Recent progress in the preparation, chemical interactions and applications of biocompatible polysaccharide-protein nanogel carriers

Effect of curdlan on the gel properties and interactions of whey protein isolate gels

This study investigated the influence of curdlan on the gel properties of whey protein isolate (WPI). Results demonstrated that curdlan significantly improved the water-holding capacity, gel strength and rheological properties of the WPI gels. Moreover, it promoted the unfolding of the molecular structures of WPI, which was manifested by the transition from α-helix to β-sheet, an increase in free sulfhydryl content and a decrease in surface hydrophobicity. Furthermore, 4 % curdlan promoted the formation of WPI with uniform and compact elastic gel network structures, primarily attributed to disulphide bonds, hydrogen bonds and hydrophobic interactions. However, when the addition of curdlan exceeds 4 %, excessive entanglement of curdlan chains and steric hindrance effects hinder the unfolding and folding of protein structures, weaken their interaction, result in a loose network structure and affect the gel properties. In conclusion, this study demonstrates that curdlan can effectively improve the gelling properties of WPI, suggesting its potential application in low-calorie gel-based dairy products.

Novel hydroxyl-terminated hyperbranched polymer as a synergistic modifier with tannin for preparation of casein-based films with superior performance

A hyperbranched poly (titanium oxide) (HBPTi) with hydroxyl terminal groups was synthesized via polycondensation reaction as a synergistic modifier with tannin to promote performance of casein-based composite film. The synergistic effects of HBPTis, acquiring different hyperbranched structures, with tannin on the microstructure, mechanical characteristics, barrier against water vapor, and thermal stability of casein-based film were investigated in this work. The tensile strength of the composite films increased from 7.6 MPa to 22.1 MPa, which accounts for 190.79 % increase after the addition of HBPTi compared to casein-tannin films modified with glycerol. The casein-tannin films with the help of HBPTi presented excellent water vapor permeation, thermal stability, and showed nearly 100 % UV absorption in the range 200-400 nm. Additionally, the microstructure of HBPTi modified casein-tannin films tend to be more compact due to the promoted interaction of casein-tannin composite aided by covalent bonding and/or other types of bonding between casein, tannin and HBPTi. Therefore, associative modification using such hyperbranched polymers and tannins provides extendable application value for casein-based films especially as food packaging materials and for other fields as well.

An "in control" hyaluronic acid nanogel with light-cleavable for rational use of antibiotics

The consequences caused by bacterial resistance are becoming more and more serious. The rate of antibiotic development is far behind the rate of bacterial resistance, so it is urgent to develop a new drug system. In this study, photoresponsive nanogels based on hyaluronic acid were prepared and loaded with ciprofloxacin as a model molecule. The results showed that the nanogels had the advantages of high stability and good cytocompatibility. The inhibition effect of drug-loaded nanogels after light irradiation on the growth of Staphylococcus aureus and Salmonella typhimurium was significantly better than that before light irradiation, and ciprofloxacin could be released on demand and in control. This strategy is of great significance to reduce the unnecessary use of antibiotics and weaken bacterial resistance.

Binary Pea Protein-Psyllium Hydrogel: Insights into the Influence of pH and Ionic Strength on the Physical Stability and Mechanical Characteristics

Food hydrogels, used as delivery systems for bioactive compounds, can be formulated with various food-grade biopolymers. Their industrial utility is largely determined by their physicochemical properties. However, comprehensive data on the properties of pea protein-psyllium binary hydrogels under different pH and ionic strength conditions are limited. The aim of this research was to evaluate the impact of pH (adjusted to 7, 4.5, and 3) and ionic strength (modified by NaCl addition to 0.15 and 0.3 M) on the physical stability, color, texture, microrheological, and viscoelastic properties of these hydrogels. Color differences were most noticeable at lower pH levels. Inducing hydrogels at pH 7 (with or without NaCl) and pH 4.5 and 3 (without NaCl) resulted in complete gel structures with low stability, low elastic and storage moduli, and low complex viscosity, making them easily spreadable. Lower pH inductions (4.5 and 3) in the absence of NaCl resulted in hydrogels with shorter linear viscoelastic regions. Hydrogels induced at pH 4.5 and 3 with NaCl had high structural stability, high G' and G" moduli, complex viscosity, and high spreadability. Among the tested induction conditions, pH 3 with 0.3 M NaCl allowed for obtaining a hydrogel with the highest elastic and storage moduli values. Adjusting pH and ionic strength during hydrogel induction allows for modifying and tailoring their properties for specific industrial applications.

A stable delivery system for curcumin: Fabrication and characterization of self-assembling acylated kidney bean protein isolate nanogels

The construction of protein-based nano-gels as curcumin delivery system effectively enhances the stability and bioavailability of curcumin. In this study, acylation modification and self-assembly techniques were jointly employed to construct acylated kidney bean protein isolate (AKBPI)-nanogels. Optimal conditions for AKBPI-nanogels were determined to be pH 7, concentration of 2 mg/mL, and temperature at 90℃ for 30 min. The optimized AKBPI-nanogels exhibited excellent uniformity as evidenced by decreasing average particle size (137.35 nm) and polydispersity index (0.38). Acylation enhanced the intermolecular interactions within the nanogel by reducing the polarity of tyrosine microenvironment and free sulfhydryl groups. AKBPI-nanogels demonstrated remarkable characteristics in terms of pH sensitivity, salt concentration, and storage tolerance. The curcumin-loaded AKBPI-nanogels exhibited an encapsulation efficiency of 92.30 % and maintained high antioxidant activity. In simulated gastrointestinal digestion, AKBPI-nanogels facilitated the controlled release and higher bioavailability of curcumin. Therefore, AKBPI-nanogels can be a stable tool for delivering curcumin.

Porous Functionally Graded Scaffold prepared by a single-step freeze-drying process. A bioinspired approach for wound care

Nowadays, chronic wounds are the major cause of morbidity worldwide and the healthcare costs related to wound care are a billion-dollar issue; chronic wounds involve a non-healing process that makes necessary the application of advanced wound dressings to promote skin integrity recovery. Functionally Graded Scaffolds (FGSs) are currently driving interest as promising candidates in mimicking the skin tissue environment and, thus, in enhancing a faster and more effective wound healing process. Aim of the present work was to design and develop a porous FGS based on κ-carrageenan (κCG) for the management of chronic skin wounds; a freeze-drying process was optimized to obtain in a single-step a three-layered FGS characterized by a pore size gradient functional to mimic the structure of native skin tissue. In addition to κCG, arginine and whey protein isolate were used as multifunctional agents for FGS preparation; these substances can not only intervene in some stages of wound healing but are able to establish non-covalent interactions with κCG, which were responsible for the production of layers with different pore size, water content capability and mechanical properties. Cell migration, adhesion and proliferation within the FGS structure were evaluated in vitro on fibroblasts and FGS wound healing potential was also studied in vivo on a murine model.

Oilseed meal proteins: From novel extraction methods to nanocarriers of bioactive compounds

The global demand for animal proteins is predicted to increase twofold by 2050. This has led to growing environmental and health apprehensions, thereby prompting the appraisal of alternative protein sources. Oilseed meals present a promising alternative due to their abundance in global production and inherent dietary protein content. The alkaline extraction remains the preferred technique for protein extraction from oilseed meals in commercial processes. However, the combination of innovative techniques has proven to be more effective in the recovery and functional modification of oilseed meal proteins (OMPs), resulting in improved protein quality and reduced allergenicity and environmental hazards. This manuscript explores the extraction of valuable proteins from sustainable sources, specifically by-products from the oil processing industry, using emerging technologies. Chemical structure, nutritional value, and functional properties of the main OMPs are evaluated with a particular focus on their potential application as nanocarriers for bioactive compounds.

Design of colloid structure to realize gel salt reduction: a review

Excessive consumption of salt is associated with increased incidence of cardiovascular diseases, hypertension, diabetes, and other health issues. However, it is challenging to find appropriate strategies that balance sensory qualities while achieving sodium reduction as salt plays a crucial role in providing desired appearance, texture, and taste. The impact of hydrocolloid properties (addition and type) on saltiness perception were reviewed. Additionally, considering the interactions between food components, both covalent and noncovalent, we propose designing specialized colloidal structures capable of binding sodium ions to enhance salt-taste perception. The effects of hydrocolloids on the physicochemical, structural, and sensory qualities of gel foods are then discussed. Finally, by addressing current issues with low-salt foods and consumer demands, we provide a future outlook for low-salt food development. The selection of suitable hydrocolloids and precise control of the addition are crucial considerations for achieving salt reduction. The interaction between hydrocolloids and other food components can be utilized to design specialized colloidal structures, thereby accomplishing gel-based salt reduction and enhancing properties. This review serves as a theoretical reference for developing healthy, nutritious, and flavorful low-salt foods that can aid in the prevention and mitigation of diseases associated with excessive salt consumption.

Exopolysaccharide production by salt-tolerant bacteria: Recent advances, current challenges, and future prospects

Natural biopolymers derived from exopolysaccharides (EPSs) are considered eco-friendly and sustainable alternatives to available traditional synthetic counterparts. Salt-tolerant bacteria inhabiting harsh ecological niches have evolved a number of unique adaptation strategies allowing them to maintain cellular integrity and assuring their long-term survival; among these, producing EPSs can be adopted as an effective strategy to thrive under high-salt conditions. A great diversity of EPSs from salt-tolerant bacteria have attracted widespread attention recently. Because of factors such as their unique structural, physicochemical, and functional characteristics, EPSs are commercially valuable for the global market and their application potential in various sectors is promising. However, large-scale production and industrial development of these biopolymers are hindered by their low yields and high costs. Consequently, the research progress and future prospects of salt-tolerant bacterial EPSs must be systematically reviewed to further promote their application and commercialization. In this review, the structure and properties of EPSs produced by a variety of salt-tolerant bacterial strains isolated from different sources are summarized. Further, feasible strategies for solving production bottlenecks are discussed, which provides a scientific basis and direct reference for more scientific and rational EPS development.

Stability of high internal-phase emulsions prepared from phycocyanin and small-molecule sugars

BACKGROUND

The use of high internal-phase Pickering emulsions in the food industry is widespread due to their excellent stability and special rheological properties. Proteins are often used as food-grade Pickering stabilizers due to their safety and nutritious properties. Nowadays, the development and efficient utilization of novel proteins as Pickering stabilizers has become a new challenge.

RESULTS

Phycocyanin complexes with small-molecule sugars (SMS), formed as a result of non-thermal interactions, can serve as stabilizers for high internal-phase Pickering emulsions. The addition of SMS-enabled gel-like emulsions significantly reduced the amount of emulsifier used. When the SMS was sorbitol, the emulsion had excellent elastic properties and self-supporting ability and was stable during long-term storage, when subjected to centrifugation, and under different temperature conditions. The fluorescent property of phycocyanin was utilized to investigate the formation mechanism of the emulsion. Small-molecule sugars were able to form 'sugar-shell' structures on the surface of proteins to enhance the structural stability of proteins. Phycocyanin-SMS-stabilized emulsions provided superior protection for photosensitive and volatile substances. The retention rates of trans-resveratrol and n-hexane increased by 384.75% and 30.55%, respectively.

CONCLUSION

These findings will encourage the development of proteins that stabilize Pickering emulsions. They will also provide new ideas for protecting photosensitive and volatile substances. © 2023 Society of Chemical Industry.

The role of polysaccharides in improving the functionality of zein coated nanocarriers: Implications for colloidal stability under environmental stresses

Zein has gained popularity over the past few years as an incredible food and bio-based materials. The potential functions and health benefits of zein microcapsules or micro-/nanoparticles in bioactive components delivery, structured emulsion, etc., have received great attention. However, the development has been limited by colloidal destabilization, especially when thermal processing is involved. There is a recent trend in developing zein-polysaccharide complexes (ZPCs), which has tremendously improved the performance of zein-based colloidal carrier systems or emulsions. Increasing our understanding of zein interactions and their contribution to the structure of various macromolecules can help us to develop novel biomaterials that can be used in food, agriculture, biomedicine, and cosmetics. In addition, these nanocarriers are suitable for the encapsulation and delivery of bioactive compounds which have positive perspective in food industry. Therefore, this article aimed to review recent advances in the ZPCs that can be applied to functional or health-promoting foods, with a focus on the characteristics of different ZPCs, factors and mechanisms affecting the stability (especially thermal stability) of these complexes, and their application in food industry as a carrier for BCs. Further, the stability of ZPCs based emulsions under processing and physiological environments, as well some typical effective methods are introduced. Also, the principal challenges and prospects were enumerated and discussed.

Multifunctional nanogel based on carboxymethyl cellulose interfering with cellular redox homeostasis enhances phycocyanobilin photodynamic therapy

The redox homeostasis defense mechanism of tumor cells is one of the prime reasons for the unsatisfactory effect of photodynamic therapy (PDT). So far, little attention has been paid to this obstacle. In this work, we reported a synthesizing simple yet versatile nanogel (BCPS), synthesized by cystamine dihydrochloride functionalized sodium carboxymethylcellulose (CMC-SS), bovine serum albumin, and Phycocyanobilin self-assembly. The BCPS reduced the levels of glutathione molecules by reacting with glutathione, thereby interfering with intracellular redox homeostasis and enhancing the sensitivity of tumor cells to PDT. The BCPS was shown to possess excellent serum stability, high blood compatibility, low toxic side effects, and higher reactive oxygen species (ROS) utilization. After irradiation, the BCPS could significantly increase intracellular ROS level by approximately 1.6-fold and decrease the IC50 to HeLa cells by approximately 1.5-fold, compared to the pre-functional drugs BCP. This proposed strategy, based on increasing the utilization rate of ROS in tumor cells is promising for application potentials in tumor therapy.

Application of chitosan and other biopolymers based edible coatings containing essential oils as green and innovative strategy for preservation of perishable food products: A review

Deterioration of perishable foods due to fungal contamination and lipid peroxidation are the most threatened concern to food industry. Different chemical preservatives have been used to overcome these constrains; however their repetitive use has been cautioned owing to their negative impact after consumption. Therefore, attention has been paid to essential oils (EOs) because of their natural origin and proven antifungal and antioxidant activities. Many EO-based formulations have been in use but their industrial-scale application is still limited, possibly due to its poor solubility, vulnerability towards oxidation, and aroma effect on treated foods. In this sense, active food packaging using biopolymers could be considered as promising approach. The biopolymers can enhance the stability and effectiveness of EOs through controlled release, thus minimizes the deterioration of foods caused by fungal pathogens and oxidation without compromising their sensory properties. This review gives a concise appraisal on latest advances in active food packaging, particularly developed from natural polymers (chitosan, cellulose, cyclodextrins etc.), characteristics of biopolymers, and current status of EOs. Then, different packaging and their effectiveness against fungal pathogens, lipid-oxidation, and sensory properties with recent previous works has been discussed. Finally, effort was made to highlights their safety and commercialization aspects towards market solutions.

Rheological and physicochemical properties of heat-induced ovalbumin gels in presence of sodium carboxymethyl cellulose

In this study, the effect of sodium carboxymethylcellulose (CMC-Na) on the rheological and physicochemical properties of heat-induced ovalbumin (OVA) gels was evaluated. The OVA/CMC-Na composite gels were prepared by heat-induced (85 °C, pH 7.0) a mixture of CMC-Na (0, 0.2, 0.4, 0.8 and 1%) and OVA. The results revealed that the addition of CMC-Na dramatically reduced the springiness and hardness of the composite gels, while slightly enhancing the intermolecular hydrogen bonding interactions, which facilitated the improvement of the softness of the gels. It can be observed by SEM that the added CMC-Na was stacked on the surface of the OVA, resulting in visible "linear bumps". All gel samples exhibited shear-thinning behavior. The apparent viscosity of the composite gels increased with the addition of CMC-Na, and the OVA gel with 1% CMC-Na showed the highest apparent viscosity and the lowest storage modulus (G'). Additionally, low field nuclear magnetic resonance (LF-NMR) measurements indicated that the increasing CMC-Na boosted the water mobility of the composite gel. This study offers a novel approach to the development of ovalbumin-based soft gel foods, especially for certain populations with swallowing difficulties.

Rheological property, β-carotene stability and 3D printing characteristic of whey protein isolate emulsion gels by adding different polysaccharides

Emulsion gels with unique structural and mechanical properties have promising applications in 3D food printing. The purpose of this paper was to investigate the rheological property, β-carotene stability and 3D printing characteristic of whey protein isolate (WPI) emulsion gels by adding guar gum (GG), locust bean gum (LBG), xanthan gum (XG) and gum arabic (GA). The results showed that all samples exhibited shear thinning behavior and elastic characteristic. XG could reduce water mobility and increase WHC of WPI emulsion gel. The disulfide bond was the main chemical molecular force of emulsion gels, and XG significantly increased the hydrophobic interactions. GG and LBG increased gel strength, hardness and gumminess, reduced springiness, cohesiveness and chewiness of emulsion gels. GG sample had the best printing performance, more uniform network structure and better stability of β-carotene. This study provided a theoretical basis for 3D printing functional food.

Soybean protein isolate/chitosan complex-rutin microcapsules

Rutin is a flavonoid polyphenol with excellent biological activity, but due to its instability and poor water solubility, the utilization rate is reduced in vivo. Preparation of rutin microcapsules from soybean protein isolate (SPI) and chitosan hydrochloride (CHC) by composite coacervation can improve this restriction. The optimal preparation conditions were as follows: the volume ratio of CHC/SPI 1:8, pH 6, and total concentration of CHC and SPI 2 %. The rutin encapsulation rate and loading capacity of the microcapsules were 90.34 % and 0.51 % under optimal conditions. The SPI-CHC-rutin (SCR) microcapsules had a gel mesh structure and good thermal stability, and the system was stable and homogeneous after 12 d storage. During in vitro digestion, the release rates of SCR microcapsules in simulated gastric and intestinal fluids were 16.97 % and 76.53 %, respectively, achieving a targeted release of rutin in intestinal fluids; and the digested products were found to exhibit superior antioxidant activity to that of free rutin digests, indicating a good protection of microencapsulation on the bioactivity of rutin. Overall, SCR microcapsules developed in this study effectively enhanced the bioavailability of rutin. The present work provides a promising delivery system for natural compounds with low bioavailability and stability.

Fabrication of polydopamine reduced CuO nanoparticle-alginate composite nanogels for management of Pseudomonas synringae pv. tabaci in tobacco

BACKGROUND

The wildfire disease on tobacco can seriously hinder plants. Meanwhile, its pathogen, Pseudomonas syringae, can also infect over 200 plants and threat agriculture production. However, the disease usually occurs after summer rains which washes away most copper (Cu)-based bactericides, allowing the disease to invade. Therefore, we fabricate a new nanogel with high disease control and anti-erosion ability and study the effects of the reductant on the performance of the copper oxide nanoparticle (CuONP) composite nanogel.

RESULTS

Polydopamine (PDA) is a polycation for both in situ reduction of CuONP in alginate nanogels and for adjusting the copper ion (Cu²⁺ ) releasing rate in this work. The composite nanogel fabricated by PDA (PDA-CuONP@ALGNP@CTAC) had a higher Cu²⁺ releasing rate, damaging the pathogen membrane more efficiently, allowing for better disease control and plant growth promotion when compared to sodium borohydride (SBH)-fabricated nanogel (SBH-CuONP@ALGNP@CTAC) or the commercial bactericide, thiodiazole copper. The PDA-CuONP@ALGNP@CTAC had a high anti-erosion ability and could remain adhered to the leaf surface even after five rain event simulations.

CONCLUSION

The addition of polycations (like PDA) into CuONP composite nanogel could increase the Cu²⁺ releasing rate, resulting in improved disease management when compared to SBH-CuONP@ALGNP@CTAC or thiodiazole copper. The PDA containing gel had an improved anti-erosion ability and water resistance. This new composite nanogel has a high potential for wildfire disease control, improving agricultural production. © 2022 Society of Chemical Industry.

Emerging plant proteins as nanocarriers of bioactive compounds

The high prevalence of chronic illnesses, including cancer, diabetes, obesity, and cardiovascular diseases has become a growing concern for modern society. Recently, various bioactive compounds (bioactives) are shown to have a diversity of health-beneficial impacts on a wide range of disorders. But the application of these bioactives in food and pharmaceutical formulations is limited due to their poor water solubility and low bioaccessibility/bioavailability. Plant proteins are green alternatives for designing biopolymeric nanoparticles as appropriate nanocarriers thanks to their amphiphilic nature compatible with many bioactives and unique functional properties. Recently, emerging plant proteins (EPPs) are employed as nanocarriers for protection and targeted delivery of bioactives and also improving their stability and shelf-life. EPPs could enhance the solubility, stability, and bioavailability of bioactives by different types of delivery systems. In addition, the use of EPPs in combination with other biopolymers like polysaccharides was found to make a favorable wall material for food bioactives. This review article covers the various sources and importance of EPPs along with different encapsulation techniques of bioactives. Characterization of EPPs for encapsulation is also investigated. Furthermore, the focus is on the application of EPPs as nanocarriers for food bioactives.

Influence mechanism of polysaccharides induced Maillard reaction on plant proteins structure and functional properties: A review

Plant proteins have high nutritional value, a wide range of sources and low cost. However, it is easily affected by the environmental factors of processing and lead the problem of poor functionality. These problems of plant proteins can be improved by the polysaccharides induced Maillard reaction. The interaction between proteins and polysaccharides through Maillard reaction can change the structure of proteins as well as improve the functional properties and biological activity. The products of Maillard reaction, such as reductone intermediates, heterocyclic compounds and melanoidins have certain antioxidant, antibacterial and other biological activities. However, heterocyclic amines, acrylamide, and products generated in the advanced stage of the Maillard reaction also have a negative impact, which may increase cytotoxicity and be associated with chronic diseases. Therefore, it is necessary to effectively control the process of Maillard reaction. This review focuses on the modification of plant proteins by polysaccharide-induced Maillard reaction and the effects of Maillard reaction on protein structure, functional properties and biological activity. It also points out how to accurately reflect the changes of protein structure in Maillard reaction. In addition, it also points out the application ways of plant protein-polysaccharide complexes in the food industry, for example, emulsifiers, delivery carriers of functional substances, and natural antioxidants due to their improved solubility, emulsifying, gelling and antioxidant properties. This review provides theoretical support for controlling Maillard reaction based on protein structure.

Cisplatin conjugation with an exopolysaccharide extracted from Lactobacillus gasseri potentiates its efficacy and attenuates its toxicity

The development of newer cisplatin analogs is constantly being investigated owing to its low solubility, poor pharmacokinetics, and dose-related toxicity. In order to address the limitations of current cisplatin therapy, the present study was undertaken. Cisplatin conjugation with an exopolysaccharide extracted from Lactobacillus gasseri (LG-EPS) showed remarkably enhanced and selective anticancer activity by targeting tumor cells overexpressing glucose transporter 1 (GLUT1). The EPS-cisplatin complex exhibited a 600-fold increase in aqueous solubility with a better pharmacokinetic profile (longer half-life) in comparison to cisplatin. Cell viability assay and western blotting demonstrated a strong correlation between the cytotoxicity profile and GLUT1 expressions in different cell lines. The concentration of DNA-bound platinum was also found to be significantly higher in EPS-cisplatin-treated cells. Quercetin, a competitive inhibitor of GLUTs, was shown to prevent this selective uptake of EPS-cisplatin complex. Surprisingly, EPS-cisplatin complex showed an exceptionally safer profile (4 times the maximum tolerated dose of cisplatin) in the acute toxicity study and was also more efficacious against the xenograft mice model. The study suggests that this green glycoconjugation can be an effective and safer strategy to broaden the therapeutic potential of anti-cancer drugs in general and cisplatin in particular.

Promoting adsorption performance and mechanical strength in composite porous gel film

Starch is widely used to prepare biodegradable films due to its superior biocompatibility, low immunogenicity, and renewability. In this work, a novel K⁺/carrageenan porous-starch/casein gel film with high oil absorption was prepared using modified porous starch. Optimal gel stability and uniformity were obtained when adding 10 mg/mL k-carrageenan and 2 mg/mL K⁺ to 2 mg/mL microgels, with significantly reduced crystallinity and elasticity and increased tensile strength. The concentration of k-carrageenan was the main factor affecting gel strength and the hydrophilic and mechanical properties of the film. In addition, the film-forming solution showed excellent fluidity and spreading typical of non-Newtonian fluids. The film also exhibited a highly porous structure, as visualized by SEM and AFM, in line with a cumulative oil absorption rate of 87.5 % within 20 min, which was significantly higher than that obtained with glutinous rice starch. In conclusion, reinforcement of starch-based microgels as described in this study can maximize the film's adsorption performance and mechanical properties, with promising applications in skin care and beauty products.

Advances in Antitumor Nano-Drug Delivery Systems of 10-Hydroxycamptothecin

10-Hydroxycamptothecin (HCPT) is a natural plant alkaloid from Camptotheca that shows potent antitumor activity by targeting intracellular topoisomerase I. However, factors such as instability of the lactone ring and insolubility in water have limited the clinical application of this drug. In recent years, unprecedented advances in biomedical nanotechnology have facilitated the development of nano drug delivery systems. It has been found that nanomedicine can significantly improve the stability and water solubility of HCPT. NanoMedicines with different diagnostic and therapeutic functions have been developed to significantly improve the anticancer effect of HCPT. In this paper, we collected reports on HCPT nanomedicines against tumors in the past decade. Based on current research advances, we dissected the current status and limitations of HCPT nanomedicines development and looked forward to future research directions.

PLGA-PVA-PEG Single Emulsion Method as a Candidate for Aminolevulinic Acid (5-ALA) Encapsulation: Laboratory Scaling up and Stability Evaluation

One of the most widely used molecules used for photodynamic therapy (PDT) is 5-aminolevulinic acid (5-ALA), a precursor in the synthesis of tetrapyrroles such as chlorophyll and heme. The 5-ALA skin permeation is considerably reduced due to its hydrophilic characteristics, decreasing its local bioavailability and therapeutic effect. For this reason, five different systems containing polymeric particles of poly [D, L–lactic–co–glycolic acid (PLGA)] were developed to encapsulate 5-ALA based on single and double emulsions methodology. All systems were standardized (according to the volume of reagents and mass of pharmaceutical ingredients) and compared in terms of laboratory scaling up, particle formation and stability over time. UV-VIS spectroscopy revealed that particle absorption/adsorption of 5-ALA was dependent on the method of synthesis. Different size distribution was observed by DLS and NTA techniques, revealing that 5-ALA increased the particle size. The contact angle evaluation showed that the system hydrophobicity was dependent on the surfactant and the 5-ALA contribution. The FTIR results indicated that the type of emulsion influenced the particle formation, as well as allowing PEG functionalization and interaction with 5-ALA. According to the ¹H-NMR results, the 5-ALA reduced the T1 values of polyvinyl alcohol (PVA) and PLGA in the double emulsion systems due to the decrease in molecular packing in the hydrophobic region. The results indicated that the system formed by single emulsion containing the combination PVA–PEG presented greater stability with less influence from 5-ALA. This system is a promising candidate to successfully encapsulate 5-ALA and achieve good performance and specificity for in vitro skin cancer treatment.

Impact of weakly charged insoluble karaya gum on zein nanoparticle and mechanism for stabilizing Pickering emulsions

The effect of weakly charged insoluble karaya gum (KG) on zein colloidal nanoparticles (ZKGPs) for stabilizing Pickering emulsions was investigated. Due to weak surface charge, KG could cover the surface of zein particles by hydrogen bonds and weak electrostatic interactions. With the increase in coverage, the zeta potential of ZKGPs changed from positive to negative values close to zero and the average particle size tended to become larger. The closest neutral wettability (89.85°) was achieved when the zein/KG mass ratio was 1:1. The samples prepared with high oil volume fraction (φ = 0.5-0.75) and high particle concentration (1.0-1.3 %, w/v) formed emulsion gels easily and showed higher storage stability. CLSM images also confirmed that ZKGPs could be distributed in the continuous phase to enhance the emulsion network structure. Consequently, weakly charged ZKGPs reduced the emulsification energy barrier and increased the coverage and steric hindrance of particles at the oil/water interface. These findings provide new ideas for the development of stable Pickering emulsions for application in food textural modification as well as encapsulation and delivery of bioactive substances.

Complex coacervation of soy protein isolate-limited enzymatic hydrolysates and sodium alginate: Formation mechanism and its application

The complex coacervation of soybean protein isolate and polysaccharide has been widely applied for preparing biopolymer materials like microcapsule. In this study, hydrolytic soy protein isolate (HSPI) was prepared by mild hydrolysis of soy protein isolate (SPI) with fungal protease 400 (F400). The degree of hydrolysis (DH) for the enzymatic products was controlled at 1%-5%. Emulsification, oxidation resistance, and thermal stability were used to evaluate the performances of HSPI with different DH. The results showed that the HSPI with the hydrolysis degree of 2% had the optimal property. Subsequently, the complex polymer of HSPI/SA was prepared by the coalescence reaction of HSPI and sodium alginate (SA). The turbidity curves manifested the optimal complex coacervation occurred at the ratio of 7:1 (HSPI:SA). Fourier transform infrared spectroscopy (FTIR) presented that the reaction involved electrostatic interactions between -NH₃ ⁺ in HSPI and -COO^- in SA. Isothermal titration calorimetry experiments indicated that the complex coacervation reactions of HSPI and SA arose spontaneously. The microencapsulation by complex coacervation of HSPI and SA was further produced for embedding sweet orange oil. The thermogravimetric analysis (TGA) result revealed that the microencapsulation system of HSPI/SA had a better heat resistance than that using the SPI/SA complex polymer.

Polysaccharide-based nano-delivery systems for encapsulation, delivery, and pH-responsive release of bioactive ingredients

Polysaccharides are natural polymers isolated from plants, microorganisms, algae, and some animals they are composed of aldoses or ketoses linked by glycosidic bonds. Due to the affordability, abundance, safety, and functionality, polysaccharides are widely used in the foods and medicines to construct oral delivery systems for sensitive bioactive ingredients. In this article, the characteristics and applications of nanoscale polysaccharide-based delivery carriers are reviewed, including their ability to encapsulate, protect, and deliver bioactive ingredients. This review discusses the sources, characteristics, and functional properties of common food polysaccharides, including starch, pectin, chitosan, xanthan gum, and alginate. It also highlights the potential advantages of using polysaccharides for the construction of nano-delivery systems, such as nanoparticles, nanogels, nanoemulsions, nanocapsules, and nanofibers. Moreover, the application of delivery systems assembled from polysaccharides is summarized, with a focus on pH-responsive delivery of bioactives. There are some key findings and conclusions: Nanoscale polysaccharide delivery systems provide several advantages, including improved water-dispersibility, flavor masking, stability enhancement, reduced volatility, and controlled release; Polysaccharide nanocarriers can be used to construct pH-responsive delivery vehicles to achieve intestinal-targeted delivery and controlled release of bioactive ingredients; Polysaccharides can be used in combination with other biopolymers to form composite delivery systems with enhanced functional attributes.

Current advances and potential trends of the polysaccharides derived from medicinal mushrooms sanghuang

For thousands of years, sanghuang is distinctive as a general designation for a group of precious and rare Chinese medicinal mushrooms. Numerous investigations have revealed that polysaccharide is one of the important biological active ingredients of sanghuang with various excellent biological activities, including antioxidant, anti-aging, anti-tumor, immunomodulatory, anti-inflammatory, anti-diabetic, hepatoprotective, and anti-microbial functionalities. For the past two decades, preparation, structural characterization, and reliable bioactivities of the polysaccharides from fruiting bodies, cultured mycelia, and fermentation broth of sanghuang have been arousing extensive interest, and particularly, different strains, sources, and isolation protocols might result in obvious discrepancies in structural features and bioactivities. Therefore, this review summarizes the recent reports on preparation strategies, structural features, bioactivities, and structure-activity relationships of sanghuang polysaccharides, which will enrich the knowledge on the values of natural sanghuang polysaccharides and support their further development and utilization as therapeutic agents, vaccines, and functional foods in tonic and clinical treatment.

Immobilization Systems of Antimicrobial Peptide Ib−M1 in Polymeric Nanoparticles Based on Alginate and Chitosan

The development of new strategies to reduce the use of traditional antibiotics has been a topic of global interest due to the resistance generated by multiresistant microorganisms, including Escherichia coli, as etiological agents of various diseases. Antimicrobial peptides are presented as an alternative for the treatment of infectious diseases caused by this type of microorganism. The Ib−M1 peptide meets the requirements to be used as an antimicrobial compound. However, it is necessary to use strategies that generate protection and resist the conditions encountered in a biological system. Therefore, in this study, we synthesized alginate and chitosan nanoparticles (Alg−Chi NPs) using the ionic gelation technique, which allows for the crosslinking of polymeric chains arranged in nanostructures by intermolecular interactions that can be either covalent or non-covalent. Such interactions can be achieved through the use of crosslinking agents that facilitate this binding. This technique allows for immobilization of the Ib−M1 peptide to form an Ib−M1/Alg−Chi bioconjugate. SEM, DLS, and FT-IR were used to determine the structural features of the nanoparticles. We evaluated the biological activity against E. coli ATCC 25922 and Vero mammalian cells, as well as the stability at various temperatures, pH, and proteases, of Ib−M1 and Ib−M1/Alg-Chi. The results showed agglomerates of nanoparticles with average sizes of 150 nm; an MIC of 12.5 µM, which was maintained in the bioconjugate; and cytotoxicity values close to 40%. Stability was maintained against pH and temperature; in proteases, it was only evidenced against pepsin in Ib−M1/Alg-Chi. The results are promising with respect to the use of Ib−M1 and Ib−M1/Alg−Chi as possible antimicrobial agents.

Improvement of the gel properties and flavor adsorption capacity of fish myosin upon yeast β-glucan incorporation

The potential effects of yeast β-glucan (YG) on heat-induced gel properties, microstructure and flavor adsorption capacity of fish myosin at different NaCl concentrations were investigated in this study. The incorporation of YG significantly improved the texture properties, gel strength, water holding capacity (WHC), storage modulus and loss modulus of myosin gels, especially at a high salt level, whereas the whiteness declined. Furthermore, myosin gels containing YG displayed a more compact and ordered three-dimensional network structure, accompanied by the increasing immobilization of water in gels. The binding abilities of gels to selected flavor compounds at high salt content were inferior to those at the low salt content. Regardless of the salt level, YG addition boosted the flavor binding capacity of gels, which might be attributed to the unfolding of the protein conformation by exposing more flavor-binding sites, as well as the porous sponge structure of YG with unique adsorption capacity.

Protein release from nanocellulose and alginate hydrogels: The study of adsorption and desorption kinetics

This work presents a study of the lysozyme release from crosslinked TEMPO nanocellulose (TOCNF) and alginate (ALG) hydrogels in a medium with different ionic strength and temperature. The main objective is to develop a mathematical model for a detailed study of the concurrent action of diffusion mechanism and adsorption/desorption kinetics. Model fit parameters provide important information about the initial (maximum) adsorption rate and its deceleration with increasing ionic strength of the release medium. Similarly, the initial (minimum) desorption rate and its acceleration with increasing salt concentration can be determined. The model leads us to the conclusion that the initial adsorption rate is higher in the case of TOCNF, but due to fewer electrostatic interactions and morphology as well as topography of the surface, it decreases to a negligible value much faster than in the case of ALG, where the diffusion process becomes dominant.

The non-covalent interactions between whey protein and various food functional ingredients

In daily diet, Whey protein (WP) is often coexisted with various Food functional ingredients (FFI) such as proteins, polyphenols, polysaccharides and vitamins, which inevitably affect or interact with each other. Generally speaking, they may be interact by two different mechanisms: non-covalent and covalent interactions, of which the former is more common. We reviewed the non-covalent interactions between WP and various FFI, explained the effect of each WP-FFI interaction, and provided possible applications of WP-FFI complex in the food industry. The biological activity, physical and chemical stability of FFI, and the structure and functionalities of WP were enhanced through the non-covalent interactions. The development of non-covalent interactions between WP and FFI provides opportunities for the design of new ingredients and biopolymer complex, which can be applied in different fields. Future research will further focus on the influence of external or environmental factors in the food system and processing methods on interactions.

Interaction between Gelatin and Mulberry Leaf Polysaccharides in Miscible System: Physicochemical Characteristics and Rheological Behavior

In this study, the miscible system was formed by mixing gelatin (G) with mulberry leaf polysaccharides (MLPs) continuously extracted with a hot buffer (HBSS), a chelating agent (CHSS), a dilute alkali (DASS), and a concentrated alkali (CASS), and the zeta potential, turbidity, particle size, distribution, and rheological properties of the miscible systems were evaluated. Under acidic conditions, the miscible systems of four polysaccharides and gelatin were in a clear state; under alkaline conditions, G-HBSS and G-CHSS were clarified, and G-DASS and G-CASS changed from clarification to turbidity. The zeta potential changed from positive to negative with the increase in pH. When the pH was at 7, it increased with the increase in polysaccharide concentration but was still negative. The four miscible systems all showed polydispersity. The particle sizes of G-HBSS and G-CHSS decreased with the increase in pH, while the particle sizes of G-DASS and G-CASS were increased. The four miscible systems showed “shear thinning” behavior, and the addition of gelatin reduced the apparent viscosity of the four polysaccharide solutions. G-CHSS was highly stable, and G-CASS was more suitable as a stabilizer in the freezing process.

A comparative study on physicochemical and micellar solubilization performance between monoglucosyl rebaudioside A and rebaudioside A

BACKGROUND

Rebaudioside A (RA) and its monoglucosyl derivative, as like rebaudioside D (RD) are the most popular stevia glycosides but possess poor solubility in water, which limited their application as edible surfactants, the applications as in micellar solubilization and drug delivery. Meanwhile, effect of the monoglucosyl attached to RA moiety remains unclear.

RESULTS

Monoglucosyl rebaudioside A (RAG1) was synthesized via hydrolyzing the transglycosylation product of RA with 95% of RA converted. RAG1 content in raw reaction mixture was as high as 69.5% of total glycosides, and harvested with a content of 88.2% by simple filtration. The RAG1 exhibited an aqueous solubility of 87 folds of RA or 391 folds of RD at 25 °C. The surface activity of RAG1 solution was higher than RA and invincible to RD. The RAG1 micelles promoted aqueous solubility of idebenone (IDE) up to 500 folds higher at 25 °C. The cumulative release rate of IDE encapsulated in RAG1 micelles was 777.5% or 456.7% higher of that of free IDE in simulated gastric/intestinal fluids in 14 h, respectively. The RAG1-IDE remained the same in 98 days at 25 °C.

CONCLUSION

The α-linked glucosyl to RA induced higher hydrophilicity and surface activity than that resulted by β-linked glucosyl, making RAG1 not only dramatically raise the aqueous solubility of RA, but also endow IDE folds higher in bioaccessibility, yet making the capsule stable at storage. The results would provide a new edible delivery nanocarrier for encapsulation of hydrophobic bioactive components. © 2021 Society of Chemical Industry.

Modern Herbal Nanogels: Formulation, Delivery Methods, and Applications

This study examined the most recent advancements in nanogel production and drug delivery. Phytochemistry is a discipline of chemistry that studies herbal compounds. Herbal substances have aided in the development of innovative remedies for a wide range of illnesses. Several of these compounds are forbidden from being used in medications due to broad medical characteristics and pharmacokinetics. A variety of new technical approaches have been investigated to ameliorate herbal discoveries in the pharmaceutical sector. The article focuses on the historical data for herb-related nanogels that are used to treat a variety of disorders with great patient compliance, delivery rate, and efficacy. Stimulus-responsive nanogels such as temperature responsive and pH-responsive systems are also discussed. Nanogel formulations, which have been hailed as promising targets for drug delivery systems, have the ability to alter the profile of a drug, genotype, protein, peptide, oligosaccharide, or immunogenic substance, as well as its ability to cross biological barriers, biodistribution, and pharmacokinetics, improving efficacy, safety, and patient cooperation.

Application of Gelatin in Food Packaging: A Review

Owing to the increasing environmental concerns and requirements for high-quality foods, edible films and coatings (based on proteins, polysaccharides, natural phenolic active substances, etc.) are being developed as effective alternatives to traditional plastic packaging. Gelatin is extracted from collagen. It is an ideal material for food packaging due to its versatile advantages such as low price, polymerization, biodegradability, good antibacterial and antioxidant properties, etc. However, gelatin film exists poor waterproof and mechanical properties, which limit its developments and applications in food packaging. Previous studies show that pure gelatin can be modified by adding active ingredients and incorporating them with bio-polymers to improve its mechanical properties, aiming to achieve the desirable effect of preservation. This review mainly shows the preparation and molding ways of gelatin-based edible films and the applications of gelatin modified with other biopolymers. Furthermore, this review provides the latest advances in gelatin-based biodegradable packaging and food applications that exhibit outstanding advantages in food preservation.

Nanocarriers for Sustainable Active Packaging: An Overview during and Post COVID-19

Lockdown has been installed due to the fast spread of COVID-19, and several challenges have occurred. Active packaging was considered a sustainable option for mitigating risks to food systems during COVID-19. Biopolymeric-based active packaging incorporating the release of active compounds with antimicrobial and antioxidant activity represents an innovative solution for increasing shelf life and maintaining food quality during transportation from producers to consumers. However, food packaging requires certain physical, chemical, and mechanical performances, which biopolymers such as proteins, polysaccharides, and lipids have not satisfied. In addition, active compounds have low stability and can easily burst when added directly into biopolymeric materials. Due to these drawbacks, encapsulation into lipid-based, polymeric-based, and nanoclay-based nanocarriers has currently captured increased interest. Nanocarriers can protect and control the release of active compounds and can enhance the performance of biopolymeric matrices. The aim of this manuscript is to provide an overview regarding the benefits of released active compound-loaded nanocarriers in developing sustainable biopolymeric-based active packaging with antimicrobial and antioxidant properties. Nanocarriers improve physical, chemical, and mechanical properties of the biopolymeric matrix and increase the bioactivity of released active compounds. Furthermore, challenges during the COVID-19 pandemic and a brief post-COVID-19 scenario were also mentioned.

Exploring the potential of polypeptide–polypeptoide hybrid nanogels for mucosal delivery

By chain extension of polysarcosine with phenylalanine and cystine, nanogels are formed. The nanogels facilitate the transport of dyes across an artificial mucus coated membrane and their release by reductive bond cleavage.

Recent Insights Into the Prognostic and Therapeutic Applications of Lysozymes

Lysozymes are naturally occurring enzymes present in a variety of biological organisms, such as bacteria, fungi, and animal bodily secretions and tissues. It is also the main ingredient of many ethnomedicines. It is well known that lysozymes and lysozyme-like enzymes can be used as anti-bacterial agents by degrading bacterial cell wall peptidoglycan that leads to cell death, and can also inhibit fungi, yeasts, and viruses. In addition to its direct antimicrobial activity, lysozyme is also an important component of the innate immune system in most mammals. Increasing evidence has shown the immune-modulatory effects of lysozymes against infection and inflammation. More recently, studies have revealed the anti-cancer activities of lysozyme in multiple types of tumors, potentially through its immune-modulatory activities. In this review, we summarized the major functions and underlying mechanisms of lysozymes derived from animal and plant sources. We highlighted the therapeutic applications and recent advances of lysozymes in cancers, hypertension, and viral diseases, aiming toseeking alternative therapies for standard medical treatment bypassing side effects. We also evaluated the role of lysozyme as a promising cancer marker for prognosis to indicate the outcomes recurrence for patients.

Load phycocyanin to achieve in vivo imaging of casein-porous starch microgels induced by ultra-high-pressure homogenization

Traditional bioactive substances are often limited in practical application due to their poor stability and low solubility. Therefore, it is imperative to develop biocompatible high loading microgel carriers. In this study, a novel type of casein-porous starch microgel was prepared under ultra-high-pressure homogenization, by using porous starch with the honeycomb three-dimensional network porous structure. Molecular interaction force analysis and thermodynamic analysis showed that electrostatic interaction played a major role in the formation of microgels. Circular dichroism and Fourier transform infrared spectroscopy showed that homogenization and pH were the main factors, which affected the formation and structural stability of microgels. Compared with casein-glutinous rice starch microgels, the encapsulation efficiency and loading capacity of phycocyanin in casein-porous starch microgels were increased by 77.27% and 135.10%, respectively. Thus, casein-porous starch microgels could not only achieve a sustained release effect, but also effectively transport phycocyanin to the gastrointestinal tract of zebrafish, while achieving good fluorescence imaging in vivo. Ultimately, the prepared casein-porous starch microgels could enrich the nanocarriers material, and contribute to the research of safe and effective fluorescent imaging materials.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021)

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.