Oligomers in polyethylene naphthalate and polybutylene terephthalate – Identification and exploring migration

Mass spectral characterisation of cyclic oligoesters in a biodegradable mulch film

RATIONALE

Plastic mulch film manages weed growth and moisture loss on the surface of cropping beds. The chemical components of such plastics include polymer(s), additives and non-intentionally added substances (NIASs). The unknown chemical nature and behaviours of these constituents require investigation due to their potential to add to the anthropogenic chemical burden in the agrifood system.

METHODS

Solvent extracts of a commercial 15% polylactic acid (PLA)/85% poly(butylene adipate-co-terephthalate) mulch film were investigated using gas chromatography-mass spectrometry (GC-MS) with electron ionisation to characterise the additive and NIAS components. The obscurity of some of the NIASs meant their identification was not readily achieved through routine MS library comparisons. As such, the identification of several polymer-derived compounds required interpretation of the MS data and re-application of the derived fragmentation patterns with reference to the wider literature. Unknowns were confirmed using commercially available compounds.

RESULTS

Unknown NIASs were identified as cyclic oligoesters comprised of the monomeric building blocks of the polymer system. Cyclic structures derived from the monomers of polybutylene adipate (PBA) and polybutylene terephthalate (PBT) fragmented through a primary pathway involving 1,5- and 1,3-H transfers at ester linkages. Characteristic ions at m/z 111, 129, 183 and 201 for PBA-derived cyclic oligoesters and m/z 104, 132, 149 and 221 for PBT-derived cyclic oligoesters were assigned in the mass spectra of unknowns. Cyclic oligoesters containing sebacate moieties were also identified, indicating the presence of polybutylene sebacate as an unexpected component of the mulch.

CONCLUSIONS

Systematic analyses of the sort reported here are valuable for providing alternative approaches for the identification of plastic-related chemicals. Open publication of MS spectral data is required to build a greater understanding of the mulch film chemical components contributing to the environmental chemical load introduced to agroecosystems.

Nano- and Microplastics Migration from Plastic Food Packaging into Dairy Products: Impact on Nutrient Digestion, Absorption, and Metabolism

The ongoing use of plastic polymers to manufacture food packaging has raised concerns about the presence of nano- and microplastics (NMPs) in a variety of foods. This review provides the most recent data on NMPs' migration from plastic packaging into dairy products. Also discussed are the possible effects of NMPs on nutrient digestion, absorption, and metabolism. Different kinds of dairy products, including skimmed milk, whole liquid milk, powder milk, and infant formula milk, have been found to contain NMPs of various sizes, shapes, and concentrations. NMPs may interact with proteins, carbohydrates, and fats and have a detrimental impact on how well these nutrients are digested and absorbed by the body. The presence of NMPs in the gastrointestinal tract may impact how lipids, proteins, glucose, iron, and energy are metabolized, increasing the risk of developing various health conditions. In addition to NMPs, plastic oligomers released from food packaging material have been found to migrate to various foods and food simulants, though information regarding their effect on human health is limited. Viewpoints on potential directions for future studies on NMPs and their impact on nutrient digestion, absorption, and health are also presented in this review.

Migration of oligomers from Tritan™ copolyester: application of hydrolysis for overall oligomer determination

Tritan™ (a kind of glycol-modified polycyclohexylene dimethylene terephthalate) is a novel copolyester mainly in use for the production of sports bottles and food storage containers. Oligomers in three food-grade Tritan™ samples were identified after dissolution-precipitation by high performance liquid chromatography with diode array detection and mass spectrometry and quantified after alkaline hydrolysis to the monomers. The obtained overall oligomer content <1000 Da determined by hydrolysis ranged from 7.2 to 10.6 mg/g material. Three consecutive migration experiments were performed according to the Commission Regulation (EU) No 10/2011. Oligomer migration values decreased from first to third migration during all simulations. Less than 25 µg/kg (third migrate) were detected in bottle migrates when tested under room temperature storage conditions (40 °C, 24 h) with simulants 3% acetic acid, 20 and 50% ethanol and during hot-fill testing (70 °C, 2 h) with simulants 3% acetic acid and 20% ethanol, respectively, while 170 µg/kg were determined in 50% ethanol after migration at 70 °C for 2 h. Food storage containers that were labelled as microwave-suitable by the supplier were tested according to the Joint Research Centre recommendations for microwave dishware. A strong deformation of the containers as well as a loss of transparency were observed during the tests (100 °C, 2 h with 10% ethanol and 3% acetic acid in an autoclave, 121 °C, 30 min with sunflower oil), questioning the suitability of the material for microwave applications. Maximum oligomer migration was 379 µg/kg during the third migration (sunflower oil at 121 °C for 30 min). Based on the migration data and an in silico oligomer evaluation according to the threshold of toxicological concern concept, no exceedances of daily thresholds for oligomers are expected from a proper use of Tritan™ drinking bottles, even with hot drinks.

Poly(ethylene terephthalate), Poly(butylene terephthalate), and Polystyrene Oligomers: Occurrence and Analysis in Food Contact Materials and Food

Polyesters (PES) and polystyrene (PS) are among the most used plastics in the production of food contact materials (FCM). The existence of compounds that could migrate from these materials into food requires a constant analytical control to ensure the safety of consumers due to consumption. It also implies a significant research challenge for their identification and quantification. One of the most important groups of known FCM migrants are the substances known as oligomers. PES and PS oligomers have long been suspected to possess some toxicological effects. The International Agency for Research on Cancer and the European Food Safety Authority alerted recently to the potential carcinogenicity of styrene, with its oligomers consequently being also in the spotlight. At the same time, PES cyclic oligomers are categorized as having Cramer III toxicity. Many recent works on the occurrence of poly(ethylene terephthalate) (PET), poly(butylene terephthalate) (PBT), and PS oligomers in FCM and food have been published. The oligomeric chemical analysis requires the use of demanding analytical strategies to address their different physicochemical characteristics (melting points, octanol/water partition coefficients, and solubility properties). Chromatographic methods are normally preferred due to the intrinsic complexity of the target matrices, but the reduced amount of reliable analytical standards still hinders the widespread screening analysis of oligomers in food. This work presents the most relevant recent studies and analytical methodologies used in the analysis of PET, PBT, and PS oligomers in food and FCM, as well as current and future challenges.

Oligomers in polybutylene terephthalate for food contact-strategies on identification, quantification, and risk assessment

Oligomers are a significant group of migrating substances from food contact materials made of polyesters like polybutylene terephthalate (PBT). Twenty-three cyclic and linear oligomers with different end groups including olefin-terminated oligomers, which are associated with thermal stress of the material, were tentatively identified in PBT extracts by high-performance liquid chromatography with mass spectrometry and diode array detection. Quantification approaches based on chromophore concentration, relative response factors, and overall oligomer determination after hydrolysis to the monomer terephthalic acid were employed. An exhaustive extraction of thirteen PBT samples yielded an overall oligomer content of 1.87-6.10 mg/g material (sum of individual oligomers < 1,000 Da) with a predominant content of cyclic over linear oligomers. Migration experiments were performed according to Regulation (EU) No. 10/2011 using the official food simulants as well as cows' milk. A total of 218 µg cyclic oligomers/L milk were detected in the third migrate relevant for risk assessment of repeated-use articles under hot-fill conditions (70 °C, 2 h). The official food simulant for milk, 50% ethanol, was found to overestimate the actual migration into milk by a factor of four. Frying conditions using sunflower oil as the food simulant (200 °C, 10 min) resulted in a migration of 7.5 mg cyclic oligomers/kg oil. The exposure to migrating oligomers is critical in some scenarios when evaluated by the threshold of toxicological concern concept; however, the toxicological evaluation poses a challenge due to the possible hydrolysis of cyclic oligomers in the human gastrointestinal tract. Our experiments display the need for a toxicological evaluation of PBT oligomers because the migration of cyclic oligomers is expected to exceed the current in silico-based thresholds under foreseeable conditions of use.

Evaluating the food safety and risk assessment evidence-base of polyethylene terephthalate oligomers: Protocol for a systematic evidence map

BACKGROUND

Polyethylene terephthalate (PET) oligomers are ubiquitous in PET used in food contact applications. Consumer exposure by migration of PET oligomers into food and beverages is documented. However, no specific risk assessment framework or guidance for the safety evaluating of PET oligomers exist to date.

AIM

The aim of this systematic evidence map (SEM) is to identify and organize existing knowledge clusters and associated gaps in hazard and exposure information of PET oligomers. Research needs will be identified as an input for chemical risk assessment, and to support future toxicity testing strategies of PET oligomers and regulatory decision-making.

SEARCH STRATEGY AND ELIGIBILITY CRITERIA

Multiple bibliographic databases (incl. Embase, Medline, Scopus, and Web of Science Core Collection), chemistry databases (SciFinder-n, Reaxys), and gray literature sources will be searched, and the search results will be supplemented by backward and forward citation tracking on eligible records. The search will be based on a single-concept PET oligomer-focused strategy to ensure sensitive and unbiased coverage of all evidence related to hazard and exposure in a data-poor environment. A scoping exercise conducted during planning identified 34 relevant PET oligomers. Eligible work of any study type must include primary research data on at least one relevant PET oligomer with regard to exposure, health, or toxicological outcomes.

STUDY SELECTION

For indexed scientific literature, title and abstract screening will be performed by one reviewer. Selected studies will be screened in full-text by two independent reviewers. Gray literature will be screened by two independent reviewers for inclusion and exclusion.

STUDY QUALITY ASSESSMENT

Risk of bias analysis will not be conducted as part of this SEM.

DATA EXTRACTION AND CODING

Will be performed by one reviewer and peer-checked by a second reviewer for indexed scientific literature or by two independent reviewers for gray literature.

SYNTHESIS AND VISUALIZATION

The extracted and coded information will be synthesized in different formats, including narrative synthesis, tables, and heat maps.

SYSTEMATIC MAP PROTOCOL REGISTRY AND REGISTRATION NUMBER

Zenodo: https://doi.org/10.5281/zenodo.6224302.

The shelf-life of chestnut rose beverage packaged in PEN/PET bottles under long term storage: A comparison to packaging in ordinary PET bottles

The shelf life of chestnut rose beverage is largely dependent on packaging method and storage temperature. In this study, we investigated the effects of packaging beverages in bottles made of either polyethylene terephthalate (PET) or PEN (polyethylene naphthalate)/PET and storage temperature (4, 25, 37, and 55 ℃) on the shelf life of chestnut rose beverage. The physicochemical parameters and enzyme activity of beverages were evaluated, and we found that at 4 °C, the vitamin C, superoxide dismutase, and total polyphenol contents of beverages stored in PEN/PET bottles increased by 9.95 ± 0.49%, 2.86 ± 0.13%, and 3.23 ± 0.09% respectively, compared to beverages in ordinary PET bottles. In addition, other characteristic indicators including total soluble solids, browning index, and color value were also significantly improved. A shelf-life model was established based on the Arrhenius equation, and it will help distributors and consumers to determine the storage time and optimal shelf life of chestnut rose beverage.

The use of ion mobility time-of-flight mass spectrometry to assess the migration of polyamide 6 and polyamide 66 oligomers from kitchenware utensils to food

Oligomers, are, in general, unknown components of the polymer. These oligomers can migrate from the polymer into the food and become a non-intentionally added substance to the food. In this work, ion mobility time-of-flight mass spectrometry has been used to identify oligomers migrating from kitchenware. The structure elucidation of oligomers from polyamide 6 and polyamide 66 was achieved through the analysis of accurate m/z values of adducts and collision cross section values of precursor ions together with high-energy fragmentation patterns. Additionally, a method to extract oligomers from sunflower oil, cooked beans, soup and whole milk has been developed. Extraction recoveries ranged from 87 to 102% and limits of detection were from 0.03 to 0.11 mg/kg. It was observed that the migration from kitchenware to real food was below the specified migration limit of 5 mg/kg. However, this limit was exceeded for food simulants, which therefore overestimated the oligomer migration.

Development and validation of an UHPLC-qTOF-MS method for the quantification of cyclic polyesters oligomers in pasta by applying a modified QuEChERS clean-up

An Ultra High-Performance Liquid chromatography method quadruple time-of-flight mass spectrometry has been developed for the analysis of 11 cyclic polyesters oligomers, following a modified QuEChERS clean-up with alumina/primary secondary amine, in pasta. Target analytes were polyethylene terephthalate (PET) 1^st series cyclic dimer to heptamer, polybutylene terephthalate (PBT) dimer to pentamer and a polyurethane oligomer. Standard addition method was applied for the calibration, and the limits of quantification ranged from 3.2 to 17.2 ng g^-1. Recoveries ranged from 86.4 to 109.8%, RSDs were lower than 12% for all analytes, and matrix effect never exceeded ± 2.5%. The method was successfully applied to real commercial pasta samples, where the PET 1^st series cyclic trimer was the most abundant oligomer, being found in all tested samples. The 1^st series PET cyclic dimer and tetramer, as well as 1,4,7-trioxacyclotridecane-8,13-dione, were found in considerable amounts. Traces of the 2^nd and 3^rd series PET cyclic dimers were also found.

Analytical Approaches for Analysis of Safety of Modern Food Packaging: A Review

Nowadays, food packaging is a crucial tool for preserving food quality and has become an inseparable part of our daily life. Strong consumer demand and market trends enforce more advanced and creative forms of food packaging. New packaging development requires safety evaluations that always implicate the application of complex analytical methods. The present work reviews the development and application of new analytical methods for detection of possible food contaminants from the packaging origin on the quality and safety of fresh food. Among food contaminants migrants, set-off migrants from printing inks, polymer degradation products, and aromatic volatile compounds can be found that may compromise the safety and organoleptic properties of food. The list of possible chemical migrants is very wide and includes antioxidants, antimicrobials, intentionally added substances (IAS), non-intentionally added substances (NIAS), monomers, oligomers, and nanoparticles. All this information collected prior to the analysis will influence the type of analyzing samples and molecules (analytes) and therefore the selection of a convenient analytical method. Different analytical strategies will be discussed, including techniques for direct polymer analysis.