Simultaneous colorimetric detection of metallic salts contained in low explosives residue using a microfluidic paper-based analytical device (µPAD)

Microfluidics in environmental analysis: advancements, challenges, and future prospects for rapid and efficient monitoring

Microfluidic devices have emerged as advantageous tools for detecting environmental contaminants due to their portability, ease of use, cost-effectiveness, and rapid response capabilities. These devices have wide-ranging applications in environmental monitoring of air, water, and soil matrices, and have also been applied to agricultural monitoring. Although several previous reviews have explored microfluidic devices' utility, this paper presents an up-to-date account of the latest advancements in this field for environmental monitoring, looking back at the past five years. In this review, we discuss devices for prominent contaminants such as heavy metals, pesticides, nutrients, microorganisms, per- and polyfluoroalkyl substances (PFAS), etc. We cover numerous detection methods (electrochemical, colorimetric, fluorescent, etc.) and critically assess the current state of microfluidic devices for environmental monitoring, highlighting both their successes and limitations. Moreover, we propose potential strategies to mitigate these limitations and offer valuable insights into future research and development directions.

Technological Advancement and Trend in Selective Bioanalytical Sample Extraction through State of the Art 3-D Printing Techniques Aiming 'Sorbent Customization as per need'

The inherent complexity of biological matrices and presence of several interfering substances in biological samples make them unsuitable for direct analysis. An effective sample preparation technique assists in analyte enrichment, improving selectivity and sensitivity of bioanalytical method. Because of several key benefits of employing 3D printed sorbent in sample extraction, it has recently gained popularity across a variety of industries. Applications for 3D printing in the field of bioanalytical research have grown recently, particularly in the areas of miniaturization, (bio)sensing, sample preparation, and separation sciences. Due to the high expense of the solid phase microextraction cartridge, researcher approaches in-lab production of sorbent material for the extraction of analyte from biological samples. Owing to its distinct advantages such as low costs, automation capabilities, capacity to produce products in a variety of shapes, and reduction of tedious steps of sample preparation, 3D printed sorbents are gaining increased attention in the field of bioanalysis. It is also reported to offer high selectivity and assist in achieving a much lower limit of detection. In this review, we have discussed current advancements in different types of 3D printed sorbents, production methods, and their applications in the field of bioanalytical sample preparation.

Application of microfluidic technologies in forensic analysis

The application of microfluidic technology in forensic medicine has steadily expanded over the last two decades due to the favorable features of low cost, rapidity, high throughput, user-friendliness, contamination-free, and minimum sample and reagent consumption. In this context, bibliometric methods were adopted to visualize the literature information contained in the Science Citation Index Expanded from 1989 to 2022, focusing on the co-occurrence analysis of forensic and microfluidic topics. A deep interpretation of the literature was conducted based on co-occurrence results, in which microfluidic technologies and their applications in forensic medicine, particularly forensic genetics, were elaborated. The purpose of this review is to provide an impartial evaluation of the utilization of microfluidic technology in forensic medicine. Additionally, the challenges and future trends of implementing microfluidic technology in forensic genetics are also addressed.

Use of Lateral Flow Assays in Forensics

Already for some decades lateral flow assays (LFAs) are 'common use' devices in our daily life. Also, for forensic use LFAs are developed, such as for the analysis of illicit drugs and DNA, but also for the detection of explosives and body fluid identification. Despite their advantages, including ease-of-use, LFAs are not yet frequently applied at a crime scene. This review describes (academic) developments of LFAs for forensic applications, focusing on biological and chemical applications, whereby the main advantages and disadvantages of LFAs for the different forensic applications are summarized. Additionally, a critical review is provided, discussing why LFAs are not frequently applied within the forensic field and highlighting the steps that are needed to bring LFAs to the forensic market.

On the Application of Microfluidic-Based Technologies in Forensics: A Review

Microfluidic technology is a powerful tool to enable the rapid, accurate, and on-site analysis of forensically relevant evidence on a crime scene. This review paper provides a summary on the application of this technology in various forensic investigation fields spanning from forensic serology and human identification to discriminating and analyzing diverse classes of drugs and explosives. Each aspect is further explained by providing a short summary on general forensic workflow and investigations for body fluid identification as well as through the analysis of drugs and explosives. Microfluidic technology, including fabrication methodologies, materials, and working modules, are touched upon. Finally, the current shortcomings on the implementation of the microfluidic technology in the forensic field are discussed along with the future perspectives.

A card instead of a lab: A ligand embedded in a bio-composite of starch/gelatin intelligent film for milk quality test followed by colorimetric analysis

Milk adulteration analysis at different stages of the production chain, which profiteers widely use to mask milk quality parameters, is problematic. We prepared selective intelligent thin bio-films and a dedicated app to test milk adulteration in an out-of-lab setting. In this regard, each reagent is immobilized on a piece of starch/gelatin film as color-changeable polymeric support, which is then pasted onto a transparent test card. Incorporating starch and gelatin as the backbone of these composite films can significantly improve the mechanical properties, color, and potential applications in real-time monitoring. After 5 min floating of the card on the surface of the milk, our developed software as a Progressive Web Application can be used to locate and read the QR codes of the samples to estimate qualitative and quantitative information about the presence of some preservatives. These preservatives ranged from 0.1 to 200.0 mg/L, 1.0-100.0 mg/L, 0.001-0.05 mol/L in 10 mL of milk with the LODs of 0.1, 1.0 mg/L, and 0.001 mmol/L, for H₂O₂, Cr(VI), and salicylic acid, respectively. The pH monitoring film also indicates the freshness/spoilage of the milk. The portability, ease of use, and low cost of testing coupled with the app, make it an attractive alternative to lab-based analysis.

Highly selective simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in water samples using microfluidic paper-based analytical devices

A new paper-based analytical device design was fabricated by a wax printing method for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii). Colorimetry was used to quantify these heavy metal ions using bathocuproine (Bc), dimethylglyoxime (DMG), dithizone (DTZ), and 4-(2-pyridylazo) resorcinol (PAR) as complexing agents. The affinity of complexing agents to heavy metal ions is dependent on the formation constant (Kf). To enhance the selectivity for heavy metal ion determination, the new device was designed with two pretreatment zones, where masking agents remove the interfering ions. It was found that two pretreatment zones worked better than a single pretreatment zone at removing interferences. The reaction time, sample and complexing agent volumes, and complexing agent concentrations were optimized. The analytical results were achieved with the lowest detectable concentrations of 0.32, 0.59, 5.87, 0.20, and 0.11 mg L-1 for Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii), respectively. The linear ranges were found to be 0.32-63.55 mg L-1 (Cu(ii)), 0.59-4.71 mg L-1 (Co(ii)), 5.87-352.16 mg L-1 (Ni(ii)), 0.20-12.04 mg L-1 (Hg(ii)), and 0.11-0.55 mg L-1 (Mn(ii)). The lowest detectable concentration and linearity for the five metal ions allow the application of this device for the determination of heavy metal ions in various water samples. The sensor showed high selectivity and efficiency for simultaneous determination of Cu(ii), Co(ii), Ni(ii), Hg(ii), and Mn(ii) in drinking, tap, and pond water samples on a single device and detection with the naked eye. The results illustrated that the proposed sensor showed good accuracy and precision agreement with the standard ICP-OES method.

Novel approaches for colorimetric measurements in analytical chemistry - A review

Colorimetric techniques have been developed and used in routine analyses for over a century and apparently all their potentialities have been exhaustively explored. However, colorimetric techniques have gained high visibility in the last two decades mainly because of the development of the miniaturization concept, for example, paper-based analytical devices that mostly employ colorimetric reactions, and by the advances and popularity of image capture instruments. The impressive increase in the use of these devices was followed by the development and enhancement of different modes of color detection to meet the demands of making qualitative, semi-quantitative, and fully quantitative analyses of multiple analytes. Cameras, scanners, and smartphones are now being used for this purpose and have become suitable alternatives for different approaches to colorimetric analysis; this, in addition to advancements in miniaturized devices. On the other hand, recent developments in optoelectronics technologies have launched more powerful, more stable and cheaper light-emitting diodes (LEDs), which once again have become an interesting tool for the design of portable and miniaturized devices based on colored reactions. Here, we present a critical review of recent developments and challenges of colorimetric detection in modern analytical chemistry in the last five years, and present thoughts and insights towards future perspectives in the area to improve the use of colorimetric detection in different application approaches.

Dual-Modal Assay Kit for the Qualitative and Quantitative Determination of the Total Water Hardness Using a Permanent Marker Fabricated Microfluidic Paper-Based Analytical Device

A dip-and-read microfluidic paper-based analytical device (µPAD) was developed for the qualitative and quantitative detection of the total hardness of water. To create well-defined hydrophobic barriers on filter paper, a regular office printer and a commercially available permanent marker pen were utilized as a quick and simple technique with easily accessible equipment/materials to fabricate µPAD in new or resource-limited laboratories without sophisticated equipment. After a wettability and barrier efficiency analysis on the permanent marker colors, the blue and green ink markers exhibited favorable hydrophobic properties and were utilized in the fabrication of the developed test devices. The device had five reaction and detection zones modeled after the classification given by the World Health Organization (WHO), so qualitatively it determined whether the water was ‘soft’, ‘moderately hard’, ‘hard’, or ‘very hard’ by changing color from blue to pink in about 3 min. The device was also used to introduce an alternative colorimetric reaction for quantitative analysis of the water hardness without the need for ethylenediaminetetraacetic acid (EDTA) and without compromising the simplicity and low cost of the device. The developed µPAD showed a calculated limit of detection (LOD) of 0.02 mM, which is at least 80% less than those of commercially available test strips and other reported µPADs, and the results of the real-world samples were consistent with those of the standard titration (with EDTA). In addition, the device exhibited stability for 2 months at room and frigid condition (4 °C) and at varying harsh temperatures from 25 to 100 °C. The results demonstrate that the developed paper-based device can be used for rapid, on-site analysis of water with no interferences and no need for a pipette for sample introduction during testing.

Trace Detection and Chemical Analysis of Homemade Fuel-Oxidizer Mixture Explosives: Emerging Challenges and Perspectives

The chemical analysis of homemade explosives (HMEs) and improvised explosive devices (IEDs) remains challenging for fieldable analytical instrumentation and sensors. Complex explosive fuel-oxidizer mixtures, black and smokeless powders, flash powders, and pyrotechnics often include an array of potential organic and inorganic components that present unique interference and matrix effect difficulties. The widely varying physicochemical properties of these components as well as external environmental interferents and background challenge many sampling and sensing modalities. This review provides perspective on these emerging challenges, critically discusses developments in sampling, sensors, and instrumentation, and showcases advancements for the trace detection of inorganic-based explosives.

Use of an ether-derived 3-hydroxy-4-pyridinone chelator as a new chromogenic reagent in the development of a microfluidic paper-based analytical device for Fe(III) determination in natural waters

This article reports on the development and validation of a disposable microfluidic paper-based analytical device (μPAD) for on-hand, in-situ, and cheap Fe(III) determination in natural waters complying with World Health Organization guidelines. The developed μPAD used 3-hydroxy-4-pyridinone (3,4-HPO) as a colour reagent due to its considerably lower toxicity than traditionally used iron analytical reagents. It was selected among a group of hydrophilic 3,4-HPO chelators containing ether-derived chains in their structure which were prepared using green methods. The relatively high water solubility of these chelators improved the detection limit and applicability as μPAD reagents. Under optimal conditions, the μPAD is characterised by a quantification range between 0.25 and 2.0 mg/L, a detection limit of 55 μg/L and 15 min of analysis time. The signal stability extends up to 4 h and the device is stable for at least one month. The reagent consumption is below 0.2 mg per analysis and the μPAD method was validated by analysis certified reference materials and by comparison with atomic absorption results (RD < 10%). The newly developed μPAD was successfully applied to the determination of iron in river, well and tap waters with no need of any prior sample pre-treatment.

Ready-to-use, functionalized paper test strip used with a smartphone for the simultaneous on-site detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater

The simultaneous detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater samples was performed. In this report, we designed and fabricated functionalized paper test strips featuring detection zones that use 3-aminopropyltriethoxysilane (APTES) for the immobilization of chromogenic substrates to detect free chlorine, hydrogen sulfide and formaldehyde. After multiple chromogenic reactions, red, blue and purple colors were obtained on the detection zones and analyzed using a smartphone. Under optimum conditions, the paper test strips showed 1.7, 1.8 and 1.7 orders of magnitude for free chlorine, hydrogen sulfide and formaldehyde, respectively. This sensitivity is caused by the formation of homogeneous complexes on detection zones resulting from the chromogenic reagents immobilized on the detection zone via APTES. Through this strategy, free chlorine, hydrogen sulfide and formaldehyde analysis was achieved within 5 min with detection limits of 0.08, 0.14 and 0.13 mg L^-1, respectively. The developed paper test strip was able to selective detection of free chlorine, hydrogen sulfide and formaldehyde even in the presence of common interfering agents therefore, the test strip was highly selective. In a further demonstration, the developed functionalized paper test strip was successfully used for simultaneous detection of free chlorine, hydrogen sulfide and formaldehyde in wastewater in the field and exhibited with high precision and accuracy in detecting free chlorine, hydrogen sulfide and formaldehyde in wastewater samples. Compared to other methods, this assay was advantageous in terms of its low detection limit, time savings, good stability and highly portable format, which facilitates rapid on-site environmental monitoring with a smartphone.

Recent Advances in Microfluidic Paper-Based Analytical Devices toward High-Throughput Screening

Microfluidic paper-based analytical devices (µPADs) have become promising tools offering various analytical applications for chemical and biological assays at the point-of-care (POC). Compared to traditional microfluidic devices, µPADs offer notable advantages; they are cost-effective, easily fabricated, disposable, and portable. Because of our better understanding and advanced engineering of µPADs, multistep assays, high detection sensitivity, and rapid result readout have become possible, and recently developed µPADs have gained extensive interest in parallel analyses to detect biomarkers of interest. In this review, we focus on recent developments in order to achieve µPADs with high-throughput capability. We discuss existing fabrication techniques and designs, and we introduce and discuss current detection methods and their applications to multiplexed detection assays in relation to clinical diagnosis, drug analysis and screening, environmental monitoring, and food and beverage quality control. A summary with future perspectives for µPADs is also presented.

Interpol review of detection and characterization of explosives and explosives residues 2016-2019

This review paper covers the forensic-relevant literature for the analysis and detection of explosives and explosives residues from 2016-2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/Resources/Documents#Publications.

Thanatochemistry at the crime scene: a microfluidic paper-based device for ammonium analysis in the vitreous humor

Most of the on-site approaches for inferring of the post-mortem interval are still based on observative data from the direct body inspection, whereas, objective and quantitative analyses, such as potassium in the vitreous humor, are require laboratory instrumentation and skilled personnel. The present paper presents a simple and low cost analytical method suitable for use at the crime scene for inferring the time since death. The method uses a microfluidic paper-based device (μPAD) for the determination of ammonium in the vitreous humor (VH) based on the selective interaction between the ammonium and the Nessler's reagent. The color change was measured in terms of "RGB distance" by using a simple and free smartphone application. The optimized device showed a limit of detection of 0.4 mmol L^-1, with between days precision less than 9.3% expressed as relative standard deviation, and accuracy between days from 94.5% to 104.5%. The selectivity of the Nessler's reaction was tested towards the main vitreous humor compounds, and no significant interferences were found. This paper-based analytical device was successfully used for the determination of ammonium ion in VH samples from forensic autopsies. The results obtained with the proposed method, although for a limited number of cases (n = 25), showed a close correlation with the data obtained with an instrumental analysis based on capillary electrophoresis. Moreover, in order to make the evaluation of results as simple as possible, a direct correlation between the color intensity, expressed as RGB distance, and the post-mortem interval was studied and a significant correlation was found (R² > 0.78). In conclusion, the present preliminary study showes that the proposed device could be an additional tool to the traditional methods for a more accurate, although still presumptive, estimation of the time of death directly at the crime scene.

Paper-based microfluidic devices based on 3D network polymer hydrogel for the determination of glucose in human whole blood

In this study, optical microfluidic paper analytical devices (μPADs) for glucose detection from whole blood samples with a small sample volume (2 μL) have been developed on a single paper. In the proposed method, a mushroom-shaped analytical device contains a sample inlet zone and a detection zone. When blood is dripped onto the inlet region of a μPAD, the plasma diffuses to the detection region. The detection region is implanted with a metallic three-dimensional (3D) polymer hydrogel vehicle. The gel vehicle consists of a copper complex that responds to oxygen changes and glucose oxidase (GOx) immobilized inside the gel as a bioactivity preservative. The phosphorescence of the copper complex is enhanced by oxygen consumed by detection of glucose with a limit of detection (S/N = 3) of 0.44 mM, and the total analysis of the sample is completed within 1 min. The validity of the proposed research is demonstrated using control samples and real-world whole blood samples of glucose concentrations ranging from 3 to 200 mM, and the detection results are shown to be in agreement with those obtained using a glucometer. Attaining a simple device for analysing glucose in human whole blood without any pretreatment procedures and having a broad sensing range while consuming a small sample volume remain challenging; thus, our new analytical device is of great interest.

Design of novel, simple, and inexpensive 3D printing-based miniaturized electrochemical platform containing embedded disposable detector for analytical applications

This paper describes the development of a novel, simple, and inexpensive electrochemical device containing an integrated and disposable three-electrode system for detection. The base of this platform consists on a PDMS structure containing microchannels which were prototyped using 3D-printed molds. Pencil graphite leads were inserted into these microchannels and utilized as working, counter and reference electrodes in a novel design. Morphological analysis and electrochemical experiments with benchmark redox probes were carried out in order to evaluate the performance and characterize the miniaturized device proposed. Even using inexpensive materials and a simple fabrication protocol, the electrochemical platform developed provided good repeatability and reproducibility over a low cost (ca. $2 per device), acceptable lifetime (ca. 250 voltammetric runs) and extremely reduced consumption of samples and reagents (order of µL). As proof of concept, the analytical feasibility of the platform was investigated through the simultaneous determination of dopamine (DOPA) and acetaminophen (AC). The two analytes showed linear dependence on the concentration range from 1 to 15 µM and the LODs achieved were 0.21 µM for DOPA and 0.29 µM for AC. Moreover, the platform was successfully applied on the determination of DOPA and AC in spiked blood serum and urine samples. The results obtained with the device described here were better than some reports in literature that use more costly electrodic materials and complex modification steps for the detection of the same analytes.

New Single-Layered Paper-Based Microfluidic Devices for the Analysis of Nitrite and Glucose Built via Deposition of Adhesive Tape

A simple, low-cost technique has been developed for the rapid fabrication of single-layered paper-based microfluidic devices (μPADs). This technique, for the first time, made use of the deposition of patterned adhesive tape into the filter paper to construct hydrophobic barriers, with the help of toluene. Unlike other reported multi-layered μPADs that merely made use of adhesive tape as a separate layer for sealing or fluid flow controlling, the patterned adhesive tape was simultaneously dissolved and penetrated into the filter paper, which resulted in the successful transfer of the pattern from the tape to the filter paper. To demonstrate the effectiveness of this approach, nitrite and glucose were individually measured; detection limits as low as 0.015 ± 0.004 mM and 0.022 ± 0.006 mM were reported for nitrite and glucose, respectively. Multiplexed analysis of both analytes was also carried out with respective detection limits of 0.048 ± 0.005 mM and 0.025 ± 0.006 mM for nitrite and glucose. The application of the method was demonstrated by measuring nitrite and glucose in spiked artificial urine samples and satisfied recovery results were obtained.

Forensic Analysis and Differentiation of Black Powder and Black Powder Substitute Chemical Signatures by Infrared Thermal Desorption-DART-MS

The trace detection and forensic analysis of black powders and black powder substitutes, directly from wipe-based sample collections, was demonstrated using infrared thermal desorption (IRTD) coupled with direct analysis in real time mass spectrometry (DART-MS). Discrete 15 s heating ramps were generated, creating a thermal desorption profile that desorbed more volatile species (e.g., organic and semivolatile inorganic compounds) at lower temperatures (250-400 °C) and nonvolatile inorganic oxidizers at high temperatures (450-550 °C). Common inorganic components of black powders (e.g., sulfur and potassium nitrate) as well as the alternative and additional organic and inorganic components of common black powder substitutes (e.g., dicyandiamide, ascorbic acid, sodium benzoate, guanidine nitrate, and potassium perchlorate) were detected from polytetrafluoroethylene-coated fiberglass collection wipes with no additional sample preparation. IRTD-DART-MS enabled the direct detection of intact inorganic salt species as nitrate adducts (e.g., [KClO4+NO3]-) and larger clusters. The larger ion distributions generated by these complex mixtures were differentiated using principal component analysis (PCA) of the mass spectra generated at two points during the thermal desorption profile (low and high temperatures), as well as at high in-source collision-induced dissociation. The PCA framework generated by the analysis of the two black powders and five black powder substitutes was used to classify samples collected from a commercial firecracker containing both flash powder and black powder. The coupling of IRTD-DART-MS and multivariate statistics demonstrated the powerful utility for detection and discrimination of trace fuel-oxidizer mixtures.