Surface acid-base properties of Cu-BTC and Fe-BTC MOFs. An inverse gas chromatography and n-butylamine thermo desorption study

Bimetallic Copper-Cerium-Based Metal-Organic Frameworks for Selective Carbon Dioxide Capture

Metal-organic frameworks (MOFs) are highly regarded as valuable adsorbent materials in materials science, particularly in the field of CO2 capture. While numerous single-metal-based MOFs have demonstrated exceptional CO2 adsorption capabilities, recent advancements have explored the potential of bimetallic MOFs for enhanced performance. In this study, a CuCe-BTC MOF was synthesized through a straightforward hydrothermal method, and its improved properties, such as high surface area, smaller pore size, and larger pore volume, were compared with those of the bare Ce-BTC. The impact of the Cu/Ce ratio (1:4, 1:2, 1:1, and 3:2) was systematically investigated to understand how adding a second metal influences the CO2 adsorption performance of the Ce-BTC MOF. Various characterization techniques, including scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, thermogravimetric analysis, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and N2 BET surface area analysis, were employed to assess the physical and chemical properties of the bare Ce-BTC and CuCe-BTC samples. Notably, CuCe-BTC-1:2 exhibited superior surface area (133 m2 g-1), small pore size (3.3 nm), and large pore volume (0.14 cm3 g-1) compared to the monometallic Ce-BTC. Furthermore, CuCe-BTC-1:2 demonstrated a superior CO2 adsorption capacity (0.74 mmol g-1), long-term stability, and good CO2/N2 selectivity. This research provides valuable insights into the design of metal-BTC frameworks and elucidates how introducing a second metal enhances the properties of the monometallic Ce-BTC-MOF, leading to improved CO2 capture performance.

Enhanced selective copper precipitation by mechanochemically activated benzene tricarboxylic acid

Toward the treatment of waste solution containing heavy metals, direct precipitation of the metal ions from an acidic solution without alkaline neutralisation is still the greatest challenge. Based on the ligand properties of benzene tricarboxylic acid (BTC) to copper ions, a simple ball milling with 90 min at 400 rpm was used to activate BTC to enhance its capacity for copper removal from the pH of the original solution around 3-4. A set of analytical methods were used to characterise the activated BTC sample and BTC-Cu precipitate before and after copper precipitation. Compared with the raw BTC, the activated BTC could efficiently remove copper ions over 90% from an initial copper concentration of 100 mg/L in a shorter time from an acidic media with lower pH of around 2.60 and the maximum adsorption capacity can be stable at about 111.70 mg/g, resulting from probably the enhanced deprotonation effect for copper incorporation. Furthermore, at controlled dosage, the activated BTC demonstrated much high selectivity on precipitating copper ions from other heavy metals of Ni, Mn, Zn and Cd and provided a new approach for easy copper recycling from waste solution as secondary sources. This process may serve the purpose of recycling both metal and acidic solutions after the purification.