Physiological response dynamics of the brown tide organism Aureococcus anophagefferens treated with modified clay

The molecular mechanisms and environmental effects of modified clay control algal blooms in aquacultural water

Modified clay (MC) technology is an effective method for controlling harmful algal blooms (HABs). Based on field experience, a bloom does not continue after treatment with MC, even though the residual HAB biomass accounts for 20-30% of the initial biomass. Laboratory studies using unialgal cultures have found that MC could inhibit the growth of the residual algal cells to prevent HABs. Nevertheless, the phytoplankton in field waters is diverse. Therefore, unclassified complex mechanisms may exist. To illustrate the molecular mechanisms through which MC controls HABs in the field and verify the previous laboratory findings, a series of experiments and bioinformatics analyses were conducted using bloom waters from aquacultural ponds. The results showed that a 72.29% removal efficiency of algal biomass could effectively control blooms. The metatranscriptomic results revealed that the number of downregulated genes (131,546) was greater than that of upregulated genes (24,318) at 3 h after MC addition. Among these genes, several genes related to DNA replication were downregulated; however, genes involved in DNA repair were upregulated. Metabolism-related pathways were the most significantly upregulated (q < 0.05), including photosynthesis and oxidative phosphorylation. The results also showed that MC reduced most of the biomass of the dominant phytoplankton species, likely by removing apical dominance, which increased the diversity and stability of the phytoplankton community. In addition to reducing the pathogenic bacterial density, MC reduced the concentrations of PO₄^3- (96.22%) and SiO₃^2- (66.77%), thus improving the aquaculture water quality, altering the phytoplankton community structure (the proportion of Diatomea decreased, and that of Chlorophyta increased), and inhibiting phytoplankton growth. These effects hindered the rapid development of large phytoplankton biomasses and allowed the community structure to remain stable, reducing HAB threats. This study illustrates the molecular mechanisms through which MC controls HABs in the field and provides a scientific method for removing HABs in aquacultural waters.

Effects of modified clay on the formation of Phaeocystis globosa colony revealed by physiological and transcriptomic analyses

The harmful algal bloom (HAB) species Phaeocystis globosa is commonly observed in global temperate and tropical oceans, and colonies of P. globosa exhibit a dominant morphotype during blooms. The use of polyaluminium chloride modified clay (PAC-MC) is an effective mitigation strategy for P. globosa blooms. Although previous studies have found that PAC-MC can stimulate P. globosa colony formation at low concentrations and inhibit it at higher concentrations, the underlying mechanisms of these effects are poorly understood. Here, we comprehensively compared the physiochemical indices and transcriptomic response of residual P. globosa cells after treatment with two concentrations of PAC-MC. The results showed that PAC-MC induced oxidative stress, photosynthetic inhibition, and DNA damage in residual cells. Moreover, it could activate antioxidant responses and enhance the repair of photosynthetic structure and DNA damage in cells. The biosynthesis of polysaccharides was enhanced and genes associated with cell motility were down-regulated after treatment with PAC-MC, resulting in the accumulation of colonial matrixes. After treatment with a low concentration of PAC-MC (0.1 g/L), the residual cells were slightly stressed, including physical damage, oxidative stress and other damage, and polysaccharide synthesis was enhanced to promote colony formation to alleviate environmental stress. Moreover, the damage to residual cells was slight; thus, normal cell function provided abundant energy and matter for colony formation. After treatment with a high concentration of PAC-MC (0.5 g/L), the residual cells suffered severe damage, which disrupted normal physiological processes and inhibited cell proliferation and colony formation. The present study elucidated the concentration-dependent mechanism of PAC-MC affecting the formation of P. globosa colonies and provided a reference for the application of PAC-MC to control P. globosa blooms.

Assessing the Effect of Modified Clay on the Toxicity of Karenia mikimotoi Using Marine Medaka (Oryzias melastigma) as a Model Organism

Blooms of the toxic dinoflagellate Karenia mikimotoi could threaten the survival of marine life, and modified clay (MC) is considered a promising method for the control of harmful algal blooms. Here, using marine medaka as the model organism, the toxicity of K. mikimotoi before and after MC disposal was investigated. The results showed that only a certain density of intact K. mikimotoi cells could cause obvious damage to fish gills and lead to rapid death. A systematic analysis of morphology, physiology, and molecular biology parameters revealed that the fish gills exhibited structural damage, oxidative damage, osmotic regulation impairment, immune response activation, and signal transduction enhancement. MC can flocculate K. mikimotoi rapidly in water and reduce its toxicity by reducing the density of intact algae cells and hemolytic toxicity. The results indicate that MC is an effective and safe method for controlling K. mikimotoi blooms.

Effects of soluble organics on the settling rate of modified clay and development of improved clay formulations for harmful algal bloom control

For many years, the dispersal of modified clay (MC) has been used to control harmful algal blooms (HABs) in coastal waters of China. MC flocculation efficiency can be influenced by many factors in variable and complex natural environments, including high concentrations of dissolved organic matter (DOM) in the water to be treated. Since many HABs occur in nearshore waters where DOM concentrations are high, this is a significant problem that requires urgent attention. This study involved the use of humic acid as a representative form of DOM to study the influence of organic matter on the MC flocculation process. At high concentrations, humic acid was adsorbed onto MC particles, resulting in a decrease in surface potential and an increase in electrostatic repulsion between the clay particles; this decreased the MC settling rate and increased the water clarification time. Flocs were characterized by their relatively small particle size, high particle concentration, and low collision efficiency, which together resulted in slow clarification of the water after MC spraying. Based on the mechanism of the DOM-MC interaction and combined with the Derjaguin-Landau-Verwey-Overbeek theory and theoretical considerations of clay surface modification, the "ionic atmosphere compression" method was used to improve MC flocculation efficiency in high-organic water. This method increased the ionic strength of the clay stock solution by adding salt, thereby compressing the ionic atmosphere of MC particles and lowering the potential barrier, allowing the MC particles in the treated water to flocculate rapidly and form large flocs, followed by further floc growth and rapid settling via differential sedimentation. The settling rate of MCs improved by a factor of two and the removal efficiency of the HAB cells increased by 7-28%. This study provides important baseline information that will extend the application of MC to HAB control in water bodies with high organic loadings.

Programmed cell death induced by modified clay in controlling Prorocentrum donghaiense bloom

Modified clay (MC), an effective material used for the emergency elimination of algal blooms, can rapidly reduce the biomass of harmful algal blooms (HABs) via flocculation. After that, MC can still control bloom population through indirect effects such as oxidative stress, which was initially proposed to be related to programmed cell death (PCD) at molecular level. To further study the MC induced cell death in residual bloom organisms, especially identifying PCD process, we studied the physiological state of the residual Prorocentrum donghaiense. The experimental results showed that flocculation changed the physiological state of the residual cells, as evidenced by growth inhibition and increased reactive oxygen species production. Moreover, this research provides biochemical and ultrastructural evidence showing that MC induces PCD in P. donghaiense. Nuclear changes were observed, and increased caspase-like activity, externalization of phosphatidylserine and DNA fragmentation were detected in MC-treated groups and quantified. And the mitochondrial apoptosis pathway was activated in both MC-treated groups. Besides, the features of MC-induced PCD in a unicellular organism were summarized and its concentration dependent manner was proved. All our preliminary results elucidate the mechanism through which MC can further control HABs by inducing PCD and suggest a promising application of PCD in bloom control.

Mechanism by Which MC Controls Harmful Algal Blooms Revealed by Cell Morphology of Aureococcus anophagefferens

On the basis of field experience, a bloom does not continue after treatment with modified clay (MC), even though the residual harmful algal bloom (HAB) biomass accounts for 20–30% of the initial cells. This interesting phenomenon indicates that, in addition to causing flocculation, MC can inhibit the growth of residual cells. Here, from a cell morphology perspective, Aureococcus anophagefferens was used as a model organism to explore this scientific issue and clarify the mechanism by which MC mitigates harmful algal blooms (HABs). The results showed that, at an ~70% removal efficiency, neutral clay (NC) could not effectively inhibit the growth of residual cells, although it caused various forms of damage to residual cells, such as cell deformation, cell breakage, decreased extracellular polysaccharides (EPS), increased cell membrane permeability, and increased cytoplasmic granularity, due to physical collisions. After modification, some physical and chemical properties of the clay particle surface were changed; for example, the surface electrical properties changed from negative to positive, lamellar spacing increased, hardness decreased, adhesion chains increased, adhesion improved, and the number of absorption sites increased, enhancing the occurrence of chemical and electrochemical effects and physical collisions with residual cells, leading to severe cell deformation and chemical cell breakage. Thus, MC effectively inhibited the growth of residual cells and controlled HABs.

Effects of Modified Clay on Phaeocystis globosa Growth and Colony Formation

Phaeocystis globosa is a globally distributed harmful algal blooms (HABs) species dominated by the colonial morphotype, which presents dramatic environmental hazards and poses a threat to human health. Modified clay (MC) can effectively flocculate HAB organisms and prevent their subsequent growth, but the effects of MC on colony-dominated P. globosa blooms remain uncertain. In this paper, a series of removal and incubation experiments were conducted to investigate the growth, colony formation and colony development of P. globosa cells after treatment with MC. The results show that the density of colonies was higher at MC concentrations below 0.2 g/L compared to those in the control, indicating the role of P. globosa colonies in resistance to environmental stress. Concentrations of MC greater than 0.2 g/L could reduce the density of solitary cells and colonies, and the colony diameter and extracellular polysaccharide (EPS) content were also decreased. The adsorption of MC to dissolved inorganic phosphorus (DIP) and the cell damage caused by collision may be the main mechanisms underlying this phenomenon. These results elucidate that the treatment with an appropriate concentration of MC may provide an effective mitigation strategy for P. globosa blooms by preventing their growth and colony formation.