Syntheses, luminescences and Hirshfeld surfaces analyses of structurally characterized homo-trinuclear ZnII and hetero-pentanuclear ZnII-LnIII (Ln = Eu, Nd) bis(salamo)-like complexes

A novel bifunctional-group salamo-like multi-purpose dye probe based on ESIPT and RAHB effect: Distinction of cyanide and hydrazine through optical signal differential protocol

A novel bifunctional-group multi-purpose dye probe p-TNS has been designed and synthesized. The probe p-TNS has unique excited-state intramolecular proton transfer (ESIPT) and resonance-assisted hydrogen bonding (RAHB) coupled system, was confirmed to detect cyanide and hydrazine by blocking the ESIPT effect. Cyanide can change the fluorescence of the solution from bright green to orange-red (116 nm Stokes shift), while hydrazine causes the bright green fluorescence to be quenched. The recognition mechanism of the probe p-TNS to CN^- and N₂H₄ was proposed reasonably through spectral characterizations and theoretical calculations. Combined with theoretical calculations, it was speculated that the solvent dependence may be caused by the ICT effect in the molecule. The probe p-TNS could be prepared into test strips for the detection of cyanide and hydrazine. In addition, the probe molecule can also be used to detect trace amounts of cyanide in agricultural products, and respond to gaseous hydrazine by direct contact, indicating that the probe p-TNS has good practical application prospects. Therefore, this molecular framework provides a new way of thinking about detecting multiple target substances.

Novel single-armed nitrogen-heterocyclic salamo-based fluorescent sensors for the detection of Al3+ and CN. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2021;258:119815. [PMID: 33930852 DOI: 10.1016/j.saa.2021.119815]

Two novel single-armed nitrogen-heterocyclic chemosensors with basically similar structures, PDNS and PZNS, were synthesized to specifically identify Al³⁺ in DMS:H₂O (1:1 v/v) solution by fluorescence emission spectroscopy, and the colour of PDNS and PZNS changed from yellow to colorless when Al³⁺ was added under daylight. This is the first time that nitrogen-heterocyclic is introduced into salamo-based chemical sensor. At excitation wavelengths of 361 and 365 nm, solutions of PDNS and PZNS changed to intense green-blue fluorescence. Furthermore, it was found that PDNS/PZNS and Al³⁺ have excellent binding capacity, the lower limit of detection (LOD = 6.25 × 10^-9/1.26 × 10^-9 mol·dm^-3) is also calculated. In addition, sensor PZNS can detect Al³⁺ in a solution system with up to 95% water content and applicable pH range is 3-12. Compared to other salamo-based sensors, PZNS and PDNS have broader detection conditions and wider utilities. PZNS can also identify CN^- in fluorescence spectrum. PZNS can be used for detection of Al³⁺ in aqueous systems in daily production and life.

A Bis(Salamo)-Based Fluorogenic Sensor for Highly Selective and Sequential Recognition of Cu2+ and B4O72- Ions in Semi-Aqueous Medium

A new type of multifunctional bis(salamo)-based fluorogenic sensor H₂BS was designed and synthesized. Under the action of V_DMF: V_H2O = 9: 1, the fluorogenic sensor can identify Cu²⁺ and B₄O₇^2-, in which N and O atoms can serve as binding sites for Cu²⁺ and B₄O₇^2-, the stoichiometry of the binding of the fluorogenic sensor H₂BS and Cu²⁺ has been confirmed by titration experiment, working curve, ESI-MS analysis and DFT calculation. The pH response experiment also confirmed that the fluorogenic sensor can recognize Cu²⁺ and B₄O₇^2- in the pH range applicable to the physiological environment. The minimum detection limit of H₂BS for Cu²⁺ and B₄O₇^2- recognition reaches 1.12 × 10^-7 and 5.56 × 10^-8 M, and the fluorogenic sensor H₂BS has been successfully applied to Cu²⁺ detection in actual water samples, and the test strip for detecting Cu²⁺ and B₄O₇^2- was obtained. Meanwhile, the success of the test strip experiment made the fluorogenic sensor H₂BS to recognize Cu²⁺ and B₄O₇^2- widely used in daily life. A new type of salamo-based multifunctional fluorogenic sensor H₂BS was designed and synthesized to identify Cu²⁺ and B₄O₇^2- in aqueous solvent systems. Added Cu²⁺ to H₂BS can cause fluorescence quenching. Further experiments showed that H₂BS and Cu²⁺ form a stable 1:2 complex, while B₄O₇^2- can also cause fluorescence quenching of H₂BS, which is the occurrence of the PET effect. Meanwhile, H₂BS can be used for quantitative detection in the environment and rapid identification in life.

A newly synthesized visual bis(salamo)-based fluorescent chemosensor for exogenous detection of B4O72- in living cells and zebrafish

A newly synthesized fluorescent chemosensor H₆L was explored for detecting B₄O₇^2-, characterized by ¹H NMR spectrum, mass spectrum and fluorescence spectra. During the detection process of B₄O₇^2-, the fluorescence is significantly enhanced and naked eye recognition can be performed under 365 nm UV light without any interference by other typical anions. The limit of detection is as low as 6.97 × 10^-10 M. In addition, in order to broaden the application of salamo-based fluorescence sensors in the field of biology, except for the fluorescence imaging of HeLa cells, the first attempt of exogenous detection in zebrafish was conducted successfully.

Insight into Rare Structurally Characterized Homotrinuclear CuII Non-Symmetric Salamo-Based Complex

A rare homotrinuclear CuII salamo-based complex [Cu3(L)2(μ-OAc)2(H2O)2]·2CHCl3·5H2O was prepared through the reaction of a non-symmetric salamo-based ligand H2L and Cu(OAc)2·H2O, and validated by elemental analyses, UV-Visible absorption, fluorescence and infrared spectra, molecular simulation and single-crystal X-ray analysis techniques. It is shown that three CuII atoms and two wholly deprotonated ligand (L)2− moieties form together a trinuclear 3:2 (M:L) complex with two coordination water molecules and two bi-dentate briging μ-acetate groups (μ-OAc−). Besides, the Hirshfeld surface analysis of the CuII complex was investigated. Compared with other ligands, the fluorescent strength of the CuII complex was evidently lowered, showing that the CuII ions possess fluorescent quenching effect.

A Highly Selective Turn-on Fluorescent and Naked-eye Colourimetric Dual-channel Probe for Cyanide Anions Detection in Water Samples

A highly selective turn-on fluorescent and naked-eye colourimetric dual-channel probe for cyanide anions (CN-) has been designed and characterized. In the mixed solution (DMSO / H₂O, 9:1, v / v), only CN- could cause an increase in the UV absorption intensity and the corresponding fluorescence intensity increased, and other anions had no significant effect on the probe. After treatment with cyanide in the probe solution, the solution showed a noticeable colour change, from light yellow to purple. Moreover, a fluorescence spectrophotometer can be used to observe that the fluorescence intensity of the solution is significantly enhanced. The response of the colourimetric and fluorescent dual-channel probe to CN- was attributed to nucleophilic addition, and the mechanism was determined by ¹H NMR spectroscopy. In addition, this probe was used to detect CN- in actual water samples, including river water, drinking water, and tap water. The spiked CN- recovery rate is very high (97.2%-100.06%), and analytical precision is also very high (RSD < 2%), which shows its feasibility and reliability for detecting cyanide ions in actual water samples.

Two novel tetraphenylethylene-skeleton salamo-type fluorescent probes: specific recognition of cyanide through different response patterns

The possible sensing mechanism of probes TPES1 and TPES2 towards CN− ions.

A novel turn-on fluorogenic aldehyde-appended salamo-like copper(ii) complex probe for the simultaneous detection of S2O32− and GSH

A novel salamo-like copper(ii) complex probe (ASC) behaves as a two-pronged sensor of S₂O₃²⁻ ions and GSH by a ‘turn-on’ fluorescence mechanism.

Seven new metal-organic frameworks assembled from semi-rigid polycarboxylate and auxiliary N-donor ligands: syntheses, structures and properties

Seven new metal-organic frameworks (MOFs), namely, [Zn₂(L¹)(H₂O)₃]_n (1), [Zn₂(L¹)(dib)(H₂O)₂]_n (2), {[Zn₂(L¹)(4,4'-bipy)(H₂O)₂]·H₂O}_n (3), [Cd₂(L¹)(1,10-phen)]_n (4), [Ni₂(HL¹)(4,4'-bipy)(μ₃-OH)(μ₂-H₂O)]_n (5), {[Co₄(L¹)(4,4'-bibp)₃]·(4,4'-bibp)₃}_n (6), and [Co₂(L²)(4,4'-bibp)₂(H₂O)]_n (7), where H₄L¹ and H₄L² are semi-rigid 3-(3,5-dicarboxylphenoxy)phthalic acid and 4-(3,5-dicarboxylphenoxy)phthalic acid, respectively, and 4,4'-bipy is 4,4'-bipyridine, dib is 1,4-bis(1H-imidazol-1-yl)benzene, 1,10-phen is 1,10-phenanthroline and 4,4'-bipb is 1,4-bis(pyridin-4-yl)benzene, have been prepared under solvothermal conditions with Zn^II, Cd^II, Co^II and Ni^II ions in the presence of auxiliary N-donor ligands. The crystal structures and photoluminescence and magnetic properties of these compounds have been investigated. Compound 1 displays a 3,4,6-connected two-dimensional (2D) topology with a Schläfli symbol of (4².5)₂(4³.5².7)(4⁵.5⁶.6³)₂, and the 2D structure was further assembled to form a three-dimensional (3D) framework by intermolecular O-H...O hydrogen bonds. Compound 2 features a novel 3,3,4-connected structure and the point symbol is (4.10²)(4.6.8⁴)(6².8). Compound 3 exhibits a 3,4,6-connected 3-nodal net having a 3,4,6 T53 type topology, with the point symbol (4.6²)₂(4².6⁴)₂(4².6⁸.8².10³). Compound 4 shows a 2D→3D supramolecular structure formed by π-π stacking interactions. Compound 5 possesses a 3D framework with a tfz-d net topology. Compounds 6 and 7 are constructed from the same auxiliary ligand and metal salt at the same temperature, but with different main ligands and exhibiting different topologies. Compound 6 presents a 3D 4,6-connected topological network with a Schläfli symbol of (3.4⁴.6)(3².4⁴.5⁶.6³), while compound 7 has a 3D topological network with a Schläfli symbol of (4¹².6¹⁶). Magnetic analyses indicate that compounds 5 and 7 show weak antiferromagnetic interactions.