Sustained-release antibacterial pads based on nonwovens polyethylene terephthalate modified by β-cyclodextrin embedded with cinnamaldehyde for cold fresh pork preservation

Research progress on natural preservatives of meat and meat products: classifications, mechanisms and applications

Meat and meat products are highly susceptible to contamination by microorganisms and foodborne pathogens, which cause serious economic losses and health hazards. The large consumption and waste of meat and meat products means that there is a need for safe and effective preservation methods. Furthermore, toxicological aspects of chemical preservation techniques related to major health problems have sparked controversies and have prompted consumers and producers to turn to natural preservatives. Consequently, natural preservatives are being increasingly used to ensure the safety and quality of meat products as a result of customer preferences and biological efficacy. However, information on the current status of these preservatives is scattered and a comprehensive review is lacking. Here, we review current knowledge on the classification, mechanisms of natural preservatives and their applications in the preservation of meat and meat products, and also discuss the potential of natural preservatives to improve the safety of meat and meat products. The current status and the current research gaps in the extraction, application and controlled-release of natural antibacterial agents for meat preservation are also discussed in detail. This review may be useful to the development of efficient food preservation techniques in the meat industry. © 2024 Society of Chemical Industry.

Mitigating quality deterioration in chilled pork by combining cinnamaldehyde nanoemulsions and a high-voltage electrostatic field

Cinnamaldehyde nanoemulsion (CNE) was obtained through ultrasonication, using Tween 80 as an emulsifier. The CNE was then applied to chilled pork in conjunction with a high-voltage electrostatic field (HVEF) to mitigate quality deterioration during refrigerated storage. The particle size of CNE ranged from 60 to 150 nm and was positively correlated with the amount of added cinnamaldehyde. The polydispersity index and zeta potential of CNE ranged from 0.25 to 0.30 and - 12 to -11 mV, respectively, indicating a narrow size distribution and stability. The CNE released the odor specific to cinnamaldehyde to pork in the first 4 days of chilling; however, it had little effect on the taste. HVEF pretreatment reduced the initial total viable count (TVC) in pork by 1.14 log cycle. The combination of CNE with HVEF successfully slowed down the loss of moisture, decrease in pH, and accumulation of total volatile basic nitrogen in pork during refrigeration. Furthermore, it mitigated the increase in TVC of pork. Therefore, this integrated method appears to be suitable for extending the shelf life of chilled pork.

Polyvinyl alcohol/soybean isolate protein composite pad with enhanced antioxidant and antimicrobial properties induced by novel ternary nanoparticles for fresh pork preservation

In this study, oregano essential oil (OEO)-loaded soluble soybean polysaccharide (SSPS) -nisin nanoparticles (ONSNPs) were formulated through electrostatic attraction-driven and hydrophobic interactions utilizing SSPS, nisin, and OEO as raw materials. ONSNPs were integrated into polyvinyl alcohol (PVA) and soybean protein isolate (SPI) matrices to create composite pads (PS-ONSNPs) by physically cross-linked using a simple freeze-thaw cycling process. The effects of ONSNPs content on the structure and physicochemical properties were evaluated. The results revealed that strong intermolecular interactions between ONSNPs and the PS matrices affected the crystallinity, microstructure, and thermal stability of the pads. Upon incorporating 5 % to 15 % ONSNPs, the structure of composite pads became denser, and the mechanical properties and water resistance were enhanced. Concurrently, the PS-ONSNPs pads facilitated the protection and controlled release of OEO. Furthermore, ONSNPs significantly improved the antioxidant activity of the pads and effectively inhibited the growth of Staphylococcus aureus and Escherichia coli. The prepared PS-ONSNPs 15 % pad was applied to storage experiments of fresh pork, which could extend the shelf life of meat to 10-12 days under 4 °C storage conditions. Therefore, the composite pad devised in this research holds promise as a viable option for intelligent active packaging of fresh meat.

Chitosan-based packaging films with antibacterial-sterilization integrated continuous activity for extending the shelf life of perishable foods

The current food packaging films can be preservative but lack the function of combining antibacterial and sterilization which lead to films can not maximize prolong shelf life of perishable foods. This study provided a new strategy to realize prolonging shelf life of perishable foods by integrating antibacterial and sterilization which focused on applying photodynamic inactivation to films with continuous activity, where curcumin (CUR) and sodium copper chlorophyll (SCC) were loaded into chitosan (CS) films. Compared to pure CS films, the barrier capacity (oxygen permeability and water vapor permeability) and mechanical properties of composite films were improved by introducing CUR and SCC. In addition, the composite film can effectively against food-borne pathogenic bacteria and significantly prolong the shelf life of cherries and pork. The provided strategy has potential application prospects in food preservation packaging.

Enhanced antioxidant and antibacterial activities of chitosan/zein nanoparticle Pickering emulsion-incorporated chitosan coatings in the presence of cinnamaldehyde and tea polyphenol

Pickering emulsions were prepared by using zein/chitosan nanoparticles as stabilizer and then incorporated into chitosan coatings. To improve the stability and performances, tea polyphenol and cinnamaldehyde (CA) were used to modulate the formation and functionalities of Pickering emulsions. The oil phase in Pickering emulsions were set at 5 % and 20 % to alter the hydrophobicity of chitosan coatings. Physical, structural, antioxidant and antibacterial activities of chitosan coatings with Pickering emulsions were characterized. Tea polyphenol significantly enhanced antioxidant capacity of chitosan coatings from 2.09 % to 57.61 % of DPPH value and from 2.63 % to 38.85 % of ABTS value. CA effectively increased the antibacterial activity of chitosan coatings against S. aureus and E. coli. Under 20 % oil content, the inhibition zones on S. aureus and E. coli increased from 3.03 ± 0.23 mm to 18.39 ± 1.22 mm and 7.66 ± 1.61 mm to 15.70 ± 1.75 mm, respectively. The preservative effect of chitosan coatings on fresh pork was further confirmed that the shelf-life of fresh pork could be extended by >4 days. These results suggested a great potential application of Pickering emulsion-incorporated chitosan coatings in the preservation of fresh pork.

Sustained free chlorine-releasing polydimethylsiloxane/Ca(ClO)2 materials with long-lasting disinfection efficacy

A novel sustained chlorine-releasing polydimethylsiloxane/Ca(ClO)2 (PDMS/Ca(ClO)2) material was fabricated by encapsulating Ca(ClO)2 in a PDMS matrix due to its high hydrophobicity and high chemical stability, which showed immediate-responsive and long-lasting antibacterial capabilities in aqueous conditions. Free chlorine could be released from the PDMS/Ca(ClO)2 after immersion in water for 2 min and could also be sustainedly released for 2 weeks, while the released concentration is negatively related to the duration time and positively with the initial Ca(ClO)2 contents. Additionally, Ca(ClO)2 powder as a filler significantly affects the crosslinking and pore size of PDMS. The PDMS/Ca(ClO)2 materials exhibited enduring antibacterial performance against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in both planktonic and multispecies-biofilm status. It is expected that this PDMS/Ca(ClO)2 material and its similar composite would be promising candidates for wide sustainable disinfection applications in biomedical and industrial fields.

Development and characterization of smart double-layer nanofiber mats based on potato starch-turnip peel anthocyanins and guar gum-cinnamaldehyde

This experiment was conducted with the objectives of developing bilayer nanofiber mats based on potato starch-turnip peel extract (PS-TPE) and guar gum-cinnamaldehyde (GG-CA) for freshness monitoring and enhancing the quality of lamb meat during cooled storage conditions. Encapsulating CA/TPE into the nanofibers resulted in reduced tensile strength, water vapor permeability, moisture content, and water solubility. Colorimetric nanofibers, including PS-GG-TPE 6%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1%, presented red color at pH 1-4, purplish red at pH 5-7, green at pH 8-10, and brown at pH 11-12. The color of PS-GG-TPE 6% nanofiber mats changed from white to purplish red, signaling that the lamb meats had turned from fresh to spoiled. PS-GG-CA 1%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1% nanofibers have the potential to be utilized to control the growth of spoilage-related microorganisms for extending the shelf-life of fresh lamb meat under cooled storage conditions up to 13 days.

Fluorescence and pectinase double-triggered chitosan/pectin/calcium propionate/curcumin-β-cyclodextrin complex film for pork freshness monitoring and maintenance

An intelligent and active food packaging film based on chitosan (CS), pectin (P), calcium propionate (CP), and curcumin-β-cyclodextrin complex (Cur-β-CD) was prepared. The CS/P/CP/Cur-β-CD film exhibited improved hydrophobicity (74.78 ± 0.53°), water vapor (4.55 ± 0.16 × 10-11 g·(m·s·Pa)-1), and oxygen (1.50 ± 0.06 × 10-12 g·(m·s·Pa)-1) barrier properties, as well as antioxidant (72.34 ± 3.79 % for DPPH and 86.05 ± 0.14 % for ABTS) and antibacterial (79.41 ± 2.89 % for E. coli and 83.82 ± 3.96 % for S. aureus) activities. The release of CP and Cur could be triggered by pectinase, with their cumulative release reaching 92.62 ± 1.20 % and 42.24 ± 1.15 %, respectively. The CS/P/CP/Cur-β-CD film showed delayed alterations in surface color, pH value, total volatile bases nitrogen, total viable counts, thiobarbituric acid reactive substance, hardness, and springiness of pork. Additionally, the fluorescence intensity of the film gradually decreased. In conclusion, we have developed a pH-responsive film with pectinase-triggered release function, providing a new concept for the design of multi-signal responsive intelligent food packaging.

Extrusion-blown oxidized starch/poly(butylene adipate-co-terephthalate) biodegradable active films with adequate material properties and antimicrobial activities for chilled pork preservation

Food safety concerns from spoilage and non-degradable packaging risk human health. Progress made in biodegradable plastic films, but limited study on biomass composite films with favorable morphological, mechanical, and inherent antibacterial properties for fresh meat preservation. Herein, we present a versatile packaging film created through the extrusion blowing process, combining oxidized starch (OST) with poly(butylene adipate-co-terephthalate) (PBAT). SEM analysis revealed even distribution of spherical OST particles on film's surface. FTIR spectra revealed new intermolecular hydrogen bonds between OST and PBAT. While combining OST slightly reduced tensile properties, all composite films met the required strength of 16.5 ± 1.39 MPa. Notably, films with 40 % OST showed over 98 % antibacterial rate against Staphylococcus aureus within 2 h. pH wasn't the main cause of bacterial growth inhibition; OST hindered growth by interfering with nutrient absorption and metabolism due to its carboxyl groups. Additionally, OST disrupted bacterial membrane integrity and cytoplasmic membrane potential. Remarkably, the OST/PBAT film excellently preserved chilled fresh pork, maintaining TVB-N level at 12.6 mg/100 g on day 6, microbial count at 105 CFU/g within 6-10 days, and sensory properties for 8 days. It extended pork's shelf life by two days compared to polyethylene film, suggesting an alternative to a synthetic material.

pH-responsive double-layer film based on chitosan/curcumin-β-cyclodextrin complex/cinnamaldehyde and zein/alizarin for pork freshness monitoring and maintaining

A pH-responsive double-layer film comprising chitosan (CS), zein (Z), curcumin-β-cyclodextrin complex (Cur- β-CD), alizarin (AL) and cinnamaldehyde (CIN) was developed to detect spoilage and prolong the shelf life of pork. The outer Z/AL is the colorimetric responsive and highly protective outer layer, while the CS/Cur- β-CD/CIN is the fluorescence responsive and functional layer. The CS/Cur- β-CD/CIN-Z/AL film demonstrated excellent barrier properties against oxygen (8.48 × 10-13 g (m s Pa)-1) and water (2.42 × 10-11 g (m s Pa)-1) primarily due to the polar interactions in the Z structure and its hydrophobic nature. The addition of AL and Cur provided the CS/Cur- β-CD/CIN-Z/AL film with pH colorimetric and fluorescence response capabilities, respectively. Furthermore, the inclusion of Cur- β-CD, CIN and AL significantly enhanced the film's antioxidant and antibacterial properties, with radical scavenging rates of 79.29 % (DPPH) and 89.84 % (ABTS), as well as antibacterial efficiencies of 96.2 % (S. aureus) and 85.78 % (E. coli). To test the effectiveness of the double-layer film, a freshness monitoring and maintenance experiment was conducted on pork stored at 4 °C for 8 days. Various parameters of pork, including surface color, pH value, total volatile bases nitrogen (TVB-N), total viable counts (TVC), thiobarbituric acid reactive substance (TBARS), hardness and springiness, were measured, along with the color and fluorescence intensity (FL) of the film. The shelf life of the pork was extended by at least 2 days compared to the control group, and the pork was considered inedible if ΔE ≥ 12 or FL intensity ≤ 2160. Overall, this food packaging film shows promise in simultaneously monitoring and maintaining the freshness of pork.

Cyclodextrins for the Delivery of Bioactive Compounds from Natural Sources: Medicinal, Food and Cosmetics Applications

Cyclodextrins have gained significant and established attention as versatile carriers for the delivery of bioactive compounds derived from natural sources in various applications, including medicine, food and cosmetics. Their toroidal structure and hydrophobic cavity render them ideal candidates for encapsulating and solubilizing hydrophobic and poorly soluble compounds. Most medicinal, food and cosmetic ingredients share the challenges of hydrophobicity and degradation that can be effectively addressed by various cyclodextrin types. Though not new or novel-their first applications appeared in the market in the 1970s-their versatility has inspired numerous developments, either on the academic or industrial level. This review article provides an overview of the ever-growing applications of cyclodextrins in the delivery of bioactive compounds from natural sources and their potential application benefits.

Preparation and characterization of a novel absorbent pad based on polyvinyl alcohol/gellan gum/citric acid with incorporated Perilla leaf oil nanoemulsion for chilled chicken packaging

A novel absorbent pad based on polyvinyl alcohol (PVA)/gellan gum/citric acid (CA) composite with incorporated Perilla leaf oil (PO) nanoemulsion was prepared and characterized. The esterification between PVA and CA and strong hydrogen bonds were detected. The PVA improved the tensile strength and elongation at break by 110% and 73%, respectively, whereas PO concentration ≤ 1.5 % (w/v) had little effect on the material properties. The CA and PO nanoemulsion loaded in the pads showed good antioxidant activity, and the pads with PO concentration ≥ 1.5 % (w/v) had effective antimicrobial activity against Escherichia coli and Staphylococcus aureus. The results of chilled chicken storage experiments indicated that the pad with 1.5% (w/v) PO nanoemulsion extended the shelf life of chicken to at least 9 days, demonstrating that the developed absorbent pads are potential materials for chilled chicken storage packing.

Development and Evaluation of the Properties of Active Films for High-Fat Fruit and Vegetable Packaging

β-cyclodextrin and allyl isothiocyanate inclusion complexes (β-CD:AITC) have been proposed for developing fresh fruit and vegetable packaging materials. Therefore, the aim of this research was to develop active materials based on poly(lactic acid) (PLA) loaded with β-CD:AITC and to assess changes in the material properties during the release of AITC to food simulants. PLA films with 0, 5 and 10 wt.% β-CD:AITC were developed by extrusion. Surface properties were determined from contact angle measurements. Films were immersed in water, aqueous and fatty simulants to assess the absorption capacity and the change in the thermal properties. Moreover, the release of AITC in both simulants was evaluated by UV-spectroscopy and kinetic parameters were determined by data modeling. Results showed that a higher concentration of β-CD:AITC increased the absorption of aqueous simulant of films, favoring the plasticization of PLA. However, the incorporation of β-CD:AITC also avoided the swelling of PLA in fatty simulant. These effects and complex relationships between the polymer, inclusion complexes and food simulant explained the non-systematic behavior in the diffusion coefficient. However, the lower partition coefficient and higher percentage of released AITC to the fatty simulant suggested the potential of these materials for high-fat fruit and vegetable active packaging applications.

Triple-function chitosan-based film for pork and shrimp packaging

A film simultaneously with colorimetric, fluorescent and active functions was engineered using chitosan (CS) and polyvinyl alcohol (PVA) as the film matrix and curcumin-β-cyclodextrin complex (Cur-β-CD) as the indicator for freshness monitoring and maintaining of pork and shrimp. In addition to the efficacy of prolonging shelf life, the film's color could change from yellow to orange with ΔE > 5 and its fluorescence intensity could decrease during storage. The incorporation of PVA significantly enhanced the mechanical properties of CS film with tensile strength of 31.80 MPa and elongation at break of 127.22 %. The Cur-β-CD improved the antioxidant and antibacterial properties, water contact angle (from 86.3° to 111.2°), water vapor permeability (from 3.28 × 10^-10 g (m s Pa)^-1 to 0.42 × 10^-10 g (m s Pa)^-1) and mechanical properties of CS/PVA film. These results show the potential of the film as promising alternatives for intelligent and active food packaging.

Effects of Different Low-Temperature Storage Methods on the Quality and Processing Characteristics of Fresh Beef

Low-temperature storage has become the most common way for fresh meat storage because of its lower cost and better preservation effect. Traditional low-temperature preservation includes frozen storage and refrigeration storage. The refrigeration storage has a good fresh-keeping effect, but the shelf life is short. Frozen storage has a long shelf life, but it has a great impact on the quality of meat structure and other qualities, and cannot achieve a complete "fresh-keeping" effect. With the development of food processing storage and freezing technology, two new storage methods, ice temperature storage and micro-frozen storage, have attracted more attention. In this paper, the effects of different low-temperature storage methods on the sensory, physicochemical properties, myofibrillar protein oxidation, microstructure, and processing characteristics of fresh beef were studied. The optimal storage methods under different storage requirements were analyzed to reveal the mechanism and efficacy of ice temperature storage and micro-frozen storage technology, as well as the advantages compared with traditional low-temperature refrigeration. It has practical significance for guiding the application of low-temperature storage of fresh meat. Finally, this study concluded that the longest shelf life could be achieved by frozen storage, and the best preservation effect was achieved during the shelf life of ice temperature storage, and the effect of micro-frozen storage on the myofibrillar protein oxidation and microstructure was the best.

What is the role of active packaging in the future of food sustainability? A systematic review

Nowadays, the strong increase in products consumption, the purchase of products on online platforms as well as the requirements for greater safety and food protection are a concern for food and packaging industries. Active packaging brings huge advances in the extension of product shelf-life and food degradation and losses reduction. This systematic work aims to collect and evaluate all existing strategies and technologies of active packaging that can be applied in food products, with a global view of new possibilities for food preservation. Oxygen scavengers, carbon dioxide emitters/absorbers, ethylene scavengers, antimicrobial and antioxidant active packaging, and other active systems and technologies are summarized including the products commercially available and the respective mechanisms of action. © 2022 Society of Chemical Industry.

Transcriptome analysis reveals the molecular mechanism of cinnamaldehyde against Bacillus cereus spores in ready-to-eat beef

The purpose of this study was to investigate the antibacterial effect and mechanism of cinnamaldehyde on Bacillus cereus spores in ready-to-eat beef. The colour difference and texture of the ready-to-eat beef supplemented with cinnamaldehyde did not differ greatly from the colour and texture of the blank beef. However, cinnamaldehyde has an effective antibacterial effect on the total number of bacterial colonies and B. cereus spores in ready-to-eat beef. Transmission electron microscopy (TEM) analysis revealed that the cell membrane of B. cereus was disrupted by cinnamaldehyde, leading to leakage of intracellular components. Transcriptome sequencing (RNA-seq) indicated that the B. cereus spore resistance regulation system (sigB, sigW, rsbW, rsbV, yfkM and yflT) and phosphoenolpyruvate phosphotransferase system (PTS) (ptsH, ptsI and ptsG) respond positively to cinnamaldehyde in an adverse environment. Intracellular disorders due to damage to the cell membrane involve some transporters (copA, opuBA and opuD) and some oxidative stress systems (ywrO, scdA and katE) in the regulation of the body. However, downregulation of K⁺ transport channels (kdpD and kdpB), osmotic pressure regulation (opuE) and some oxidative stress (norR and srrA)-related genes may accelerate spore apoptosis. In addition, cinnamaldehyde also effectively inhibits the spore germination-related genes (smc, mreB and gerE). This study provides new insights into the molecular mechanism of the antibacterial effect of cinnamaldehyde on B. cereus spores in ready-to-eat beef.

Effects of starch/polyvinyl alcohol active film containing cinnamaldehyde on the quality of large yellow croaker (Pseudosciaena crocea) proteins during frozen storage

This study aimed to investigate the effects of starch/polyvinyl alcohol (starch/PVA) film containing cinnamaldehyde (CIN) with different humidity treatment on the quality changes of large yellow croaker (Pseudosciaena crocea) under vacuum packaging during frozen storage. It was evaluated by measuring the water loss, water migration, total volatile basic nitrogen (TVB-N), thiobarbituric acid (TBA), free amino acids (FAA) content, myofibril secondary and tertiary structure and microstructure of large yellow croaker. Compared with control group, the starch/PVA films could inhibit the water loss, water migration, protein degradation, lipid oxidation and microstructure damage of fish. The film containing CIN with higher humidity treatment showed the best protective effect for large yellow croaker. The film with higher humidity treatment showed better to maintain the quality of fish than that with low humidity treatment. Therefore, starch/PVA active film containing CIN with high humidity treatment showed good fresh-keeping potential in the frozen storage of aquatic products.

Antimicrobial and Antioxidant Effects of Kappa-Carrageenan Coatings Enriched with Cinnamon Essential Oil in Pork Meat

Fresh pork is susceptible to microbial contamination and lipid oxidation, which leads to food safety and quality issues. This study aimed to develop a kappa-carrageenan (KC) coating embedded with cinnamon essential oil (CEO) for antimicrobial and antioxidant purposes in pork meat. The uncoated controls and coated samples were subjected to microbial (total viable count, lactic acid bacteria, and H2S-producing bacteria), chemical (DPPH and pH), and physical (surface color) analyses during refrigerated storage at 4 °C for 7 days. It was observed that KC coatings exhibited a better preservation effect on pork meat after the addition of CEO. The KC−CEO coatings were effective in retarding the growth of total viable count, lactic acid bacteria, and H2S-producing bacteria. In a DPPH test, the level of lipid oxidation in pork meat was also significantly (p < 0.05) reduced by the KC−CEO coatings. Furthermore, these coatings displayed pronounced activity in inhibiting the adverse alterations of pH value and surface color. Practically, KC−CEO-coated samples still exhibited an attractive bright red color at the end of refrigerated storage. Taken together, the developed KC−CEO coatings exerted pronounced antimicrobial and antioxidant activities in pork, thus providing a potential approach to preserving perishable meat.

Bio-based antibacterial food packaging films and coatings containing cinnamaldehyde: A review

As a typical bioactive compound from the bark and leaves of the trees of the genus Cinnamomum, cinnamaldehyde (CIN) is natural and safe. Its excellent antibacterial activity against various foodborne microorganisms is growingly regarded as a promising additive for improving and enhancing the properties of bio-based packaging films/coatings. This review systematically summarized the bio-based food packaging films/coatings containing CIN developed recently. The effects of CIN incorporation on physical and chemical properties of the antibacterial food packaging films/coatings, including thickness, color index, transparency, water content, water solubility, water contact angle, mechanical performances, water barrier performances, and antibacterial performances, were discussed. Simultaneously, this work also concluded that an explanation of the antibacterial mechanism of CIN and preparation methods of bio-based packaging films/coatings containing CIN/CIN carriers. Notably, the incorporation of CIN into the films/coatings could enhance their antibacterial performance extend the shelf-life of various foods, such as fish, meats, vegetables, fruits, and other perishable food, while improving their physical and chemical properties. Although incorporating CIN into food packaging films/coatings has been extensively studied, long-term follow-up research on the human safety of active food packaging films/coatings containing CIN needs to be carried out.

Development of nanofiber indicator with high sensitivity for pork preservation and freshness monitoring

A visual Polyvinylidene Fluoride (PVDF) fibrous film incorporated with Roselle anthocyanin (RS) and Cinnamon essential oil (CEO) (PRC film) was designed via electrospinning technology for pork preservation and freshness monitoring. The PRC film presented well structural integrity and stability in buffer solutions without leaking out RS. And PCR film had well hydrophobic and high permeability with water contact angle (WCA) of 109.52° and water vapor permeability (WVP) of 2.63 × 10^-7 g m^-1h^-1Pa^-1. Importantly, PRC film exhibited good antibacterial activity with the inhibition diameter at 29.0 mm and 27.1 mm which against Escherichia coli and staphylococcus aureus, respectively. Finally, the PRC film was employed as a colorimetric sensor for monitoring pork freshness. It presented visible color changes from pink to blue and effectively prolonged the pork shelf-life by 2 days at 4 °C. These results indicate a great potential in intelligent and active packaging.

Pickering emulsions stabilized by β-cyclodextrin and cinnamaldehyde essential oil/β-cyclodextrin composite: A comparison study

Here, a cinnamaldehyde essential oil (CEO)/β-Cyclodextrin (β-CD) composite with a high embedding rate (91.74 ± 0.82%) was prepared. Its structure was characterized by Fourier transform infrared spectrometer (FT-IR) and X-ray diffractometer (XRD). Pickering emulsions prepared by β-CD and CEO/β-CD at different concentrations (1-5%) were comparatively investigated. The CEO/β-CD emulsions had better storage stability. Rheological results confirmed the emulsions were all gel-like elastic emulsions and had shear thinning phenomenon. Fluorescence microscopy and scanning electron microscopy (SEM) results confirmed that the most of excessive β-CD was adsorbed on the surface of emulsion droplets as crystals, formed thick protective shell in β-CD emulsions, while the most of excessive composites were distributed in the aqueous phase forming a stable network structure in CEO/β-CD emulsions. It caused these two emulsions had different rheological properties, and different changing trends in droplet size.

Photodynamic Effect of Riboflavin on Chitosan Coatings and the Application in Pork Preservation

Riboflavin (RF) was considered to be possessed of photoactivity to generate reactive oxygen species (ROS) under ultraviolet (UV) light, which is thought to be a favorable antibacterial candidate. Herein, RF was incorporated into chitosan (CS) coatings and treated under UV with different exposure times (2, 4, and 6 h) to improve the physicochemical and antibacterial properties. The results showed that the light transmittance and antibacterial performance of chitosan coatings gradually increased with the extension of the UV irradiation time. The antibacterial ability of chitosan coatings correlated with the generation of ROS: ∙OH and H₂O₂, which achieved 1549.08 and 95.48 μg/g, respectively, after 6 h irradiation. Furthermore, the chitosan coatings with UV irradiation also reduced the pH value, total volatile basic nitrogen (TVB-N), ΔE, and total viable counts (TVC) and improved sensory attributes of pork. In conclusion, the UV irradiated chitosan coatings could be used as an environmentally friendly antimicrobial packaging material to effectively delay the spoilage of pork, maintain its sensory quality and prolong its shelf life.

Antibacterial Mechanism of 3-Carene against the Meat Spoilage Bacterium Pseudomonas lundensis and Its Application in Pork during Refrigerated Storage

Pseudomonas lundensis is the main bacterium responsible for meat spoilage and its control is of great significance. 3-Carene, a natural monoterpene, has been proved to possess antimicrobial activities. This study aimed to investigate the antibacterial activity and mechanism of 3-carene against the meat spoilage bacterium P. lundensis, and explore its application on pork. After 3-carene treatment, cellular structural changes were observed. Cell walls and membranes were destroyed, resulting in the leakage of alkaline phosphatase and cellular contents. The decreased activity of Ca²⁺-Mg²⁺-ATPase and Na⁺-K⁺-ATPase showed the imbalance of intracellular ions. Subsequently, adenosine triphosphate (ATP) content and oxidative respiratory metabolism characteristics indicated that 3-carene inhibited the metabolism of the tricarboxylic acid cycle in P. lundensis. The results of binding 3-carene with the vital proteins (MurA, OmpW, and AtpD) related to the formation of the cell wall, the composition of the cell membrane, and the synthesis of ATP further suggested that 3-carene possibly affected the normal function of those proteins. In addition, the growth of P. lundensis and increase in pH were inhibited in pork during the 5 days of cold storage after the samples were pre-treated with 3-carene. These results show the anti-P. lundensis activity and mechanism of 3-carene, and its potential use in meat preservation under refrigerated conditions.

Native Cyclodextrins and Their Derivatives as Potential Additives for Food Packaging: A Review

Cyclodextrins (CDs) have been used by the pharmaceutical and food industries since the 1970s. Their cavities allow the accommodation of several hydrophobic molecules, leading to the formation of inclusion complexes (ICs) increasing the guest molecules’ stability, allowing their controlled release, enhancing their water solubility and biodisponibility. Due to these, CDs and their ICs have been proposed to be used as potential allies in food packaging, especially in active packaging. In this review, we present the many ways in which the CDs can be applied in food packaging, being incorporated into the polymer matrix or as a constituent of sachets and/or pads aiming for food preservation, as well as the diverse polymer matrices investigated. The different types of CDs, natives and derivatives, and the several types of compounds that can be used as guest molecules are also discussed.

Encapsulation of cinnamaldehyde: an insight on delivery systems and food applications

Cinnamaldehyde is an essential oil extracted from the leaves, bark, roots and flowers of cinnamon plants (genus Cinnamomum). Cinnamaldehyde has shown biological functions such as antioxidants, antimicrobials, anti-diabetic, anti-obesity and anti-cancer. However, poor solubility in water as well as molecular sensitivity to oxygen, light, and high temperature limit the direct application of cinnamaldehyde. Researchers are using different encapsulation techniques to maximize the potential biological functions of cinnamaldehyde. Different delivery systems such as liposomes, emulsions, biopolymer nanoparticles, complex coacervation, molecular inclusion, and spray drying have been developed for this purpose. The particle size and morphology, composition and physicochemical properties influence the performance of each delivery system. Consequently, the individual delivery system has its advantages and limitations for specific applications. Given the essential role of cinnamaldehyde in functional food and food preservation, appropriate approaches should be applied in the encapsulation and application of encapsulated cinnamaldehyde. This review systematically analyzes available encapsulation techniques for cinnamaldehyde in terms of their design, properties, advantages and limitations, and food application status. The information provided in this manuscript will assist in the development and widespread use of cinnamaldehyde-loaded particles in the food and beverage industries.

Development of a Sodium Alginate-Based Active Package with Controlled Release of Cinnamaldehyde Loaded on Halloysite Nanotubes

The worsening environment and the demand for safer food have accelerated the development of new food packaging materials. The objective of this research is to prepare antimicrobial food packaging film with controlled release by loading cinnamaldehyde (CIN) on etched halloysite nanotubes (T-HNTs) and adding it to sodium alginate (SA) matrix. The effects of T-HNTs-CIN on the physical functional properties and antibacterial activity of the film were systematically evaluated, and the release of CIN in the film was also quantified. Transmission electron microscopy and nitrogen adsorption experiments showed that the halloysite nanotubes had been etched and CIN was successfully loaded into the T-HNTs. The addition of T-HNTs-CIN significantly improved the water vapor barrier properties and tensile strength of the film. Similarly, the presence of T-HNTs-CIN in the film greatly reduced the negative effects of ultraviolet rays. The release experiment showed that the diffusion time of CIN in SA/T-HNTs-CIN film to fatty food simulation solution was delayed 144 h compared with that of SA/CIN film. Herein, the antibacterial experiment also confirmed the controlled release effect of T-HNTs on CIN. In conclusion, SA/T-HNTs-CIN film might have broad application prospects in fatty food packaging.