Removal of low concentration Cs(I) from water using Prussian blue

Stabilizing Zinc Hexacyanoferrate Cathode by Low Contents of Cs Cations for Aqueous Zn-Ion Batteries

Exploring cathode materials with excellent electrochemical performance is crucial for developing rechargeable aqueous zinc ion batteries (RAZIBs). Zinc hexacyanoferrate (ZnHCF), a promising candidate of cathode materials for RAZIBs, suffers from severe electrochemical instability issues. This work reports using low contents of alkaline metal cations as electrolyte additives to improve the cycle performance of ZnHCF. The cations with large sizes, particularly Cs+, changes the intercalation chemistry of ZnHCF in RAZIBs. During cycling, Cs+ cations co-inserted into ZnHCF stabilize the host structure. Meanwhile, a stable phase of CsZn[Fe(CN)6] forms on the ZnHCF cathode, suppressing the loss of active materials through dissolution. ZnHCF gradually converts to an electrochemically inert Zn-rich phase during long-term cycling in aqueous electrolyte, leading to irreversible capacity loss. Introducing Cs+ in the electrolyte inhibits this conversion reaction, resulting in the extended lifespan. Owing to these advantages, the capacity retention rate of ZnHCF/Zn full batteries increases from the original 7.0 % to a high value of 54.6 % in the electrolyte containing 0.03 M of Cs2SO4 after 300 cycles at 0.25 A ⋅ g-1. This research provides an in-depth understanding of the electrochemical behavior of ZnHCF in aqueous zinc electrolyte, beneficial for further optimizing ZnHCF and other metal hexacyanoferrates.

Tailoring abundant active-oxygen sites of Prussian blue analogues-derived adsorbents for highly efficient Yb(III) capture

The removal of rare earth elements in mineral processing wastewater is highly desirable but still challenging. In this study, three bimetallic Prussian blue analogues (PBA) and six corresponding oxides are prepared by co-precipitation and calcination methods, and then utilized to adsorb aqueous Yb(III) solution. The results of XRD, SEM, BET, and XPS indicate the successful synthesis of all the adsorbents. Among them, three PBA-oxide samples (PBO-800) exhibit the superior adsorption capacities (˃250 mg/g). The adsorption processes of Yb(III) are in accordance with the pseudo-second-order kinetic model and Langmuir model, simultaneously showing the spontaneous and endothermic thermodynamics. Moreover, PBO-800 can be reused after alkaline solution regeneration with less than 10% degradation after five consecutive adsorption-desorption cycles. More importantly, PBO-800 exhibits the impressive separation selectivity of Yb(III) and most light rare earth ions (e.g., 5.51 of Yb/La, 4.03 of Yb/Pr), as well as the selectivity of Yb(III) and alkali metal ions (e.g., 300.5 of Yb/Na, 256.2 of Yb/Ca). According to the characterization analysis and DFT calculation, the adsorption mechanism of Yb(III) by PBO-800 is mainly attributed to the strong interaction between the abundant active-oxygen sites and Yb(III), and the significant electrostatic attraction.

Estimation of 137Cs Distribution and Recovery Using Various Types of Sorbents in the Black Sea Surface Layer

Monitoring 137Cs in seawater is necessary for the timely detection of radioactive contamination. The possibility of sorption and the sorption efficiency of 137Cs from seawater were studied for the first time during several cruises of the R/V (research vessel) Professor Vodyanitsky using various types of sorbents based on transition metal ferrocyanides (Anfezh, Niket, Uniket, FSS, FD-M, FIC, Termoxid 35, NKF-C) and zirconium phosphate (Termoxid 3A). The influence of the seawater flow rate and volume of the sorbent used for the recovery of 137Cs was estimated. The ferrocyanide sorbents Niket, Uniket, Termoxid 35, and FIC showed the best sorption efficiency (60–100%) at a seawater flow rate of 2–4 column volumes per minute. The data obtained during three cruises on the R/V Professor Vodyanitsky were analyzed. A detailed (28 sampling points) spatial distribution of 137Cs in the Black Sea along the southern coast of Crimea was studied using the sorbents that showed the best characteristics. An increase in 137Cs activity in the study area was not found, and the average activity was 9.01 ± 0.87 Bq/m3.

Hotspots analysis and perspectives of Prussian blue analogues (PBAs) in environment and energy in recent 20 years by CiteSpace

Prussian blue analogs (PBAs), a type of metal-organic frameworks (MOFs), have attracted much attention because of their large specific surface area, high porosity, easy synthesis, and low cost. This paper presents the first review of PBAs by applying the bibliometric visualization software CiteSpace. The co-occurrence, co-citation, and clustering analysis of 2214 articles in the Web of Science database on the topic of "Prussian blue analogs" over the past 20 years were performed. The results provide a comprehensive overview of the evolution of the research hotspots for this material, and most importantly, it is identified that the research hotspots and trends for PBAs materials are concentrated in the environmental and energy fields. For example, the material is used as an adsorbent or catalyst to reduce pollutants, produce clean energy, or for energy storage applications such as batteries or supercapacitors. Finally, some outlooks are provided on the future research trends of this material in the environmental and energy fields, presenting the challenges faced by this material. For instance, the conductivity and corrosion resistance of the material needs to be improved and secondary contamination should be decreased or even avoided. It is believed that this paper would provide a comprehensive, systematic, and dynamic overview of the research of PBAs, and promote the future research of PBAs in the fields of environment and energy.

Radiation effects, zero thermal expansion, and pressure-induced phase transition in CsMnCo(CN)6

The Prussian blue analogue CsMnCo(CN)₆ is studied using powder X-ray and neutron diffraction under variable temperature, pressure, and X-ray exposure. It retains cubic F4̄3m symmetry in the range 85-500 K with minimal thermal expansion, whereas a phase transition to P4̄n2 occurs at ∼2 GPa, driven by octahedral tilting. A small lattice contraction occurs upon increased X-ray dose. Comparisons with related systems indicate that the Cs^I ions decrease the thermal expansion and suppress the likelihood of phase transformations. The results improve the understanding of the stimuli-responsive behaviour of coordination polymers.

Phytic Acid Doped Polyaniline as a Binding Coating Promoting Growth of Prussian Blue on Cotton Fibers for Adsorption of Copper Ions

In recent years, the elimination of heavy metals from wastewater has become an important topic due to rapid industrialization, and it is of considerable interest to develop renewable and degradable materials for this purpose. In this work, a novel Prussian blue/polyaniline@cotton fibers (PB/PANI@CFs) composite was fabricated by a two-step process. Phytic acid doped PANI as a binding coating greatly promoted both the growth of PB and the adsorption of Cu2+. The deposition ratio of PB was as high as 24.68%. Scanning electron microscopy (SEM) displayed that PB nanoparticles were grown more uniformly in the composite and formed a perfect nanocube structure compared with PB@CFs. The successful deposition of both PB and PANI on CFs was demonstrated by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FITR), and X-ray photoelectron spectroscopy (XPS). The effect of adsorption time, adsorbent dose, initial pH value, and initial copper sulphate concentration on the adsorption of PB/PANI@CFs composite for Cu2+ was studied by static adsorption and was compared with those of PANI@CFs and PB@CFs. The results showed that the maximum removal efficiency of Cu2+ by PB/PANI@CFs can reach 93.4% within 5 h, and the maximum adsorption capacity of Cu2+ can reach 31.93 mg·g−1. The adsorption of Cu2+ on PB/PANI@CFs followed the pseudo-second order kinetic model and conformed to the Freundlich adsorption isothermal model. The PB-functionalized CFs provided new insights into the design of efficient and low-cost absorbents for heavy metal remediation. The proposed process solves two problems simultaneously, i.e., the utilization of environmentally friendly and biodegradable biomass resources and the adsorption of heavy metal ions, and is a good approach to achieve high-quality and sustainable development.

Molecular Approach to Alkali-Metal Encapsulation by a Prussian Blue Analogue FeII/CoIII Cube in Aqueous Solution: A Kineticomechanistic Exchange Study

The preparation of a series of alkali-metal inclusion complexes of the molecular cube [{Co^III(Me₃-tacn)}₄{Fe^II(CN)₆}₄]^4- (Me₃-tacn = 1,4,7-trimethyl-1,4,7-triazacyclononane), a mixed-valent Prussian Blue analogue bearing bridging cyanido ligands, has been achieved by following a redox-triggered self-assembly process. The molecular cubes are extremely robust and soluble in aqueous media ranging from 5 M [H⁺] to 2 M [OH^-]. All the complexes have been characterized by the standard mass spectometry, UV-vis, inductively coupled plasma, multinuclear NMR spectroscopy, and electrochemistry. Furthermore, X-ray diffraction analysis of the sodium and lithium salts has also been achieved, and the inclusion of moieties of the form {M-OH₂}⁺ (M = Li, Na) is confirmed. These inclusion complexes in aqueous solution are rather inert to cation exchange and are characterized by a significant decrease in acidity of the confined water molecule due to hydrogen bonding inside the cubic cage. Exchange of the encapsulated cationic {M-OH₂}⁺ or M⁺ units by other alkali metals has also been studied from a kineticomechanistic perspective at different concentrations, temperatures, ionic strengths, and pressures. In all cases, the thermal and pressure activation parameters obtained agree with a process that is dominated by differences in hydration of the cations entering and exiting the cage, although the size of the portal enabling the exchange also plays a determinant role, thus not allowing the large Cs⁺ cation to enter. All the exchange substitutions studied follow a thermodynamic sequence that relates with the size and polarizing capability of the different alkali cations; even so, the process can be reversed, allowing the entry of {Li-OH₂}⁺ units upon adsorption of the cube on an anion exchange resin and subsequent washing with a Li⁺ solution.

Sorption methods in marine radiochemistry

The review presents the general methodology of using sorption methods to solve problems of marine radiochemistry, including sampling, preconcentration and radiochemical preparation and methods for measuring the activity of radionuclides. The possible methodological errors at various stages of sampling and sample concentration are discussed. The most widely used artificial (90Sr, 134Cs, 137Cs, 239Pu, 240Pu), natural (210Pb, 210Po; radium quartet: 223Ra, 224Ra, 226Ra, 228Ra; thorium isotopes, mainly 234Th) and cosmogenic (7Be, 32P, 33P) radiotracers are considered. The sorption of uranium from seawater is not addressed, since its concentration in seawater is usually calculated from the known dependence of uranium concentration on seawater salinity.

The bibliography includes 200 references.