Effect of ionic strength on the structural properties and emulsion characteristics of myofibrillar proteins from hairtail (Trichiurus haumela)

Integrated ultra-high pressure and salt addition to improve the in vitro digestibility of myofibrillar proteins from scallop mantle (Patinopecten yessoensis)

Myofibrillar protein (MP) is susceptible to the effect of ionic strength and ultra-high pressure (UHP) treatment, respectively. However, the impact of UHP combined with ionic strength on the structure and in vitro digestibility of MP from scallop mantle (Patinopecten yessoensis) is not yet clear. Therefore, it is particularly important to analyze the structural properties and enhance the in vitro digestibility of MP by NaCl and UHP treatment. The findings demonstrated that as ionic strength increased, the α-helix and β-sheet gradually transformed into β-turn and random coil. The decrease of endogenous fluorescence intensity indicated the formation of a more stable tertiary structure. Additionally, the exposure of internal sulfhydryl groups increased the amount of total sulfhydryl content, and reactive sulfhydryl groups gradually transformed into disulfide bonds. Moreover, it reduces aggregation through increased solubility, decreased turbidity, particle sizes, and a relatively dense and uniform microstructure. When MP from the scallop mantle was treated with 0.5 mol/L ionic strength and 200 MPa UHP treatment, it had the highest solubility (90.75 ± 0.13%) and the lowest turbidity (0.41 ± 0.03). The scallop mantle MP with NaCl of 0.3 mol/L and UHP treatment had optimal in vitro digestibility (95.14 ± 2.01%). The findings may offer a fresh perspectives for developing functional foods for patients with dyspepsia and a theoretical foundation for the comprehensive utilization of scallop mantle by-products with low concentrations of NaCl.

Low-frequency alternating magnetic field and CaCl2 influence the physicochemical, conformational and gel characteristics of low-salt myofibrillar protein

In this study, the improvement mechanism of low-frequency alternating magnetic field (LF-AMF, 5 mT, 3 h) combined with calcium chloride (CaCl2, 0-100 mM) on the gel characteristics of low-salt myofibrillar protein (MP) was investigated. LF-AMF combined with 80 mM CaCl2 treatment increased solubility (32.71%), surface hydrophobicity (40.86 μg), active sulfhydryl content (22.57%), water-holding capacity (7.15%). Besides, the combined treatment decreased turbidity, particle size and intrinsic fluorescence strength of MP. Fourier transform infrared spectroscopy (FT-IR) results indicated that the combined treatment altered the secondary structure of MP by increasing β-sheet and β-turn, and reducing α-helix and random coil. The combined treatment also induced a high G' value and shortened T2 relaxation time for forming a homogeneous and compact gel structure. These results revealed that LF-AMF combined CaCl2 treatment could as a potential approach for modifying the gel characteristics of low-salt MP.

Effect of ultrasound treatment on porcine myofibrillar protein binding furan flavor compounds at different salt concentrations

The effects of ultrasound (500 W) on the interaction of porcine myofibrillar protein (MP) with furan flavor compounds at different salt concentrations (0.6 %, 1.2 % and 2.4 %) were investigated. With the increase of salt concentration, the particle size of MP decreased, and the surface hydrophobicity and active sulfhydryl content increased due to the unfolding and depolymerization of MP. At the same time, ultrasound promoted the exposure of hydrophobic binding sites and hydrogen bonding sites of MP in different salt concentration systems, thus improving the binding ability of MP with furan compounds by 2 % to 22 %, among which MP had the strongest binding capacity of 2-pentylfuran. In conclusion, ultrasound could effectively promote the unfolding of the secondary structure of MP, which was beneficial to the combination of MP and furan flavor compounds under different salt concentrations.

The construction of Moringa oleifera seed protein emulsion: in vitro digestibility and delivery of β-carotene

BACKGROUND

β-Carotene (BC) is difficult to apply effectively in the food industry due to its low solubility and bioavailability. This work aimed to fabricate Moringa oleifera seed protein (MOSP) stabilized emulsions as delivery vehicles for BC and investigate the effect of aqueous phase conditions including pH and ionic strength on this system.

RESULTS

All MOSP samples were positively charged and the particle size of MOSP increased with the increase of pH. At pH 5.0 and 0.2 mol L-1 sodium chloride (NaCl), the MOSP emulsion demonstrated the highest stability coefficient and minimal creaming index, while exhibiting a lower release rate in vitro digestion. The rheological behavior of all MOSP emulsions within the frequency range of 0.1-10 Hz was dominated by viscoelasticity, forming an elastic network structure through dispersed droplets. Additionally, the MOSP emulsion loaded with BC prepared at pH 5.0 and 0.2 mol L-1 NaCl displayed enhanced ultraviolet light stability (52.31 ± 0.03% and 51.86 ± 0.05%) as well as thermal stability (72.39 ± 8.67% and 86.78 ± 10.69%). Furthermore, the BC in the emulsion at pH 7.0 exhibited favorable stability (65.14 ± 0.02%) and optimal bioaccessibility (40.30 ± 0.04%) in vitro digestion.

CONCLUSION

The results provided reference data for utilizing MOSP as a novel emulsifier and broadening the application of BC in the food industry. © 2024 Society of Chemical Industry.

Effect of different salts on the foaming properties of model protein systems for infant formula

This multiscale study aimed to evaluate the effects of different salts (NaCl, KCl, MgCl2, and CaCl2) on the foaming capacity (FC) and foam stability (FS) of model protein systems (MPS) for infant formula via changes in surface and structural properties. Our results showed that the FC and FS of MPS were increased with the addition of NaCl, KCl, and MgCl2, whereas CaCl2 significantly decreased FC (79.5 ± 10.6%) and increased FS (93.2 ± 2.2%). The surface hydrophobicity was increased and the net charge and surface tension were reduced after the addition of salts. Structural analysis revealed the reduction of intensity of intrinsic fluorescence spectroscopy and UV absorption, and the conversion of α-helix into β-strand, which was attributed to protein agglomeration. Additionally, MgCl2 and CaCl2 exhibited larger size and lower net charge compared with NaCl and KCl, indicating a greater ability to bind to charged amino acids and form larger aggregates. Correlation analysis indicated that FC was positively related to adsorbed protein and β-turn and negatively correlated with particle size. In addition, FS showed a positive correlation with β-strand, apparent viscosity, and zeta potential. However, it exhibited a negative correlation with β-turn, α-helix, and sulfhydryl content. These results provide a theoretical reference for further understanding of the effect of salts on the foaming properties of MPS.

Characteristics of hairtail surimi gels treated with myofibrillar protein-stabilized Pickering emulsions

BACKGROUND

Hairtail (Trichiurus haumela) surimi exhibits poor gelation properties and a dark gray appearance, which hinder its utilization in high-quality surimi gel products. The effect of Pickering emulsions stabilized by myofibrillar proteins (MPE) on the gel properties of hairtail surimi has been unclear. In particular, the impact of MPE under NaCl and KCl treatments on the quality of hairtail surimi gels requires further elucidation.

RESULTS

Pickering emulsions stabilized by myofibrillar proteins and treated with NaCl or KCl (Na-MPE, K-MPE) were added to hairtail surimi in amounts of 10-70 g kg-1. The addition of 50 g kg-1 Na-MPE and K-MPE improved the gel strength, textural properties, whiteness, and water-holding capacity (WHC) of hairtail surimi. The relative content of β-turn and β-sheet in the surimi gels increased and the relative content of random coils and α-helix decreased with the addition of oil. The addition of Na-MPE and K-MPE did not affect the secondary structure of surimi gels but stimulated the gelation of hairtail surimi gels. Hairtail surimi containing K-MPE demonstrated similar performance in terms of hardness, microstructure, and WHC compared with the addition of Na-MPE.

CONCLUSION

The quality of hairtail surimi gels can be improved by the addition of Na-MPE or K-MPE. The K-MPE proved to be an effective option for enhancing the properties of hairtail surimi gels at 50 g kg-1 to replace Na-MPE. © 2024 Society of Chemical Industry.

Insights into the emulsifying effect and oxidation stability of myofibrillar protein-diacylglycerol emulsions containing catechin at different ionic strengths

The purpose of this study was to investigate the effects of different ionic strengths on the emulsifying and oxidation stabilities of myofibrillar protein-diacylglycerol emulsions containing catechin (MP-DAG-C), in which lard, unpurified glycerolytic lard (UGL), and purified glycerolytic lard (PGL) were used as oil phases in this study, respectively. Results revealed that emulsifying ability was significantly improved by UGL and PGL (P < 0.05). Meanwhile, the emulsifying activity and stability, absolute ξ-potential value, shear viscosity, and dynamic rheological characteristic of emulsions increased with the increase of ionic strength (P < 0.05) remarkablely, which reached the maximum value at 0.6-M sodium chloride (NaCl). The droplets of emulsions at 0.6-M ionic strength were smallest and distributed most uniformly compared to other NaCl conditions. The formation of thiobarbituric acid substances and carbonyls increased, and the total sulfydryl contents decreased as the extension of storage days (P < 0.05). However, the oxidation stability of MP-DAG-C emulsions was insignificantly decreased by ionic strengths (P > 0.05). The above results showed that MP-DAG-C emulsions could keep excellent emulsifying effects and oxidation stability under high ionic strengths. This study provides data support for the application of MP-DAG-C emulsions in emulsified meat products, which is benefit for promoting the development of high-quality emulsified meat products.

Effect of NaCl concentration on the formation of high internal phase emulsion based on whey protein isolate microgel particles

At present, the effect of structural modification of microgel particles on high internal phase emulsions (HIPEs) is less studied. In this study, the structural modification effect of NaCl on whey protein isolate microgels (WPIMPs) was comprehensively characterized and applied to the construction of HIPEs. WPIMPs were prepared with NaCl (0-150 mM) and the structural changes were analyzed by measuring the particle size, Zeta-potential, and endogenous fluorescence spectra. The results showed that inducing WPIMPs by NaCl enhanced the surface hydrophobicity, decreased the Zeta potential, and elevated the degree of cross-linking. The interfacial behavior of WPIMPs was characterized by measuring interfacial tensions and adsorbed layer properties. The results showed that NaCl induction decreased the interfacial tension, increased the thickness of the adsorbed layer, and improved the viscoelasticity. The HIPEs were analyzed for micromorphology and particle sizes. The results indicated that NaCl-induced WPIMPs favored the formation of HIPEs with small particle sizes and provided HIPEs with superior environmental stability. This study provides a new idea for the structural modification of microgels and a new theoretical basis for the construction conditions of HIPE.

Effects and mechanisms of different κ-carrageenan incorporation forms and ionic strength on the physicochemical and gelling properties of myofibrillar protein

The present work was aimed to investigate the effects of incorporating κ-carrageenan into myofibrillar protein (MP) as a dry powder (CP) or water suspension (CW) and the ionic strength (0.3 or 0.6 M sodium chloride (NaCl)) on MP physicochemical and gelling properties. The results indicated that incorporation of either CP or CW significantly increased turbidity, surface hydrophobicity, particle size and rheological behaviour of MP. In contrast, the protein solubility and fluorescence intensity of MP decreased when added with each form of κ-carrageenan (P < 0.05). These observed effects improved MP's gelling properties and produced a more compact and homogenous gel network after heating treatment. Moreover, the addition of CW rendered higher gel strength, water holding capacity and intermolecular interactions, such as ionic, hydrogen and disulphide bonds and hydrophobic interactions in MP gel compared with those added with CP, especially for 0.3 M NaCl (P < 0.05). Furthermore, addition of CW significantly decreased the α-helix content of MP gels (P < 0.05), which mainly contributing to the transformation from a random structure to an organised configuration. In addition, a higher NaCl concentration (0.6 M) enhanced the gelling properties of MP gels compared with 0.3 M NaCl concentration in the presence of each form of κ-carrageenan. Therefore, our present study indicated that incorporation form of κ-carrageenan and ionic strength have distinctive effects on regulating physicochemical characteristics and improves gelling properties of MP.

Pickering emulsions stabilized by ternary complexes involving curcumin-modified zein and polysaccharides with different charge amounts for encapsulating β-carotene

In this research, zein was modified with curcumin to obtain covalent and non-covalent complexes. They were further covered with polysaccharides (gum arabic or gum karaya) possessing different surface charge amounts to obtain ternary nanoparticles for preparing novel antioxidant Pickering emulsions. The addition of curcumin to the zein-polysaccharide system significantly retarded the UV degradation of the encapsulated β-carotene (maximum retention ∼ 97%) and effectively inhibited the lipid oxidation of the emulsions. In vitro gastrointestinal digestion assays showed that gum karaya significantly delayed the release of free fatty acids, thereby improving the bioaccessibility of β-carotene (the highest bioavailability ∼ 38%). By comparing the performance of the complex particles, the weakly charged polysaccharides were superior to the highly charged ones, while zein-curcumin covalent binding was superior to non-covalent binding in the above experiments. This study provides innovative perspectives on the use of novel Pickering emulsions to provide ideal protection and bioavailability of lipophilic nutraceuticals.

Structural properties and emulsification of myofibrillar proteins from hairtail (Trichiurus haumela) at different salt ions

The structural properties and emulsification of myofibrillar proteins (MPs) are susceptibly affected by salt ions. The effect of different salt ions on the structural properties and emulsification of MPs from hairtail (Trichiurus haumela) remains unclear. Hairtail MPs were analyzed under different ion treatments of Na+, K+, Ca2+ and Mg2+. MPs at K+ and Na+ treatment showed a similar trend on salt effect due to the unfolding of proteins under salt ions. However, the excessive electrostatic effect of divalent ions could enhance protein aggregation, especially at Ca2+ and Mg2+. The β-sheet of MPs at different salt ions interconverted with α-helix and random coil at ionic strengths from 0.1 mol/L to 1.0 mol/L. The surface hydrophobicity and active sulfhydryl content of MPs increased with the improvement of ionic strengths at 0-0.8 mol/L. Under Ca2+ and Mg2+ treatments, the turbidity of MPs was low compared to that under the treatment of Na+ and K+. Additionally, the emulsification of hairtail MPs treated with different ions was improved at an ionic strength of 0.6 mol/L. This study can contribute to using salts in constructing fish protein-based emulsions for manufacturing emulsified surimi products and promoting the development and utilization of hairtail proteins.

Ionic strength-mediated protein and flavor studies on thermally processed hairtail pieces

This study aimed to investigate the impact of different ionic strengths on the texture, protein, and flavor of thermally processed hairtail pieces. Incorporating salt ions into the heat treatment process had a positive impact on the quality of the cooked hairtail pieces. The pieces treated with 2 M NaCl showed superior texture and sensory scores. The ionic strength had a significant positive correlation with the chewiness and cohesion of cooked hairtail (p < 0.01). Furthermore, the myofibrillar protein content and total sulfhydryl content increased significantly. Circular dichroism spectra analysis revealed a transition in the protein structure from a β-sheet structure to an α-helical structure as the ionic strength decreased. The ionic strength had a significant impact on the interaction between protein and flavor compounds. Specifically, it impacted the expression of certain volatile components (p < 0.05). Our study suggests that selecting the appropriate cooking method is crucial for both healthiness and sensory quality of processed hairtail products, and ionic strength mediation is superior in both aspects.

Insight into Ionic Strength-Induced Solubilization of Myofibrillar Proteins from Silver Carp (Hypophthalmichthys molitrix): Structural Changes and 4D Label-Free Proteomics Analysis

In this study, changes in the physical, structural, and assembly characteristics of silver carp myofibrillar proteins (MPs) at different ionic strength (I) values were investigated. Moreover, the differential proteomic profile of soluble MPs was analyzed using 4D proteomics based on timsTOF Pro mass spectrometry. Solubility of MPs significantly increased at high I (>0.3), and the increase in I enhanced the apparent viscosity, fluorescence intensity, surface hydrophobicity, and α-helix content of MPs solution. Particle size and sodium dodecyl sulfate-polyacrylamide gel electrophoresis patterns also supported the solubility profiles. Transmission electron microscopy and atomic force microscopy observations revealed the morphological assembly and disassembly of MPs under different I conditions. Finally, proteomic analysis revealed the evolution law of salt-induced solubilization of MPs and the critical molecular characteristics in different I environments. The number of differentially abundant proteins (DAPs) decreased with the increase of I, and most DAPs related to the muscle filament sliding, contraction and assembly, actinin binding, and actin filament binding. The soluble abundance of myosin and some structural proteins was dependent on I, and structural proteins in the Z-disk and M-band might contribute to the solubilization of myosin. Our findings provide insightful information about the impact of common I on the solubility pattern of MPs from freshwater fish.

Effect of theaflavins on the quality of large yellow croaker (Larimichthys crocea) during refrigerated storage

BACKGROUND

Large yellow croaker (Larimichthys crocea) is an economical marine fish consumed in China. Theaflavins have antibacterial and antioxidant properties. However, there is a lack of research into their application in large yellow croakers during refrigerated storage. This study investigated the effect of theaflavins on the quality of large yellow croaker (Larimichthys crocea) during 12 days of storage at 4 °C.

RESULTS

The results showed that theaflavin treatment was able to inhibit microbial growth and reduce the production of total volatile basic nitrogen (TVB-N). Meanwhile, theaflavins were beneficial in reducing the unfolding of myofibrillar proteins, decreasing the degree of protein aggregation, and improving the stability of protein structure. The degree of protein oxidation was lower in a theaflavin-treated group compared with an untreated group. Theaflavin treatment effectively inhibited increases in acid value (AV), peroxide value (PV), and malonaldehyde (MDA) content. The effect of theaflavin was positively correlated with an increase in concentration under refrigeration conditions. This study therefore suggests that the use of theaflavins is a viable method for extending the period for which refrigerated large yellow croaker can be preserved.

CONCLUSIONS

Adding theaflavins to large yellow croaker can be an effective method for preserving quality during refrigerated storage. © 2023 Society of Chemical Industry.

Characteristics and potential application of myofibrillar protein from golden threadfin bream (Nemipterus virgatus) complexed with chitosan

The strategies to broaden the applications of proteins involve their modification with polysaccharides. However, the characteristics and application of myofibrillar proteins (MPs) from golden threadfin bream (Nemipterus virgatus) complexed with chitosan (CS) are still unclear. Therefore, the characteristics of MPs complexed with CS and their application were investigated at different MP/CS ratios (100:0-80:20 (w/w)). The turbidity of MP/CS complexes was small at the MP/CS ratio of 95:5 (w/w). Besides, CS addition induced changes in MP structure to make it hydrophilic. Secondary structure analysis showed that α-helix and β-turn interconverted with β-sheet and random coil after the addition of CS. Additionally, the thermal stability of MP/CS mixtures enhanced after the addition of CS and the MP/CS mixtures at the ratio of 95:5 (w/w) had a relatively compact structure. High internal phase emulsions (HIPEs) prepared at the MP/CS ratio of 95:5 (w/w) were relatively stable compared to those at the other ratios. Consequently, MP/CS mixtures at suitable ratios possess the potential ability to prepare HIPEs. These results exhibit that MP/CS mixtures may be applied for constructing food-graded emulsion delivery systems with a high internal phase in the food industry.

Insights into the trace Sr2+ impact on the gel properties and spatial structure of mutton myofibrillar proteins

Myofibrillar proteins (MPs) and the quality of meat strongly depend on the properties of MP gels, which in turn depend on several parameters that include the thermal history and the concentration of metal ions. Strontium element (Sr) widely exists in mineral water and is found as strontium ions (Sr²⁺), which is an essential trace element for humans. This study investigated the effects of trace Sr²⁺ on the structure-function relationship of mutton MPs, as well as their gels with water. Trace concentrations of Sr²⁺ were found to significantly alter the conformation of the MPs. An increase in Sr²⁺ concentration was associated with a reduction in the tightness and strength of the gel and a significant increase in its water-holding capacity As compared to the untreated control sample, the solubility, particle size, and the magnitude of the Zeta potential of the gels increased by 13.03 %, 12.62 %, and 19.73 %, respectively, whereas the water retention capacity and the gel strength increased by 23.13 % and 21.90 %, at a Sr²⁺ concentration of 5.0 mg/L. Molecular docking predicted an increase in ionic bonds and disulfide bonds because Sr²⁺ had a strong interaction with hydrophilic amino acids and acidic amino acids. The analysis of molecular forces further verified the significant facilitation of interactions between MP molecules with the induction of Sr²⁺. As compare to the untreated control group, the ionic and disulfide bonds increased by 141.17 % and 66.94 %, when treated with 5.0 mg/L Sr²⁺. These changes were likely due to the enhancement of protein-protein interactions caused by Sr²⁺, which could induce MP molecules to properly unfold and aggregate in gel formation. The results could provide a basis for improving the texture and the quality of meat and meat products.

Effects of hydrodynamic cavitation on physicochemical structure and emulsifying properties of tilapia (Oreochromis niloticus) myofibrillar protein

The purpose of this research was to explore the different hydrodynamic cavitation (HC) times (0, 5, 10, 15, 20 min; power 550 W, pressure 0.14 MPa) on the emulsifying properties of tilapia myofibrillar protein (TMP). Results of pH, particle size, turbidity, solubility, surface hydrophobicity, and reactive sulfhydryl (SH) group indicated that HC changed the structure of TMP, as confirmed by the findings of intrinsic fluorescence and circular dichroism (CD) spectra. Furthermore, HC increased the emulsifying activity index (EAI) significantly (P < 0.05) and changed the emulsifying stability index (ESI), droplet size, and rheology of TMP emulsions. Notably, compared with control group, the 10-min HC significantly decreased particle size and turbidity but increased solubility (P < 0.05), resulting in accelerated diffusion of TMP in the emulsion. The prepared TMP emulsion showed the highest ESI (from 71.28 ± 5.50 to 91.73 ± 5.56 min), the smallest droplet size (from 2,754 ± 110 to 2,138 ± 182 nm) and the best rheological properties, as demonstrated by the microstructure photographs. Overall, by showing the effect of HC in improving the emulsifying properties of TMP, the study demonstrated HC as a potential technique for meat protein processing.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.