Photophysical and photocatalytic properties of structurally modified UiO-66

Defective UiO-66-NH2 (Zr) for Simultaneous Adsorption of Phosphate and Pb2+ for Hydrogen Peroxide Purification

Removal of hetero ions from the hydrogen peroxide solution is a crucial step in purifying electronic-grade H2O2. Conventional adsorption materials are challenged to meet the need for the simultaneous adsorption of both anions and cations in solvents. UiO-66 (Zr) modified by acetic acid and amino group for simultaneous adsorption of phosphate and Pb2+ in H2O2 purification was fabricated in this work. The as-prepared defective UiO-66-NH2 (Zr) demonstrated a significant increase in specific surface area and porosity, along with more exposed sites for phosphate and Pb2+ adsorption. The adsorption capacity of De-UiO-66-NH2 for phosphate and Pb2+ in H2O2 solution was 52.28 mg g-1 and 35.4 mg g-1, which is 1.19 times and 1.88 times that of unmodified UiO-66 (Zr), respectively. The trace simultaneous adsorption with both 100 ppb phosphate and Pb2+ showed removal rates of 94.0% and 88.7%, respectively, confirming the practicality of MOF materials in the purification of electronic chemicals. This work highlights the potential of Zr-based MOFs as anionic and cationic simultaneous adsorbents for highly efficient purification of electronic-grade solvents.

Boosting the Electrocatalytic Water Splitting Performance Using Hydrophilic Metal-Organic Framework

In this study, we employed a rapid and efficient microwave method to synthesize Metal-Organic Framework (MOF-303), which was subsequently embedded onto Palladium/Carbon (Pd/C) electrodes. The resulting hybrid material, Pd/C@MOF-303, was thoroughly characterized, and its performance in the Hydrogen Evolution Reaction (HER) was systematically investigated. The Pd/C@MOF-303 composite exhibited remarkable improvements in HER performance compared to the unmodified Pd/C electrode. At a benchmark current density of 10 mA cm-2 , the overpotentials for Pd/C and Pd/C@MOF-303 were measured at 185 mV and 175 mV, respectively. This reduction in overpotential highlights the superior catalytic activity of the Pd/C@MOF-303 hybrid material in facilitating the HER. Furthermore, the Pd/C@MOF-303 electrode demonstrated enhanced HER activity, increased mass activity, and excellent charge transfer rates compared to its unmodified counterpart, Pd/C. The findings underscore the significance of the hydrophilic MOF-303 in tailoring the surface characteristics of electrocatalysts, thereby offering insights into the design principles for advanced materials with superior performance in electrochemical applications.

Construction of UiO-66/Bi4O5Br2 Type-II Heterojunction to Boost Charge Transfer for Promoting Photocatalytic CO2 Reduction Performance

One of the basic challenges of CO₂ photoreduction is to develop efficient photocatalysts, and the construction of heterostructure photocatalysts with intimate interfaces is an effective strategy to enhance interfacial charge transfer for realizing high photocatalytic activity. Herein, a novel UiO-66/Bi₄O₅Br₂ heterostructure photocatalyst was constructed by depositing UiO-66 nanoparticles with octahedral morphology over the Bi₄O₅Br₂ nanoflowers assembled from the Bi₄O₅Br₂ nanosheets via an electrostatic self-assembly method. A tight contact interface and a built-in electric field were formed between the UiO-66 and the Bi₄O₅Br₂, which was conducive to the photo-electrons transfer from the Bi₄O₅Br₂ to the UiO-66 and the formation of a type-II heterojunction with highly efficient charge separation. As a result, the UiO-66/Bi₄O₅Br₂ exhibited improved photocatalytic CO₂ reduction performance with a CO generation rate of 8.35 μmol h⁻¹ g⁻¹ without using any sacrificial agents or noble co-catalysts. This work illustrates an applicable tactic to develop potent photocatalysts for clean energy conversion.

Experimental and Theoretical Study on the Interchange between Zr and Ti within the MIL-125-NH2 Metal Cluster

This study aims to investigate the effect of replacing Ti with Zr in the SBU of MIL-125-NH₂ . We were able to replace Ti with Zr in the mixed metal synthesis of MIL-125-NH₂ , for the first time. After experimentally confirming the consistency in their framework structure and comparing their morphology, we related the femtosecond light dynamics with photocatalytic CO₂ visible light conversion yield of the different variants in order to establish the composition-function relation in MIL-125 vis a vis CO₂ reduction. Introducing Zr to the system was found to cause structure defects due to missing linkers. The lifetime of the charge carriers for the mixed metal samples were shorter than that of the MIL-125-NH₂ . The study of CO₂ photocatalytic reduction under visible light indicated that the NH₂ group enhances the photocatalytic activity while the Zr incorporation inside the MIL framework introduces no significant improvements. In addition, the material systems were modelled and simulated through DFT calculations which concluded that the decrease of the photocatalytic activity is not related to the system electronic structure, insinuating that defects are the culprit.

Trends and Prospects in UiO-66 Metal-Organic Framework for CO2 Capture, Separation, and Conversion

Among thousands of known metal-organic frameworks (MOFs), the University of Oslo's MOF (UiO-66) exhibits unique structure topology, chemical and thermal stability, and intriguing tunable properties, that have gained incredible research interest. This paper summarizes the structural advancement of UiO-66 and its role in CO₂ capture, separation, and transformation into chemicals. The first part of the review summarizes the fast-growing literature related to the CO₂ capture reported by UiO-66 during the past ten years. The second part provides an overview of various advancements in UiO-66 membranes in CO₂ purification. The third part describes the role of UiO-66 and its composites as catalysts for CO₂ conversion into useful products. Despite many achievements, significant challenges associated with UiO-66 are addressed, and future perspectives are comprehensively presented to forecast how UiO-66 might be used further for CO₂ management.