Understanding the differences in heat-induced gel properties of twelve legume proteins: A comparative study

Acid-induced pea protein gels pretreated with media milling: Gelling properties and the formation mechanism

This study explored the effect of stirred media mill (SMM) processing on the acid-induced gelling properties of pea protein. Results showed that SMM treatment enhanced the gel strength from 75.06 g to 183.89 g and increased the water holding capacity from 46.64 % to 73.50 %. The minimum gelation concentration achieved for SMM-treated pea protein was 4 %, significantly lower than that of heat-pretreated pea protein (9 %). SMM decreased protein aggregate size from 104 μm to 180 nm. Microscopy analysis revealed that the small aggregates facilitated the formation of uniform gel networks with tight connections. Linear rheology indicated that small protein aggregates resulted in slower gelation rates with a higher G' for the formed gels. The SMM-pretreated protein gel showed strain hardening, shear thinning behaviors, and satisfactory stability to withstand large-amplitude oscillatory shear. Overall, SMM emerges as a promising technology for producing protein gel products with strong mechanical attributes and customizable rheological properties.

Effect of sanxan as novel natural gel modifier on the physicochemical and structural properties of microbial transglutaminase-induced mung bean protein isolate gels

Mung bean protein isolate (MBPI) has attracted much attention as an emerging plant protein. However, its application was limited by the poor gelling characteristics. Thus, the effect of sanxan (SAN) on the gelling behavior of MBPI under microbial transglutaminase (MTG)-induced condition were explored in this study. The results demonstrated that SAN remarkably enhanced the storage modulus, water-holding capacity and mechanical strength. Furthermore, SAN changed the microstructure of MBPI gels to become more dense and ordered. The results of zeta potential indicated the electrostatic interactions existed between SAN and MBPI. The incorporation of SAN altered the secondary structure and molecular conformation of MBPI, and hydrophobic interactions and hydrogen bonding were necessary to maintain the network structure. Additionally, in vitro digestion simulation results exhibited that SAN remarkably improved the capability of MBPI gels to deliver bioactive substances. These findings provided a practical strategy to use natural SAN to improve legume protein gels.

Characteristics of Pickering emulsions stabilized by microgel particles of five different plant proteins and their application

Pickering emulsions stabilized by protein particles are of great interest for use in real food systems. This study was to investigate the properties of microgel particles prepared from different plant proteins, i.e., soybean protein isolate (SPI), pea protein isolate (PPI), mung bean protein isolate (MPI), chia seed protein isolate (CSPI), and chickpea protein isolate (CPI). MPI protein particles had most desirable Pickering emulsion forming ability. The particles of SPI and PPI had similar particle size (316.23 nm and 294.80 nm) and surface hydrophobicity (2238.40 and 2001.13) and emulsion forming ability, while the CSPI and CPI particle stabilized emulsions had the least desirable properties. The MPI and PPI particle stabilized Pickering emulsions produced better quality ice cream than the one produced by SPI particle-stabilized emulsions. These findings provide insight into the properties of Pickering emulsions stabilized by different plant protein particles and help expand their application in emulsions and ice cream.

Colloidal and interfacial properties of spray dried pulse protein-blueberry polyphenol particles in model dispersion systems

The phytochemical composition and physicochemical attributes of polyphenol-enriched protein particle ingredients produced with pulse proteins (e.g. chickpea protein, pea protein, and a chickpea-pea protein blend) and polyphenols recovered from wild blueberry pomace were investigated for colloidal and interfacial properties. Anthocyanins were the major polyphenol fraction (27.74-36.47 mg C3G/g) of these polyphenol-rich particles (44.95-62.08 mg GAE/g). Dispersions of pea protein-polyphenol particles showed a superior phase stability before and after heat treatment compared to the chickpea pea protein-polyphenol system. This observation was independent of the added amount of NaCl in the dispersion. In general, at quasi equilibrium state, pulse protein-polyphenol particles and parental pulse protein ingredients showed similar oil-water interfacial tension. However, pea protein-polyphenol particles demonstrated a reduced diffusion-driven oil-water interfacial adsorption rate constant compared to the parental pea protein ingredient. Overall, the obtained results suggest application potential of pea protein-polyphenol particles as a functional food/beverage ingredient.

A review of inhibition mechanisms of surimi protein hydrolysis by different exogenous additives and their application in improving surimi gel quality

It is well known that aquatic products such as fish and shellfish, when stored for a long period of time under inappropriate conditions, can suffer from muscle softening. This phenomenon is mainly caused by endogenous proteases, which are activated during heating and accelerates the degradation of myofibrillar proteins, directly leading to weaker gels and poorer water retention capacity. This paper reviews the changes in fish proteins during storage after death and the factors affecting protein hydrolysis. A brief overview of the extraction of protease inhibitors, polysaccharides and proteins is given, as well as their mechanism of inhibition of protein hydrolysis in surimi and the current status of their application to improve the properties of surimi.

The formation mechanism and textural properties of a complex gel based on soybean glycinin-chitosan complex coacervates: Effects of pH, heat treatment temperature and centrifugation

The soybean glycinin (11S)-chitosan (CS) complex gels with various textural properties were successfully constructed. The process involved the initial formation of 11S-CS coacervates through electrostatic interactions, followed by a heating treatment to obtain the final complex gels. The impacts of pH, heating temperature, and centrifugation on 11S-CS complex gel properties were investigated. The results indicated that the pore arrangement of the gel formed at pH 7.3 was more tightly and uniformly packed than those formed at pH 6.8 and 7.8. Centrifugation facilitated denser and more ordered gel structures at the three pH values, while increasing the heating temperature exhibited the opposite trend at pH 6.8 and 7.8. These structural differences were also reflected in the rheological and textural properties of the gel. The 11S-CS complex gels exhibited an elasticity-based gel property. The textural properties of gels formed at pH 6.8 were stronger compared to those formed at pH 7.3 and 7.8. However, when the 11S-CS coacervates were heated without centrifugation, the resulting gels were weak. This study emphasizes the potential of using protein/polysaccharide associative interactions during gel formation to alter the microstructure of the gel, meeting various production requirements.

Effects of hsian-tsao polysaccharide on myosin gel structure and its binding capacity to flavor compounds

Hsian-tsao polysaccharide (HTP) with preferable biological activities was explored to improve the gel qualities of surimi. This study investigated the effects of HTP (0-1.0 mg/mL) on structural changes, in vitro digestibility, and fishy odor binding capacity of heat-induced myosin gels (30 mg/mL). HTP promoted the unfolding of myosin structure with transitions from α- helixes to β-sheets, accompanied by the enhancement of hydrophobic bonds, hydrogen bonds, and non-disulfide covalent bonds dominated within gel networks. Moreover, HTP facilitated the formation of compact gel structures of myosin with superior elastic properties (G' > G'') and apparent viscosity, but without affecting the final in vitro digestibility. Moreover, the microstructure of gels markedly affected the adsorption rate of flavor compounds, with a lower adsorption rate obtained for myosin-HTP gels with compact gel networks embedded with evenly small cavities. Additionally, HTP affected the flavor-binding capacities of myosin gels by increasing hexanal and heptanal, but reducing nonanal and 1-octen-3-ol, in relation to the combined effects of myosin structural changes and newly formed gel networks. This work provides a new prospect for application of HTP to regulate the adsorption rate and binding capacity of myosin gels to fishy odors, critical for improvement of gel properties in surimi products.

Commercial Egg Replacers in Pound Cake Systems: A Comprehensive Analysis of Market Trends and Application

Replacing eggs without influencing pound cakes' texture, appearance, and taste is challenging. Ovalbumin, the major protein in egg white, contributes to the structures of cakes by providing SH Groups that form a firm gel during baking. However, there is a shift in the consumers' behaviour regarding health, well-being, animal welfare standards, and environmental concerns. To meet upcoming trends and consumer needs, 102 egg replacement products were launched globally to the best of the authors' knowledge, with 20 of them advertised as suitable for baking applications. Ten locally available commercial egg replacers with a range of protein contents were chosen and applied in a pound cake model system to evaluate their functionality by evaluating cake and cake batter quality. Three different categories of egg replacements were chosen: replacers containing no protein (R1-R3), a low amount of protein (1-10 g/100 g; R4-R5), and a high amount of protein (>10 g/100 g; R6-R10). Those were compared to three control cakes containing powdered whole egg, fresh egg, and liquid whole egg. All the analysed egg replacers significantly differed from the control cakes, including low-protein egg replacement R4. Despite R4 achieving the highest specific volume (1.63 ± 0.07 mL/g) and comparable texture values, none of the examined egg replacers compared favourably with the egg control cakes regarding appearance, physical and textural properties, and nutritional value.

Starch multiscale structure and physicochemical property alterations in high-quality indica rice quality and cooked rice texture under different nitrogen panicle fertilizer applications

The starch multiscale structure, physiochemical properties, grain quality and cooked rice texture of high-quality early and late indica were analyzed under nitrogen panicle fertilizer (low panicle fertilizer, LPF; middle panicle fertilizer, MPF; high panicle fertilizer, HPF) treatments and their internal relations were investigated. Compared to the MPF treatment, the starch granules in HPF and LPF had more surface-proteins and irregular voids for high-quality early and late indica rice cultivars, respectively. Nitrogen panicle fertilization application increased amylopectin medium and long chains as well as protein content, resulting in higher relative crystallinity and gelatinization temperatures. Moderate changes in starch multistructures and physicochemical properties such as branching degree, amylopectin medium chain, and pasting viscosities derived from MPF treatment significantly improved processing, appearance qualities and cooked rice texture. Additionally, the decrease in starch branching, gelatinization temperatures, and granule uniformity along with an increase in large granules, breakdown, and △Hgel under MPF treatment were the main reasons for improving rice textural properties.

Thermal Gelation of Proteins from Cajanus cajan Influenced by pH and Ionic Strength

Cajanus cajan [pigeon pea (PP)] is an important legume crop for subsistence agriculture and its seeds are an alternative plant-based protein source. PP protein isolates (PPI) are able to form heat-induced gels that could be used for food applications. The aim of this work was to study the influence of pH (2.1, 3.9, 6.3, and 8.3) and ionic strength (μ) (0.10 and 0.54) on thermal stability and thermal gelation of PPI obtained by alkaline extraction (pH 8.0) and isoelectric precipitation. Thermal stability of PPI changed with pH variation at low ionic strength (μ = 0.10), decreasing this dependence with the increase of ionic strength (μ = 0.54). At μ = 0.10, gelation capacity of PPI was lower at pH 2.1 and pH 3.9. These gels presented a coarse network, which entails low WHC. At pH 6.3 and pH 8.3, gels showed a solid-like character with a compact and homogeneous matrix, with better WHC. At μ = 0.54, gel formation was favoured at pH 2.1 and pH 3.9. G'20/G'95 ratio values and differential solubility results suggest that hydrogen bonds and electrostatic interactions could play an important role in gel formation at pH 6.3 and pH 8.3.