Characterization of edible films from whey proteins treated with heat, ultrasounds and/or transglutaminase. Application in cheese slices packaging

Sheep's Second Cheese Whey Edible Coatings with Oregano and Clary Sage Essential Oils Used as Sustainable Packaging Material in Cheese

Sheep's second cheese whey (SCW), the by-product resulting from whey cheese production, was used as a component of cheese coatings containing oregano (Origanum compactum) and clary sage (Salvia sclarea) essential oils (EOs). SCW powder was obtained by the ultrafiltration/diafiltration of SCW followed by reverse osmosis and freeze drying. The coatings were produced with a mixture of SCW and whey protein isolate (WPI) using glycerol as plasticizer. Model cheeses were produced with cow´s milk and those containing SCW:WPI coatings; those with and without EOs were compared to controls without coating and with a commercial coating containing natamycin. At the end of ripening (28 days), the cheeses containing EOs presented higher water activity (ca. 0.930) and moisture content, as well as lower titratable acidity. Concerning color parameters, significant differences were also observed between products and as a result of ripening time. However, the use of SCW:WPI coatings did not significantly influence the color parameters at the end of ripening. Regarding texture parameters, the cheeses containing SCW:WPI coatings presented significantly lower values for hardness, chewiness, and gumminess. Significant differences were also observed for all microbial groups evaluated either between products and as a result of ripening time. In all cases, lactobacilli and lactococci counts surpassed log 7-8 CFU/g, while the counts of yeasts and molds increased steadily from ca. log 3 to log 6 CFU/g. The lowest counts of yeasts and molds were observed in the samples containing natamycin, but nonsignificant differences between products were observed. In conclusion, SCW:WPI cheese coatings can successfully substitute commercial coatings with the advantage of being edible packaging materials manufactured with by-products.

Production and characterization of human hair keratin bioplastic films with novel plasticizers

Since their invention, conventional plastics have contributed in the betterment of the society in numerous ways, nevertheless their deleterious impacts on the natural ecosystems and living creatures is irrefutable. The management of plastic waste generated is a concern worldwide and therefore quest for the plastic alternates or bioplastics is imminent. Here, we explore the suitability of keratin from human hair waste as the candidate for the production of bioplastic films. Keratin extracted from hair was used to form the films or 'kertics' by solution casting and curing. Ethanediol, di-ethylene glycol and tri-ethylene glycol were used as novel plasticizers along with glycerol in the keratin film formation. The film prepared were of the thickness 190-220 µm with the area of about 4.54 ± 0.2 cm2. Water uptake by G100, ED100, DEG100 and TEG100 films was recorded to be 4.8, 6.2, 4.9 and 6.3% respectively. FESEM analysis revealed that the films with 100 µl of 1% glycerol (G100) had continuous surface morphology except few pits of 0.1 µm, also DEG100 and TEG100 films have the most uniform surface morphology with no evident pits, holes or bulges. X-ray diffractogram showed characteristic peak of keratin at 19.5° and the d-spacing value observed was 0.45 nm. The FTIR studies suggested that the films retained keratin in non degraded form, and possessed the characteristic Amide peaks. The films were also found to be biodegradable in studies involving keratinophilic fungal strain of A. oryzae. These films could found potential applications in packaging industry, disposable items manufacturing and biomaterial generation.

Advances in transglutaminase cross-linked protein-based food packaging films; a review

Pushed by the environmental pollution and health hazards of plastic packaging, the development of biodegradable food packaging films (FPFs) is a necessary and sustainable trend for social development. Most protein molecules have excellent film-forming properties as natural polymer matrices, and the assembled films have excellent barrier properties, but show defects such as low water resistance and poor mechanical properties. In order to improve the performance of protein-based films, transglutaminase (TG) is used as a safe and green cross-linking (CL) agent. This work covers recent developments on TG cross-linked protein-based FPFs, mainly comprising proteins of animal and plant origin, including gelatin, whey protein, zein, soy proteins, bitter vetch protein, etc. The chemical properties and reaction mechanism of TG are briefly introduced, focusing on the effects of TG CL on the physicochemical properties of different protein-based FPFs, including barrier properties, water resistance, mechanical properties and thermal stability. It is concluded that the addition of TG can significantly improve the physical and mechanical properties of protein-based films, mainly improving their water resistance, barrier, mechanical and thermal properties. It is worth noting that the effect of TG on the properties of protein-based films is not only related to the concentration of TG added, but also related to CL temperature and other factors. Moreover, TG can also be used in combination with other strategies to improve the properties of protein-based films.

Research Advances in Plant Protein-Based Products: Protein Sources, Processing Technology, and Food Applications

Plant proteins are high-quality dietary components of food products. With the growing interest in sustainable and healthy food alternatives, plant proteins have gained significant attention as viable substitutes for animal-based proteins. Understanding the diversity of protein sources derived from plants, novel processing technology, and multiple applications is crucial for developing nutritious and sustainable plant protein-based products. This Review summarizes the natural sources of traditional and emerging plant proteins. The classifications, processing technologies, and applications of plant protein-based products in the food industry are explicitly elucidated. Moreover, the advantages and disadvantages of plant protein-based food products are revealed. Strategies such as protein fortification and complementation to overcome these shortcomings are critically discussed. We also demonstrate several issues that need to be addressed in future development.

Effect of high-intensity ultrasonic time on structural, mechanical, and physicochemical properties of β-conglycinin (7S)- Transglutaminase (TGase) composite edible films

The β-conglycinin (7S) was pre-treated with high-intensity ultrasonic (HIU) and subsequently formed into composite edible films with the transglutaminase (TGase) method. Effects of HIU pretreatment time (0, 5, 10, 15, and 20 min) on the conformation of 7S and structural and application properties of 7S-TGase films were evaluated. The analysis of 7S conformation results revealed that HIU pretreatment for 0-10 min significantly dissociated the 7S, exposed internal hydrophobic groups of protein, increased its intermolecular hydrogen bonds, and altered the protein secondary and tertiary structure. The structural properties of films were evaluated by SEM, XRD, and ATR-FTIR. SEM showed that HIU reduced film wrinkles and cracks and improved unevenness. XRD and ATR-FTIR indicated that the film obtained an enlarged crystallinity, and the amide I and amide II regions of films were peak-shifted which is usually associated with the formation of covalent bonds. Notably, analysis of intermolecular force showed that HIU facilitated the formation of hydrogen bonds, hydrophobic interactions, and ε-(γ-glutamyl) lysine bonds in 7S-TGase films. The above structural changes in 7S and films were beneficial for the application properties of films. Results indicated that 10 min HIU pretreatment effectively improved the mechanical properties and water resistance, reduced water vapor permeability and oxygen permeability, and decreased the opacity of 7S-TGase films. However, the color of the film was not affected by the HIU, with an overall bright and yellowish color.

A Review of the Mechanism, Properties, and Applications of Hydrogels Prepared by Enzymatic Cross-linking

Hydrogels, as biological materials, are widely used in food, tissue engineering, and biomedical applications. Nevertheless, many issues remain in the preparation of hydrogels by physical and chemical methods, such as low bioaffinity, weak mechanical properties, and unstable structures, which also limit their applications in other fields. However, the enzymatic cross-linking method has the advantages of high catalytic efficiency, mild reaction conditions, and the presence of nontoxic substances. In this review, we evaluated the chemical, physical, and biological methods of preparing hydrogels and introduced three common cross-linking enzymes and their principles for preparing hydrogels. This review introduced the applications and properties of hydrogels prepared by the enzymatic method and also provided some suggestions regarding the current situation and future development of hydrogels prepared by enzymatic cross-linking.

Whey-based polymeric films for food packaging applications: a review of recent trends

The food industry is always looking for new strategies to extend the shelf life of food. In recent years, the focus has been on edible films and coatings. These play an essential role in the quality, safety, transport, storage, and display of a wide variety of fresh and processed foods and contribute to environmental sustainability. In this sense, this study aimed to carry out a bibliometric analysis and literature review on the production of whey-based films for application in food packaging. Whey-based films have different characteristics when compared to other biopolymers, such as antimicrobial and immunomodulatory capacity. A wide variety of compounds were found that can be incorporated into whey films, aiming to overcome their limitations related to high solubility and low mechanical properties. These compounds range from plasticizing agents, secondary biomacromolecules added to balance the polymer matrix (gelatin, starch, chitosan), and bioactive agents (essential oils, pigments extracted from plants, and other antimicrobial agents). The most cited foods as application matrix were meat (fish, chicken, ham, and beef), in addition to different types of cheese. Edible and biodegradable films have the potential to replace synthetic polymers, combining social, environmental, and economic aspects. The biggest challenge on a large scale is the stability of physical, chemical, and biological properties during application. © 2022 Society of Chemical Industry.

Gelatin/carboxymethyl cellulose edible films: modification of physical properties by different hydrocolloids and application in beef preservation in combination with shallot waste powder

In this work, a gelatin/carboxymethyl cellulose (CMC) base formulation was first modified by using different hydrocolloids like oxidized starch (1404), hydroxypropyl starch (1440), locust bean gum, xanthan gum, and guar gum. The properties of modified films were characterized using SEM, FT-IR, XRD and TGA-DSC before selecting of best-modified film for further development with shallot waste powder. SEM images showed that the rough or heterogeneous surface of the base was changed to more even and smooth depending on the hydrocolloids used while FTIR results demonstrated that a new NCO functional group non-existent in the base formulation was found for most of the modified films, implying that the modification led to the formation of this functional group. Compared to other hydrocolloids, the addition of guar gum into the gelatin/CMC base has improved its properties such as better color appearance, higher stability, and less weight loss during thermal degradation, and had minimal effect on the structure of resulting films. Subsequently, the incorporation of spray-dried shallot peel powder into gelatin/CMC/guar gum was conducted to investigate the applicability of edible films in the preservation of raw beef. Antibacterial activity assays revealed that the films can inhibit and kill both Gram-positive and Gram-negative bacteria as well as fungi. It is noteworthy that the addition of 0.5% shallot powder not only effectively decelerated the microbial growth but also destroyed E. coli during 11 days of storage (2.8 log CFU g-1) and the bacterial count was even lower than that of uncoated raw beef on day 0 (3.3 log CFU g-1).

Strategies for Exploiting Milk Protein Properties in Making Films and Coatings for Food Packaging: A Review

Biopolymers of different natures (carbohydrates, proteins, etc.) recovered from by-products of industrial processes are increasingly being studied to obtain biomaterials as alternatives to conventional plastics, thus contributing to the implementation of a circular economy. The food industry generates huge amounts of by-products and waste, including unsold food products that reach the end of their shelf life and are no longer usable in the food chain. Milk proteins can be easily separated from dairy waste and adapted into effective bio-based polymeric materials. Firstly, this review describes the relevant properties of milk proteins and the approaches to modifying them for subsequent use. Then, we provide an overview of recent studies on the development of films and coatings based on milk proteins and, where available, their applications in food packaging. Comparisons among published studies were made based on the formulation as well as production conditions and technologies. The role of different additives and modifiers tested for the performances of films and coatings, such as water vapor permeability, tensile strength, and elongation at break, were reviewed. This review also outlines the limitations of milk-protein-based materials, such as moisture sensitivity and brittleness. Overall, milk proteins hold great potential as a sustainable alternative to petroleum-based polymers. However, their use in food packaging materials at an industrial level remains problematic.

Mechanical, Barrier and Thermal Properties of Amylose-Argan Proteins-Based Bioplastics in the Presence of Transglutaminase

The bioeconomy aims to discover new sources for producing energy and materials and to valorize byproducts that otherwise would get wasted. In this work, we investigate the possibility of producing novel bioplastics, made up of argan seed proteins (APs), extracted from argan oilcake, and amylose (AM), obtained from barley plants through an RNA interference technique. Argan, Argania spinosa, is a plant widespread in arid regions of Northern Africa, where it plays a fundamental socio-ecological role. Argan seeds are used to obtain a biologically active and edible oil, producing a byproduct, the oilcake, that is rich in proteins, fibers, and fats, and is generally used as animal food. Recently, argan oilcakes have been attracting attention as a waste to be recovered to obtain high-added-value products. Here, APs were chosen to test the performance of blended bioplastics with AM, because they have the potential to improve the properties of the final product. High-AM-starches present attractive features for use as bioplastics, including a higher gel-forming capacity, a higher thermal stability, and reduced swelling compared to normal starch. It has already been demonstrated that pure AM-based films provide more suitable properties than normal starch-based films. Here, we report on the performance of these novel blended bioplastics in terms of their mechanical, barrier, and thermal properties; and the effect of the enzyme microbial transglutaminase (mTGase) as a reticulating agent for AP's components was also studied. These results contribute to the development of novel sustainable bioplastics with improved properties and confirm the possibility of valorizing the byproduct, APs, using them as a new raw material.

Hyaluronic acid-rich burger separator edible disc prepared from slaughterhouse waste

In this study, the edible films from chicken feet (CF), ovine muscle fascia (MF), and bovine bone gelatin (Gel) were prepared and their characteristics were analyzed, and we also evaluated the sensory quality of raw and cooked hamburgers using the edible films. The quantities of the CF and MF hyaluronic acid were evaluated using colorimetry and spectrophotometry. The CF, MF, and Gel films were prepared by solvent casting method. Results indicated that the concentration of hyaluronic acid in CF (124.11 ppm) was greater than MF (101.11 ppm). The antioxidative property of the CF film (18.47%) was greater than the Gel (1.88%) and MF (Undetectable) film. The CF film was more resistant to water vapor permeability (2.75 × 10-9 g/m.s.pa) than the MF (1.57 × 10-8 g/m.s.pa) and Gel (1.5 × 10-7 g/m.s.pa) films. The Gel film had more appropriate mechanical properties than CF and MF films. The films kept burgers patties independent from one another and prevented them from sticking and freezing together. MF and CF films were able to promote the organoleptic properties of raw and cooked hamburgers in taste and texture.

Development of soy-based nanocomposite film: Modeling for barrier and mechanical properties and its application as cheese slice separator

In the current study, soybean aqueous extract (SAE)-based nanocomposite film was developed by incorporating cellulose nanofiber (CNF) at various concentrations (0-10%). Effect of nanoreinforcement on essential properties of the nanocomposite film such as barrier, mechanical, water affinity, and optical properties were evaluated. Homogeneous films with improved barrier and mechanical properties were observed until 6% CNF, beyond which considerable reduction in desirable properties was noticed due to nanoparticle's agglomeration effect. Furthermore, the prediction of the mechanical and barrier properties of nanocomposite film was performed with mathematical models such as modified Halpin-Tsai and modified Nielsen equations, respectively. The model-fitting results reveal that the theoretically predicted values were in close agreement with the experimental values. Hence, these models were well suited for predicting respective properties. Model prediction also implies that the increase in the aspect ratio of fillers can considerably cause a reduction in water vapor permeability and improvement in mechanical properties. Suitability of developed film as cheese slice separator was evaluated: they had equivalent outcomes in terms of easiness in slice separation and wholeness of slices after separation compared to the commercial material.

Edible hyaluronic acid-rich burger separator discs prepared from slaughterhouse waste

In this study, edible films from chicken feet extract (CF), ovine muscle fascia extract (MF), and bovine bone gelatin powder (Gel) were prepared and their characteristics were analyzed. We also used the films as separators of burger cuts and evaluated the organoleptic characteristics of cooked burgers. Hyaluronic acid quantities of CF and MF were measured using colorimetric and spectrophotometry. Results indicated that the concentration of hyaluronic acid in CF (124.11 ppm) was greater than MF (101.11 ppm). The antioxidative property of the CF film (18.47%) was greater than the Gel (1.88%) and MF (Undetectable) films. The CF film was more resistant to water vapor permeability (2.75 × 10-9 g/m.s.pa) than the MF (1.57 × 10-8 g/m.s.pa) and Gel (1.5 × 10-7 g/m.s.pa) films. The Gel film had more appropriate mechanical properties than CF and MF films. The films kept burgers patties independent from one another and prevented them from sticking and freezing together. MF and CF films were able to promote the organoleptic properties of cooked burgers in taste and texture.

Sunflower Oilcake as a Potential Source for the Development of Edible Membranes

Sunflower oilcake flour (SFOC) resulting from the cold extraction of oil is a rich source of valuable bio-components that stimulated the development of novel, biodegradable and edible films. The films were prepared by incorporating different concentration of sunflower oilcakes (0.1-0.5 g). The obtained films were characterized in terms of physical, water-affinity, antimicrobial and morphological properties. The edible-film properties were affected significantly by the presence and the level of SFOC added. The water vapor permeability and water vapor transmission rate improved with the amount of SFOC added. However, the solubility, oxygen and grease barrier were slightly lower than control film. SEM analysis revealed a rougher but continuous structure with the increases in sunflower oilcake. Moreover, the films with different SFOC levels were opaque, thus presenting good protection against UV radiation. Overall, the SFOC can be use as raw material to produce edible films with suitable properties and microbiological stability for food-packaging applications.

Ultrasound-assisted preparation of chitosan/nano-silica aerogel/tea polyphenol biodegradable films: Physical and functional properties

In this study, chitosan(CS), nano-silicon aerogels(nSA) and tea polyphenols(TP) were used as film-forming materials and processed with ultrasonication to form films using the tape-casting method. The effects of ultrasonication time, temperature and frequency on the properties of CS/nSA/TP film were explored via material property testing. The results of response surface showed that the maximum tensile strength of the film was 4.036 MPa at ultrasonication time(57.97 min), temperature(37.26 °C) and frequency(30 kHz). The maximum elongation at break of the film was 279.42 % at ultrasonication time(60.88 min), temperature(39.93 °C) and frequency(30 kHz). Due to cavitation and super-mixing effects, ultrasonication may make the surface of the film smoother and easier to degrade. After ultrasonication, TPs were protected by the 3D network structure composed of CS and nSA. Ultrasonication improved the antioxidant and antibacterial properties of the film. These results show that ultrasonication is an effective method to improve the properties of films.

Mung bean protein films incorporated with cumin essential oil: development and characterization

Biodegradable films based on mung bean protein (1, 3 and 5%) incorporated with cumin essential oil (EO) (0, 0.25 and 0.5 ml/g protein) were developed. Adding cumin oil and increasing the protein content enhanced the thickness, tensile strength and yellowness. Films incorporated with EO exhibited less water vapor permeability and water solubility, as compared to the control films. A higher antioxidant activity was also obtained by increasing the EO and protein ratios. Films with higher levels of protein displayed lower thermal stability with a lower degradation temperature, as suggested by thermo-gravimetric analyses. In addition, the incorporation of EO reduced thermal stability, as confirmed by the higher weight loss and lower degradation temperature. Furthermore, mung bean protein films containing 0.5 ml cumin oil/g protein had suitable physical characteristics, antioxidant activities, water barrier properties and thermal stability; thus, they can be used as appropriate biodegradable packaging materials for food preservation.

Ultrasonication effects on physicochemical properties of biopolymer-based films: A comprehensive review

Biopolymeric films manufactured from materials such as starch, cellulose, protein, chitosan, gelatin, and polyvinyl alcohol are widely applied due to their complete biodegradability. While biopolymer-based films exhibit good gas barriers and optical properties when used in packaging, poor moisture resistance and mechanical properties limit their further application. Ultrasonication is a promising, effective technology for resolving these shortcomings, with its high efficiency, environmentally friendly nature, and safety. This review briefly introduces basic ultrasonication principles and their main effects on mechanical properties, transparency, color, microstructure, water vapor permeability, and oxygen resistance. We also describe the thermal performance of biopolymeric films. While ultrasonication has many positive effects on the physicochemical properties of biopolymeric films, many factors influence their behavior during film preparation, including power density, amplitude, treatment time, frequency, and the inherent properties of the source materials. This review focuses on biopolymers as film-forming materials and comprehensively discusses the promotional effects of ultrasonication on their physicochemical properties.

Effects of high-intensity ultrasound on the structural, optical, mechanical and physicochemical properties of pea protein isolate-based edible film

Pea protein is a promising alternative to animal-based protein and the interest in its application in food industry has been rapidly growing. In this study, pea protein isolates (PPI) were used to form protein-based edible films and the effect of ultrasound treatment on the structure of PPI and the structural, optical, mechanical and physicochemical properties of PPI-films were investigated. Ultrasound induced unfolding of PPI and exposed interior hydrophobic groups to protein surface while both PPI dissociation and formation of large aggregates were observed, as confirmed by measuring intrinsic emission fluorescence, surface hydrophobicity, surface charge, and particle size distribution and polydispersity index, respectively. FE-SEM showed that ultrasound decreased the cracks and protein aggregates at the surface of PPI-film. The film structure was also investigated by FTIR, which showed peak shift in amide I and II region and noticeable difference of protein secondary structure as affected by ultrasound. As a result of such structural changes caused by ultrasound, the properties of PPI-films were improved. Results showed that ultrasound greatly improved the film transparency, significantly increased film tensile strength but not elongation at break, and decreased moisture content and water vapor permeability of the film. This study provided structural data as evidence for utilizing ultrasound technique to develop PPI-films with improved optical, mechanical and water barrier properties.

Preparation and characterization of chitosan-based edible active films incorporated with Sargassum pallidum polysaccharides by ultrasound treatment

In this study, Sargassum pallidum polysaccharides (SPPs) were incorporated into chitosan (CH) to develop a novel edible active film (CH/SPPs-US) via ultrasonication. The mechanical, water vapor permeability, surface morphology, crystallinity, antioxidant, and fruit preservation properties of CH/SPPs-US films prepared under sequences of matrix ratios and ultrasound treatment were investigated. The results revealed that the addition of SPPs combined with ultrasonic treatment could significantly enhance the transparency, elongation and tensile strength of the films whereas the water vapor permeability was decreased. Tensile strength and elongation at break of the C2/SP1.2-US film were 12.07 N and 54.18%, respectively, which were significantly higher than those for CH film. Meanwhile, the water vapor permeability value of C2/SP1.2-US was reduced by as high as 40.2% compared with that of chitosan film. In addition, antioxidant effect evaluation showed that the CH-based films added with SPPs exhibited better antioxidant activity than CH film, and ultrasonic treatment could further strengthen the antioxidant activity of the film. The CH/SPPs-US films could effectively extend the shelf life and inhibit the deterioration of the strawberry at room temperature (25 ± 1 °C) and 70% ± 5% relative humidity for 7 days. These results indicated that the CH/SPPs edible films via ultrasonication could be developed as edible packaging films for the preservation of fresh fruits.

Potentials of polysaccharides, lipids and proteins in biodegradable food packaging applications

Bio-based packaging materials are gaining importance due to their biodegradability, sustainability and environmental friendliness. To control the food quality and improve the food safety standards, proteins polysaccharide and lipid-based packaging films are enriched with bioactive and functional substances. However, poor permeability and mechanical characteristics are the challenging areas in their commercialization. Scientists and researchers are using a combination of techniques i.e. hydrogels, crosslinking, etc. to improve the intermolecular forces between different components of the film formulation to counter these challenges More recently, biodegradable packaging materials, sometimes edible, are also used for the delivery of functional ingredients which reveals their potential for drug delivery to counter the nutrient deficiency problems. This study highlights the potentials of bio-based materials i.e. proteins, polysaccharides, lipids, etc. to develop biodegradable packaging materials. It also explores the additives used to improve the physicochemical and mechanical properties of biodegradable packaging materials. Furthermore, it highlights the novel trends in biodegradable packaging from a food safety and quality point of view.

Bioplastic films with unusually good oxygen barrier properties based on potato fruit-juice

In this study, the use of potato fruit juice (PFJ) to make plastic films is presented. PFJ is an interesting raw material as it is obtained as a by-product from the potato-starch industry. The films showed uniquely high oxygen barrier properties, and the PFJ material is therefore a potential replacement for the most commonly used, expensive and petroleum-based ethylene-vinyl alcohol copolymer (EVOH) as a barrier layer in future packaging. The films also exhibit good grease resistance. As expected for hydrophilic materials, they exhibited high water vapour transmission rate, which shows that they, as for EVOH, have to be laminated with hydrophobic polymers in food packaging. The films, having a glass transition temperature between -5 °C and 10 °C, showed elastic-plastic behaviour with stable crack growth.

Protein-Based Films and Coatings for Food Industry Applications

Food packaging is an area of interest not just for food producers or food marketing, but also for consumers who are more and more aware about the fact that food packaging has a great impact on food product quality and on the environment. The most used materials for the packaging of food are plastic, glass, metal, and paper. Still, over time edible films have become widely used for a variety of different products and different food categories such as meat products, vegetables, or dairy products. For example, proteins are excellent materials used for obtaining edible or non-edible coatings and films. The scope of this review is to overview the literature on protein utilization in food packages and edible packages, their functionalization, antioxidant, antimicrobial and antifungal activities, and economic perspectives. Different vegetable (corn, soy, mung bean, pea, grass pea, wild and Pasankalla quinoa, bitter vetch) and animal (whey, casein, keratin, collagen, gelatin, surimi, egg white) protein sources are discussed. Mechanical properties, thickness, moisture content, water vapor permeability, sensorial properties, and suitability for the environment also have a significant impact on protein-based packages utilization.

Evaluation of the properties of whey protein films with modifications

Whey protein concentrate (WPC) has been widely studied as a biodegradable bio-based packaging material in the food industry. In this study, different whey protein films were obtained through physical, chemical, enzymatic, and composite modifications. The molecular structure, micro-morphology, mechanical properties, barrier properties, and other characteristics of the films were evaluated. The results illustrated that the thickness of WPC with composite modification increased and the transmittance decreased, but the mechanical properties and barrier properties were more prominent. The WPC film prepared by physical modification combined with transglutaminase has the best film-forming effect, the tensile strength (TS) was 5.45 MPa, the elongation at break (EAB) was 25.19%, the WVP was 5.53 g·mm/m² ·hr·kPa, and the Oxygen permeability (OP) was 1.83 meq/K, and its microstructure was and uniform. In addition, based on the the results of SDS-PAGE and Fourier transform infrared spectroscopy (FTIR), the intermolecular and intramolecular interactions of various modification methods on WPC were studied, thus contributing to analyze the properties of the film. This study provides theoretical basis and technical support for the industrial production of protein-based films.

Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry

An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10⁻¹¹ g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs’ distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.

Thyme Antimicrobial Effect in Edible Films with High Pressure Thermally Treated Whey Protein Concentrate

Application of high pressure-thermal treatment (600 MPa and 70 °C, 20 min) for obtaining edible films functionalized with thyme extracts have been studied in order to evaluate the antimicrobial capacity of films structure to retain and release the bioactive compounds. The high pressure-thermally treated films (HPT) were compared with the thermally treated (TT) ones (80 ± 0.5 °C, 35 min). The film structures were analyzed and the sorption isotherms, water vapor permeability, antimicrobial activity and the volatile fingerprints by GC/MS were performed. The HPT film presented more binding sites for water chemi-sorption than TT films and displayed significantly lower WVP than TT films (p < 0.05). TT films displayed slightly, but significant higher, antimicrobial activity (p < 0.05) against Geotrichum candidum in the first day and against Bacillus subtilis in the 10th day of storage. The HPT film structure had ~1.5-fold higher capacity to retain volatiles after drying compared to TT films. From the HPT films higher amount of p-cymene and α-terpinene was volatilized during 10 days of storage at 25 °C, 50% RH while from the TT films higher amount of caryophyllene and carvacrol were released. During storage HPT films had a 2-fold lower capacity to retain monoterpenes compared to TT films.

Microbial Transglutaminase as a Tool to Improve the Features of Hydrocolloid-Based Bioplastics

Several proteins from animal and plant origin act as microbial transglutaminase substrate, a crosslinking enzyme capable of introducing isopeptide bonds into proteins between the aminoacids glutamines and lysines. This feature has been widely exploited to modify the biological properties of many proteins, such as emulsifying, gelling, viscosity, and foaming. Besides, microbial transglutaminase has been used to prepare bioplastics that, because made of renewable molecules, are able to replace the high polluting plastics of petrochemical origin. In fact, most of the time, it has been shown that the microbial enzyme strengthens the matrix of protein-based bioplastics, thus, influencing the technological characteristics of the derived materials. In this review, an overview of the ability of many proteins to behave as good substrates of the enzyme and their ability to give rise to bioplastics with improved properties is presented. Different applications of this enzyme confirm its important role as an additive to recover high value-added protein containing by-products with a double aim (i) to produce environmentally friendly materials and (ii) to find alternative uses of wastes as renewable, cheap, and non-polluting sources. Both principles are in line with the bio-economy paradigm.

Effect of high-intensity ultrasound treatment in combination with transglutaminase and nanoparticles on structural, mechanical, and physicochemical properties of quinoa proteins/chitosan edible films

The effect of high-intensity ultrasound (US) combined with transglutaminase treatment (TG) and the inclusion of nanoparticles (Np) on the structural, mechanical, barrier, and physicochemical properties of quinoa protein/chitosan composite edible films were evaluated. Structurally it was observed that the maximum temperatures of the thermal degradation increased with the use of combined US and TG treatment, generating films with superior thermal stability. FTIR results showed that in the amide zone I oscillations of the polypeptide structure were related to the stretching vibrations of CO in the US/TG-Np edible film. Which has generally been associated with changes in the structure and formation of covalent bonds by the action of TG. The US improved mechanical properties by increasing the tensile strength (with or without the application of TG). While combining US-TG produced a significant increase in thickness, decrease in elongation percentage, and increase in tensile strength. Which can be attributed to cross-linking produced by TG. Water vapour permeability increased in all cases. In general, the combination of US-TG treatments showed a more pronounced effect on the structure and mechanical properties.