Insights into the multi-scale structure and in vitro digestibility changes of rice starch-oleic acid/linoleic acid complex induced by heat-moisture treatment

New insights into starch, lipid, and protein interactions - Colon microbiota fermentation

Starch, lipids, and proteins are essential biological macromolecules that play a crucial role in providing energy and nutrition to our bodies. Interactions between these macromolecules have been shown to impact starch digestibility. Understanding and controlling starch digestibility is a key area of research. Investigating the mechanisms behind the interactions of these three components and their influence on starch digestibility is of significant practical importance. Moreover, these interactions can result in the formation of resistant starch, which can be fermented by gut microbiota in the colon, leading to various health benefits. While current research has predominantly focused on the digestive properties of starch in the small intestine, there is a notable gap in understanding the colonic microbial fermentation phase of resistant starch. The benefits of fermentation of resistant starch in the colon may outweigh its glucose-lowering effect in the small intestine. Thus, it is crucial to study the fermentation behavior of resistant starch in the colon. This paper investigates the impact of interactions among starch, lipids, and proteins on starch digestion, with a specific focus on the fermentation phase of indigestible carbohydrates in the colon. Furthermore, valuable insights are offered for guiding future research endeavors.

Improvement of resistant starch content and thermal-stability of starch-linoleic acid complex: An attempt application in extruded recombinant rice

The utilization of resistant starch in food industry is restricted due to its susceptibility to thermal degradation. This work aimed to address this issue by preparing a starch-linoleic acid complex (RS5) via extrusion method combined with heat moisture treatment, obtaining VII-type crystal (melting temperature ∼110 °C). The complex obtained through an 8-hour heat moisture treatment exhibited a high RS content of 46.7 %. The glycemic index (pGI) values predicted by two different methods for this complex were 54.5 and 64.2. The complex was further processed into recombinant rice, which exhibited similar textural properties to commercial rice products after cooking. Notably, the recombinant rice maintained an anti-enzyme structure (VII-type complex) as evidenced by its significant resistant starch content of 38.1 %, the lowest pGI values of 59.6 and 72.5. These findings could serve as a useful reference to aid in developing low glycemic index foods based on starch.

Interactions between pectin, starch and linoleic acid and their effects on starch structure, digestion and release properties

This study aimed at gaining insight into the mechanism of interactions between pectin (PE), starch and unsaturated fatty acids (UFAs) in relation to structure, in vitro digestibility and release properties of starch. Due to the barrier and encapsulation effects of PE, the complexing behavior of potato starch (PtS) with linoleic acid (LOA) was enhanced, which increased the complexing index, the compactness of network structure, short-range ordered structure and relative crystallinity of PtS-LOA-PE films. These structural changes resulted in the increases of slowly digestible starch and resistant starch and in the decreases of first-order rate coefficient in PtS-LOA-PE films. Besides, the in vitro release results also showed that the release properties of PtS-LOA could be controlled by the PE addition with the decreases in LOA release rate and increase in LOA bioavailability under simulated gastrointestinal conditions. Notably, at different PtS-LOA:PE ratios, the PtS-LOA-PE film with the PtS-LOA:PE ratio of 5:1 showed the better complexing degree, structural order, anti-digestibility and colon-targeted release properties than other PtS-LOA-PE films. These results indicated that PE influenced the release properties of the PtS-LOA-PE films, which was closely related to their complexing degree, structural order, and digestibility. This study provided new insights into the design of resistant films for delivery of UFAs to colon.

Pre-dry heat treatment alters the structure and ultimate in vitro digestibility of wheat starch-lipids complex in hot-extrusion 3D printing

Herein, we proposed dry heat treatment (DHT) as a pre-treatment method for modifying printed materials, with a particular focus on its application in the control of starch-lipid interactions during hot-extrusion 3D printing (HE-3DP). The results showed that pre-DHT could promote the complexation of wheat starch (WS) and oleic acid (OA)/corn oil (CO) during HE-3DP and thus increase the resistant starch (RS) content. From the structural perspectives, pre-DHT could break starch molecular chains into lower relative molecular weight which enhanced the starch-lipids hydrophobic interactions to form the V-type crystalline structure during HE-3DP. Notably, pre-DHT could also induce the formation of complexed structure which was maintained during HE-3DP. Compared with CO, OA with linear hydrophobic chains was easier to enter the spiral cavity of starch to form more ordered structures, resulting in higher RS content of 27.48 %. Overall, the results could provide basic data for designing nutritional starchy food systems by HE-3DP.

Rice starch modification by thermal treatments with avocado oil: Autoclave versus microwave methods

This study aimed to evaluate the physical and chemical alterations in rice starch modified by heat-moisture treatment (HMT) using an autoclave and a microwave, in association with avocado oil (AO), and evaluate the effects on thermal and structural properties, in vitro digestibility, and estimated glycemic index (eGI). Samples were adjusted to 30 % (w/w) moisture and 2, 4 and 8 % AO. HMT was conducted at 110 °C for 1 h in the autoclave (A0%, A2%, A4%, and A8%) and at 50 °C for 3 min in the microwave (M0%, M2%, M4%, and M8%). Both procedures did not alter the starch crystallinity pattern (type-A). Pasting viscosity, setback, relative crystallinity, and gelatinisation enthalpy decreased as the AO content increased in both HMT processes. The M8% showed reduced digestibility, decreased eGI (72.99, p < 0.05), and lower starch hydrolysis concentration (62.75 %, p < 0.05). The application of HMT with the addition of AO may be an interesting process for obtaining resistant starch since its content increased after both treatments (A8%, M4%, and M8%). The microwave process proved efficient, making it possible to use a lower temperature, less time, and less energy for modification and obtain starches with improved characteristics.

Butyryl group distribution modulates the structure and properties of butyrylated maize starch focused on amylose contents

In this study, four types of maize starch with different amylose contents (3 %, 25 %, 40 %, and 70 %) were used to prepare butyrylated starches. Based on amylose contents, the influence of butyryl group distribution on the structure, thermal and digestive properties of butyrylated maize starch was investigated. The butyrylation reaction mainly substituted butyryl groups on amylose, and the butyryl groups were most easily substituted for the hydroxyl group at the C6 position. The degree of substitution of butyrylated starch reached its maximum when the amylose content was 40 %, and the degree of substitution did not correlate linearly with the amylose content. The butyrylation reaction increased the surface roughness, decreased the crystallinity, enthalpy value and molecular weight of native starch granules, resulting in a decrease in the degree of internal order of the starch and inducing the rearrangement of the amylose molecular chains in the amorphous region of the starch. The combination of the amylose content and the substitution of butyryl groups on amylose affected the digestibility of starch and ultimately increased its resistance. The Pearson correlation coefficient further confirmed the correlation between the distribution of butyryl groups and the structure and properties of butyrylated starch.

Inhibition mechanism of rice glutelin on extruded starch digestion: From the structural properties of starch and enzyme activity

To increase the anti-digestion ability of extruded rice starch (ERS), the influence of rice glutelin (RG) on digestive and structural characteristics of ERS were investigated. The resistant starch content increased from 4.49 % to 18.08 % as the RG content increased, while the digestion rate and digestion velocity constant were reduced by the incorporation of RG. Morphological observations showed that ERS was adhered and encapsulated by RG, and the specific area of starch granules were decreased after the addition of RG. The results of XRD and FTIR suggested that the long-range and short-range orders of ERS were improved due to the complexation with RG. The thickness of crystalline of ERS was increased while its amorphous region thickness was reduced by the supplementation with RG. The 1H NMR and 13C NMR data revealed that the branching degree and double helix content of ERS was increased by 46.24 % and 52.67 % when RG content reached to 12 %. Additionally, the addition of RG altered the molecular weight and chain length distribution of ERS. The α-amylase activity and glucoamylase activity was inhibited by RG. These results could provide a valuable basis for the application of RG in extruded rice starchy foods with lower glycemic index.

Evaluation of Quality Properties of Brown Tigernut (Cyperus esculentus L.) Tubers from Six Major Growing Regions of China: A New Source of Vegetable Oil and Starch

Tigernut has been recognized as a promising resource for edible oil and starch. However, the research on the quality characteristics of tigernut from different regions is lagging behind, which limits the application of tigernut in food industry. Tigernut tubers were obtained from six major growing regions in China, and the physicochemical properties of their main components, oil and starch, were characterized. Tigernut tubers from Baoshan contained the most oil (30.12%), which contained the most β-carotene (130.4 µg/100 g oil) due to high average annual temperature. Gas chromatography analysis and fingerprint analysis results indicated that tigernut oil (TNO) consists of seven fatty acids, of which oleic acid is the major component. Changchun TNO contained the least total tocopherols (6.04 mg/100 g oil) due to low average annual temperature. Tigernut tubers from Chifeng (CF) contained the most starch (34.85%) due to the large diurnal temperature range. Xingtai starch contained the most amylose (28.4%). Shijiazhuang starch showed the highest crystallinity (19.5%). Anyang starch had the highest pasting temperature (76.0°C). CF starch demonstrated superior freeze-thaw stability (syneresis: 50%) due to low mean annual precipitation. The results could be further applied to support tigernut industries and relevant researchers that looks for geographical origin discrimination and improvements on tigernut quality, with unique physicochemical and technological properties.

Starch ordered structures control starch reassembly behaviors during heat-moisture treatment for modulating its digestibility

This study investigated the effect of starch crystallinity on starch reassembly behaviors during the heat-moisture treatment (HMT) using starches with A-type crystal content of 0.00%-19.03%. The results showed that HMT reduced the native starch crystal content from 19.03% to 15.02% and increased starch thermostability, leading to a decrease in rapidly digestible starch (RDS) content from 86.91% to 76.71%. Moreover, starches containing a crystal content of 2.51%-8.11% exhibited significant reassembly during the HMT, and the resulting modified starches had more crystals and less RDS of 63.43%-69.31%. Interestingly, starches lacked A-type crystals but had some helical structures exhibiting A-type crystalline structures and lower digestibility after HMT. These findings verified that starch could significantly reassemble to form crystalline structures during the HMT. Controlling the crystal content of starch granules, particularly between 2.51% and 8.11%, was a promising approach for promoting starch reassembly during HMT and reducing starch digestibility.

Polyphenol-fortified extruded sweet potato starch vermicelli: Slow-releasing polyphenols is the main factor that reduces the starch digestibility

To investigate the digestive behavior of extruded starch-polyphenols system, extruded sweet potato starch vermicelli (ESPSV) was used as a model. The multi-scale structure, starch digestibility, polyphenol release, digestive enzyme activity during digestion and their correlation of ESPSV supplemented with matcha (MT), green tea extract (GTE), tea polyphenols (TP) and epigallocatechin gallate (EGCG) (at 1% polyphenol level) were discussed. Results showed that tea products in whatever form could retard starch digestion, with EGCG working best. The predicted glycemic index (pGI) of ESPSV was decreased from 82.50 to 65.46 after adding EGCG. Starch formed larger molecular aggregates with tea products under extrusion, showing a "B + V" type pattern. The order of V-type crystals content was EGCG + ESPSV (1.41) > TP + ESPSV (1.50) > GTE + ESPSV (1.88) > MT + ESPSV (2.62) > ESPSV (3.20). Under external pressure, EGCG, as tea monomer, was more likely to enter the spiral cavity of amylose and form V-type inclusion complex. Notably, polyphenols released during digestion could still reduce digestive enzyme activity, with a 15.53% decrease in EGCG + ESPSV compared to ESPSV. This was verified by correlation analysis, where RDS content (0.961, p < 0.01) and pGI (0.966, p < 0.01) were highly significantly correlated with the enzyme activity. Furthermore, tea products did not break or even enhance the quality of ESPSV as the final product.

Characterization, in vitro digestibility and release properties of starch-linoleic acid-sodium alginate composite film

This study aimed to improve the complexing degree, digestibility and controlled release properties of the potato starch (PS)-linoleic acid (LA) complexes by encapsulating PS-LA complexes to sodium alginate (AG) beads. The results revealed that AG had a positive effect on the complexing index, R1047/1022 values, relative crystallinity, enthalpy and morphological structure of PS-LA-AG films, especially for PS-LA-AG film with the PS-LA: AG of 5:1. The in vitro digestion and hydrolysis kinetic analysis indicated that AG addition reduced the digestibility of PS-LA-AG films to a higher slowly digestible starch content and resistant starch content and a lower equilibrium hydrolysis percentage and kinetic constant. Furthermore, in vivo release study of PS-LA-AG films indicated a restrained release in simulated gastrointestinal conditions. Consequently, the results indicated that AG addition significantly improved the inclusion efficiency for the complex formation between PS and LA, which was beneficial for the design of resistant films to entrap and control release of unsaturated fatty.

Recent progress in regulating starch digestibility using natural additives and sustainable processing operations

The development of a healthier and more sustainable food supply is a main concern of consumers, industry, governments, and international institutions. Foods containing high levels of rapidly digestible starches have been linked to a rise in the number of people suffering from diet-related chronic diseases. Consequently, there is interest in reducing the digestibility of starch to improve their healthiness. The ability of natural additives including proteins, dietary fibers, and polyphenols, and sustainable processing technologies such as high-intensity ultrasonic, pulsed electric field, non-thermal plasma, γ-ray irradiation that regulate reduce starch digestibility in foods are reviewed. The potential mechanisms of action, advantages, and disadvantages of each approach at inhibiting starch digestibility is highlighted. The potential for commercializing these technologies is discussed, and areas where further research are required are emphasized. Natural additives and sustainable processing operations can effectively reduce the digestibility of starch and inhibit postprandial sugar "spikes" in the bloodstream by adjusting the structural changes, which can be used to create healthier and more sustainable foods and have broad application prospects.

The effect of heat-moisture treatment changed the binding of starch, protein and lipid in rice flour to affect its hierarchical structure and physicochemical properties

This study investigated the effect of removing proteins, lipids and starch on the structure, physicochemical properties and digestion properties of rice flour (with 30% moisture) treated with heat moisture treatment (HMT). According to the results, HMT caused the adhesion and agglomeration of the rice flour, promoted the binding between starch, protein and lipid molecular chains and led to the formation of complexes (especially starch-lipid complexes), which hindered the removal of non-starch components. Compared to the untreated rice flour, the HMT treated lipid-removal rice flour had small changes in their crystallinity, gelatinization temperature and viscosity property. After removing protein, the crystallinity, peak viscosity, final viscosity, breakdown and starch digestibility were sharply increased. In particular, the peak viscosity increased from 811 cP to 1746 cP and the enthalpy change increased from 5.33 J/g to 10.18 J/g. These findings are helpful in understanding the contribution of removing endogenous proteins and lipids to the physicochemical changes of HMT treated rice flour during its heating process and thus can be helpful in controlling the quality of rice flour through HMT.

Introduction of chlorogenic acid into thermal processed starch- oleic acid system controls the ordered structure and inhibits oleic acid oxidation through molecular interactions

In this study, the effects of starch- oleic acid (OA)- chlorogenic acid (CA) molecular interaction on OA oxidation during thermal processing were investigated based on structural analysis, oxidation characteristics and quantum calculations. The results showed that in the ternary system, on the one hand, OA could enter the spiral cavity of starch through hydrophobic forces and form V-type crystalline structure, which delayed its oxidation. On the other hand, CA could further inhibit the oxidation of OA through free radical reaction and did not affect the molecular interactions between OA and starch due to the steric hindrance and hydrophily. Notably, starch-OA-CA interactions could effectively decrease total oxidation value (19.07), prolong the induction time of oxidation (114.6 min) and reduce the abundance of oxidation products through hydrogen atom transfer reactions with active phenolic hydroxyl to protect the α-methylene groups at C=C. Overall, these results provided insights into functional property regulation by the interaction of starch-based multi-component systems.

Starch-guar gum-ferulic acid molecular interactions alter the ordered structure and ultimate retrogradation properties and in vitro digestibility of chestnut starch under extrusion treatment

Molecular interactions among starch and multiple-components during food processing determine the retrogradation properties and digestibility of starch. Here, the effects of starch-guar gum (GG)-ferulic acid (FA) molecular interactions on retrogradation properties, digestibility and ordered structural changes of chestnut starch (CS) under extrusion treatment (ET) were investigated by structural analysis and quantum chemistry. Due to the entanglement behaviors and hydrogen bond interactions, GG could inhibit the formation of helical and crystalline structures of CS. When FA was introduced simultaneously, FA could weaken the interactions between GG and CS as well as enter the spiral cavity of starch to increase the single/double helix and V-type crystalline structures while reducing A-type crystalline. Based on the above structural changes, ET with starch-GG-FA molecular interactions resulted in resistant starch content of 20.31% and anti-retrogradation rate of 42.98% for 21-day storage. Overall, the results could provide basic data for creation of chestnut-based food with higher value.

Structural Characteristics, Physicochemical Properties, and Digestibility Analysis of Resistant Starch Type-V Prepared from Debranched Corn Starch and Fatty Acid Complexation

Corn starch was gelatinized and treated with a metagenomic type 1 pullulanase (Pul_M), increasing the proportion of linear glucan chains. The debranched corn starch (DCS), containing amylose helices, was subjected to complexation with fatty acid molecules at moderate temperatures (50-60 °C). The amylose-lipid complexes prepared using saturated fatty acids, e.g., capric acid (CA) and lauric acid (LA), displayed higher CI values as compared to that of unsaturated fatty acid compounds, e.g., undecylenic acids (UAs) and oleic acid (OA). The DCS-fatty acid complex was estimated to contain about 14% of rapidly digested starch (RDS), 26% of slowly digested starch (SDS), and 60% of resistant starch V (RS-5). RS-5 samples exhibited high resistance toward digestive enzymatic hydrolysis. The surface microdetails of RS-5 were examined by scanning electron microscopy (SEM), depicting small spherulite-like structural aggregates. X-ray diffraction pattern analysis estimated about 46% of the crystallinity of RS-5. Thermal attributes of RS-5 were examined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis, depicting the increase in melting enthalpies after the complexation of fatty acid molecules with debranched corn starch. Comparative DSC thermograms divulged a relatively higher stability of RS-5 as compared to that of RS-3. The findings advocated the potentiality of RS-5 (nondigestible DCS-LA complex) as a functional, valuable ingredient in the food industry.

Preparation of the starch-lipid complexes by ultrasound treatment: Exploring the interactions using molecular docking

In this work, Corn Starch (CS)-Lauric acid (LA) complexes prepared by different ultrasound times were explored for multi-scale structure and digestibility. The results showed that the average molecular weight of the CS decreased from 380.478 to 323.989 kDa and the transparency increased to 38.55 % after 30 min of ultrasound treatment. The scanning electron microscope (SEM) results revealed a rough surface and agglomeration of the prepared complexes. The complexing index of the CS-LA complexes increased by 14.03 % compared to the non-ultrasound group. The prepared CS-LA complexes formed a more ordered helical structure and a more dense V-shaped crystal structure through hydrophobic interactions and hydrogen bonding. In addition, fourier transforms infrared spectroscopy and the molecular docking revealed that the hydrogen bonds formed by CS and LA promoted the formation of an ordered structure of the polymer, retarding the diffusion of the enzyme and thus reducing the digestibility of the starch. With correlation analysis, we provided insight into the multi-scale structure-digestibility relationship in the CS-LA complexes, which provided a basis for the relationship between structure and digestibility of lipid-containing starchy foods.

Construction of caffeic acid modified porous starch as the dual-functional microcapsule for encapsulation and antioxidant property

A dual-functional food-grade microcapsule, which was constructed by caffeic acid and porous starch was obtained. Caffeic acid modified porous starch (CA-PS) was accordingly synthesized successfully by esterification. Carbonyl signal observed by ¹³C solid state NMR (170 ppm) and FT-IR (1745 cm^-1), indicating the formation of ester bond. BET of CA-PS was determined as 44.8 m²/g by N₂ adsorption analysis. The results proved CA-PS has both excellent adsorption and antioxidant activity. Furthermore, it has been applied for encapsulation of linoleic acid (LA) to prevent its degradation effectively, because LA adsorbed in porous adsorbents without antioxidant activity may still suffer serious oxidation. Besides, ¹H NMR Integral of LA did not show a significant decay. This observation demonstrated CA-PS indeed has the better performance on protection of LA than PS. We expect this work will boost research on designing and employing multi-functional starchy materials for further applications.

Heat-moisture modified blue wheat starch: Physicochemical properties modulated by its multi-scale structure

Blue wheat starch was modified by heat-moisture treatment (HMT) with varying moisture contents (MCs). Changes in physicochemical properties were evaluated on the basis of its multi-scale structure. Following HMTs with MC below 30 %, the starch remained brighter and presented total phenolics content up to 0.20 mg/g. As treating MC increased, structural disruptions became more pronounced, which were characterized by crystallinity loss, lamellae's loosening, hydrogen bonding breakage, and debranching. Furthermore, HMTs decreased the proportion of external A chains of amylopectin. Concomitantly, modified starches showed progressively increased transition temperatures but decreased enthalpy values. Despite the swelling power decrease, HMTs with MC of 15 % showed markedly higher peak viscosity than control, as a result of the more compact semi-crystalline lamellae and homogenous electron distribution. Besides, all HMT-starches showed lowered breakdown and setback. This novel modified starch would be promising ingredients for modulating the viscoelasticity of healthy anti-staling staple foods.

Structural, physicochemical properties, and digestibility of lotus seed starch-conjugated linoleic acid complexes

This paper describes a new method combining octenyl succinic anhydride (OSA) esterification and high hydrostatic pressure for starch modification, which interacts with conjugated linoleic acid (CLA) to form an octenyl succinic anhydride-lotus seed starch-conjugated linoleic acid (OSA-LS-CLA) complex. This method proves the formation of complex observed by fourier transform infrared spectroscopy and complex index. The stable structure of the complex was derived from increasing molecular weight by introducing macromolecular conjugated linoleic acid and the higher crystallinity than original starch observed by X-ray diffraction. The formation method and changes of complex were observed by scanning electron microscopy and confocal laser scanning microscope. The solubility and swelling power of the complex increases as the temperature increased, significantly at 75 °C. The formation of the OSA-LS-CLA complex significantly reduced the digestion rate of LS, which was 26 % lower than that of LS. These results indicate that the OSA-LS-CLA under high hydrostatic pressure can form a complex with stable structure, which makes up for the deficiency of raw starch to a certain extent. And the formation of this structure can improve the thermal stability of the complex and has strong digestion resistance, which provides a potential direction for further research in reducing starch digestibility.

Changes in structures and digestibility of amylose-oleic acid complexes following microwave heat-moisture treatment

Amylose-oleic acid complexes (AOA) were exposed to microwave heat-moisture treatment (M-HMT) with different moisture content (MC), and the variations in structures and digestibility were investigated. M-HMT caused the dissociation of helical structures and destruction of short-range molecular order of AOA. Meanwhile, the molecules of amylose and oleic acid rearranged and more amylose-oleic acid complexes were formed during M-HMT, the complexing index of AOA was increased from 25.41 % to 41.20 % when treating at 35 % MC. Moreover, the relative content of single helix increased with increasing MC, resulting in higher V-type relative crystallinity. With ≥30 % MC, the treated complexes showed greater thermostability than that of original AOA. The treatment increased the enzymatic digestibility of AOA, and sample treated with 35 % MC had the highest resistant starch content of 82.33 %, which was 17.96 % higher than that of native AOA. The improved enzyme resistance should be correlated to increased molecular interplay and formation of amylose-oleic acid complexes.

Control of starch-lipid interactions on starch digestibility during hot-extrusion 3D printing for starchy foods

The nutritional design of personalized starchy foods has become a research hotspot in the field of food science. Driven by the immense functional and nutritional implications of starch-lipid binary interactions, this study is aimed at designing starch digestibility by controlling the interaction between starch and glycerol monostearate (GMS)/stearic acid (SA) using a hot-extrusion 3D printing (HE-3DP) environment. The results indicated that the thermal shear force in the HE-3DP environment promoted hydrophobic interactions between starch and lipids, forming a V-type starch-lipid complex with a compact and ordered structure, thus enhancing enzymatic resistance. Compared with GMS, SA with linear hydrophobic chains was inclined to compound with starch to form a more ordered structure. Interestingly, the slowly digestible starch (SDS) and resistant starch (RS) content reached 25.06% when the added SA content was 10%. Besides, correlations between the structural parameters and digestibility were established, which provided crucial information for designing nutritional starchy food systems using HE-3DP.

Grain starch, fatty acids, and amino acids determine the pasting properties in dry cultivation plus rice cultivars

A field experiment was conducted to explore the effects of cultivars under flooding irrigation and dry cultivation (D) on starch, fatty acids, and amino acids metabolism, starch physicochemical traits, and pasting properties of rice flour. In this study, high-quality cultivar (HH) had better pasting properties among all other cultivars in D treatment. DHH supported higher short-branch chain amylopectin to develop the crystalline regions. Besides, DHH increased C16:0, C16:1, C18:1, C18:2, glutamate, aspartate, lysine, and threonine, and reduced glutelin and prolamine levels in head rice. Higher pasting properties in DHH was also supported by higher CO in esters and ketones, CO in carboxylic acid, esters, alcohols, and ethers, OH in alcohols before pasting and lower CO and CO in carboxylic acid, CO in aldehydes, and CO, CO and OH in carboxylic acid after pasting. Overall, these findings improve pasting properties to maintain a higher cooking quality in dry cultivation.

Dry cultivation with ratoon system impacts rice quality using rice flour physicochemical traits, fatty and amino acids contents

A field experiment was conducted to explore the impact on rice quality using high-quality (HH) or drought-resistant (HY) cultivars under flooding irrigation (F) or dry cultivation (D) in ratooning rice system by evaluating the metabolism or physicochemical traits of starch, fatty acids, and amino acids affecting grain quality. Compared to FHY and DHY in the main or ratoon season, DHH in ratoon season (DHHR) exhibited a higher appearance and processing quality but lower cooking quality. DHHR mainly synthesized long branch chain amylopectin to construct the crystalline regions with increased crystallinity, crystallites size, interplanar spacing, dislocation density, Asp and Thr in brown and head rice. Also, it accumulated more of C16:0, C18:0, C18:1, C18:2, and C18:3 but reduced glutelin in head rice. An increase in functional groups and diversity was seen in brown and head rice, respectively. Overall, these traits improved the processing, appearance, and pasting quality of DHHR.

Modification in physicochemical, structural and digestive properties of pea starch during heat-moisture process assisted by pre- and post-treatment of ultrasound

Ultrasound is increasingly used for physicochemical modification of food systems as a green technology. Effects of heat-moisture treatment (HMT) assisted by pre- and post-treatment of ultrasound on physicochemical, structural and digestive properties of pea starch was investigated. Pea starch maintained the original morphology and C-type of crystalline after ultrasound treatment (UT), but 4 h or more of HMT and HMT assisted by UT changed the crystalline from C-type to A-type. All treatments decreased the crystallinity, molecular weight, swelling power and solubility at 70-90 °C, and elevated the content of resistant starch. Moreover, HMT assisted by pretreatment of UT was found to increase the viscosity and high-temperature stability of starch paste compared with others by the orderly combined effect of UT-induced depolymerization and HMT-induced depolymerization and rearrangement of starch chains. These results may promote the appropriate use of ultrasound in food industries and the production of starch materials for potential applications.

Effects of cultivars and fertilization levels on the quality of rice milling: A diagnosis using near-infrared spectroscopy, X-ray diffraction, and scanning electron microscopy

Cultivars and fertilization levels influence rice productivity and can be associated with grain quality. Thus, it is possible to make decisions regarding the choice of cultivars and application of fertilizer levels based on the type of milling, a necessary post-harvest process that may minimize the nutrient load in the grains and result in loss in quality. This study relates the physicochemical composition and morphological quality of brown and polished milled rice grains, cultivar types, and different levels of soil fertilization using near-infrared spectroscopy analysis, X-ray diffraction and scanning electron microscopy. Statistical tools were used to test the various treatments and identify the relationship between factors and variables. A high fertilization level is related to increasing crude protein composition and starch for cultivar IRGA 431 CL associated with polished rice. However, the combination of cultivar IRGA 424 RI and brown rice demonstrated a higher grain resistance, and different percentages of whole, chalky, and damaged rice. The correlation between ash × crude protein and starch × crude fiber was found to be positive for brown rice and negative for the polished rice. Further, an increase in starch content was inversely proportional to the ash content, whereas an increase in crude protein was inversely proportional to the low-fat content in milled rice. The crystalline characteristics of rice starch were preserved at high fertilization levels associated with polished grains that demonstrated high starch content. Polished grains, however, showed more pores and cavities, and consequently greater permeabilities in the surface. It is recommended that batches of grains produced from cultivar IRGA 431 CL with high levels of fertilization be subjected to polished rice milling to achieve high protein and starch quality. However, grains from cultivar IRGA 424 RI with high levels of fertilization are recommended for brown rice milling owing to the high percentage of physical defects observed.

The assisting effects of ultrasound on the multiscale characteristics of heat-moisture treated starch from Agriophyllum squarrosum seeds

Present study was aimed to characterize the effects of heat-moisture treatments supported by ultrasound on structural, physicochemical and digestive properties of the starch from Agriophyllum squarrosum seeds. The starch sample was subjected to heat-moisture (120°C, 25% moisture) for different durations with assisting by pre- or post-treatment of ultrasound (20 Hz, 300 W, 20 min). A. squarrosum starch exhibited the original A-type of crystalline structure after all treatments. All modified starches had lower amylose content, amylopectin molecular weight, swelling power and solubility, and higher resistant starch content than the native starch. Heat-moisture treatments and dual modifications of heat-moisture and ultrasound increased the gelatinization temperature of starch granules and significantly (p ≤ 0.05) reduced the viscosity of starch paste. Pretreatment of ultrasound enhanced the effects of heat-moisture on the viscosity properties while post-treatment of ultrasound weakened which on the gelatinization temperature, by regulating the changes of double helix structure and short-range ordered structure in starch granules tested by Fourier-transform infrared spectrometer. Scanning electron microscopy unveiled that A. squarrosum starch pretreated by ultrasound became more susceptible to heat moisture in morphology. This work was very important for the deep excavation of the characteristics of A. squarrosum starch and the effective application of ultrasound in starch modifications.

Down-Regulation of FAD2-1 Gene Expression Alters Lysophospholipid Composition in the Endosperm of Rice Grain and Influences Starch Properties

Small quantities of lipids accumulate in the white rice grains. These are grouped into non-starch lipid and starch lipid fractions that affect starch properties through association with starch. Lysophosphatidylcholine (LPC) and lysophosphatidylethanolamine (LPE) are two major lipid classes in the two fractions. Using high-oleic rice grains, we investigated the fatty-acid composition in flour and starch by LC-MS and evaluated its impact on starch properties. In the wild-type grain, nearly 50% of fatty acids in LPC and LPE were palmitic acid (C16:0), over 20% linoleic acid (C18:2) and less than 10% oleic acid (C18:1). In the high-oleic rice grain, C18:1 increased at the expense of C18:2 and C16:0. The compositional changes in starch lipids suggest that LPC and LPE are transported to an amyloplast with an origin from endoplasmic reticulum-derived PC and PE during endosperm development. The high-dissociation temperature of the amylose-lipid complex (ALC) and restricted starch swelling power in the high-oleic rice starch indicates that the stability of the ALC involving C18:1 is higher than that of C18:2 and C16:0. This study provides insight into the lipid deposition and starch properties of rice grains with optimized fatty-acid composition.

Study on the structure and digestibility of high amylose Tartary buckwheat (Fagopyrum tataricum Gaertn.) starch-flavonoid prepared by different methods

Tartary buckwheat (Fagopyrum tataricum Gaertn.) is the only food rich in flavonoid bioactive substances in grains. Studies have shown that flavonoids interaction with amylose has an important impact on the physical and chemical properties and structure of starch. In this study, Tartary buckwheat was used as a raw material. It was then threshed with pullulanase, and a high amylose Tartary buckwheat starch flavonoid complex (HBS/BF) was prepared by physical mixing (PM), water bath treatment (WT), acid-base precipitation (AP), microwave treatment (MT), and ultrasonic treatment (UT); the physical and chemical properties were then evaluated. The results show that HBS/BF-UT and HBS/BF-MT have a higher iodine binding rate than HBS/BF-PM; X-ray diffraction results show that HBS/BF-AP has a V-type crystal form, but the relative crystallinity was reduced. Fourier infrared spectroscopy showed that there is no new covalent bond between Tartary buckwheat starch and flavonoids. In vitro digestion showed that adding flavonoid significantly increased the digestibility of Tartary buckwheat starch. PRACTICAL APPLICATION: These results will provide a theoretical basis for further starch anti-digestion mechanisms and the preparation of resistant starch. These steps will provide insights into the application of Tartary buckwheat starch and flavonoids in the food industry.

Recent advances in heat-moisture modified cereal starch: Structure, functionality and its applications in starchy food systems

Cereals, one of the starch sources, have a tremendous and steady production worldwide. Starchy foods constitute the major part of daily calorie intake for humans. As a simple and green modification approach, heat-moisture treatment (HMT) could change the granular surface characteristics and size, crystalline and helical structure, as well as molecular organization of cereal starch. The changing degree is contingent on HMT parameters and botanical origin. Based on the hierarchical structure, this paper reviews functionalities of heat-moisture modified cereal starch (HMCS) reported in latest years. The functionality of HMCS could be affected by co-existing non-starch ingredients through non-covalent/covalent interactions, depolymerization or simply attachment/encapsulation. Besides, it summarizes the modulation of HMCS in dough rheology and final food products' quality. Selecting proper HMT conditions is crucial for achieving nutritious products with desirable sensory and storage quality. This review gives a systematic understanding about HMCS for the better utilization in food industry.