Pharmaceutical and drug delivery applications of chitosan biopolymer and its modified nanocomposite: A review

Advancements in the nanodelivery of azole-based fungicides to control oil palm pathogenic fungi

The cultivation of oil palms is of great importance in the global agricultural industry due to its role as a primary source of vegetable oil with a wide range of applications. However, the sustainability of this industry is threatened by the presence of pathogenic fungi, particularly Ganoderma spp., which cause detrimental oil palm disease known as basal stem rot (BSR). This unfavorable condition eventually leads to significant productivity losses in the harvest, with reported yield reductions of 50-80 % in severely affected plantations. Azole-based fungicides offer potential solutions to control BSR, but their efficacy is hampered by limited solubility, penetration, distribution, and bioavailability. Recent advances in nanotechnology have paved the way for the development of nanosized delivery systems. These systems enable effective fungicide delivery to target pathogens and enhance the bioavailability of azole fungicides while minimising environmental and human health risks. In field trials, the application of azole-based nanofungicides resulted in up to 75 % reduction in disease incidence compared to conventional fungicide treatments. These innovations offer opportunities for the development of sustainable agricultural practices. This review highlights the importance of oil palm cultivation concerning the ongoing challenges posed by pathogenic fungi and examines the potential of azole-based fungicides for disease control. It also reviews recent advances in nanotechnology for fungicide delivery, explores the mechanisms behind these nanodelivery systems, and emphasises the opportunities and challenges associated with azole-based nanofungicides. Hence, this review provides valuable insights for future nanofungicide development in effective oil palm disease control.

Sources and Extraction of Biopolymers and Manufacturing of Bio-Based Nanocomposites for Different Applications

In the recent era, bio-nanocomposites represent an emerging group of nanostructured hybrid materials and have been included in a new field at the frontier of materials science, life sciences, and nanotechnology. These biohybrid materials reveal developed structural and functional features of great attention for diverse uses. These materials take advantage of the synergistic assembling of biopolymers with nanometer-sized reinforcements. Conversely, polysaccharides have received great attention due to their several biological properties like antimicrobial and antioxidant performance. They mainly originated in different parts of plants, animals, seaweed, and microorganisms (bacteria, fungi, and yeasts). Polysaccharide-based nanocomposites have great features, like developed physical, structural, and functional features; affordability; biodegradability; and biocompatibility. These bio-based nanocomposites have been applied in biomedical, water treatment, food industries, etc. This paper will focus on the very recent trends in bio-nanocomposite based on polysaccharides for diverse applications. Sources and extraction methods of polysaccharides and preparation methods of their nanocomposites will be discussed.

Adsorption of haem by magnetic chitosan microspheres: Optimal conditions, adsorption mechanisms and density functional theory analyses

Magnetic chitosan microspheres (Al@CTS@Fe3O4) were prepared for haem separation via chemical cross-linking of chitosan, Fe3O4 and AlCl3·6H2O. The properties of the Al@CTS@Fe3O4 microspheres were investigated through techniques including XRD, TEM, FTIR, BET analysis, SEM, TG, VSM, XPS and pHpzc analysis. The haem adsorption of Al@CTS@Fe3O4 was optimized via a Box-Behnken design (BBD) with three operating factors: Fe3O4 dose (0.5-1.3 g), AlCl3·6H2O concentration (0.25-1.25 mol/L) and glutaraldehyde dose (2-6 mL). The optimal haem adsorption effect was achieved with 1.1 g of Fe3O4, 0.75 mol/L AlCl3·6H2O, and 3 mL of glutaraldehyde. The adsorption kinetics and isotherms demonstrated that haem adsorption by the Al@CTS@Fe3O4 microspheres was best described by the pseudo-second-order model. The maximum adsorption capacity is 33.875 mg/g at pH 6. After six adsorption-desorption cycles, the removal of haem still reached 53.83 %. The surface adsorption mechanism of haem on Al@CTS@Fe3O4 can be attributed to electrostatic, hydrogen bonding, and n-π interactions. Thermodynamic calculations indicated that the adsorption process is spontaneous, with the microspheres preferentially accepting electrons and haem preferentially providing electrons. Consequently, the Al@CTS@Fe3O4 microspheres exhibit considerable potential as adsorbents for haem separation.

Polysaccharide-Based Composite Systems in Bone Tissue Engineering: A Review

In recent years, a growing demand for biomaterials has been observed, particularly for applications in bone regenerative medicine. Bone tissue engineering (BTE) aims to develop innovative materials and strategies for repairing and regenerating bone defects and injuries. Polysaccharides, due to their biocompatibility, biodegradability as well as bioactivity, have emerged as promising candidates for scaffolds or composite systems in BTE. Polymers combined with bioactive ceramics can support osteointegration. Calcium phosphate (CaP) ceramics can be a broad choice as an inorganic phase that stimulates the formation of new apatite layers. This review provides a comprehensive analysis of composite systems based on selected polysaccharides used in bone tissue engineering, highlighting their synthesis, properties and applications. Moreover, the applicability of the produced biocomposites has been analyzed, as well as new trends in modifying biomaterials and endowing them with new functionalizations. The effects of these composites on the mechanical properties, biocompatibility and osteoconductivity were critically analyzed. This article summarizes the latest manufacturing methods as well as new developments in polysaccharide-based biomaterials for bone and cartilage regeneration applications.

Modification of physicochemical properties of chitosan to improve its pharmaceutical and agrochemical potential applications

Chitosan has received much more attention as a functional biopolymer with applications in pharmaceuticals, agricultural, drug delivery systems and cosmetics. The objectives of present investigation were to carry out modification of chitosan for enhancement of aqueous solubility, which will impart increased solubility and dissolution rate of poorly soluble drug itraconazole (ITZ) and also evaluate the modified chitosan for soyabean seed germination studies. The modification of chitosan was accomplished through the antisolvent precipitation method; employing five carboxylic acids. The resulting products were assessed for changes in molecular weight, degree of deacetylation, solubility and solid state characterization. Subsequently, the modified chitosan was complexed with itraconazole using the co-grinding technique. The prepared formulations were evaluated for solubility, FTIR (Fourier-transform infrared spectroscopy), PXRD (Powder X-ray diffraction), in-vitro dissolution studies. Furthermore the effect of modified chitosan has been evaluated on soybean seed germination. Results demonstrated that, modified chitosan improves self and solubility of itraconazole by six folds. As there was increased degree of deacetylation of chitosan leads to improvement in solubility. The results of FTIR showed the slight shifting of peaks in co-grind formulations of itraconazole. Formulations showed reduction in crystallinity of drug which leads to enhancement in dissolution rate as compared to pure itraconazole. Retention of property of seed germination was observed with modified chitosan at optimum concentration of 3 % w/v, with benefit of enhanced aqueous solubility of chitosan. This positive result paves the way for the advancement of pharmaceutical and agrochemical products employing derivatives of chitosan.

Recent progress of electrospun nanofibers as burning dressings

Burns are a global public health problem, which brings great challenges to public health and the economy. Severe burns often lead to systemic infection, shock, multiple organ failure, and even death. With the increasing demand for the therapeutic effect of burn wounds, traditional dressings have been unable to meet people's needs due to their single function and many side effects. In this context, electrospinning shows a great prospect on the way to open up advanced wound dressings that promote wound repairing and prevent infection. With its large specific surface area, high porosity, and similar to natural extracellular matrix (ECM), electrospun nanofibers can load drugs and accelerate wound healing. It provides a promising solution for the treatment and management of burn wounds. This review article introduces the concept of burn and the types of electrospun nanofibers, then summarizes the polymers used in electrospun nanofiber dressings. Finally, the drugs (plant extracts, small molecule drugs and nanoparticles) loaded with electrospun burn dressings are summarized. Some promising aspects for developing commercial electrospun burn dressings are proposed.

Preparation of chitosan nanoparticles loaded with Balanites aegyptiaca extract for treatment of streptozotocin-induced diabetes in rats

Diabetes mellitus is characterized by elevated blood sugar level due to a deficiency in insulin production and/or action. Balanites aegyptiaca (BA) has been employed as a hypoglycemic medication. Nanoparticles (NPs) have many advantages like minimized drug dose, sustainable drug release, maximized bioavailability and delivery of drugs. The study aimed to synthesize novel chitosan (CS) NPs loaded with BA extract (BA Ex). The prepared NPs were examined in treatment of streptozotocin-induced diabetes in rats. The anti-diabetic efficiency was evaluated through measuring of levels of blood glucose, insulin, lipid profile, oxidative stress markers, pro-inflammatory cytokines. GC-MS, HPLC and ICP techniques showed the presence of numerous bioactive components that have an anti-diabetic effectiveness. BA Ex-CS NPs succeeded in treatment of diabetes; where, it increased insulin secretion, lowered both FBG and FTA levels and helped in neogenesis of pancreatic islets beta cells. The regenerative activity of BA Ex-CS NPs is attributed to its high antioxidant and anti-inflammatory properties. This antioxidant activity scavenged the generated free radicles that resulted from STZ administration. CS NPs raised the plant extract efficacy, prevented its degradation, and regulated the release of its components. The delivery of BA Ex bioactive components has been revolutionized by CS NPs.

Trends in biopolymer science applied to cosmetics

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules.

Synthesis and Characterization of Antibacterial Chitosan Films with Ciprofloxacin in Acidic Conditions

This work presents the results of research on obtaining chitosan (CS) films containing on their surface ciprofloxacin (CIP). A unique structure was obtained that not only gives new properties to the films, but also changes the way of coverage and structure of the surface. The spectroscopic test showed that in the process of application of CIP on the surface of CS film, CIP was converted from its crystalline form to an amorphic one, hence improving its bioavailability. This improved its scope of microbiological effect. The research was carried out on the reduction of CIP concentration during the process of CIP adhesion to the surface of chitosan films. The antibacterial activity of the CS films with and without the drug was evaluated in relation to Escherichia coli and Staphylococcus aureus, as well as Candida albicans and Penicillium expansum. Changes in the morphology and roughness of membrane surfaces after the antibacterial molecule adhesion process were tested with atomic force microscopy (AFM) and scanning electron microscopy (SEM). Structural analysis of CS and its modifications were confirmed with Fourier-transform spectroscopy in the infrared by an attenuated total reflectance of IR radiation (FTIR-ATR) and solid-state nuclear magnetic resonance (NMR).

Insulin-Loaded Soybean Trypsin Inhibitor-Chitosan Nanoparticles: Preparation, Characterization, and Protective Effect Evaluation

The aim of this work was to prepare insulin-loaded nanoparticles using soybean trypsin inhibitor (STI) and chitosan (CS) as a potential coating. The nanoparticles were prepared by complex coacervation, and characterized for their particle size, polydispersity index (PDI), and encapsulation efficiency. In addition, the insulin release and enzymatic degradation of nanoparticles in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) were evaluated. The results showed that the optimal conditions for preparing insulin-loaded soybean trypsin inhibitor-chitosan (INs-STI-CS) nanoparticles were as follows: CS concentration of 2.0 mg/mL, STI concentration of 1.0 mg/mL, and pH 6.0. The INs-STI-CS nanoparticles prepared at this condition had a high insulin encapsulation efficiency of 85.07%, the particle diameter size was 350 ± 5 nm, and the PDI value was 0.13. The results of the in vitro evaluation of simulated gastrointestinal digestion showed that the prepared nanoparticles could improve the stability of insulin in the gastrointestinal tract. Compared with free insulin, the insulin loaded in INs-STI-CS nanoparticles was retained at 27.71% after 10 h of digestion in the intestinal tract, while free insulin was completely digested. These findings will provide a theoretical basis for improving the stability of oral insulin in the gastrointestinal tract.

RNAi-mediated mortality of Culex quinquefasciatus using two delivery methods of potential field application

With increasing reports of resistance to traditional insecticides, there is a need for innovative ways for mosquito control. RNAi is a sequence-specific molecular biology technique for gene silencing through degradation of mRNA and prevention of protein translation. Some genes are essential for insect life and their silencing can lead to insect morbidity and/or mortality. Searching for lethal genes in Culex quinquefasciatus, we found dynamin, ROP, HMGR and JHAMT to be lethal targets for RNAi in initial screening through larval soaking in dsRNA solution. Two delivery methods, chitosan nanoparticles and genetically modified yeast cells, were used in this study and proved effective in inducing high larval mortality and low adult emergence. Adult emergence after chitosan nanoparticles/dsRNA treatment was 12.67% ± 1.76 (HMGR), 17.33% ± 1.76 (dynamin), 18.67% ± 0.67 (ROP), and 35.33% ± 0.67 (JHAMT). Genetically modified yeast increased mortalities as adult emergence was 8.33% ± 1.67 (HMGR), 13.33% ± 3.33 (dynamin), and 10% ± 2.89 (JHAMT and ROP). Chitosan nanoparticles retained 75% of its biological activity whereas yeast cells retained >95% of their activities after 7 days of incubation in water. In conclusion, our results showed that these four genes are good targets for C. quinquefasciatus control using RNAi packaged in either chitosan nanoparticles or genetically modified yeast cells.

Dextran-Chitosan Composites: Antioxidant and Anti-Inflammatory Properties

This study presents the development of new formulations consisting of dextran (Dex) and chitosan (Ch) matrices, with fillings such as chitosan stearate (MCh), citric acid, salicylic acid, or ginger extract. These materials were characterized using Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and mechanical tests, and evaluated for antioxidant properties, including scavenging activities, metal chelation, and ferric ion reducing power, as well as anti-inflammatory properties, measuring the binding affinity between serum albumin and the bioactive substances, which can influence their bioavailability, transport, and overall anti-inflammatory effect. Compounds in ginger such as 6-gingerol reduce inflammation by inhibiting the production of inflammatory substances, such as prostaglandin, cytokines, interleukin-1β, and pro-inflammatory transcription factor (NF-κB) and, alongside citric and salicylic acids, combat oxidative stress, stabilizes cell membranes, and promote membrane fluidity, thereby preserving membrane integrity and function. Incorporating chitosan stearate in chitosan:dextran samples created a dense, stiff film with an elastic modulus approximately seventeen times higher than for the chitosan:dextran matrix. The Dex:Ch:MCh sample exhibited low compressibility at 48.74 ± 1.64 kPa, whereas the Dex:Ch:MCh:citric acid:salicylic acid composite had a compact network, allowing for 70.61 ± 3.9% compression at 109.30 kPa. The lipid peroxidation inhibitory assay revealed that Dex:Ch:MCh:citric acid had the highest inhibition value with 83 ± 0.577% at 24 h. The study highlights that adding active substances like ginger extract and citric acid to Dex:Ch composites enhances antioxidant properties, while modified chitosan improves mechanical properties. These composites may have potential medical applications in repairing cell membranes and regulating antioxidant enzyme activities.

Mechanism of Heterogeneous Alkaline Deacetylation of Chitin: A Review

This review provides an analysis of experimental results on the study of alkaline heterogeneous deacetylation of chitin obtained by the authors and also published in the literature. A detailed analysis of the reaction kinetics was carried out considering the influence of numerous factors: reaction reversibility, crystallinity and porosity of chitin, changes in chitin morphology during washing, alkali concentration, diffusion of hydroxide ions, and hydration of reacting particles. A mechanism for the chitin deacetylation reaction is proposed, taking into account its kinetic features in which the decisive role is assigned to the effects of hydration. It has been shown that the rate of chitin deacetylation increases with a decrease in the degree of hydration of hydroxide ions in a concentrated alkali solution. When the alkali concentration is less than the limit of complete hydration, the reaction practically does not occur. Hypotheses have been put forward to explain the decrease in the rate of the reaction in the second flat portion of the kinetic curve. The first hypothesis is the formation of “free” water, leading to the hydration of chitin molecules and a decrease in the reaction rate. The second hypothesis postulates the formation of a stable amide anion of chitosan, which prevents the nucleophilic attack of the chitin macromolecule by hydroxide ions.

Interactions between Soybean Trypsin Inhibitor and Chitosan in an Aqueous Solution

Supramolecular structures obtained from protein-polysaccharide association may be applied to encapsulate bioactive compounds or to improve the physical stability and texture properties of colloid-based products. In this study, the interaction of 0.1 wt% soybean trypsin inhibitor (STI) with different concentrations of chitosan (CS) in aqueous solutions was investigated under different pH by the analysis of state diagram, turbidity, zeta potential, spectroscopy, and microstructure; the protective effect of STI-CS complex coacervates on STI stability in simulated gastric juice was also discussed. The results suggested that interactions between STI and CS could form soluble/insoluble complexes mainly through hydrophobic interactions (pH 4.0) or electrostatic interactions (pH 6.0). The CD spectra showed that the secondary structure of STI did not change significantly when CS with the same charge was mixed with STI, and the secondary structure of STI was slightly changed when CS with the opposite charge was mixed with STI. Simulated gastric digestion experiments showed that the complex formed by non-covalent bonding had a protective effect on the active protein. This study provides information about the effect of different CS concentrations and pH values on the formation of complexes of CS and STI in an aqueous solution and provides theoretical references for the construction of supramolecular-structured carrier substances based on CS and STI.

Carbohydrate polymer-based nanocomposites for breast cancer treatment

Breast cancer is known as the most common invasive malignancy in women with the highest mortality rate worldwide. This concerning disease may be presented in situ (relatively easier treatment) or be invasive, especially invasive ductal carcinoma which is highly worrisome nowadays. Among several strategies used in breast cancer treatment, nanotechnology-based targeted therapy is currently being investigated, as it depicts advanced technological features able of preventing drugs' side effects on normal cells while effectively acting on tumor cells. In this context, carbohydrate polymer-based nanocomposites have gained particular interest among the biomedical community for breast cancer therapy applications due to their advantage features, including abundance in nature, biocompatibility, straightforward fabrication methods, and good physicochemical properties. In this review, the physicochemical properties and biological activities of carbohydrate polymers and their derivate nanocomposites were discussed. Then, various methods for the fabrication of carbohydrate polymer-based nanocomposites as well as their application in breast cancer therapy and future perspectives were discussed.

Chitosan-Based Nano-Smart Drug Delivery System in Breast Cancer Therapy

Despite recent advances, cancer remains the primary killer on a global scale. Numerous forms of research have been conducted to discover novel and efficient anticancer medications. The complexity of breast cancer is a major challenge which is coupled with patient-to-patient variations and heterogeneity between cells within the tumor. Revolutionary drug delivery is expected to provide a solution to that challenge. Chitosan nanoparticles (CSNPs) have prospects as a revolutionary delivery system capable of enhancing anticancer drug activity and reducing negative impacts on normal cells. The use of smart drug delivery systems (SDDs) as delivering materials to improve the bioactivity of NPs and to understand the intricacies of breast cancer has garnered significant interest. There are many reviews about CSNPs that present various points of view, but they have not yet described a series in cancer therapy from cell uptake to cell death. With this description, we will provide a more complete picture for designing preparations for SDDs. This review describes CSNPs as SDDSs, enhancing cancer therapy targeting and stimulus response using their anticancer mechanism. Multimodal chitosan SDDs as targeting and stimulus response medication delivery will improve therapeutic results.

Development of Hybrid Materials Based on Chitosan, Poly(Ethylene Glycol) and Laponite® RD: Effect of Clay Concentration

In the context of increasing interest in biomaterials with applicability in cosmetics and medicine, this research aims to obtain and characterize some hybrid materials based on chitosan (CS) (antibacterial, biocompatible, and biodegradable), poly(ethylene glycol) (PEG) (non-toxic and prevents the adsorption of protein and cell) and Laponite^® RD (Lap) (bioactive). The rheological properties of the starting dispersions were investigated and discussed related to the interactions developed between components. All samples exhibited gel-like properties, and the storage modulus of CS/PEG dispersion increased from 6.6 Pa to 657.7 Pa by adding 2.5% Lap. Structural and morphological characterization of the films, prepared by solution casting method, was performed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and polarized light microscopy (POM). These analyses proved the incorporation of Lap into CS/PEG films and revealed the morphological changes of the films by the addition of clay. Thereby, at the highest Lap concentration (43.8%), the "house of cards" structure formed by Lap platelets, which incorporate chitosan chains, as evidenced by SEM and POM. Two stages of degradation between 200 °C and 410 °C were evidenced for the films with Lap concentration higher than 38.5%, explained by the existence of a clay-rich phase (given by the clay network) and chitosan-rich one (due to the intercalation of chitosan in the clay network). CS/PEG film with 43.8% Lap showed the highest swelling degree of 240.7%. The analysis of the obtained results led to the conclusion that the addition of clay to the CS/PEG films increases their stability in water and gives them greater thermal stability.

Biocomposite Materials Based on Poly(3-hydroxybutyrate) and Chitosan: A Review

One of the important directions in the development of modern medical devices is the search and creation of new materials, both synthetic and natural, which can be more effective in their properties than previously used materials. Traditional materials such as metals, ceramics, and synthetic polymers used in medicine have certain drawbacks, such as insufficient biocompatibility and the emergence of an immune response from the body. Natural biopolymers have found applications in various fields of biology and medicine because they demonstrate a wide range of biological activity, biodegradability, and accessibility. This review first described the properties of the two most promising biopolymers belonging to the classes of polyhydroxyalkanoates and polysaccharides-polyhydroxybutyrate and chitosan. However, homopolymers also have some disadvantages, overcome which becomes possible by creating polymer composites. The article presents the existing methods of creating a composite of two polymers: copolymerization, electrospinning, and different ways of mixing, with a description of the properties of the resulting compositions. The development of polymer composites is a promising field of material sciences, which allows, based on the combination of existing substances, to develop of materials with significantly improved properties or to modify of the properties of each of their constituent components.