Impact of surface properties on morphology of spray-dried milk serum protein/lactose systems

Exploring vacuum foam drying as an alternative to freeze-drying and spray drying for a human lipase

This article compares and explores vacuum foam-drying as an alternative drying technology to freeze-drying and spray drying for a recombinant human lipase as the model protein. Materials characteristics such as structure, surface composition and the solid-state properties of the dry materials were compared and investigated. Moreover, the technical functionality in terms of reconstitution characteristics and the lipase stability were also investigated. The stability of the lipase was evaluated through activity measurements. Sucrose and dextran D40 (40 kDa) were used as matrix former and the surfactant α-dodecyl maltoside was used as surface active additive. The study demonstrated that the drying technique greatly influenced the material structure and composition which in turn affected the reconstitution characteristics. The lipase was overrepresented at the material surface in declining order spray-dried > vacuum foam-dried > freeze-dried. The lipase activity was retained up to 10 % lipase content in solids, but at 20 % lipase a loss of activity was observed for all drying techniques. Phase separation in the solid material may be an explanation. Vacuum foam-drying shows promise as an alternative drying technique for the lipase, and potentially other proteins.

Formulation factors affecting foam properties during vacuum foam-drying

This paper explores how vacuum foam-drying of a protein is influenced by formulation parameters by investigating the foam structure, physical properties of the foam, and the stability of the protein. Recombinant human bile salt-stimulated lipase was used as a model of a protein drug. The stability of the lipase was evaluated through activity measurements. Two disaccharides (sucrose and trehalose), strongly tending to an amorphous form, were used as matrix formers, and the physical properties were assessed through residual water content, glass transition temperature, and crystalline state. Moreover, some formulations included surfactants with different sizes and structures of the head group. The alkyl chain length was kept constant to only investigate the impact of the surfactant head group, in the presence of the lipase, on the foamability and surface coverage of the lipase. The study demonstrated that the lipase allowed for a dry, solid foam with a foam overrun of up to 2600 %. The wall thickness of the dry, solid foam was estimated to be 20-50 µm. Clear differences between sucrose and trehalose as matrix former were identified. The lipase showed no tendency to lose activity because of the drying and rehydration, despite a proportion of the lipase covering the surfaces of the dry material.

Mining association rules between the granulation feasibility and physicochemical properties of aqueous extracts from Chinese herbal medicine in fluidized bed granulation

Fluidized bed granulation (FBG) is a widely used granulation technology in the pharmaceutical industry. However, defluidization caused by the formation of large aggregates poses a challenge to FBG, particularly in traditional Chinese medicine (TCM) due to its complex physicochemical properties of aqueous extracts. Therefore, this study aims to identify the complex relationships between physicochemical characteristics and defluidization using data mining methods. Initially, 50 types of TCM were decocted and assessed for their potential influence on defluidization using a set of 11 physical properties and 10 chemical components, utilizing the loss rate as an evaluation index. Subsequently, the random forest (RF) and Apriori algorithms were utilized to uncover intricate association rules among physicochemical characteristics and defluidization. The RF algorithm analysis revealed the top 8 critical factors associated with defluidization. These factors include physical properties like glass transition temperature (Tg) and dynamic surface tension (DST) of DST100ms, DST1000ms, DST10ms and conductivity, in addition to chemical components such as fructose, glucose and protein contents. The results from Apriori algorithm demonstrated that lower Tg and conductivity were associated with an increased risk of defluidization, resulting in a higher loss rate. Moreover, DST100ms, DST1000ms and DST10ms exhibited a contrasting trend in the physical properties Specifically, defluidization probability increases when Tg and conductivity dip below 29.04℃ and 6.21 ms/m respectively, coupled with DST10ms, DST100ms and DST1000ms values exceeding 70.40 mN/m, 66.66 mN/m and 61.58 mN/m, respectively. Moreover, an elevated content of low molecular weight saccharides was associated with a higher occurrence of defluidization, accompanied by an increased loss rate. In contrast, protein content displayed an opposite trend regarding chemical properties. Precisely, the defluidization likelihood amplifies when fructose and glucose contents surpass 20.35 mg/g and 34.05 mg/g respectively, and protein concentration is less than 1.63 mg/g. Finally, evaluation criteria for defluidization were proposed based on these results, which could be used to avoid this situation during the granulation process. This study demonstrated that the RF and Apriori algorithms are effective data mining methods capable of uncovering key factors affecting defluidization.

Encapsulation of Bromelain in Combined Sodium Alginate and Amino Acid Carriers: Experimental Design of Simplex-Centroid Mixtures for Digestibility Evaluation

Bromelain has potential as an analgesic, an anti-inflammatory, and in cancer treatments. Despite its therapeutic effects, this protein undergoes denaturation when administered orally. Microencapsulation processes have shown potential in protein protection and as controlled release systems. Thus, this paper aimed to develop encapsulating systems using sodium alginate as a carrier material and positively charged amino acids as stabilizing agents for the controlled release of bromelain in in vitro tests. The systems were produced from the experimental design of centroid simplex mixtures. Characterizations were performed by FTIR showing that bromelain was encapsulated in all systems. XRD analyses showed that the systems are semi-crystalline solids and through SEM analysis the morphology of the formed systems followed a pattern of rough microparticles. The application of statistical analysis showed that the systems presented behavior that can be evaluated by quadratic and special cubic models, with a p-value < 0.05. The interaction between amino acids and bromelain/alginate was evaluated, and free bromelain showed a reduction of 74.0% in protein content and 23.6% in enzymatic activity at the end of gastric digestion. Furthermore, a reduction of 91.6% of protein content and 65.9% of enzymatic activity was observed at the end of intestinal digestion. The Lis system showed better interaction due to the increased stability of bromelain in terms of the amount of proteins (above 63% until the end of the intestinal phase) and the enzymatic activity of 89.3%. Thus, this study proposes the development of pH-controlled release systems aiming at increasing the stability and bioavailability of bromelain in intestinal systems.

Understanding the factors affecting the surface chemical composition of dairy powders: a systematic review

Dairy powder, with abundant chemical components such as protein, fat, and lactose possessing diverse physical and chemical structures, can exhibit a surface composition distinct from its bulk content during the conversion of liquid milk into dry powder. Surface chemical composition is a significant parameter in the dairy industry, as it is directly associated with the techno-functional properties of dairy powder products. The current work provides an overview of the factors influencing the surface composition of dairy powders such as the bulk composition of raw milk (animal source and formulation), liquid dairy processing (homogenization, thermal treatment, and evaporation), the drying process (drying methods as well as operating conditions during the most commonly used spray drying), and storage conditions (temperature, relative humidity, and duration). The underlying mechanisms involved in the variations of particle surface composition include the mechanical properties of emulsion, milk fat globules redistribution caused by mechanical forces, adsorption competition and interactions of ingredients at the water/air interface, dehydration-induced alterations in particle structure, corresponding solid/solutes segregation differentiation during spray drying, and lactose crystallization-induced increase in surface fat during storage. Additionally, future research is suggested to explore the effects of emerging processing technologies on the surface composition modification of dairy powders.