Kinetic modelling of polyphenol degradation during common beans soaking and cooking

Modifying of non-nutritional compounds in legumes: Processing strategies and new technologies

Legumes are consumed worldwide, are notable for their nutritional quality, however, contain certain non-nutritional compounds (NNCs) that can affect the absorption of nutrients, though these may exhibit bioactive properties. Various processing methods can modify the concentration of NNCs, including soaking and germination. These methods can be combined with other thermal, non-thermal, and bioprocessing treatments to enhance their efficiency. The efficacy of these methods is contingent upon the specific types of NNCs and legume in question. This work examines the effectiveness of these processing methods in terms of modifying the concentration of NNCs present in legumes as well as the potential use of emerging technologies, to enhance the level of NNCs modification in legumes. These technologies could increase the functional use of legume flours, potentially leading to new opportunities for incorporating legume-based ingredients in a range of culinary applications, thereby enhancing the diets of many individuals worldwide.

Metabolomics of black beans (Phaseolus vulgaris L.) during atmospheric pressure steaming and in vitro simulated digestion

In the paper, metabolomics techniques based on UHPLC-QE-MS were used to study raw black beans, steaming black beans, and their in vitro digestion products. The results show that the three groups of raw black beans, atmospheric pressure-steamed black beans, and their in vitro digests comprised 922, 945, and 878 characteristic metabolites, respectively, dominated by amino acids, organic acids, polyphenols, and sugars. After screening the differential metabolites, content comparison, the content of amino acids, sugars, and phenolics in black beans was found to be increased after atmospheric steaming. During in vitro digestion, the amino acid content increased and the phenolic content decreased, with amino acid synthesis, phenolic degradation, and conversion predominating. This study provides data to support the changes in black beans metabolites during atmospheric steam processing and in vitro digestion.

Valorization of Legume By-Products Based on Polyphenols and Protein Contents for Potential Nutraceutical Applications

A significant amount of agri-food by-products is generated by large food industry production lines. Aligned with the principles of a circular economy, this project aims to recycle and valorize legumes, such as beans, green beans and soy by-products characterized by different heat treatments, maturation stages and cultivation methods. The valorization of food waste involved the development of an Ultrasound-Assisted Extraction (UAE) method to isolate polyphenols. Analytical techniques, including UHPLC-DAD-ESI-MSn, were used to identify polyphenols in legume, green bean and soy extracts obtained through UAE. Additionally, UV-Vis spectrophotometric assays measured the Total Phenolic Content (TPC) and Total Antioxidant Status (TAS), while the Kjeldahl method was employed to assess the protein content in each UAE extract. The analyses revealed a variety of valuable polyphenols in legume, green bean and soy by-products. For instance, bean by-products contain feruloyl glucaric acid derivatives, green beans by-products have different types of flavonols such as quercetin-3-O-glucuronide, and soy by-products are rich in isoflavones. These findings demonstrate the potential for formulating nutraceuticals from these by-products' extracts.

Integrative metabolomics and chemometrics depict the metabolic alterations of differently processed red kidney beans (Phaseolus vulgaris L.) and in relation to in-vitro anti-diabetic efficacy

Red kidney beans (RKB) serve as a powerhouse packed with a plethora of largely unexplored extraordinary chemical entities with potential significance. However, their nutraceutical applications as a functional hypoglycemic food still lag behind and warrant further investigation. With a scope to optimize chemical and biological traits of RKB, green modification approaches (processing methods) seem inevitable. Accordingly, the current study offered the first integrative workflow to scrutinize dynamic changes in chemical profiles of differently processed RKB and their potential entanglements on diabetes mitigation using Ultra Performance Liquid Chromatography-mass spectrometry (UPLC-MS/MS) coupled with chemometrics. Different physical and biological processing treatments namely germination, fermentation, cooking and dehulling were preliminarily implemented on RKB. Complementarily, the concomitant metabolite alterations among differently processed RKB were monitored and interpreted. Next, an in-vitro α-amylase and α-glycosidase inhibitory testing of the differently processed samples was conducted and integrated with orthogonal projection to latent structures (OPLS) analysis to pinpoint the possible efficacy compounds. A total of 72 compounds spanning fatty acids and their glycerides, flavonoids, phenolic acids, amino acids, dipeptides, phytosterols and betaxanthins were profiled. Given this analysis and compared with raw unprocessed samples, it was found that flavonoids experienced notable accumulation during germination while both fermentation and dehulling approaches sharply intensified the content of amino acids and dipeptides. Comparably, Fatty acids, phytosterols and betaxanthins were unevenly distributed among the comparable samples. Admittedly, OPLS-DA revealed an evident discrimination among the processed samples assuring their quite compositional discrepancies. In a more targeted approach, kaempferol-O-sophoroside, quercetin, carlinoside and betavulgarin emerged as focal discriminators of sprouted samples while citrulline, linoleic acid, linolenoyl-glycerol and stigmasterol were the determining metabolites in cooked samples. Our efficacy experimental findings emphasized that the different RKB samples exerted profound inhibitory actions against both α-amylase and α-glycosidase enzymes with the most promising observations in the case of sprouted and cooked samples. Coincidently, OPLS analysis revealed selective enhancement of possible efficacy constituents primarily citrulline, formononetin, gamabufotalin, kaempferol-O-sophoroside, carlinoside, oleic acid and ergosterol in sprouted and cooked samples rationalizing their noteworthy α-amylase and α-glucosidase inhibitory activities. Taken together, this integrated work provides insightful perspectives beyond the positive impact of different processing protocols on bioactives accumulation and pharmacological traits of RKB expanding their utilization as functional hypoglycemic food to rectify diabetes.

Microwave-Assisted Hydrothermal Processing of Rugulopteryx okamurae

One possible scheme of Rugulopteryx okamurae biomass valorization based on a green, rapid and efficient fractionation technique was proposed. Microwave-assisted pressurized hot water extraction was the technology selected as the initial stage for the solubilization of different seaweed components. Operation at 180 °C for 10 min with a 30 liquid-to-solid ratio solubilized more than 40% of the initial material. Both the alginate recovery yield (3.2%) and the phenolic content of the water-soluble extracts (2.3%) were slightly higher when distilled water was used as solvent. However, the carbohydrate content in the extract (60%) was similar for both solvents, but the sulfate content was higher for samples processed with salt water collected from the same coast as the seaweeds. The antiradical capacity of the extracts was related to the phenolic content in the extracts, but the cytotoxicity towards HeLa229 cancer cells was highest (EC50 = 48 µg/mL) for the extract obtained with distilled water at the lowest temperature evaluated. Operation time showed a relevant enhancement of the extraction performance and bioactive properties of the soluble extracts. The further fractionation and study of this extract would be recommended to extend its potential applications. However, due to the low extraction yield, emphasis was given to the solid residue, which showed a heating value in the range 16,102-18,413 kJ/kg and could be useful for the preparation of biomaterials according to its rheological properties.

Plant-based milk: unravel the changes of the antioxidant index during processing and storage - a review

As a nutrient rich emulsion extracted from plant materials, plant-based milk (PBM) has been the latest trend and hot topic in the food industry due to the growing awareness of consumers toward plant-based products in managing the environmental (carbon footprint and land utility), ethical (animal well-fare) and societal (health-conscious) issues. There have been extensive studies and reviews done to discuss the distinct perspective of PBM including its production, health effects and market acceptance. However, not much has been emphasized on the valuable antioxidants present in PBM which is one of the attributes making them stand apart from dairy milk. The amounts of antioxidants in PBM are important. They offered tremendous health benefits in maintaining optimum health and reducing the risk of various health disorders. Therefore, enhancing the extraction of antioxidants and preserving their activity during production and storage is important. However, there is a lack of a comprehensive review of how these antioxidants changes in response to different processing steps involved in PBM production. Presumably, antioxidants in PBM could be potentially lost due to thermal degradation, oxidation or leaching into processing water. Hence, this paper aims to fill the gaps by addressing an extensive review of how different production steps (germination, roasting, soaking, blanching, grinding and filtration, and microbial inactivation) affect the antioxidant content in PBM. In addition, the effect of different microbial inactivation treatments (thermal or non-thermal processing) on the alteration of antioxidant in PBM was also highlighted. This paper can provide useful insight for the industry that aims in selecting suitable processing steps to produce PBM products that carry with them a health declaration.

Modelling of the nutritional behaviour of cowpea seeds during soaking, germination and cooking process

Two modelling approaches previously developed and describing separately the diffusion-reaction of folates and alpha-galactosides during cowpea seed soaking, germination and cooking processes were combined here to simulate the effect of some key processing parameters on the nutritional value of cowpea seeds. The simulator was upgraded, considering thermal-pH dependency of both diffusivities and reactivities of folates and alpha-galactosides together with water-to-seed ratio and starch gelatinization. The simulations showed that soaking and cooking processes were deleterious for folates whereas germination promoted the production of folates while reducing alpha-galactosides concentration. This study suggests that a long germination (96 h), followed by a short cooking seems to be optimal both in terms of nutritional value and degree of cooking.

Enzyme and Antioxidant Activities of Malted Bambara Groundnut as Affected by Steeping and Sprouting Times

Bambara groundnut (BGN) is termed a complete food due to its nutritional composition and has been researched often for its nutritional constituents. Malting BGN seeds have shown improved nutritional and functional characteristics, which can be used to produce an amylase-rich product as a functional ingredient for food and beverage production in homes and industries. The aim of this study was to investigate the enzyme and antioxidant activities of malted BGN affected by steeping and sprouting times. BGN was malted by steeping in distilled water at 25-30 °C for 36 and 48 h and then sprouted for 144 h at 30 °C. Samples were drawn every 24 h for drying to study the effect of steeping and sprouting times on the moisture, sprout length, pH, colour, protein content, amylase, total polyphenols, and antioxidant activities of the BGN seeds. The steeping and sprouting times significantly affected the BGN malt colour quality and pH. The protein content of the malted BGN seeds was not significantly different based on steeping and sprouting times. Steeping and sprouting times significantly affected the α- and β-amylase activities of the BGN seeds. The activity of amylases for 36 and 48 h steeping times were 0.16 and 0.15 CU/g for α-amylase and were 0.22 and 0.23 BU/g for β-amylase, respectively. Amylase-rich BGN malt was produced by steeping for 36 h and sprouting for 96 h. Amylase-rich BGN malt can be useful as a functional food ingredient in food and beverage formulations.

Evaluating the Performances of Interval Starting Accessibility Drying (ISAD) through Protein and Total Polyphenol Contents of Blue Crabmeat (Portunus segnis)

Blue crab (Portunus segnis) proliferation on Tunisian coasts started in 2014/2015. It has heavily impacted the balance of other species, local biodiversity, and fishing activity. Limiting these drawbacks may be achieved through ways promoting crabmeat. For this purpose, two different drying modes were tested: Conventional convective drying (CCD) and interval starting accessibility drying (ISAD) under 45 °C and relative humidity of 40%. Several air velocities were assayed under CCD: 1.5, 2.5, 3.5, and 5 m.s−1. Two different ISAD tests were run with different time-related conditions: drying period of 15 s and tempering period of 15 or 60 s. Drying modes and operating conditions performances were compared through proteins and total polyphenol contents (TPCs) evolution during the treatment. Important polyphenol and protein losses were observed between raw and processed crabmeat. Airflow velocities have a significant effect on crabmeat quality preservation. ISAD method under 15 s/60 s allowed the best preservation of these quality parameters. TPC and proteins losses and kinetics during drying under CCD or ISAD were modelled and correlations were established between the quality parameters, the residual water content at all drying times, and the evaporation rate.

Olive Oil Dregs as a Novel Source of Natural Antioxidants: Extraction Optimization towards a Sustainable Process

Olive oil dregs (OOD), which are an underutilized by-product from oil mills, were used for the extraction of antioxidant compounds. The residues from three oil mills located in Campania (Southern Italy) were extracted with acidified methanol, and hydroxytyrosol (HT) was the main phenolic compound detected. Total phenolic content (TPC) and HT amount were measured. EVO Campania oil mill provided the residue with the highest TPC and HT quantities: 6.801 ± 0.159 mg Gallic Acid Equivalents (GAE)/g OOD and 519.865 ± 9.082 μg/g OOD, respectively. Eco-friendly extractions at different temperatures and times were performed on EVO Campania OOD, obtaining 9.122 ± 0.104 mg GAE/g OOD and 541.330 ± 64.087 μg/g OOD for TPC and HT, respectively, at 121 °C for 60 min. Radical Scavenging Activity (RSA), Superoxide Scavenging Activity (SSA), and Ferric Reducing Antioxidant Power (FRAP) were measured in OOD aqueous extracts. Extract prepared at 37 °C for 60 min showed the greatest RSA and SSA values (44.12 ± 1.82 and 75.72 ± 1.78, respectively), whereas extract prepared at 121 °C for 60 min exhibited the highest FRAP value (129.10 ± 10.49 μg Ascorbic Acid Equivalents (AAE)/mg). OOD extracts were able to protect sunflower oil from oxidation for 4 weeks at 65 °C. The overall results suggest that this novel residue can be usefully valorized by providing HT-rich extracts to use as antioxidant agents.

Effect of Food Processing on Antioxidant Potential, Availability, and Bioavailability

Antioxidants are understood to play a key role in disease prevention; because of this, research and interest in these compounds are ever increasing. Antioxidative phytochemicals from natural sources are preferred, as some negative implications have been associated with synthetic antioxidants. Beans, nuts, seeds, fruits, and vegetables, to name a few, are important sources of phytochemicals, which have purported health benefits. The aforementioned plant sources are reportedly rich in bioactive compounds, most of which undergo some form of processing (boiling, steaming, soaking) prior to consumption. This article briefly reviews selected plants (beans, nuts, seeds, fruits, and vegetables) and the effects of processing on the antioxidant potential, availability, and bioavailability of phytochemicals, with research from our laboratory and other studies determining the health benefits of and processing effects on bioactive compounds.

Bean phenolic compound changes during processing: Chemical interactions and identification

The common bean (Phaseolus vulgaris L.) represents one of the main crops for human consumption, due to its nutritional and functional qualities. Phenolic compounds have beneficial health effects, and beans are an essential source of these molecules, being found mainly in the seed coat and its color depends on the concentration and type of phenolic compounds present. The bean during storage and processing, such as cooking, germination, extrusion, and fermentation, undergoes physical, chemical, and structural changes that affect the bioavailability of its nutrients; these changes are related to the interactions between phenolic compounds and other components of the food matrix. This review provides information about the identification and quantification of phenolic compounds present in beans and the changes they undergo during processing. It also includes information on the interactions between the phenolic compounds and the components of the bean's cell wall and the analytical methods used to identify the interactions of phenolic compounds with macromolecules.

Characterization and antimicrobial effect of a bioinspired thymol coating formed on titanium surface by one-step immersion treatment

OBJECTIVE

To develop an antimicrobial and anti-adherent thymol (TOH)-containing coating on titanium (Ti) by a bioinspired one-step biocompatible method.

METHODS

A nanolayer of adsorbed TOH (TOH-NL-Ti) was formed by an easy deep coating method on Ti surface. The treatment consists in a simple one-step immersion process in a TOH-containing solution. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), potentiodynamic electrochemical technique, open circuit potential records, Atomic Force Microscopy (AFM) and measurements of TOH release were used to characterize TOH-NL-Ti. Live/Dead staining and plate counting were employed to quantify attached and living adhered bacteria, respectively. Biocompatibility and cytotoxicity in fibroblastic and pre-osteoblastic cell lines were evaluated by acridine orange staining and MTT assay, respectively.

RESULTS

TOH adsorbed on TOH-NL-Ti was detected by ATR-FTIR and electrochemical techniques. ATR-FTIR results showed that TOH nanofilms development involves spontaneous production of ketonic structures on Ti surface. AFM analysis revealed that the thickness of the TOH-NL was below 80 nm. Finally, microbiological assays confirmed that TOH-NL-Ti can inhibit the adhesion and kill attached bacteria leading to the eradication of leaving cells on its surface. After 24 h of biocidal release, the antimicrobial effect is also significant (a decrease of 3 orders in the number of attached bacteria).

SIGNIFICANCE

The formation of TOH-NL-Ti nanolayer is a simple strategy able to be applied by not specially trained personnel, to reduce implant infection risks, ensure highly effective antimicrobial action and inhibition of bacterial adhesion on Ti surfaces without showing toxic effects for pre-osteoblastic and fibroblastic cells.

Effects of drying temperature and relative humidity on the quality of dried onion slice

Onion, a very common season ingredient, is useful as an antioxidant and optimal conditions are required for its drying while ensuring the best quality is retained. This study evaluated the effect of drying temperatures and relative humidity on both drying rate and onion quality. Onions with an average diameter of 20.125 ± 0.025 mm were peeled and sliced into a thickness of 1.233 ± 0.029 mm. They were then dried for 120 min under various temperatures ranging from 40 to 70 °C. Both moisture content and total phenolic compounds were measured and analyzed as responses, and the data obtained were used for estimating the kinetic parameters of drying rate and total phenolic compounds degradation. The results show that the drying kinetics followed Fick's model. Moreover, the total phenolic compounds degradation can be properly expressed using a first-order reaction model, and the optimization using response surface method revealed that the optimum conditions of onion slice drying were achieved at 49.6 °C and relative humidity of 0.65%. These conditions can significantly reduce drying time with phenolic compounds retention of up to 96%.