Edible nano-bio-composite film cargo device for food packaging applications

Nanoparticles loaded with pharmacologically active plant-derived natural products: Biomedical applications and toxicity

Pharmacologically active natural products have played a significant role in the history of drug development. They have acted as sources of therapeutic drugs for various diseases such as cancer and infectious diseases. However, most natural products suffer from poor water solubility and low bioavailability, limiting their clinical applications. The rapid development of nanotechnology has opened up new directions for applying natural products and numerous studies have explored the biomedical applications of nanomaterials loaded with natural products. This review covers the recent research on applying plant-derived natural products (PDNPs) nanomaterials, including nanomedicines loaded with flavonoids, non-flavonoid polyphenols, alkaloids, and quinones, especially their use in treating various diseases. Furthermore, some drugs derived from natural products can be toxic to the body, so the toxicity of them is discussed. This comprehensive review includes fundamental discoveries and exploratory advances in natural product-loaded nanomaterials that may be helpful for future clinical development.

Development and characterization of active packaging films based on chitosan, plasticizer, and quercetin for repassed oil storage

Novel chitosan (Ch) films containing choline chloride and citric acid mixture as plasticizer (deep eutectic solvent, DES) and different amounts of quercetin (QUE) as antioxidant additive were prepared. Physicochemical and mechanical characteristics of the developed Ch/DES/QUE films were studied using FTIR, SEM, and AFM techniques. FTIR spectra revealed the possible interactions between all the components. The surface of the films was dense and rough. The addition of quercetin caused an increase in the tensile strength (TS) and Young's modulus, but significantly decreased the elongation at break. The films containing quercetin showed improved antioxidant activity in relation to Ch/DES film. Finally, the oxidation phenomena of rapeseed oils with and without chitosan films were evaluated as amounts of primary and secondary oxidation products and total oxidation index. The addition of Ch/DES films with quercetin to oil samples successfully retarded secondary lipid oxidation processes and improved its antioxidant activity under the accelerated storage condition.

Transdermal therapeutic system: Study of cellulose nanocrystals influenced methylcellulose-chitosan bionanocomposites

Over the past few years, there is a drive toward the fabrication and application of bio-based non-cytotoxic drug carriers. Cellulose nanocrystals (CNCs) have gotten immense research attention as a promising bioderived material in the biomedical field due to its remarkable properties. The delivery of analgesic and anti-inflammatory drug, ketorolac tromethamine (KT) by transdermal route is stipulated herewith to fabricate suitable transdermal therapeutic systems. We have synthesized CNCs from jute fibers and aim to develop a non-cytotoxic polymer-based bionanocomposites (BNCs) transdermal patch, formulated with methylcellulose (MC), chitosan (CH), along with exploration of CNCs for sustained delivery of KT, where CNCs act as nanofiller and elegant nanocarrier. CNCs reinforced MCCH blends were prepared via the solvent evaporation technique. The chemical structure, morphology, and thermal stability of the prepared bionanocomposites formulations were studied by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), TGA, DSC, DMA, and SEM. The In vitro drug release studies were executed using Franz diffusion cells. The BNC patches showed in-vitro cytocompatibility and the drug release study revealed that BNC containing 1 wt% CNCs presented the best-sustained drug release profile. The bioderived CNCs appear to enhance the BNCs drug's bioavailability, which could have a broad prospect for TDD applications.

Preparation and characterization of Sargassum pallidum polysaccharide nanoparticles with enhanced antioxidant activity and adsorption capacity

Sargassum pallidum polysaccharide nanoparticle (nSPP-30) was prepared via antisolvent precipitation method and the preparation conditions were optimized. The effects of nanocrystallization on the structure and biological activities of S. pallidum polysaccharide were investigated. Under the optimal preparation condition, the average particle size, polydispersity index (PDI), and ξ-potential of nSPP-30 were 229.63 nm, 0.407, and -28.43 mV, respectively. Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analyses indicated that nanocrystallization did not change primary and crystal structures of S. pallidum polysaccharide. However, nanocrystallization could improve the swelling, thermodynamic, and antioxidant properties of S. pallidum polysaccharide. In addition, the thymol adsorption capacity of nSPP-30 was enhanced as compared to the corresponding polysaccharide. These results suggest that nSPP-30 can be developed as a potential antioxidant or natural nano-carrier to encapsulate thymol for practical applications.

Application of nanotechnology in agriculture, postharvest loss reduction and food processing: food security implication and challenges

Ensuring food security in developing countries is highly challenging due to low productivity of the agriculture sector, degradation of natural resources, high post farming losses, less or no value addition, and high population growth. Researchers are striving to adopt newer technologies to enhance supply to narrow the food demand gap. Nanotechnology is one of the promising technologies that could improve agricultural productivity via nano fertilizers, use of efficient herbicides and pesticides, soil feature regulation, wastewater management, and pathogen detection. It is equally beneficial for industrial food processing with enhanced food production with excellent market value, elevated nutritional and sensing property, improved safety, and better antimicrobial protection. Nanotechnology can also reduce post-farming losses by increasing the shelf life with the aid of nanoparticles. However, further investigation is required to solve the safety and health risks associated with the technology.

Preparation and characterization of polylactic acid nanofiber films loading Perilla essential oil for antibacterial packaging of chilled chicken

Biodegradable and eco-friendly food packaging materials have attracted attention. Novel blending films were prepared with polylactic acid (PLA) and Perilla essential oil (PEsO). The morphological features of the nanofibers were modulated by adjusting process parameters (e.g. PLA solution concentration, applied voltage and ultrasonic power). The optimal spinning concentrations, applied voltages and ultrasonic power of the PLA solutions were set at 15% (m/v), 20 kV and 640 W, respectively. Compared with the PLA films, the addition of PEsO increased the diameter of the nanofibers and solvent resistance and reduced the swelling rate of the PLA/PEsO films. The breakage elongation and the gas barrier properties significantly improved when 2% (w/w) PEsO was used. Fourier infrared spectroscopy, X-ray diffractometer, thermogravimetry and differential scanning were used in analyzing the potential interactions of the film matrices. The PLA/PEsO films had good biocompatibility and antibacterial and antioxidant properties. The PLA/PEsO (1:0.02) film loaded with 2% PEsO extended the shelf life of chilled chicken to 12 days, as indicated by the measured total volatile basic nitrogen (TVB-N), total viable count and pH value. Therefore, PLA/PEsO films have great potential as fresh-keeping packaging.

Antibacterial Films Based on Polylactide with the Addition of Quercetin and Poly(Ethylene Glycol)

A series of new films with antibacterial properties has been obtained by means of solvent casting method. Biodegradable materials including polylactide (PLA), quercetin (Q) acting as an antibacterial compound and polyethylene glycol (PEG) acting as a plasticizer have been used in the process. The effect of quercetin as well as the amount of PEG on the structural, thermal, mechanical and antibacterial properties of the obtained materials has been determined. It was found that an addition of quercetin significantly influences thermal stability. It should be stressed that samples containing the studied flavonoid are characterized by a higher Young modulus and elongation at break than materials consisting only of PLA and PEG. Moreover, the introduction of 1% of quercetin grants antibacterial properties to the new materials. Recorded results showed that the amount of plasticizer did not influence the antibacterial properties; it does, however, cause changes in physicochemical properties of the obtained materials. These results prove that quercetin could be used as an antibacterial compound and simultaneously improve mechanical and thermal properties of polylactide-based films.

Comparison of Polysaccharides as Coatings for Quercetin-Loaded Liposomes (QLL) and Their Effect as Antioxidants on Radical Scavenging Activity

Liposomes are microstructures containing lipid and aqueous phases employed in the encapsulation and delivery of bioactive agents. Quercetin-loaded liposomes (QLLs) were coated with three different polysaccharides and then tested as radical scavengers. Lactose (LCQLL), chitosan (CCQLL), and inulin (ICQLL) were employed as coating materials. Particle size determined by light scattering, showed primary size of 200 nm for all samples, while a secondary particle size of 600 nm was observed for CCQLL. Scanning electron microscopy (SEM) evidenced particle aggregation with the addition of the polysaccharide coating. Transmission electron microscopy (TEM) revealed the layered microstructure of liposomes composed of at least two layers, and primary particle size below 100 nm. QLL showed higher antioxidant activity than the coated liposomes. This behavior was attributed to the chemical interaction between quercetin and the corresponding coating polysaccharide in the layered structure, which traps the quercetin and keeps it unavailable for radical scavenging. From the three polysaccharides, lactose showed a better performance as coating material in the antioxidant activity, which suggested that the smaller size of the disaccharide molecule resulted in a faster releasing of the quercetin in the solution. Thus, LCQLL is an advantageous way to deliver quercetin for antioxidant purposes, where the low stability in delivered media of quercetin loaded liposomes is commonly compromised.

Encapsulation Systems for Antimicrobial Food Packaging Components: An Update

Antimicrobially active packaging has emerged as an effective technology to reduce microbial growth in food products increasing both their shelf-life and microbial safety for the consumer while maintaining their quality and sensorial properties. In the last years, a great effort has been made to develop more efficient, long-lasting and eco-friendly antimicrobial materials by improving the performance of the incorporated antimicrobial substances. With this purpose, more effective antimicrobial compounds of natural origin such as bacteriocins, bacteriophages and essential oils have been preferred over synthetic ones and new encapsulation strategies such as emulsions, core-shell nanofibres, cyclodextrins and liposomes among others, have been applied in order to protect these antimicrobials from degradation or volatilization while trying to enable a more controlled release and sustained antimicrobial action. On that account, this article provides an overview of the types of antimicrobials agents used and the most recent trends on the strategies used to encapsulate the antimicrobial agents for their stable inclusion in the packaging materials. Moreover, a thorough discussion regarding the benefits of each encapsulation technology as well as their application in food products is presented.

Synthesis, characterization and application of gelatin-carboxymethyl cellulose blend films for preservation of cherry tomatoes and grapes

In the present study, gelatin-carboxymethyl cellulose blend film was synthesized, characterized and applied for the first time to preserve cherry tomatoes (Solanum lycopersicum var. cerasiforme) and grapes (Vitis vinifera). Gelatin (Gel) film forming solution was incorporated with carboxymethyl cellulose (CMC) at three volume per volume (Gel:CMC) ratios, namely 75:25, 50:50 and 25:75. CMC treatment has improved the transparency, tensile strength (TS), elongation at break (EAB), water vapor permeability and oxygen permeability of gelatin films. A pronounced effect was obtained for 25Gel:75CMC film. The TS and EAB values were increased from 25.98 MPa and 2.34% (100Gel:0CMC) to 37.54 MPa and 4.41% (25Gel:75CMC), respectively. A significant improvement in antimicrobial property of gelatin films against two food pathogens, namely Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was obtained in the presence of CMC. The effectiveness of gelatin-CMC blend films to extend the shelf life of agricultural products was evaluated in a 14-day preservation study. The gelatin-CMC films were successfully controlled the weight loss and browning index of the fruits up to 50.41% and 31.34%, respectively. Overall, gelatin-CMC film is an environmental friendly film for food preservation.

A comprehensive perspective of food nanomaterials

Nanotechnology is a rapidly developing toolbox that provides solutions to numerous challenges in the food industry and meet public demands for healthier and safer food products. The diversity of nanostructures and their vast, tunable functionality drives their inclusion in food products and packaging materials to improve their nutritional quality through bioactive fortification and probiotics encapsulation, enhance their safety due to their antimicrobial and sensing capabilities and confer novel sensorial properties. In this food nanotechnology state-of-the-art communication, matrix materials with particular focus on food-grade components, existing and novel production techniques, and current and potential applications in the fields of food quality, safety and preservation, nutrient bioaccessibility and digestibility will be detailed. Additionally, a thorough analysis of potential strategies to assess the safety of these novel nanostructures is presented.

Development and characterization of antioxidant active packaging and intelligent Al3+-sensing films based on carboxymethyl chitosan and quercetin

Different amounts of quercetin were mixed with carboxymethyl chitosan (CMCS) to develop novel antioxidant active packaging and intelligent Al³⁺-sensing films. The physical properties, structure, antioxidant and Al³⁺-sensing abilities of CMCS-quercetin composite films were investigated. Results showed CMCS-quercetin composite films presented a dark yellowish color. When compared with CMCS film, CMCS-quercetin composite films containing 5 and 7.5 wt% of quercetin on CMCS basis exhibited higher thicknesses, opacity and thermal stability; however, presented lower moisture contents, UV-vis light transmittance and elongation at break. Besides, the incorporation of quercetin could not significantly change the water solubility and water vapor barrier property of CMCS film. Morphological observation showed the surface of CMCS-quercetin composite film became coarse when 7.5 wt% of quercetin was incorporated. Infrared spectra and X-ray diffraction patterns of CMCS-quercetin composite films further indicated quercetin was compatible with CMCS. Importantly, CMCS-quercetin composite films could sustainably release antioxidant ability into aqueous and fatty food stimulants. Moreover, CMCS-quercetin composite films were sensitive to Al³⁺. The color and UV-vis absorption patterns of CMCS-quercetin composite films were changed by the addition of Al³⁺. Results suggested that CMCS-quercetin composite films could be used as novel antioxidant and intelligent Al³⁺-sensing materials in food packaging.

Scale-Up Preparation and Characterization of Collagen/Sodium Alginate Blend Films

In an effort to produce scale-up of edible films, collagen-based films including different amounts of sodium alginate (CS) were prepared by casting method. Films were characterized based on their rheological, thermal, and mechanical properties, water vapor permeability (WVP), and oxygen permeability (OP). The microstructures were also evaluated by scanning electron microscopy (SEM), atomic force microscopy (AFM), and Fourier transform-infrared spectroscopy (FTIR). Furthermore, the addition of sodium alginate effectively improved the viscosity and thermal stability, significantly increased TS, and decreased E and WVP (P<0.05), but with no obvious effect on OP (P>0.05). SEM and AFM showed homogeneous matrix, with no signs of phase separation in the blends. Overall, films (CS2) produced using collagen (g) : sodium alginate (g) = 10 : 2 showed suitable rheological property (apparent viscosity was 4.87 m Pa s−1) and better TS (26.49 Mpa), E (64.98%), WVP (1.79 × 10−10 g·cm−1·s−1·Pa−1), and OP (3.77 × 10−5 cm3·m−2·d−1·Pa−1).