The first 3, 5, 6-trichloropyridine-2-oxyacetate bridged manganese coordination polymer with features of π⋯π stacking and halogen⋯halogen interactions: Synthesis, crystal analysis and magnetic properties

High-Efficiency Adsorption of Cr(VI) and Mn(VII) from Wastewater by a Two-Dimensional Copper-Based Metal-Organic Framework

Cr(VI) and Mn(VII) in industrial wastewater have certain toxicity, and they pose a threat to the environment and human health and safety. Metal-organic frameworks (MOFs) usually have rich adsorption sites and a large specific surface area. They can effectively adsorb Cr(VI) and Mn(VII) from wastewater. In this paper, a two-dimensional copper-based metal-organic framework, {[Cu·(4,4'-bpy)2·(H2O)]·2(NO3)·6(H2O)·(CH3OH)}n (1), is synthesized by hydrothermal synthesis. The structure of 1 is characterized by Fourier transform infrared (IR) spectroscopy, single-crystal X-ray diffraction, element analysis, and X-ray photoelectron spectroscopy (XPS). The results showed that 1 had a two-dimensional network structure, and the specific surface area of the nanostructure was 67.63 m2/g. The nanostructure of 1 could efficiently adsorb Cr(VI) and Mn(VII) from wastewater. The adsorption properties of Cr(VI) and Mn (VII) of 1 showed that the optimal concentration of both adsorbents was 0.2 g/L. It has good adsorption performance in the pH range 4-8. The adsorption performance is the best when pH is 7, which can reach 145 and 83 mg/g, respectively.

l-Isoleucine-Schiff Base Copper(II) Coordination Polymers: Crystal Structure, Spectroscopic, Hirshfeld Surface, and DFT Analyses

A new copper(II) coordination polymer was synthesized from the l-isoleucine-Schiff base and characterized by elemental analysis, Fourier transform infrared (FT-IR) spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, single-crystal X-ray diffraction (XRD) analysis, electronic paramagnetic resonance, and thermogravimetric analysis. XRD analysis confirmed the square planar coordination geometry of metallic centers and a zipper-like polymer structure. Vibrational, electronic, and paramagnetic spectroscopies and thermal analysis were consistent with the crystal structure. A Hirshfeld surface (HS) and density functional theory (DFT) analyses were employed to gain additional insight into interactions responsible for complex packing. The quantitative examination of two-dimensional (2D) fingerprint plots revealed, among other van der Waals forces, the dominating participation of H···H and H···Cl interactions in the molecular packing. The use of computational methods provided great help in detailing the supramolecular interactions occurring in the crystal, which were mainly van der Waals attractions. The electronic transition analysis helped corroborate the electronic transitions observed experimentally in the absorption spectrum. The frequency and vibrational mode analysis gave a deeper insight into the characterization of the CuL_CL complex.

An asymmetric mononuclear cobalt(II) compound derived from 3-bromo-pyridine-2,6-dicarboxylic acid involving in-situ hydrothermal decarboxylation: structure, magnetic property and Hirshfeld surface analysis

A new cobalt(II) compound with the formula [Co(5-Br-pyc)(2,2′-bipy)(H2O)(Cl)]·2H2O (1·H2O) (5-Br-Hpyc = 5-bromo-pyridine-2-carboxylic acid, 2,2′-bipy = 2,2′-bipyridine) has been hydrothermally synthesized and well characterized. The X-ray single-crystal diffraction analysis showed that 1⋅2H2O has crystallizes in the monoclinic system, space group P21/c (no. 14). The Co(II) center was octahedrally bonded by one bidentate chelate 5-Br-pyc anion and one 2,2′-bipy, one water molecule as well as one chloride anion to form the mononuclear structure of 1⋅2H2O. Complex 1⋅2H2O forms a 3D network through abundant O–H⋅⋅⋅O hydrogen bonds and π⋅⋅⋅π stacking interactions. Notably, the 5-Br-Hpyc ligand was in situ generated by decarboxylation of the 3-bromo-pyridine-2,6-dicarboxylic acid (3-Br-H2pydc) precursor selectively on 2-position under hydrothermal conditions. The magnetic properties, the Hirshfeld surface structure and the synthetic process for 1⋅2H2O have been carefully described and discussed.

A new copper(II) complex containing triclopyr: one-pot crystallization, structure, conformation and Hirshfeld surface analyses

A new copper(II) complex [Cu(3,5,6-tcpa)(2,2′-bipy)Cl] (1) has been obtained through the one-pot hydrothermal reaction of copper chloride dihydrate with triclopyr (systematic name 2-((3,5,6-trichloropyridin-2-yl)oxy)acetic acid, abbreviation 3,5,6-Htcpa) and 2,2′-bipyridine (2,2′-bipy) coligands. 1 has crystallized in triclinic crystal system, P 1 ‾ $\overline{1}$ space group. The central copper(II) ion displayed a distorted square–pyramidal geometry and was connected by one chlorido co-ligand (Clˉ), one 3,5,6-tcpa anionic chelator and one chelating 2,2’-bipy ligand to afford a mononuclear structure. 1 is further extended into a 3D network by the non-covalent interactions of H⋯Cl, H⋯O hydrogen bonds, aromatic π⋯π stacking together with Cl⋯Cl halogen bond interactions. The co-crystallization process, the crystal structure of 1 as well as the Hirshfeld surface analysis for 1 have been analyzed and described. In addition, the flexible conformation of phenoxy methylene group among 1, triclopyr acid and its previously reported co-crystallized compound also have been carefully compared and discussed.

The synthesis, crystal structure and conformation analysis of triclopyr ethyl ester

Triclopyr ethyl ester (1) has been co-synthesized through one-pot solvothermal reaction and the crystal structure has been determined by single crystal X-ray structure analysis. The compound C18H16Cl6N2O6 crystallizes in the monoclinic crystal system, P21/c space group with unit-cell parameters: a = 4.9615(2) Å, b = 30.9297(14) Å, c = 15.9155(10) Å, β = 91.466(4)° and Z = 4. Each unit cell is composed of two discrete, similar but reversely arranged triclopyr ethyl ester organic molecules. In the 3D packing plot, 1 is further assembled into a network structure via rich Cl⋯Cl halogen bond interactions. In addition, the crystal structure, the flexible conformation of phenoxy methylene group of 1 has been carefully compared and discussed with those of triclopyr acid.

THE SYNTHESIS AND PROPERTIES OF A SODIUM SUPRAMOLECULAR CRYSTAL NETWORK CONSTRUCTED WITH FUNCTIONAL PYRAZINE SULFONIC ACID

Sulfonic acid groups with C_3ν symmetry can coordinate with metal ions to produce multidimensional structures due to their flexible coordination modes. They can also penetrate into supramolecular structures through an intriguing bridging pattern and weak interactions. Herein, a novel heterocyclic sodium sulfonate supramolecular structure, namely [Na(Pyr-SO₃)(H₂O)]_n where Pyr-SO₃H is pyrazine sulfonic acid, is synthesized by utilizing NaBF₄ to coordinate with the P–SO₃H ligand through the solvent evaporation method. The single crystal X-ray diffraction (XRD) data indicate that the as-formed structure belongs to the Pbca space group. Additional properties are characterized by powder XRD, thermal analysis, and solid-state fluorescence. In particular, the introduction of a soft alkali metal ion can coordinate with the oxygen atom of the sulfonate ligand and form a Na–O bridging configuration that can not only significantly improve the pyrazine sulfonic acid ligand coordination ability, but also provide a reference for the extended study of functional sulfonate polymers in the future.

Two chemically robust Cd(II)-frameworks for efficient sensing of levofloxacin, benzaldehyde, and Fe3+ ions

Two luminescent Cd(II)-organic frameworks [Cd2(L1)(tdc)2(H2O)]n (1) and [Cd(L2)0.5(tdc)]n (2) (L1 = 1,5-bis(1-(pyridine-4-ylmethyl)-1H-benzo[d]imidazol-2-yl)pentane, L2 = 1,6-bis(1-(pyridine-4-ylmethyl)-1H-benzo[d]imidazol-2-yl)hexane, and H2tdc = 2,5-thiophenedicarboxylic acid) were hydrothermally synthesized and characterized. 1 displays a rare binodal (3,4)-connected 2D cem-d network, while 2 exhibits a 3D mog (moganite) framework. The two MOFs are highly thermally durable and water-stable in a wide pH range from 3 to 12. Interestingly, 1 and 2 represent the first reported examples of multi-responsive probes based on MOFs for selectively detecting levofloxacin, benzaldehyde, and Fe3+ ions with reusability. The luminescence sensing mechanisms of the two CPs were explored in detail.

Co(II) coordination polymer: Treatment activity on the chronic obstructive pulmonary disease by reducing the inflammatory cytokines releasing

In the current study, using a semi-flexible quadritopic N-donor ligand, 5,5′-bipyrimidine (bpym), a new azide-based coordination polymer, [Co(bpym)(N3)2]n (1), was synthesized and structurally characterized via the single crystal X-ray diffraction along with the elemental analysis. Its treatment activity on the chronic obstructive pulmonary disease (COPD) would be evaluated and the related mechanism was explored. Firstly, the ELISA (enzyme linked immunosorbent assay) detection assay was performed and the levels of the inflammatory cytokines were measured. In addition to this, the NF-κB signaling pathway activation in the lung epithelial cells was measured with the real time RT-PCR (reverse transcription-polymerase chain reaction). Both six-membered rings containing nitrogen and the azide group on the designed drug molecule were confirmed by molecular docking simulation to have activities to the NF-kappaB.

A (4,4)-connected zinc(II) coordination polymer constructed with the flexible 2-carboxy phenoxyacetate ligand: synthesis, conformation alteration and fluorescent properties

A new binary ZnII coordination polymer, [Zn(2-cpa)(H2O)] n (2D-Zn) has been prepared by a 120 °C hydrothermal reaction of zinc(II) sulfate heptahydrate and 2-carboxy phenoxyacetic acid (2-H2cpa) in the presence of potassium hydroxide. Single-crystal X-ray diffraction analysis shows that the ZnII ion is located in a deformed ZnO6 octahedron bonded by one water and three 2-carboxy phenoxyacetate (2-cpa) ligands. The 2-cpa exhibits pentadentate double bridging chelate-μ 3 coordination mode and connects adjacent ZnII ions to generate a corrugated (4,4)-connected layer structure. The structures, conformation of 2-cpa and photoluminescence spectra for 2D-Zn have been carefully analyzed and compared with its two closely related compounds ̶ 1D [Zn(2-cpa)(H2O)] n (1D-Zn) and mononuclear [Zn(2-cpa)(H2O)3] (0D-Zn). The results showed that the conformation of 2-cpa in 2D-Zn has the maximum alteration and the corresponding fluorescence emission peak of 2D-Zn has the largest red-shift of 62 nm compared with that of free 2-H2cpa.

A new thermostable Cu(II) coordination polymer: photocatalytic activity and application values on diabetes

A Cu(II) coordination polymer with the composition of [Cu₂(L)₂(4,4'-bipy)₂]_n·2 n(ClO₄) (1, HL = 4-methyl-L-phenylalanine and 4,4'-bipy is 4,4'-bipyridine), was successfully obtained by the reaction of the mixed ligand of HL and 4,4'-bipy with Cu(ClO₄)₂ · 6H₂O under solvothermal condition. The as-synthesized compound not only has high thermal stability until 275°C but also excellent photocatalytic activity for the methyl blue solution degradation under the irradiation of ultraviolet light. Furthermore, the compound's treatment activity on the diabetes was determined and its relevant mechanism was also studied. The cytotoxicity or hemolysis toxicity (HC50) of the synthesized compound was also evaluated in this research.

Stable Eu3+/Cu2+-Functionalized Supramolecular Zinc(II) Complexes as Fluorescent Probes for Turn-On and Ratiometric Detection of Hydrogen Sulfide

Fabrication of dual-emitting materials for H₂S sensing under environmental and biological conditions is currently of great interest. In this work, a new chemically stable metal supramolecular complex [Zn₂(pda)₂(H₂O)₃]·(H₂O)_0.5 (Znpda, pda = 1,10-phenanthroline-2,9-dicarboxylic acid), with accessible uncoordinated carboxylic oxygen sites, is solvothermally synthesized. It can serve as a host in luminescent hybrid composites. By incorporating Eu³⁺ and Cu²⁺ in the supramolecular coordination network, we obtained the dual-emitting hybrid material Eu³⁺/Cu²⁺@Znpda, which simultaneously shows intense ligand and weak Eu³⁺ emissions in HEPES buffer solution. Since H₂S can easily chelate with Cu²⁺ and recover the blocked "antenna effect" between the ligand and Eu³⁺, Eu³⁺/Cu²⁺@Znpda possesses both the turn-on and ratiomectric fluorescence response to H₂S. Accordingly, we designed an IMPLICATION logic gate for H₂S recognition by employing the fluorescence intensity ratio between the ligand and Eu³⁺ as the output signal. In addition, Eu³⁺/Cu²⁺@Znpda shows a fast response (<1 min) and high sensitivity (1.45 μM) to H₂S over other interfering species in the HEPES buffer solution, highlighting its potential use for H₂S sensing under environmental and biological conditions.