Disruption of ku70 involved in non-homologous end-joining facilitates homologous recombination but increases temperature sensitivity in the phytopathogenic fungus Penicillium digitatum

Development of a marker recyclable CRISPR/Cas9 system for scarless and multigene editing in Fusarium fujikuroi

Iterative metabolic engineering of Fusarium fujikuroi has traditionally been hampered by its low homologous recombination efficiency and scarcity of genetic markers. Thus, the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated proteins (Cas9) system has emerged as a promising tool for precise genome editing in this organism. Some integrated CRISPR/Cas9 strategies have been used to engineer F. fujikuroi to improve GA3 production capabilities, but low editing efficiency and possible genomic instability became the major obstacle. Herein, we developed a marker recyclable CRISPR/Cas9 system for scarless and multigene editing in F. fujikuroi. This system, based on an autonomously replicating sequence, demonstrated the capability of a single plasmid harboring all editing components to achieve 100%, 75%, and 37.5% editing efficiency for single, double, and triple gene targets, respectively. Remarkably, even with a reduction in homologous arms to 50 bp, we achieved a 12.5% gene editing efficiency. By employing this system, we successfully achieved multicopy integration of the truncated 3-hydroxy-3-methyl glutaryl coenzyme A reductase gene (tHMGR), leading to enhanced GA3 production. A key advantage of our plasmid-based gene editing approach was the ability to recycle selective markers through a simplified protoplast preparation and recovery process, which eliminated the need for additional genetic markers. These findings demonstrated that the single-plasmid CRISPR/Cas9 system enables rapid and precise multiple gene deletions/integrations, laying a solid foundation for future metabolic engineering efforts aimed at industrial GA3 production.

Strategies for the Development of Industrial Fungal Producing Strains

The use of microorganisms in industry has enabled the (over)production of various compounds (e.g., primary and secondary metabolites, proteins and enzymes) that are relevant for the production of antibiotics, food, beverages, cosmetics, chemicals and biofuels, among others. Industrial strains are commonly obtained by conventional (non-GMO) strain improvement strategies and random screening and selection. However, recombinant DNA technology has made it possible to improve microbial strains by adding, deleting or modifying specific genes. Techniques such as genetic engineering and genome editing are contributing to the development of industrial production strains. Nevertheless, there is still significant room for further strain improvement. In this review, we will focus on classical and recent methods, tools and technologies used for the development of fungal production strains with the potential to be applied at an industrial scale. Additionally, the use of functional genomics, transcriptomics, proteomics and metabolomics together with the implementation of genetic manipulation techniques and expression tools will be discussed.

Marker-free CRISPR-Cas9 based genetic engineering of the phytopathogenic fungus, Penicillium expansum

Filamentous fungi are prolific producers of secondary metabolites (SecMets), including compounds with antibiotic properties, like penicillin, that allows the producing fungus to combat competitors in a shared niche. However, the biological function of the majority of these small complex metabolites for the producing fungi remains unclear (Macheleidt et al., 2016). In an effort to address this lack of knowledge, we have chosen to study the microbial community of moldy apples in the hope of shedding more light on the role of SecMets for the dynamics of the microbial community. Penicillium expansum is one of the prevalent fungal species in this system, and in co-culture experiments with other apple fungal pathogens, we have observed up- and downregulation of several SecMets when compared to monocultures. However, molecular genetic dissection of the observed changes is challenging, and new methodologies for targeted genetic engineering in P. expansum are needed. In the current study, we have established a CRISPR-Cas9 dependent genetic engineering toolbox for the targeted genetic manipulation of P. expansum to allow for single-step construction of marker-free strains. The method and effect of different combinations of a Cas9-sgRNA expressing plasmids and repair template substrates in the NHEJ-proficient WT strain is tested by targeted deletion of melA, encoding a PKS responsible for pigment formation, which upon deletion resulted in white mutants. Co-transformation with a linear double-stranded DNA fragment consisting of two 2 kb homology arms flanking the PKS gene proved to be the most efficient strategy with 100% confirmed deletions by diagnostic PCR. Shorter homology arms (500-1000bp) resulted in 20-30% deletion efficiency. Furthermore, we demonstrate the application of the CRISPR-Cas9 method for targeted deletion of biosynthetic genes without a visible phenotype, insertion of a visual reporter-encoding gene (mRFP), and overexpression of biosynthetic genes. Combined, these tools will advance in enabling the deciphering of SecMet biosynthetic pathways, provide in situ insight into when and where SecMets are produced, and provide an avenue to study the role of P. expansum SecMets in shaping the microbial community development on moldy apples via marker-free targeted genetic engineering of P. expansum.

Conversion of viridicatic acid to crustosic acid by cytochrome P450 enzyme-catalysed hydroxylation and spontaneous cyclisation

Cytochrome P450 monooxygenases (P450s) are considered nature's most versatile catalysts and play a crucial role in regio- and stereoselective oxidation reactions on a broad range of organic molecules. The oxyfunctionalisation of unactivated carbon-hydrogen (C-H) bonds, in particular, represents a key step in the biosynthesis of many natural products as it provides substrates with increased reactivity for tailoring reactions. In this study, we investigated the function of the P450 enzyme TraB in the terrestric acid biosynthetic pathway. We firstly deleted the gene coding for the DNA repair subunit protein Ku70 by using split marker-based deletion plasmids for convenient recycling of the selection marker to improve gene targeting in Penicillium crustosum. Hereby, we reduced ectopic DNA integration and facilitated genetic manipulation in P. crustosum. Afterward, gene deletion in the Δku70 mutant of the native producer P. crustosum and heterologous expression in Aspergillus nidulans with precursor feeding proved the involvement of TraB in the formation of crustosic acid by catalysing the essential hydroxylation reaction of viridicatic acid. KEY POINTS: •Deletion of Ku70 by using split marker approach for selection marker recycling. •Functional identification of the cytochrome P450 enzyme TraB. •Fulfilling the reaction steps in the terrestric acid biosynthesis.

Improving the homologous recombination efficiency of Yarrowia lipolytica by grafting heterologous component from Saccharomyces cerevisiae

The oleaginous non-conventional yeast Yarrowia lipolytica has enormous potential as a microbial platform for the synthesis of various bioproducts. However, while the model yeast Saccharomyces cerevisiae has very high homologous recombination (HR) efficiency, non-homologous end-joining is dominant in Y. lipolytica, and foreign genes are randomly inserted into the genome. Consequently, the low HR efficiency greatly restricts the genetic engineering of this yeast. In this study, RAD52, the key component of the HR machinery in S. cerevisiae, was grafted into Y. lipolytica to improve HR efficiency. The gene ade2, whose deletion can result in a brown colony phenotype, was used as the reporter gene for evaluating the HR efficiency. The HR efficiency of Y. lipolytica strains before and after integrating the ScRad52 gene was compared using insets with homology arms of different length. The results showed that the strategy could achieve gene targeting efficiencies of up to 95% with a homology arm length of 1000 bp, which was 6.5 times of the wildtype strain and 1.6 times of the traditionally used ku70 disruption strategy. This study will facilitate the further genetic engineering of Y. lipolytica to make it a more efficient cell factory for the production of value-added compounds.

•

The gene ade2 was chose as the reporter gene for evaluating the HR efficiency.

•

RAD52 governing the HR machinery in S. cerevisiae was grafted into Y. lipolytica.

•

RAD52 could improve the HR efficiency of Y. lipolytica.

•

It was better than the traditionally used ku70 disruption strategy.

Synthesis of the Hydroxamate Siderophore N α-Methylcoprogen B in Scedosporium apiospermum Is Mediated by sidD Ortholog and Is Required for Virulence

Scedosporium species rank second among the filamentous fungi capable to colonize chronically the respiratory tract of patients with cystic fibrosis (CF). Nevertheless, there is little information on the mechanisms underpinning their virulence. Iron acquisition is critical for the growth and pathogenesis of many bacterial and fungal genera that chronically inhabit the CF lungs. In a previous study, we showed the presence in the genome of Scedosporium apiospermum of several genes relevant for iron uptake, notably SAPIO_CDS2806, an ortholog of sidD, which drives the synthesis of the extracellular hydroxamate-type siderophore fusarinine C (FsC) and its derivative triacetylfusarinine C (TAFC) in Aspergillus fumigatus. Here, we demonstrate that Scedosporium apiospermum sidD gene is required for production of an excreted siderophore, namely, N^α-methylcoprogen B, which also belongs to the hydroxamate family. Blockage of the synthesis of N^α-methylcoprogen B by disruption of the sidD gene resulted in the lack of fungal growth under iron limiting conditions. Still, growth of ΔsidD mutants could be restored by supplementation of the culture medium with a culture filtrate from the parent strain, but not from the mutants. Furthermore, the use of xenosiderophores as the sole source of iron revealed that S. apiospermum can acquire the iron using the hydroxamate siderophores ferrichrome or ferrioxamine, i.e., independently of N^α-methylcoprogen B production. Conversely, N^α-methylcoprogen B is mandatory for iron acquisition from pyoverdine, a mixed catecholate-hydroxamate siderophore. Finally, the deletion of sidD resulted in the loss of virulence in a murine model of scedosporiosis. Our findings demonstrate that S. apiospermum sidD gene drives the synthesis of a unique extracellular, hydroxamate-type iron chelator, which is essential for fungal growth and virulence. This compound scavenges iron from pyoverdine, which might explain why S. apiospermum and Pseudomonas aeruginosa are rarely found simultaneously in the CF lungs.

An efficient genetic transformation system for Chinese medicine fungus Tolypocladium ophioglossoides

Tolypocladium ophioglossoides is a rare and valuable fungus extensively used in Chinese medicine for relieving postmenopausal syndrome in women yet its bioactive molecules are unknown. To explore its molecular mechanisms, we have developed a reliable Agrobacterium-mediated transformation system using the selective marker: the chlorimuron ethyl-resistance gene sur. For this purpose, we firstly constructed a T-DNA binary vector system and then improved the transformation efficiency by optimizing conditional parameters including the Agrobacterium tumefaciens concentration, the conidia number of T. ophioglossoides, the co-culture time and the concentration of acetosyringone. Furthermore, we have knocked-out the ku70 gene，which is a key gene in non-homologous end joining (NHEJ) DNA repair pathway，and the effect of the length of the homologous arms (HA) on the genetic transformation efficacy was also examined, which increased by 60% when HA was about 3 kb in length. Our results suggest that the genetic transformation system is efficient and feasible for the truffle-parasite fungus T. ophioglossoides, which can further be used in large-scale experiments for characterization of genes of interest in future work.

Genome sequencing of evolved aspergilli populations reveals robust genomes, transversions in A. flavus, and sexual aberrancy in non-homologous end-joining mutants

Background

Aspergillus spp. comprises a very diverse group of lower eukaryotes with a high relevance for industrial applications and clinical implications. These multinucleate species are often cultured for many generations in the laboratory, which can unknowingly propagate hidden genetic mutations. To assess the likelihood of such events, we studied the genome stability of aspergilli by using a combination of mutation accumulation (MA) lines and whole genome sequencing.

Results

We sequenced the whole genomes of 30 asexual and 10 sexual MA lines of three Aspergillus species (A. flavus, A. fumigatus and A. nidulans) and estimated that each MA line accumulated mutations for over 4000 mitoses during asexual cycles. We estimated mutation rates of 4.2 × 10⁻¹¹ (A. flavus), 1.1 × 10⁻¹¹ (A. fumigatus) and 4.1 × 10⁻¹¹ (A. nidulans) per site per mitosis, suggesting that the genomes are very robust. Unexpectedly, we found a very high rate of GC → TA transversions only in A. flavus. In parallel, 30 asexual lines of the non-homologous end-joining (NHEJ) mutants of the three species were also allowed to accumulate mutations for the same number of mitoses. Sequencing of these NHEJ MA lines gave an estimated mutation rate of 5.1 × 10⁻¹¹ (A. flavus), 2.2 × 10⁻¹¹ (A. fumigatus) and 4.5 × 10⁻¹¹ (A. nidulans) per base per mitosis, which is slightly higher than in the wild-type strains and some ~ 5–6 times lower than in the yeasts. Additionally, in A. nidulans, we found a NHEJ-dependent interference of the sexual cycle that is independent of the accumulation of mutations.

Conclusions

We present for the first time direct counts of the mutation rate of filamentous fungal species and find that Aspergillus genomes are very robust. Deletion of the NHEJ machinery results in a slight increase in the mutation rate, but at a rate we suggest is still safe to use for biotechnology purposes. Unexpectedly, we found GC→TA transversions predominated only in the species A. flavus, which could be generated by the hepatocarcinogen secondary metabolite aflatoxin. Lastly, a strong effect of the NHEJ mutation in self-crossing was observed and an increase in the mutations of the asexual lines was quantified.

Advances in targeting and heterologous expression of genes involved in the synthesis of fungal secondary metabolites

The revolutionary discovery of penicillin only marks the start of our exploration for valuable fungal natural products. Advanced genome sequencing technologies have translated the fungal genome into a huge reservoir of "recipes" - biosynthetic gene clusters (BGCs) - for biosynthesis. Studying complex fungal genetics demands specific gene manipulation strategies. This review summarizes the current progress in efficient gene targeting in fungal cells and heterologous expression systems for expressing fungal BGCs of fungal secondary metabolites.

The Myosin Motor Domain-Containing Chitin Synthases Are Involved in Cell Wall Integrity and Sensitivity to Antifungal Proteins in Penicillium digitatum

Penicillium digitatum is the main postharvest pathogen of citrus fruit and is responsible for important economic losses in spite of the massive use of fungicides. The fungal cell wall (CW) and its specific component chitin are potential targets for the development of new antifungal molecules. Among these are the antifungal peptides and proteins that specifically interact with fungal CW. Chitin is synthesized by a complex family of chitin synthases (Chs), classified into up to eight classes within three divisions. Previously, we obtained and characterized a mutant of P. digitatum in the class VII gene (ΔchsVII), which contains a short myosin motor-like domain (MMD). In this report, we extend our previous studies to the characterization of mutants in chsII and in the gene coding for the other MMD-Chs (chsV), and study the role of chitin synthases in the sensitivity of P. digitatum to the self-antifungal protein AfpB, and to AfpA obtained from P. expansum. The ΔchsII mutant showed no significant phenotypic and virulence differences with the wild type strain, except in the production and morphology of the conidia. In contrast, mutants in chsV showed a more dramatic phenotype than the previous ΔchsVII, with reduced growth and conidial production, increased chitin content, changes in mycelial morphology and a decrease in virulence to citrus fruit. Mutants in chsVII were specifically more tolerant than the wild type to nikkomycin Z, an antifungal inhibitor of chitin biosynthesis. Treatment of P. digitatum with its own antifungal protein AfpB resulted in an overall reduction in the expression of the chitin synthase genes. The mutants corresponding to MMD chitin synthases exhibited differential sensitivity to the antifungal proteins AfpA and AfpB, ΔchsVII being more susceptible than its parental strain and ΔchsV being slightly more tolerant despite its reduced growth in liquid broth. Taking these results together, we conclude that the MMD-containing chitin synthases affect cell wall integrity and sensitivity to antifungal proteins in P. digitatum.

Cell surface display of proteins on filamentous fungi

Protein display approaches have been useful to endow the cell surface of yeasts with new catalytic activities so that they can act as enhanced whole-cell biocatalysts. Despite their biotechnological potential, protein display technologies remain poorly developed for filamentous fungi. The lignocellulolytic character of some of them coupled to the cell surface biosynthesis of valuable molecules by a single or a cascade of several displayed enzymes is an appealing prospect. Cell surface protein display consists in the co-translational fusion of a functional protein (passenger) to an anchor one, usually a cell-wall-resident protein. The abundance, spacing, and local environment of the displayed enzymes-determined by the relationship of the anchor protein with the structure and dynamics of the engineered cell wall-are factors that influence the performance of display-based biocatalysts. The development of protein display strategies in filamentous fungi could be based on the field advances in yeasts; however, the unique composition, structure, and biology of filamentous fungi cell walls require the customization of the approach to those microorganisms. In this prospective review, the cellular bases, the design principles, and the available tools to foster the development of cell surface protein display technologies in filamentous fungi are discussed.

CRISPR/Cas9-Based Genome Editing in the Filamentous Fungus Fusarium fujikuroi and Its Application in Strain Engineering for Gibberellic Acid Production

The filamentous fungus Fusarium fujikuroi is well-known for its production of natural plant growth hormones: a series of gibberellic acids (GAs). Some GAs, including GA1, GA3, GA4, and GA7, are biologically active and have been widely applied in agriculture. However, the low efficiency of traditional genetic tools limits the further research toward making this fungus more efficient and able to produce tailor-made GAs. Here, we established an efficient CRISPR/Cas9-based genome editing tool for F. fujikuroi. First, we compared three different nuclear localization signals (NLS) and selected an efficient NLS from histone H2B (HTB_NLS) to enable the import of the Cas9 protein into the fungal nucleus. Then, different sgRNA expression strategies, both in vitro and different promoter-based in vivo strategies, were explored. The promoters of the U6 small nuclear RNA and 5S rRNA, which were identified in F. fujikuroi, had the highest editing efficiency. The 5S rRNA-promoter-driven genome editing efficiency reached up to 79.2%. What's more, multigene editing was also explored and showed good results. Finally, we used the developed genome editing tool to engineer the metabolic pathways responsible for the accumulation of a series GAs in the filamentous fungus F. fujikuroi, and successfully changed its GA product profile, from GA3 to tailor-made GA4 and GA7 mixtures. Since these mixtures are more efficient for agricultural use, especially for fruit growth, the developed strains will greatly improve industrial GA production.

Universal plasmids to facilitate gene deletion and gene tagging in filamentous fungi

Gene manipulation is an important routine technique and its efficiency is often a rate-limiting step in research. To facilitate gene manipulation in filamentous fungi, we adapted the S. cerevisiae Gene Deletion and Gene Tagging plasmid collections to include additional selectable markers that make the useful resources applicable to other fungi. Three markers for auxotrophic selection in Aspergillus and related species (the riboB, pyroA and pyrG genes of Aspergillus fumigatus) and a dominant selectable marker for glufosinate resistance (the Bar gene from Streptomyces hygroscopicus) were introduced to the collections. A total of fifty-six plasmids were constructed for all combinations between the four new markers and thirteen epitope tags (viz., 3xHA, 13xMYC, 3xFLAG, FLAG, MYC, T7, HIS, Strep, S, HSV, VSV-G, V5 and GFP). The selectable marker and epitope tag cassettes are positioned between two universal sequences in the plasmids, and therefore, can be amplified by PCR using the same pair of primers. With these plasmids, we have also established a simple and efficient procedure for making gene deletion and gene tagging transformation DNA constructs. The procedure, along with the universal flanking sequences, allows quick and easy interchange of selectable marker and epitope cassettes in transformation DNA constructs for different selection and/or tagging. To demonstrate utility and efficiency of the system, we simultaneously performed C-terminal tagging of HapB - a subunit of the highly conserved Aspergillus nidulans CCAAT binding complex that plays important transcriptional regulatory roles - using ten different epitopes in order to identify those neutral to HapB function in vivo. It is expected that the expanded plasmid collections coupled with the simple construction strategy would facilitate gene manipulation in many fungal species.

CtIP fusion to Cas9 enhances transgene integration by homology-dependent repair

In genome editing with CRISPR-Cas9, transgene integration often remains challenging. Here, we present an approach for increasing the efficiency of transgene integration by homology-dependent repair (HDR). CtIP, a key protein in early steps of homologous recombination, is fused to Cas9 and stimulates transgene integration by HDR at the human AAVS1 safe harbor locus. A minimal N-terminal fragment of CtIP, designated HE for HDR enhancer, is sufficient to stimulate HDR and this depends on CDK phosphorylation sites and the multimerization domain essential for CtIP activity in homologous recombination. HDR stimulation by Cas9-HE, however, depends on the guide RNA used, a limitation that may be overcome by testing multiple guides to the locus of interest. The Cas9-HE fusion is simple to use and allows obtaining twofold or more efficient transgene integration than that with Cas9 in several experimental systems, including human cell lines, iPS cells, and rat zygotes.

Deletion of TpKu70 facilitates gene targeting in Talaromyces pinophilus and identification of TpAmyR involvement in amylase production

Talaromyces pinophilus is a promising filamentous fungus for industrial production of biomass-degrading enzymes used in biorefining, and its genome was recently sequenced and reported. However, functional analysis of genes in T. pinophilus is rather limited owing to lack of genetic tools. In this study, a putative TpKu70 encoding the Ku70 homolog involved in the classic non-homologous end-joining pathway was deleted in T. pinophilus 1-95. ΔTpKu70 displayed no apparent defect in vegetative growth and enzyme production, and presented similar sensitivity to benomyl, bleomycin, and UV, when compared with the wild-type T. pinophilus strain 1-95. Seven genes that encode putative transcription factors, including TpAmyR, were successfully knocked out in ΔTpKu70 at 61.5-100% of homologous recombination frequency, which is significantly higher than that noted in the wild-type. Interestingly, ΔTpAmyR produced approximately 20% of amylase secreted by the parent strain ΔTpKu70 in medium containing soluble starch from corn as the sole carbon source. Real-time quantitative reverse transcription PCR showed that TpAmyR positively regulated the expression of genes encoding α-amylase and glucoamylase. Thus, this study provides a useful tool for genetic analysis of T. pinophilus, and identification of a key role for the transcription factor TpAmyR in amylase production in T. pinophilus.

Deletion of ligD significantly improves gene targeting frequency in the lignocellulolytic filamentous fungus Penicillium oxalicum

To improve the gene targeting frequency (GTF) in the lignocellulolytic filamentous fungus Penicillium oxalicum HP7-1, the non-homologous end-joining (NHEJ) gene ligD was deleted. The obtained PoligD deletion mutant ΔPoligD showed no apparent defect in cellulase production, growth rate, and sensitivity towards osmotic stress and mutagen ethyl methanesulphonate (EMS), while increased sensitivity to high concentrations of methyl methanesulfonate (MMS). Deletion of PoligD gene resulted in significantly increased GTFs at three different loci in P. oxalicum, which are even higher than those in Poku70 deletion mutant. The GTF in ΔPoligD at PoargB (reached 97 %) and PoagaA (reached 90 %) loci increased 5.1- and 1.2-fold compared with that in wild-type strain (WT), while at the Podpp4 locus GTF was up to 27 % in ΔPoligD but close to 0 % in WT, with 0.5 kb homologous flanking regions. Furthermore, the argB and agaA nutritional selection in P. oxalicum was demonstrated and the PoargB and PoagaA genes could be used as selective markers in this fungus. Thus, the PoligD deletion mutant can be an important tool for the functional analysis of genes in P. oxalicum.