Polypropylene/lignin blend monoliths used as sorbent in oil spill cleanup

Porous lignin-based composites for oil/water separation: A review

Frequent oceanic oil spill incidents and the discharge of industrial oily wastewaters have caused serious threats to environments, food chains and human beings. Lignin wastes with many reactive groups exist as the byproducts from bioethanol and pulping processing industries, and they are either discarded as wastes or directly consumed as a fuel. To make full use of lignin wastes and simultaneously deal with oily wastewaters, porous lignin-based composites have been rationally designed and prepared. In this review, recent advances in the preparation of porous lignin-based composites are summarized in terms of aerogels, sponges, foams, papers, and membranes, respectively. Then, the mechanisms and the application of porous lignin-based adsorbents and filtration materials for oil/water separation are discussed. Finally, the challenges and perspectives of porous lignin-based composites are proposed in the field of oil/water separation. The utilization of abundant lignin wastes can replace fossil resources, and meanwhile porous lignin-based composites can be used to efficiently treat with oily wastewaters. The above utilization strategy opens an avenue to the rational design and preparation of lignin wastes with high-added value, and gives a possible solution to use lignin wastes in a sustainable and environmentally friendly way.

Preparation of the graphene-based smart hydrophobic nanocomposite and its application in oil/water separation

Designing and synthesizing materials with smart hydrophobicity against an external magnetic field for efficient oil/water separation is of great importance due to the increasing problems caused by oil pollution. Here, the nanocomposites were fabricated based on graphene and different iron oxides exhibit smart hydrophobicity against an external magnetic field and they are in powder form eliminating the requirement for a substrate employing a facile and echo friendly method. The results prove that autoclaving of graphene leads to its ferromagnetic property; then it is attached to iron oxides by magnetic attraction and a nanocomposite is produced. The magnetic property of the resulting nanocomposite is higher than the magnetic property of its individual components. In addition, following nanocomposite formation, its hydrophobicity and surface area also change. FESEM images were taken from the nanocomposites to study their surface morphology, and EDS-MAP analysis to observe the elemental distribution uniformity of the nanocomposites. Also, to measure the surface area and pore size, BET analysis has been performed on pure materials and graphene-black iron oxide nanocomposite (graphene@black iron oxide). The results show that the specific surface area of black iron oxide increases after being composited with graphene dispersed at 5000 rpm. Indeed, graphene forms a composite by binding to iron oxide, and therefore, its specific surface area increases compared to iron oxide and graphene alone. These results show an increase in oil sorption and better separation of oil from water by the prepared nanocomposite. Also, to measure the magnetic properties of pure materials, graphene@black iron oxide, and ferromagnetic graphene at 3000 and 5000 rpm, the Vibrating Sample Magnetometer analysis has been performed. The results have proven that the nanocomposite powder prepared by a simple method obtained from cost-effective and available materials is hydrophobic and becomes more hydrophobic by applying an external magnetic field. Due to the ease with which oil can be readily removed from the nanocomposite by eliminating the external magnetic field, this nanocomposite is an excellent choice for the separation of oil from water.

Development of shelf life-extending packaging for vitamin C syrup based on high-density polyethylene and extracted lignin argan shells

Biobased packaging is an essential parameter in the pharmaceutical industry. In the present work, bio-composites consisting of high-density polyethylene (HDPE) as a matrix and lignin recovered from argan nut shells as filler were developed to investigate their potential use as packaging materials for vitamin C drugs. The lignin was extracted via alkali and klason processes, and the effects of the extraction method as well as the lignin content on the thermal, morphological, mechanical, and rheological properties of the produced composites, as well as their application for vitamin C packaging, were investigated. Among all the prepared packaging materials, the one with desirable results in pH, color stability, hardness, and mechanical characteristics was based on alkali lignin. It achieved its highest Young's modulus enhancement, 10.12 %, at 10 % alkali lignin loading, while the highest yield strain enhancement (4.65 %) was obtained with 2 % loading. When compared to neat HDPE and HDPE/klason lignin packaging materials, vitamin C solutions packed with this composite showed a lower oxidation rate, attributed to the extremely low pH variation and high color stability of the material, which decreased the rate of vitamin C degradation. According to these findings, HDPE/alkali lignin composite is a promising vitamin C syrup packaging material.

Recent Developments and Advancements in Graphene-Based Technologies for Oil Spill Cleanup and Oil-Water Separation Processes

The vast demand for petroleum industry products led to the increased production of oily wastewaters and has led to many possible separation technologies. In addition to production-related oily wastewater, direct oil spills are associated with detrimental effects on the local ecosystems. Accordingly, this review paper aims to tackle the oil spill cleanup issue as well as water separation by providing a wide range of graphene-based technologies. These include graphene-based membranes; graphene sponges; graphene-decorated meshes; graphene hydrogels; graphene aerogels; graphene foam; and graphene-coated cotton. Sponges and aerogels modified by graphene and reduced graphene oxide demonstrated effective oil water separation owing to their superhydrophobic/superoleophilic properties. In addition, oil particles are intercepted while allowing water molecules to penetrate the graphene-oxide-coated metal meshes and membranes thanks to their superhydrophilic/underwater superoleophobic properties. Finally, we offer future perspectives on oil water separation that are hindering the advancements of such technologies and their large-scale applications.

Using polypropylene needle punch nonwoven sorbents as the interceptor for oil in static and dynamic water experiments

This work was to determine the impact of pore size and thickness of sorbents besides the influence of oil properties on the performance of sorbents used as an interceptor barrier for oils in Static and dynamic water experiments. polypropylene needle punch sorbents were used. SEM test showed the porous structure of sorbents. Oil sorption test investigated that with sorbents had same thickness N1 absorbed oil 8.89 g/g of soybean oil and 7.15 g/g of motor oil. Meanwhile, sorbents with the same pore size, N6 absorbed oil 6.11 g/g of soybean oil and 5.13 g/g of motor oil. All sorbents showed a retention rate of over 75% after 24 h of dripping. Dynamic oil spreading revealed that smaller pore size and higher thickness exhibited higher height wicking. The static performance experiment showed motor oil and soybean oil started to leak at 38 and 32 min for N1, then prolonged with reducing pore size with intercepting efficiency around 70% after 600 min for motor oil and 540 min for soybean oil. In comparison, The motor oil and soybean oil started to leak at 49 and 40 min for N4 and then prolonged with increased thickness with intercepting efficiency around 70% after 480 min for motor oil and 360 min for soybean oil. Under the dynamic experiment, oils spilled quicker with initial leakage of sorbents N3 and N6 at rate flow 55.65 ml/s for motor oil and soybean oil were (41 min, 36 min) and (50 min, 41 min) while intercepting efficiency was (99%, 98.40%) and (99.33%, 98.40%).

Polypropylene/Lignin/POSS Nanocomposites: Thermal and Wettability Properties, Application in Water Remediation

Compositing is an interesting strategy that has always been employed to introduce or enhance desired functionalities in material systems. In this paper, sponges containing polypropylene, lignin, and octavinyl-polyhedral oligomeric silsesquioxane (OV-POSS) were successfully prepared via an easy and elegant strategy called thermally induced phase separation (TIPS). To fully explore the behaviour of different components of prepared sponges, properties were characterized by a thermogravimetric analyser (TGA), differential scanning calorimetry (DSC), Fourier transform infrared measurement (FTIR), and scanning electron microscopy (SEM). Furthermore, wettability properties toward an organic liquid and oil were investigated. The FTIR analysis confirmed the chemical modification of the components. TGA and DSC measurements revealed thermal stability was much better with an increase in OV-POSS content. OV-POSS modified sponges exhibited ultra-hydrophobicity and high oleophilicity with water contact angles of more than 125°. The SEM revealed that POSS molecules acted as a support for reduced surface roughness. Moreover, OV-POSS-based blend sponges showed higher sorption capacities compared with other blend sponges without OV-POSS. The new blend sponges demonstrated a potential for use as sorbent engineering materials in water remediation.