Nanocomposite coating based on carrageenan and ZnO nanoparticles to maintain the storage quality of mango

Integrated self-assembly and cross-linking technology engineered photodynamic antimicrobial film for efficient preservation of perishable foods

A new antibacterial film was constructed to combat the severe spoilage of fruits and vegetables caused by microorganisms. Specifically, photoresponsive cinnamaldehyde-tannic‑iron acetate nanospheres (CTF NPs) were prepared using ultrasonic-triggered irreversible equilibrium self-assembly and ionic cross-linking co-driven processes and were integrated into the matrix of κ-carrageenan (KC) (CTF-KC films) as functional fillers. The CTF0.4-KC film (KC film doped with 0.4 mg/mL CTF NPs) showed a 99.99% bactericidal rate against both E. coli and S. aureus, extended the storage period of cherry tomatoes from 20 to 32 days. The introduction of CTF enhanced the barrier, thermal stability, and mechanical strength properties, albeit with a slight compromise on transparency. Furthermore, the biosafety of the CTF0.4-KC film was confirmed through hemolysis and cytotoxicity tests. Together, the aforementioned results demonstrated the outstanding antibacterial and fresh-keeping properties of CTF0.4-KC. These desirable properties highlight the potential use of CTF0.4-KC films in food preservation applications.

Red dragon fruit-soy protein isolate biofilm: UV-blocking, antioxidant & improved mechanical properties for sustainable food packaging

In this study, an active biofilm was developed by incorporating red dragon fruit peel (RDF) extract into soy protein isolate (SPI) film matrix for sustainable food packaging. The addition of betalain-rich-RDF extract (1-7 wt%) significantly improved UV-blocking and antioxidant properties of the film compared to the control film. As wt% of RDF-extract increased, water vapor permeability, water solubility, and elongation at break decreased by 1.06 × 10-10 g m m-2 s-1 Pa-1, 34.25%, and 133.25%, respectively. On the other hand, Tensile strength increased significantly (P < 0.05) by 78.76%. FTIR results confirmed the intermolecular interaction between RDF extract and SPI through hydrogen bonding, while XRD result showed a decrease in the crystallinity degree of the film with RDF extract addition. However, no significant change in the TGA curve between extract-incorporated SPI films was observed. SEM analysis revealed that SPI B and SPI D films had a more compact and denser structure than the control film, while AFM analysis showed an increase in Ra and Rq values representing higher surface roughness of SPI D film. SPI D film also significantly (P < 0.05) decreased the weight loss and increased total soluble solids of freshly cut apples over 7-day storage period.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-05940-2.

Chitosan-based nanocomposite films with carnauba wax, rosin resin, and zinc oxide nanoparticles

This work aimed to develop edible emulsion-based barriers in the form of chitosan composite films, with a focus on assessing the impacts of carnauba wax, rosin resin, and zinc oxide nanoparticles on their properties. Six films were produced by casting using chitosan as polymer base and glycerol as plasticizer. Acetic acid and polysorbate 80 were also used to facilitate the dissolution and mixing of the components. The six filmogenic solutions contained chitosan at 1.2% w/v, wax or resin content with 0 or 0.6% m/v and ZnO with 0 or 0.05% m/v. The dried films were characterized according to their chemical, barrier, mechanical, thermal and optical properties. All treatments resulted in flexible films. Chitosan films appeared smoother and more uniform under SEM imaging, while carnauba wax films displayed roughness due to their hydrophobic nature. Wax and resin films were less transparent and water soluble than the chitosan-only films. On the other hand, the addition of ZnO in the formulations increased the solubility of the films. The sorption degree was in line with the solubility results, i.e., films with ZnO presented higher sorption degree and solubility values. All treatments showed low or non-light UV transmission, indicating that the films provide good barrier to UV light. In the visible light region, films of resin with ZnO showed the lowest transmittance values, hence offering a good barrier to visible light. Among the evaluated films, chitosan, and resin films with ZnO nanoparticles were more rigid and resistant to deformation. Overall, films produced with rosin resin and ZnO nanoparticles showed potential improvements in barrier, mechanical, thermal, and optical properties, mainly due to their low water solubility, good UV protection and low permeability to water vapor and oxygen, which are suitable for using in formulations, intended to produce edible films and coatings.

Comprehensive Literature Review on Metal Nanoparticle for Enhanced Shelf Life of Mango Fruit

The purpose of this review was to investigate the application of metal nanoparticles in fruit shelf life extension. Despite growing interest in nanoparticles and their potential applications, there are currently few effective methods for prolonging the shelf life of fruits. The study concentrated on the principles underlying the shelf life extension of metallic nanoparticles, including copper oxide, zinc oxide, silver, and titanium oxide. The biological properties of nanoparticles, especially those with antibacterial qualities, have drawn interest as possible fruit preservation solutions. Many conventional preservation methods have drawbacks, including expensive production costs, short shelf lives, undesirable residues, and the incapacity to properly keep perishable fruits in their natural environments. Techniques for extending shelf life based on nanotechnology have the potential to get around these problems. The review focused on the effective use of environmentally benign, green synthesis-produced nanoparticles to extend the fruit shelf life. The ability of these nanoparticles to successfully preserve fresh fruits was established. The results imply that fruit preservation by the use of nanoparticle synthesis techniques may be a viable strategy, offering a more effective and sustainable substitute for traditional procedures.

Revolutionizing tropical fruits preservation: Emerging edible coating technologies

Tropical fruits, predominantly cultivated in Southeast Asia, are esteemed for their nutritional richness, distinctive taste, aroma, and visual appeal when consumed fresh. However, postharvest challenges have led to substantial global wastage, nearly 50 %. The advent of edible biopolymeric nanoparticles presents a novel solution to preserve the fruits' overall freshness. These nanoparticles, being edible, readily available, biodegradable, antimicrobial, antioxidant, Generally Recognized As Safe (GRAS), and non-toxic, are commonly prepared via ionic gelation owing to the method's physical crosslinking, simplicity, and affordability. The resulting biopolymeric nanoparticles, with or without additives, can be employed in basic formulations or as composite blends with other materials. This study aims to review the capabilities of biopolymeric nanoparticles in enhancing the physical and sensory aspects of tropical fruits, inhibiting microbial growth, and prolonging shelf life. Material selection for formulation is crucial, considering coating materials, the fruit's epidermal properties, internal and external factors. A variety of application techniques are covered such as spraying, and layer-by-layer among others, including their advantages, and disadvantages. Finally, the study addresses safety measures, legislation, current challenges, and industrial perspectives concerning fruit edible coating films.

Physicochemical and quality characters of fresh pistachio (Pistacia vera L.) cultivars in response to chitosan/ZnO nanocomposite coating

This study was done to evaluate the effect of pre-harvest foliar application with chitosan (500 and 1000 mg L-1), Nano-chitosan (250 and 500 mg L-1), and chitosan/ZnO nanocomposite (250 and 500 mg L-1) coatings on the quality and shelf life of fresh pistachios of "Akbari" and "Ahmad Aghaei" cultivars during storage. The results showed that 250 and 500 mg L-1 of chitosan/ZnO coatings significantly affected the shelf life of pistachios up to 35 and 40 days, respectively; in addition, chitosan/ZnO nanocomposite in both cultivars reduced weight loss, aflatoxin contamination, decay, polyphenol oxidase and glutathione-peroxidase enzymes, peroxide value, free fatty acids, and improve firmness, sensory properties, protein, oil content, carbohydrate, antioxidant properties, anthocyanin, phenol, and flavonoid. These results indicated that using chitosan/ZnO (250 and 500 mg L-1) is a promising efficient, safe, and environmentally friendly method for preserving the quality of fresh pistachios. It reduces hull browning and minimizes post-harvest losses.

Potassium Permanganate-Impregnated Amorphous Silica-Alumina Derived from Sugar Cane Bagasse Ash as an Ethylene Scavenger for Extending Shelf Life of Mango Fruits

Ethylene, a plant hormone, is a gas that plays a crucial role in fruit ripening and senescence. In this work, a novel ethylene scavenger was prepared from amorphous silica-alumina derived from sugar cane bagasse ash (SC-ASA) and used to prolong the shelf life of mango fruits during storage. KMnO4 at 2, 4, or 6 wt %/w was loaded on SC-ASA using an impregnation method. The results showed that 4% w/w KMnO4 loaded on SC-ASA (4KM/SC-ASA) was superior for ethylene removal at an initial ethylene concentration of 400 μL L-1 for 120 min under ambient conditions (25-27 °C and 70-75% relative humidity), resulting in 100% ethylene removal. The kinetic study of ethylene removal showed that the adsorption data were best fitted with a pseudo-first-order kinetic model. The effects of 4KM/SC-ASA as sachets on the quality changes of the mango fruits were investigated, with the results showing that mango fruits packed in cardboard boxes with 4KM/SC-ASA had significantly delayed ripening, low levels of ethylene production, respiration, and weight loss, high fruit firmness, low total soluble solids, and high acidity compared to those of the control treatment. These findings should contribute to developing an ethylene scavenger to extend the shelf life of fruits, reduce the waste of the sugar and ethanol industries, and make it a valuable material.

Zinc oxide nanoparticle-reinforced pectin/starch functionalized films: A sustainable solution for biodegradable packaging

Environmental pollution caused by non-biodegradable plastic pollutants adversely affects various ecosystems. This study proposes the development of novel functional and biodegradable films based on corn starch (CST) and pectin (PEC) containing zinc oxide nanoparticles (ZnONPs) from the casting method. The films exhibited processability, transparency, low water vapor permeation, and desirable mechanical properties for food packaging and coating applications. The ZnONPs acted as a plasticizer, enhancing the film elongation at the break, increasing the pec25-1 (PEC 25 wt% and ZnONPs 1 wt%) elongation from 79.85 to 162.32 %. The improved film elasticity supported by ZnONPs reduced the material stiffness. However, the films still demonstrated an average tensile strength (0.69 MPa) 17-fold higher than the tensile strength (0.04 MPa) of the non-biodegradable commercial film based on poly(vinyl chloride). Furthermore, the ZnONPs enhanced the UV-blocking capabilities of the films, leading to wettable materials with water contact angles lower than 90°. The films showed high biodegradation rates under natural disposal conditions. The results indicated that the pec25-1/ZnONPs film is a promising eco-friendly coating in food preservation due to its biodegradability, suitable mechanical properties, low water vapor permeability, and UV-blocking properties.

Design of cationic surfactant reinforced carrageenan waterproof composite films and applied as water induced electricity generator

Carrageenan (CR) is a renewable polysaccharide material for packaging application due to its good film-forming property, but its use can be limited by the water solubility. In this research, CR hydrogels were modified by quaternary ammonium surfactants with different length of hydrocarbon tails (n, 8≦n≦16) by adsorption method and waterproof films were obtained after drying. The composition and charge interaction of composite films was confirmed by FTIR. Both thermogravimetric analysis and energy dispersive spectrometer indicated that the surfactant ions replaced K+ to form complexes with CR. The X-ray diffraction revealed the decreased amorphous nature of composite films compared to neat CR film. Water-related physical properties, such as water content, weight percentage change after contact with water, water vapor transmission, and water contact angle were intimately related to n. When 8≦n≦14, the waterproof properties were enhanced with the increase of n. Meanwhile, the waterproof property of composite film was ascertained by the no leakage result in the boiling water packaging experiment. When n = 16, sandwich structure was found in the sectional micromorphology images, and water bag structure formed after immersed into water. By comparing the mechanical properties of the composite films in different condition, we found that quaternary ammonium surfactants improved significantly the tensile strength in water and increased elongation at break in dry state. The composite films can be used as water induced voltage generator for their polyelectrolyte nature. Benefiting from the high stability of the composite films in water, their water-induced voltage generation process had good recyclability. Due to the antimicrobial activity of the quaternary ammonium salts and the waterproof property, composite films were more stable and degraded more slowly than neat CR film in nature environment.

Improvements in the color, phytochemical, and antioxidant properties of frozen ripe mango pieces using calcium chloride dipping and chitosan coating

This study aimed to investigate the influences of a dipping/coating composed of calcium chloride (CaCl2 ) or chitosan on the quality of ripe mango pieces during frozen storage for 6 months. The fruits were dipped in solutions with concentrations of 0.5% and 1% for different times (15 or 30 min for CaCl2 and 1 or 15 min for chitosan). We found that treatment with 1% CaCl2 for 30 min significantly retarded the color changes with the highest L* (p < 0.05) and the lowest of b* and ∆E (p ≥ 0.05). Interestingly, treatment with 0.5% CaCl2 for 30 min significantly preserved the contents of total phenolics and total flavonoids and the antioxidant activities at values higher than the control levels, as determined by DPPH and ABTS assays (p < 0.05). Moreover, treatment with 0.5%-1% chitosan for 1 min effectively delayed the loss of moisture and weight. The results indicate that dipping in CaCl2 is an alternative simple food processing technique for improving the quality of ripe mango pieces during frozen storage that effectively delays the color changes and preserves the antioxidant content and activity. HIGHLIGHTS: The coating of frozen ripe mango pieces with CaCl2 and chitosan was first investigated. CaCl2 effectively retarded the color change during storage and after thawing. Chitosan effectively delayed the loss of moisture and weight of mango pulp. Coating with 0.5% CaCl2 for 30 min maintained the phytochemicals and antioxidant activities. Coating treatment can preserve mango qualities and could be commercialized with cost savings. PRACTICAL APPLICATION: The present article proposes a strategy that effectively delays the physicochemical changes and preserves the nutritional properties of mango fruit and could be commercialized with cost savings. A frozen mango can either be consumed (ready-to-eat frozen mango) or used as a food raw material.

Metal-Based Nanoparticles in Food Packaging and Coating Technologies: A Review

Food security has continued to be a topic of interest in our world due to the increasing demand for food. Many technologies have been adopted to enhance food supply and narrow the demand gap. Thus, the attempt to use nanotechnology to improve food security and increase supply has emerged due to the severe shortcomings of conventional technologies, which have made them insufficient to cater to the continuous demand for food products. Hence, nanoparticles have been identified to play a major role in areas involving food production, protection, and shelf-life extensions. Specifically, metal-based nanoparticles have been singled out to play an important role in manufacturing materials with outstanding properties, which can help increase the shelf-life of different food materials. The physicochemical and biological properties of metal-based nanoparticles, such as the large surface area and antimicrobial properties, have made them suitable and adequately useful, not just as a regular packaging material but as a functional material upon incorporation into biopolymer matrices. These, amongst many other reasons, have led to their wide synthesis and applications, even though their methods of preparation and risk evaluation remain a topic of concern. This review, therefore, briefly explores the available synthetic methods, physicochemical properties, roles, and biological properties of metal-based nanoparticles for food packaging. Furthermore, the associated limitations, alongside quality and safety considerations, of these materials were summarily explored. Although this area of research continues to garner attention, this review showed that metal-based nanoparticles possess great potential to be a leading material for food packaging if the problem of migration and toxicity can be effectively modulated.

Locust bean gum/carboxycellulose nanocrystal coating incorporating ZnO clusters built by the accretion of micro spindles or sheets for strawberries preservation

Two shapes of ZnO clusters constructed by the growth of spindle-like (I-ZnO) and sheet-like (II-ZnO) microparticles added to Locust bean gum/carboxycellulose nanocrystal (LBG/C-CNC) coating for improving properties as the enhancers and antibacterial agents. Subsequently, active LBG/C-CNC/ZnO (LCZ) coatings were evaluated to combat the fruits rot triggered by microorganisms aiming to extend their shelf life. The results showed that II-ZnO clusters with flower-shape enhanced the properties more obviously due to more interaction sites. The oxygen and water vapor permeability of the coating containing 5 % II-ZnO (LCZII-5) decreased from 2.00 and 5.98 × 10^-11 to 0.6 cm³ mm m^-2 day^-1 atm^-1 and 1.85 × 10^-11 g m^-1 s^-1 Pa^-1, respectively. And the antibacterial rate against E. coli and S. aureus could reach more than 75 %. Meanwhile, the tensile strength (TS) increased by 50.95 %. The inhibition rates on strawberries of weight and Vc loss by LCZII-5 coating were 30.64 % and 53.59 %, respectively. More importantly, the coatings could be easily washed off with water in spite of tightly being connected with the surface of the strawberries. As was expected, this study provides a feasible method for preparing novel fruit coatings with an effective preservation.

Antimicrobial and Antioxidant Effects of Kappa-Carrageenan Coatings Enriched with Cinnamon Essential Oil in Pork Meat

Fresh pork is susceptible to microbial contamination and lipid oxidation, which leads to food safety and quality issues. This study aimed to develop a kappa-carrageenan (KC) coating embedded with cinnamon essential oil (CEO) for antimicrobial and antioxidant purposes in pork meat. The uncoated controls and coated samples were subjected to microbial (total viable count, lactic acid bacteria, and H2S-producing bacteria), chemical (DPPH and pH), and physical (surface color) analyses during refrigerated storage at 4 °C for 7 days. It was observed that KC coatings exhibited a better preservation effect on pork meat after the addition of CEO. The KC−CEO coatings were effective in retarding the growth of total viable count, lactic acid bacteria, and H2S-producing bacteria. In a DPPH test, the level of lipid oxidation in pork meat was also significantly (p < 0.05) reduced by the KC−CEO coatings. Furthermore, these coatings displayed pronounced activity in inhibiting the adverse alterations of pH value and surface color. Practically, KC−CEO-coated samples still exhibited an attractive bright red color at the end of refrigerated storage. Taken together, the developed KC−CEO coatings exerted pronounced antimicrobial and antioxidant activities in pork, thus providing a potential approach to preserving perishable meat.

Recent advances in carrageenan-based films for food packaging applications

In order to solve the increasingly serious environmental problems caused by plastic-based packaging, carrageenan-based films are drawing much attentions in food packaging applications, due to low cost, biodegradability, compatibility, and film-forming property. The purpose of this article is to present a comprehensive review of recent developments in carrageenan-based films, including fabrication strategies, physical and chemical properties and novel food packaging applications. Carrageenan can be extracted from red algae mainly by hydrolysis, ultrasonic-assisted and microwave-assisted extraction, and the combination of multiple extraction methods will be future trends in carrageenan extraction methods. Carrageenan can form homogeneous film-forming solutions and fabricate films mainly by direct coating, solvent casting and electrospinning, and mechanism of film formation was discussed in detail. Due to the inherent limitations of the pure carrageenan film, physical and chemical properties of carrageenan films were enhanced by incorporation with other compounds. Therefore, carrageenan-based films can be widely used for extending the shelf life of food and monitoring the food freshness by inhibiting microbial growth, reducing moisture loss and the respiration, etc. This article will provide useful guidelines for further research on carrageenan-based films.

Evaluating the Efficacy of Gum Arabic-Zinc Oxide Nanoparticles Composite Coating on Shelf-Life Extension of Mandarins (cv. Kinnow)

Restricted postharvest application of synthetic fungicides in maintaining the quality of citrus fruits has led to a search for alternative postharvest treatments. This study evaluated the efficacy of gum arabic (GA) enriched with green synthesized zinc oxide nanoparticles (ZnO-NPs) in maintaining the postharvest quality of mandarin (cv. Kinnow). ZnO-NPs were synthesized using Bidens pilosa leaf extract and incorporated into GA (2% w/v) at 0, 0.25, 0.5, and 1% to form composite coatings: GA, GA + ZnO-NP 0.25%, GA + ZnO-NP 0.5% and GA + ZnO-NP 1%, respectively. Fruit were dipped for 3 min in the respective coatings, with untreated fruit used as control. Fruit were air-dried, packed in commercial cartons, and stored at 5 ± 1°C and 90 ± 5% relative humidity (RH) for 40 days and observed at 10 days intervals, plus 5 days at 20 ± 5°C and 65 ± 5% RH to determine the incidence of physiological disorders. GA + ZnO-NP showed promise as an alternative postharvest treatment for controlling postharvest physiological disorders associated with 'Kinnow' mandarin. For instance, GA + ZnO-NP 0.5% markedly minimized weight loss (9.2%), electrolyte leakage (43.8%) and chilling injury incidence (5.4%) compared to control (weight loss; 33.3%, electrolyte leakage; 90.3% and chilling injury incidence; 41.5%) at the end of the storage. GA + ZnO-NP 1% significantly alleviated rind pitting, with 13.2% incidence compared to 45.2% rind pitting incidence in the control fruit. This was due to significantly higher phytochemical and antioxidant capacity and reduced antioxidant enzyme degradation in coated fruit than in control. In conclusion, gum arabic coating enriched with ZnO-NPs at concentrations between 0.5 and 1% is recommended as a viable option to maintain the quality of 'Kinnow' mandarin fruit during cold storage.

Nanotechnology-enhanced edible coating application on climacteric fruits

Climacteric fruits continue to ripen after harvest and produce ethylene, coupled with an increase in respiration rate, which contributes to more rapid perishability. Inhibition of ethylene biosynthesis has been shown to be an efficient way to delay the onset of ripening and lengthen shelf life. The use of edible materials as coatings presents an efficient approach in preserving the quality of fruits. Edible coatings have many benefits, such as affordability, ease of application, and use of natural ingredients. Nanotechnology provides interesting approaches to the management of fruit shelf life after harvest. Nanotechnology has the capacity of producing new materials by minimizing the size of components to a nanometric level. These kinds of nanomaterials possess distinct and improved properties for delaying fruit ripening and decay. The main goal of adding nanoparticles to edible coatings is to enhance the biopolymer's mechanical and water vapor barrier properties. Nanoparticles also contain biopolymer-like features and are thought to have superior antibacterial, antifungal, and antiviral properties than edible coatings. This review is aimed at summarizing recent findings on the application of edible coatings in the form of nanoparticles, and their effect on quality parameters and shelf life extension of climacteric fruits. Peer-reviewed articles were obtained by using Scopus and science direct. The current materials widely used for coating climacteric fruits are zinc, silver and chitosan nanoparticles. Zinc nanoparticles have been shown to be more effective in delaying ripening significantly by reducing weight and moisture loss and ensuring retention of fruit firmness. Further research is needed to understand their effect on other physicochemical properties of fruits.

Development of alginate-based edible coatings of optimized UV-barrier properties by response surface methodology for food packaging applications

Despite the outstanding characteristics of alginate, it suffers from bad UV-barrier, water barrier, and antimicrobial properties limiting its wide usage in food packaging. For this concern, Box-Behnken design (BBD) was applied to prepare an alginate-based edible coating of the best optimized UV-shielding properties upon the incorporation of both Aloe vera (AV) and zinc oxide nanoparticles (ZnO-NPs). The optimized minimum UV-transmittance was 4.96% when the optimized compositions of alginate (1.05 g), AV (2.95 g), and ZnO-NPs (4.93 wt%) were used. FTIR was used to verify the successful edible coating preparation while the wide-angle X-ray diffraction (XRD) was used to identify the interactions between the film's components. The incorporation of both AV and ZnO-NPs significantly improved alginate's thermal, water vapor permeability (WVP), mechanical and antimicrobial properties. In addition, the films incorporated with both AV and ZnO-NPs exhibited excellent UV-barrier properties compared with neat alginate. The optimized alginate film incorporated with both ZnO-NPs and AV significantly extended the shelf-life of tomato fruits up to 16 days without any defects. Due to the outstanding physical, UV-shielding, and antimicrobial properties of the optimized alginate/AV/ZnO-NPs film, it could be used potentially in food packaging industries.

Recent development in antibacterial activity and application of nanozymes in food preservation

Nanozymes with excellent broad-spectrum antibacterial properties offers an alternative strategy for food preservation. This review comprehensively summarized the antibacterial mechanisms of nanozymes, including the generation of reactive oxygen species (ROS) and the destruction of biofilms. Besides, the primary factors (size, morphology, hybridization, light, etc.) regulating the antibacterial activity of different types of nanozymes were highlighted in detail, which provided effective guidance on how to design highly efficient antibacterial nanozymes. Moreover, this review presented elaborated viewpoints on the unique applications of nanozymes in food preservation, including the selection of nanozymes loading matrix, fabrication techniques of nanozymes-based antibacterial films/coatings, and the recent advances in the application of nanozymes-based antibacterial films/coatings in food preservation. In the end, the safety issues of nanozymes have also been mentioned. Overall, this review provided new avenues in the field of food preservation and displayed great prospects.

Application of chitosan-ZnO nanoparticle edible coating to wild-simulated Korean ginseng root

Chitosan-ZnO nanoparticle (ZnONP) edible coating was applied to extend shelf life of wild-simulated Korean ginseng root (WsKG). In antimicrobial testing of various coating solutions (0.01, 0.02, 0.03% ZnONP), Bacillus cereus (Gram-positive) and Escherichia coli (Gram-negative) were most inhibited by the 0.03% chitosan-ZnONP solution. The 0.03% chitosan-ZnONP solution was finally used for edible coating of WsKG. In SEM analysis, the coat of chitosan and ZnONP was well-formed on the surface of WsKG. In isothermal storage tests (temperature: 5–20 °C, RH: 95%), microbial limit (4.70 log CFU/g) of total aerobic bacteria for non-coated and coated WsKG were reached at 3.9 and 6.3 weeks at 5 °C, 1.9 and 4.3 weeks at 10 °C, and 1.3 and 2.0 weeks at 20 °C, respectively. Mold occurred in the non-coated sample at 4 weeks at 5 °C, but not in the coated sample during 6 weeks. Chitosan-ZnONP edible coating was very effective in preserving WsKG.

Improvement of the Performance of Chitosan-Aloe vera Coatings by Adding Beeswax on Postharvest Quality of Mango Fruit

The effect of the application of chitosan–Aloe vera coatings emulsified with beeswax (0, 0.5, 1, 1.5 and 2%) during storage of Mangifera indica L. (cv Anwar Ratol) was investigated. Particle size of emulsions was reduced significantly with an increase in beeswax concentration. Water vapor permeability of the coatings was reduced by 43.7% with an increase in concentration of beeswax to 2%. The coated mangoes (at all concentrations of beeswax) exhibited reduced weight loss, delayed firmness loss, minimized pH change, maintained the total soluble solid contents, and retained free radical scavenging activity and total phenolic contents when stored at 18 °C and 75 ± 5% R.H. The best results were produced with a formulation containing 2.0% beeswax. Antimicrobial properties of chitosan and Aloe vera coatings were also improved with an increase in beeswax concentration and remarkably reduced the disease incidence in mangoes. In conclusion, beeswax-emulsified chitosan–Aloe vera coatings can be effectively used to increase the shelf life and marketable period of mangoes.

Preparation and Characterization of κ-Carrageenan Modified with Maleic Anhydride and Its Application in Films

In this work, the physicochemical properties of maleic anhydride (MAH)-modified κ-carrageenan (κCar) (MC) were characterized and compared with those of native κ-carrageenan (NC). The Fourier transform infrared spectrum of MC exhibited that κCar was successfully modified. Thermogravimetric analysis indicated that the thermal stability of MC was decreased. When the degree of substitution was 0.032, MC exhibited a low gel strength (759 g/cm²), gelling temperature (33.3 °C), and dehydration rate (60.3%). Given the excellent film-forming ability of κCar, MC films were then prepared and were found to have better mechanical and barrier properties (UV and water) than NC films. With regard to optical properties, MC films could completely absorb UV light in the range of 200–236 nm. The water contact angle of MC films was higher than that of NC films. Moreover, the elongation at break increased from 26.9% to 163%. These physicochemical property changes imply that MC can be employed in polysaccharide-based films.

Polysaccharide-Based Packaging Functionalized with Inorganic Nanoparticles for Food Preservation

Functionalization of polysaccharide-based packaging incorporating inorganic nanoparticles for food preservation is an active research area. This review summarizes the use of polysaccharide-based materials functionalized with inorganic nanoparticles (TiO2, ZnO, Ag, SiO2, Al2O3, Fe2O3, Zr, MgO, halloysite, and montmorillonite) to develop hybrid packaging for fruit, vegetables, meat (lamb, minced, pork, and poultry), mushrooms, cheese, eggs, and Ginkgo biloba seeds preservation. Their effects on quality parameters and shelf life are also discussed. In general, treated fruit, vegetables, mushrooms, and G. biloba seeds markedly increased their shelf life without significant changes in their sensory attributes, associated with a slowdown effect in the ripening process (respiration rate) due to the excellent gas exchange and barrier properties that effectively prevented dehydration, weight loss, enzymatic browning, microbial infections by spoilage and foodborne pathogenic bacteria, and mildew apparition in comparison with uncoated or polysaccharide-coated samples. Similarly, hybrid packaging showed protective effects to preserve meat products, cheese, and eggs by preventing microbial infections and lipid peroxidation, extending the food product’s shelf life without changes in their sensory attributes. According to the evidence, polysaccharide-hybrid packaging can preserve the quality parameters of different food products. However, further studies are needed to guarantee the safe implementation of these organic–inorganic packaging materials in the food industry.

Application of bio-nanocomposite films and edible coatings for extending the shelf life of fresh fruits and vegetables

New packaging materials are an emerging field in the food industry. Poor thermal, mechanical, chemical, and physical properties of biopolymers, and also their inherent permeability to gases and vapor have increased this interest. Biopolymeric materials (matrix) require fillers, which can react/interact with available matrix in order to provide new formulations with improved properties. Many studies have shown the potential use of metal nanoparticles in biopolymeric packaging and edible coatings for improving their properties. The current review summarizes the characterization of bio-nanocomposite films and edible coatings incorporated with metal nanoparticles on the shelf life and quality of tropical fruits, berries, climacteric/non-climacteric fruits and vegetables. It also provides a brief description of some advantages of bio-nanocomposite films and edible coatings applied to fruits and vegetables such as decreasing the color changes, respiration rate, weight loss and extended shelf life, delaying ripening and being environmentally friendly. The results of recent reports provide a better understanding of the impact of metal nanoparticles incorporated in biopolymers on the shelf life and the quality of fruits and vegetables.

Novel edible coating based on shellac and tannic acid for prolonging postharvest shelf life and improving overall quality of mango

This study aimed to investigate the combined effects of a coating based on shellac and the active agent tannic acid (TA) on the storability and physiological variations of mangoes stored at room temperature. Results showed that TA-shellac prolonged shelf life and improved overall quality of mangoes to a higher extent compared with controls, which was reflected in the extension of shelf life for approximately 10 days, maintaining of tissue firmness and weight loss, slowing down of respiration rate, improvement of physical properties and chemical qualities, suppression of browning, reduction of lipid peroxidation, preservation of aromatic volatiles, and regulation of the related enzymes activities. Addition of TA to shellac coating also improved the antifungal effect of the formulation. The results suggest that a synergistic effect took place between TA and shellac, which demonstrates the high potential for shelf life extension and quality improvement of mangoes of this formulation.

Effect of Kelulut Honey Nanoparticles Coating on the Changes of Respiration Rate, Ascorbic Acid, and Total Phenolic Content of Papaya (Carica papaya L.) during Cold Storage

This study evaluated the respiration rate of coated and uncoated (control) papayas (Carica papaya L.) with 15% of Kelulut honey (KH) nanoparticles (Nps) coating solution during cold storage at 12 ± 1 °C for 21 days. The respiration rate of the papayas significantly changed during storage, with an increase in CO₂ and a decrease in O₂ and C₂H₄, while the ascorbic acid and total phenolic content was maintained. The changes in respiration rate were rather slower for coated papayas when compared to control ones. A kinetic model was established from the experimental data to describe the changes of O₂, CO₂, and C₂H₄ production in papayas throughout the storage period. All O₂, CO₂, and C₂H₄ were experimentally retrieved from a closed system method and then represented by the Peleg model. The outcomes indicated the Peleg constant K₁ and K₂, which were gained from linear regression analysis and coefficients of determination (R²), seemed to fit well with the experimental data, whereby the R² values exceeded 0.85 for both coated and control papayas. The model confirmed both the capability and predictability aspects of the respiration rate displayed by papayas coated with KH Nps throughout the cold storage period. This is supported by the differences in the stomatal aperture of coated and control papaya shown by microstructural images.

Edible films and coatings for shelf life extension of mango: a review

Edible films and coatings are eco-friendly promising materials for preserving the quality and extending the shelf life of fresh and minimally-processed fruits. They can form protective layers around fruits, regulate their respiration rates, and protect them from loss of water, tissue softening, browning, and microbial contamination. Edible films and coatings have many advantages over other post-harvest treatments. They can add commercial value to fruits by enhancing their appearance, and act as carriers of functional ingredients, such as antioxidants, antimicrobial agents and nutraceuticals. Mango, a highly perishable tropical fruit, has a short post-harvest life, which limits transport to distant markets. Application of edible films and coatings on mango fruits is an effective method to preserve their quality and safety. This paper provides an overview of desirable properties for films and coatings, and recent development in different edible coatings for both fresh and minimally-processed mango. The most popular edible coating materials, such as chitosan, waxes, starch, gums, and cellulose used for mango are reviewed. The commercialization of coating formulations and equipment used for application of coatings are discussed. The environmental impacts, safety aspects, and the challenges encountered are outlined. The opportunities to use other coating materials, such as aloe-vera gel, microbial polysaccharides, and photosynthetic microorganisms are also examined.

A Review of Polysaccharide-Zinc Oxide Nanocomposites as Safe Coating for Fruits Preservation

Safe coating formulated from biopolymer can be an alternative for better packaging for fruits. Among biopolymers used for safe coating, polysaccharides attracted more attention due to its biocompatibility and edibility. However, polysaccharide-based materials have weaknesses such as low water barrier and mechanical properties which result in lower capability on preserving the coated fruits. Hence, the incorporation of nanoparticles (NPs) such as zinc oxide (ZnO) is expected to increase the ability of polysaccharide-based coating for the enhancement of fruit shelf life. In this review paper, the basic information and the latest updates on the incorporation of ZnO NPs into the polysaccharide-based safe coating for fruit are presented. Various research has investigated polysaccharide-ZnO nanocomposite safe coating to prolong the shelf life of fruits. The polysaccharides used include chitosan, alginate, carrageenan, cellulose, and pectin. Overall, polysaccharide-ZnO nanocomposites can improve the shelf life of fruits by reducing weight loss, maintaining firmness, reducing the ripening process, reducing respiration, reducing the oxidation process, and inhibiting microbial growth. Finally, the challenges and potential of ZnO NPs as an active agent in the safe coating application are also discussed.

Effects of Different TiO2 Nanoparticles Concentrations on the Physical and Antibacterial Activities of Chitosan-Based Coating Film

In this investigation, the effect of different concentrations of titanium dioxide (TiO₂) nanoparticles (NPs) on the structure and antimicrobial activity of chitosan-based coating films was examined. Analysis using scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed that the modified TiO₂ NPs were successfully dispersed into the chitosan matrix, and that the roughness of the chitosan-TiO₂ nanocomposites were significantly reduced. Moreover, X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analyses indicated that the chitosan interacted with TiO₂ NPs and possessed good compatibility, while a thermogravimetric analysis (TGA) of the thermal properties showed that the chitosan-TiO₂ nanocomposites with 0.05% TiO₂ NPs concentration had the best thermal stability. The chitosan-TiO₂ nanocomposite exhibited an inhibitory effect on the growth of Escherichia coli and Staphylococcus aureus. This antimicrobial activity of the chitosan-TiO₂ nanocomposites had an inhibition zone ranging from 9.86 ± 0.90 to 13.55 ± 0.35 (mm). These results, therefore, indicate that chitosan-based coating films incorporated with TiO₂ NPs might become a potential packaging system for prolonging the shelf-life of fruits and vegetables.

Antimicrobial Nanoparticles Incorporated in Edible Coatings and Films for the Preservation of Fruits and Vegetables

Edible coatings and films (ECF) are employed as matrixes for incorporating antimicrobial nanoparticles (NPs), and then they are applied on the fruits and vegetables to prolong shelf life and enhance storage quality. This paper provides a comprehensive review on the preparation, antimicrobial properties and mechanisms, surface and physical qualities of ECF containing antimicrobial NPs, and its efficient application to vegetables and fruits as well. Following an introduction on the properties of the main edible coating materials, the preparation technologies of ECF with NPs are summarized. The antimicrobial activity of ECF with NPs against the tested microorganism was observed by many researchers. This might be mainly due to the electrostatic interaction between the cationic polymer or free metal ions and the charged cell membrane, the photocatalytic reaction of NPs, the detachment of free metal ion, and partly due to the antimicrobial activity of edible materials. Moreover, their physical, mechanical and releasing properties are discussed in detail, which might be influenced by the concentration of NPs. The preservation potential on the quality of fruits and vegetables indicates that various ECF with NPs might be used as the ideal materials for food application. Following the introduction on these characteristics, an attempt is made to predict future trends in this field.

Bio-Based Polymers with Antimicrobial Properties towards Sustainable Development

This article concisely reviews the most recent contributions to the development of sustainable bio-based polymers with antimicrobial properties. This is because some of the main problems that humanity faces, nowadays and in the future, are climate change and bacterial multi-resistance. Therefore, scientists are trying to provide solutions to these problems. In an attempt to organize these antimicrobial sustainable materials, we have classified them into the main families; i.e., polysaccharides, proteins/polypeptides, polyesters, and polyurethanes. The review then summarizes the most recent antimicrobial aspects of these sustainable materials with antimicrobial performance considering their main potential applications in the biomedical field and in the food industry. Furthermore, their use in other fields, such as water purification and coating technology, is also described. Finally, some concluding remarks will point out the promise of this theme.