Zinc selective chemosensors based on the flexible dipicolylamine and quinoline

Selective synthesis of cyclic alcohols from cycloalkanes using nickel(ii) complexes of tetradentate amidate ligands

Selective functionalisation of hydrocarbons using transition metal complexes has evoked significant research interest in industrial chemistry. However, selective oxidation of unactivated aliphatic C-H bonds is challenging because of the high bond dissociation energies. Herein, we report the synthesis, characterisation and catalytic activity of nickel(ii) complexes ([Ni(L1-L3)(OH2)2](ClO4)2 (1-3)) of monoamidate tetradentate ligands [L1: 2-(bis(pyridin-2-ylmethyl)amino)-N-phenylacetamide, L2: 2-(bis(2-pyridin-2-ylmethyl)amino)-N-(naphthalen-1-yl)acetamide, L3: N-benzyl-2-(bis(pyridin-2-ylmethyl)amino)acetamide] in selective oxidation of cycloalkanes using m-CPBA as the oxidant. In cyclohexane oxidation, catalysts showed activity (TON) in the order 1 (654) > 2 (589) > 3 (359) with a high A/(K + L) ratio up to 23.6. Using catalyst 1, the substrate scope of the reaction was broadened by including other cycloalkanes such as cyclopentane, cycloheptane, cyclooctane, adamantane and methylcyclohexane. Further, the Fenton-type reaction in the catalytic cycle was discarded based on the relatively high 3°/2° ratio of 8.6 in adamantane oxidation. Although the formation of chlorinated products during the reactions confirmed the contribution of the 3-chlorobenzoyloxy radical mechanism, the high alcohol selectivity obtained for the reactions indicated the participation of nickel-based oxidants in the oxidation process.

Synthesis, DFT studies on a series of tunable quinoline derivatives

The synthesis, Density Functional Theory (DFT) calculations, and photo physical characteristics of a range of quinoline derivatives have been described in the present work. Initially, the innovative derivatives are synthesized through the cyclization of 2-amino-5-nitrobenzophenone with either acetyl acetone or ethyl acetoacetate, followed by reducing the nitro group to an amine. Subsequently, these compounds undergo an acid-amine cross-coupling reaction. The investigation shows the DFT and photo physical properties of these substances. It is noteworthy that compound 6z exhibits the most remarkable Stokes shift among the fluorophores investigated. Furthermore, the research also provides insights into the electrophilicity index, Electronegativity, chemical potential, chemical hardness and softness properties. These properties are determined by utilizing Density Functional Theory (DFT) calculations and evaluating electron potential efficiency and using computational methods Time-Dependent Density Functional Theory (TD-DFT) to predict absorption spectra in molecules at the B3LYP/6-31G'(d,p) level/basis.

A highly emissive Zn(II)-pyridyl-benzimidazolyl-phenolato-based chemosensor: detection of H2PO4-via "use" and "throw" device fabrication

2-Ethoxy-6-[1-(phenyl-pyridin-2-yl-methyl)-1H-benzoimidazol-2-yl]-phenol (HL) selectively serves as a sensitive 'turn on' Zn²⁺ sensor in 9 : 1 (v/v) DMSO/H₂O (HEPES buffer, pH = 7.4) medium in the presence of sixteen other cations at the limit of detection (LOD) of 3.2 nM. The strong blue emission of the complex, {[Zn(L¹)OAc]} (HL¹ = benzimidazolyl ring-opening structure of HL) (λ_em, 461 nm), is quenched by H₂PO₄^- in the presence of eighteen other anions and the LOD is 0.238 μM. The emission of the complex is due to restricted intramolecular rotation (RIR) followed by chelation-enhanced fluorescence (CHEF). The quenching of the emission of [Zn(L¹)OAc] by H₂PO₄^- (in the presence of other P^Vs (inorganic and biological) as well as additional anions) is due to the 'turn off' fluorescence via the demetallation and release of the nonfluorescent ligand, HL, and [Zn(H₂PO₄)]⁺. An INHIBIT logic gate memory circuit of the probe HL was devised with Zn²⁺ and H₂PO₄^- as two consecutive inputs. The percentage of H₂PO₄^- recovery was excellent and was obtained from distilled, tap, and drinking water sources. The bright blue emission of [Zn(L¹)OAc] further triggered the fabrication of ready-made portable thin films of the Zn-complex, which executed a cost-effective 'on-site' solid-state contact mode detection of H₂PO₄^- with selectivity at the picogram level (10.97 pg cm^-2) by monitoring the intensities of quenched spots under UV light upon varying the analyte concentration from 10^-8 to 10^-3 M. Finally, taking advantage of reversible fluorescence switching, a simple and definite ion-responsive security feature was successfully embedded into a "use" and "throw" solution-coated paper strip of the Zn(II)-pyridyl-benzimidazolyl-phenolato-based chemosensor, which efficiently detected H₂PO₄^- in water by a successive 'ON-OFF' fluorescence switching-driven security activity without any exhaustion of the emission phenomenon.

A Fluorescence Sensor Array Based on Zinc(II)-Carboxyamidoquinolines: Toward Quantitative Detection of ATP*

The newly prepared fluorescent carboxyamidoquinolines (1-3) and their Zn(II) complexes (Zn@1-Zn@3) were used to bind and sense various phosphate anions utilizing a relay mechanism, in which the Zn(II) ion migrates from the Zn@1-Zn@3 complexes to the phosphate, namely adenosine 5'-triphosphate (ATP) and pyrophosphate (PPi), a process accompanied by a dramatic change in fluorescence. Zn@1-Zn@3 assemblies interact with adenine nucleotide phosphates while displaying an analyte-specific response. This process was investigated using UV-vis, fluorescence, and NMR spectroscopy. It is shown that the different binding selectivity and the corresponding fluorescence response enable differentiation of adenosine 5'-triphosphate (ATP), adenosine 5'-diphosphate (ADP), pyrophosphate (PPi), and phosphate (Pi). The cross-reactive nature of the carboxyamidoquinolines-Zn(II) sensors in conjunction with linear discriminant analysis (LDA) was utilized in a simple fluorescence chemosensor array that allows for the identification of ATP, ADP, PPi, and Pi from 8 other anions including adenosine 5'-monophosphate (AMP) with 100 % correct classification. Furthermore, the support vector machine algorithm, a machine learning method, allowed for highly accurate quantitation of ATP in the range of 5-100 μM concentration in unknown samples with error <2.5 %.

The Role of 8-Amidoquinoline Derivatives as Fluorescent Probes for Zinc Ion Determination

Mass-spectrometry-based and X-ray fluorescence-based techniques have allowed the study of the distribution of Zn2+ ions at extracellular and intracellular levels over the past few years. However, there are some issues during purification steps, sample preparation, suitability for quantification, and the instruments' availability. Therefore, work on fluorescent sensors based on 8-aminoquinoline as tools to detect Zn2+ ions in environmental and biological applications has been popular. Introducing various carboxamide groups into an 8-aminoquinoline molecule to create 8-amidoquinoline derivatives to improve water solubility and cell membrane permeability is also a recent trend. This review aims to present a general overview of the fluorophore 8-aminoquinoline and its derivatives as Zn2+ receptors for zinc sensor probes. Various fluorescent chemosensor designs based on 8-amidoquinoline and their effectiveness and potential as a recognition probe for zinc analysis were discussed. Based on this review, it can be concluded that derivatives of 8-amidoquinoline have vast potential as functional receptors for zinc ions primarily because of their fast reactivity, good selectivity, and bio-compatibility, especially for biological applications. To better understand the Zn2+ ion fluorophores' function, diversity of the coordination complex and geometries need further studies. This review provides information in elucidating, designing, and exploring new 8-amidoquinoline derivatives for future studies for the improvement of chemosensors that are selective and sensitive to Zn2+.

C3-symmetric triaminoguanidine based colorimetric and fluorometric chemosensor: Sequential detection of Zn2+/PPi, its RGB performance for detection of Zn2+ ion and construction of IMPLICATION logic gate

In this work, new ethyl(E)-2-cyano-3-(1H-pyrrol-2-yl)acrylate appended C₃-symmetric star-shape triaminoguanidine based Schiff base (LH₃) was designed and synthesized from simple synthons. New probe, LH₃ was completely analyzed by ¹H NMR, ¹³C NMR and mass spectrum. In the present probe LH₃, effective π-conjugated ethyl(E)-2-cyano-acrylate unit was introduced on the periphery of the pyrrole-triaminoquanidine conjugates by using carefully chosen building units. The probe LH₃ shows high selectivity and sensitivity towards Zn²⁺ ion via colorimetric and fluorometric changes. The yellowish orange color of LH₃ solution turned to wine red color upon addition of Zn²⁺ solution, along with red shifted absorption maxima from 450 nm to 550 nm, this indicates the formation of LH₃-Zn²⁺ species. Job's plot and mass spectrum analysis confirms the formation of 1:3 stoichiometric complex between the LH₃ and Zn²⁺ ions. Further this ensemble shows selective detection towards PPi anion over the other anions based on displacement metal ion approach. Hence, reversible colorimetric/emission response of LH₃ towards Zn²⁺ and PPi ions via "on-off-on" manner could allow the construction of IMPLICATION logic gate functions. The practical efficacy of the probe LH₃ was established by utilization of the probe for the detection of Zn²⁺ ions in real water sample analysis. Further, the significant noticeable colorimetric changes of the probe LH₃ upon addition of Zn²⁺ ion have been successfully integrated with a smartphone app RGB color value to construct a real-time analysis of Zn²⁺ ions.

Theoretical and Experimental Investigations of Large Stokes Shift Fluorophores Based on a Quinoline Scaffold

A series of novel styrylquinolines with the benzylidene imine moiety were synthesized and spectroscopically characterized for their applicability in cellular staining. The spectroscopic study revealed absorption in the ultraviolet-visible region (360-380 nm) and emission that covered the blue-green range of the light (above 500 nm). The fluorescence quantum yields were also determined, which amounted to 0.079 in the best-case scenario. The structural features that are behind these values are also discussed. An analysis of the spectroscopic properties and the theoretical calculations indicated the charge-transfer character of an emission, which was additionally evaluated using the Lippert-Mataga equation. Changes in geometry in the ground and excited states, which had a significant influence on the emission process, are also discussed. Additionally, the capability of the newly synthesized compounds for cellular staining was also investigated. These small molecules could effectively penetrate through the cellular membrane. Analyses of the images that were obtained with several of the tested styrylquinolines indicated their accumulation in organelles such as the mitochondria and the endoplasmic reticulum.

Rapid Discovery and Structure-Property Relationships of Metal-Ion Fluorescent Sensors via Macroarray Synthesis

A macroarray immobilisation of fluorophores on filter papers for sensing metal ions by in-situ reductive amination and carbodiimide coupling is reported herein. Chemometric approaches resulted in a rapid discovery of sensors that can synergistically discriminate up to 12 metal ions with great prediction accuracies. Covalently bound on paper, sensoring scaffolds that were synthesised from the macroarray format can readily be adopted as practical paper-based sensors with great reusability and sensitivity, achieving the limit of detection at low nanomolar level with some repeating spotting. Lastly, the discovered scaffolds were also confirmed to be functional as unbound molecules, thus paving the way for more diverse applications.

A hexa-quinoline basedC3-symmetric chemosensor for dual sensing of zinc(ii) and PPi in an aqueous mediumviachelation induced “OFF–ON–OFF” emission

“OFF–ON–OFF” luminescence switching behavior of a hexa-quinoline based sensor towards Zn²⁺and PPi in an aqueous buffer medium is demonstrated.

A Colorimetric and Fluorescent Chemosensor for the Selective Detection of Cu2+ and Zn2+ Ions

A new bi-functional chemosensor 1 based on 3,5-dichlorosalicylaldehyde and 2-(methylthio)aniline has been synthesized. It can detect Cu²⁺ with a color change from pale yellow to dark yellow in aqueous solution. The selective mechanism of 1 for Cu²⁺ was proposed to be the enhancement of the intramolecular charge transfer (ICT) band, which was explained by theoretical calculations. The sensor 1 could be used to detect and quantify Cu²⁺ in water samples. In addition, the sensor 1 displayed "turn-on" fluorescence response only to Zn²⁺, based on an effect of chelation-enhanced fluorescence (CHEF). Therefore, 1 can serve as a 'single sensor for two different targets' with dual modes.

Multiple target chemosensor: a fluorescent sensor for Zn(ii) and Al(iii) and a chromogenic sensor for Fe(ii) and Fe(iii)

A multifunctional fluorescent and colorimetric chemosensor for Zn²⁺, Al³⁺, Fe²⁺ and Fe³⁺ was designed and synthesized.

Aminomethylpyrene-based imino-phenols as primary fluorescence switch-on sensors for Al3+ in solution and in Vero cells and their complexes as secondary recognition ensembles toward pyrophosphate

Three aminomethylpyrene-based salicyl-imines, viz.L1, L2 and L3 were designed and synthesized for Al³⁺ ion sensing.

A highly selective fluorescent chemosensor based on a quinoline derivative for zinc ions in pure water

A water-soluble fluorescent sensor with a low detection limit could be used to detect and quantify Zn²⁺in water samples.

A simple pincer-type chemosensor for reversible fluorescence turn-on detection of zinc ion at physiological pH range

A dihydrazone based pincer-type chemosensor (Y) which could detect zinc at physiological pH range with reversible fluorescence “Off–On–Off”.

A highly selective CHEF-type chemosensor for monitoring Zn2+ in aqueous solution and living cells

A new quinolone-based chemosensor was synthesized and successfully applied to quantify and image Zn²⁺ in water samples and living cells.

Quinoline-attached triazacyclononane (TACN) derivatives as fluorescent zinc sensors

TACN (1,4,7-triazacyclononane) derivatives with three 6-methoxy-2-quinolylmethyl or 1-isoquinolylmethyl moieties were examined as fluorescent zinc sensors. Upon the addition of zinc, 6-MeOTQTACN (5) exhibited a 9-fold fluorescence increase at 420 nm (λex = 341 nm, ϕZn = 0.070). Fluorescence enhancement is specific for zinc and cadmium, although cadmium induces smaller increases (ICd/I0 = 3.6 and ICd/IZn = 40%). The isoquinoline analog 1-isoTQTACN (6) exhibits minimal fluorescence enhancement upon zinc binding. TPEN (N,N,N',N'-tetrakis(2-pyridylmethyl)ethylene-diamine) does not extract zinc from the 6-MeOTQTACN-Zn complex (5-Zn). The quantum yield, metal ion selectivity and metal binding affinity differences between TACN and ethylenediamine (EN) skeletons in quinoline-based ligands are discussed based on the X-ray crystallographic analysis of zinc and cadmium complexes, demonstrating the superiority of quinoline-TACN conjugates.

A cap-type Schiff base acting as a fluorescence sensor for zinc(II) and a colorimetric sensor for iron(II), copper(II), and zinc(II) in aqueous media

A simple and low cost chemosensor is described. This sensor could simultaneously detect three biologically important metal ions through fluorogenic (Zn(2+)) and chromogenic (Fe(2+), Cu(2+), and Zn(2+)) methods in aqueous solution. The sensor could function as a "turn-on" fluorescence receptor only to Zn(2+) ions. In addition, the sensor could be successfully applied to the detection of intracellular Zn(2+). Meanwhile, the sensor displayed an obvious red color upon selective binding with Fe(2+). Therefore, the sensor could serve as a useful tool for the discrimination of Fe(2+) from Fe(3+) in aqueous media. Moreover, the sensor also showed color changes from yellow to colorless upon selective binding with Zn(2+) and Cu(2+), respectively. The detection limit of the sensor for Cu(2+) (1.5 μM) is far below the guidelines of the World Health Organization (30 μM) as the maximum allowable copper concentration in drinking water, and therefore it is capable of being a practical system for the monitoring of Cu(2+) concentrations in aqueous samples. These results provide a new approach for selectively recognizing the most important three trace elements in the human body simultaneously, for Zn(2+) by emission spectra and Fe(2+), Cu(2+), and Zn(2+) by the naked eye.

A highly selective quinoline-based fluorescent sensor for Zn(II)

A quinoline-based simple receptor (bis(2-quinolinylmethyl)benzylamine = 1) as a Zn(2+) selective fluorescent chemosensor showed a large fluorescent enhancement with a blue shift in the presence of Zn(2+) which is attributed to a chelation enhanced fluorescence (CHEF) effect with inhibition of a photoinduced electron transfer (PET) process of 1. In particular, this receptor could clearly distinguish Zn(2+) from Cd(2+). The binding mode of 1 and Zn(2+) was found to be a 1:1 and confirmed by Job plot, (1)H NMR titration and ESI-mass spectrometry analysis.

A single chemosensor for multiple analytes: fluorogenic detection of Zn2+ and OAc− ions in aqueous solution, and an application to bioimaging

A single fluorescent chemosensor 1 for multiple analytes (Zn²⁺ and OAc⁻) has been developed and it can monitor Zn²⁺ ions in living cells.