) Material and Methods: Four standard strains and a clinical MDR strain were exposed to low doses of ozone at different concentrations and times. Bacterial inactivation (cultivability, membrane damage) was investigated using colony counts, resazurin as a metabolic indicator, and propidium iodide (PI). A fluorescent probe (H₂DCFDA) was used for the ROS analyses; (3) Results: No reduction in the count colony was detected after O₃ exposure compared to the control group. However, the cell viability of E. coli (30%), P. aeruginosa (25%), and A. baumannii (15%) was reduced considerably. The bacterial membrane of all strains was not affected by O₃ but presented a significant increase of ROS in E. coli (90 ± 14%), P. aeruginosa (62.5 ± 19%), and A. baumanni (52.6 ± 5%); (4) Conclusion: Low doses of ozone were able to interfere in the cell viability of most strains studied, and although it does not cause damage to the bacterial membrane, increased levels of reactive ROS are responsible for causing a detrimental effect in the lipids, proteins, and DNA metabolism.

Research Trends on the Application of Electrolyzed Water in Food Preservation and Sanitation

Electrolyzed water (EW) has been proposed as a novel promising sanitizer and cleaner in recent years. It is an effective antimicrobial and antibiofilm agent that has several advantages of being on the spot, environmentally friendly, cheap, and safe for human beings. Therefore, EW has been applied widely in various fields, including agriculture, food sanitation, livestock management, medical disinfection, clinical, and other fields using antibacterial technology. Currently, EW has potential significance for high-risk settings in hospitals and other clinical facilities. The research focus has been shifted toward the application of slightly acidic EW as more effective with some supplemental chemical and physical treatment methods such as ultraviolet radiations and ultrasound. This review article summarizes the possible mechanism of action and highlights the latest research studies in antimicrobial applications.

Non-thermal Technologies for Food Processing

Food is subjected to various thermal treatments during processes to enhance its shelf-life. But these thermal treatments may result in deterioration of the nutritional and sensory qualities of food. With the change in the lifestyle of people around the globe, their food needs have changed as well. Today's consumer demand is for clean and safe food without compromising the nutritional and sensory qualities of food. This directed the attention of food professionals toward the development of non-thermal technologies that are green, safe, and environment-friendly. In non-thermal processing, food is processed at near room temperature, so there is no damage to food because heat-sensitive nutritious materials are intact in the food, contrary to thermal processing of food. These non-thermal technologies can be utilized for treating all kinds of food like fruits, vegetables, pulses, spices, meat, fish, etc. Non-thermal technologies have emerged largely in the last few decades in food sector.