Heat-induced changes in caseins and casein micelles, including interactions with denatured whey proteins

Comparative proteomic analysis of donor human milk treated by high-pressure processing or Holder pasteurization on undigested proteins across dynamic simulated preterm infant digestion

High-pressure processing (HPP) of donor human milk (DM) minimally impacts the concentration and bioactivity of some important bioactive proteins including lactoferrin, and bile salt-stimulated lipase (BSSL) compared to Holder pasteurization (HoP), yet the impact of HPP and subsequent digestion on the full array of proteins detectable by proteomics remains unclear. We investigated how HPP impacts undigested proteins in DM post-processing and across digestion by proteomic analysis. Each pool of milk (n = 3) remained raw, or was treated by HPP (500 MPa, 10 min) or HoP (62.5 °C, 30 min), and underwent dynamic in vitro digestion simulating the preterm infant. In the meal, major proteins were minimally changed post-processing. HPP-treated milk proteins better resisted proximal digestion (except for immunoglobulins, jejunum 180 min) and the extent of undigested proteins after gastric digestion of major proteins in HPP-treated milk was more similar to raw (e.g., BSSL, lactoferrin, macrophage-receptor-1, CD14, complement-c3/c4, xanthine dehydrogenase) than HoP.

Exploration of dynamic interaction between β-lactoglobulin and casein micelles during UHT milk process

The protein aggregation induced by UHT treatment shortens the shelf life of UHT milk. However, the mechanism of β-Lg induced casein micelle aggregation remains unclear. Herein, the dynamic interaction between β-Lg and casein micelles during UHT processing was investigated by experimental techniques and molecular dynamics simulations. Results showed that β-Lg decreased the stability of casein micelles, increased their size and zeta potential. Raman and FTIR spectra analysis suggested that hydrogen and disulfide bonds facilitated their interaction. Cryo-TEM showed that the formation of the casein micelle/β-Lg complex involved rigid binding, flexible linking, and severe cross-linking aggregation during UHT processing. SAXS and MST demonstrated β-Lg bound to κ-casein on micelle surfaces with a dissociation constant (Kd) of 3.84 ± 1.14 μm. Molecular docking and dynamic simulations identified the interacting amino acid residues and clarified that electrostatic and van der Waals forces drove the interaction. UHT treatment increased hydrogen bonds and decreased total binding energy. The non-covalent binding promoted the formation of disulfide bonds between β-Lg and casein micelles under heat treatment. Ultimately, it was concluded that non-covalent interaction and disulfide bonding resulted in casein micelle/β-Lg aggregates. These findings provided scientific insights into protein aggregation in UHT milk.

Invited review: Modeling milk stability

Novel insights into the stability of milk and milk products during storage and processing result from describing caseins near neutral pH as hydrophilic, intrinsically disordered, proteins. Casein solubility is strongly influenced by pH and multivalent ion binding. Solubility is high at a neutral pH or above, but decreases as the casein net charge approaches zero, allowing a condensed casein phase or gel to form, then increases at lower pH. Of particular importance for casein micelle stability near neutral pH is the proportion of free caseins in the micelle (i.e., caseins not bound directly to nanoclusters of calcium phosphate). Free caseins are more soluble and better able to act as molecular chaperones (to prevent casein and whey protein aggregation) than bound caseins. Some free caseins are highly phosphorylated and can also act as mineral chaperones to inhibit the growth of calcium phosphate phases and prevent mineralized deposits from forming on membranes or heat exchangers. Thus, casein micelle stability is reduced when free caseins bind to amyloid fibrils, destabilized whey proteins or calcium phosphate. The multivalent-binding model of the casein micelle quantitatively describes these and other factors affecting the stability of milk and milk protein products during manufacture and storage.

Discrimination of overheated pasteurized milk using mass spectrometry-based proteomics

Milk is one of the most widely consumed foods globally. To protect consumer interests, it is essential to establish an analytical method to detect the degree of heating in milk. A novel approach using nano liquid chromatography-orbitrap fusion mass spectrometer was developed for screening and identifing thermally sensitive peptides markers in the milk heating process (below 100 °C). This method integrates untargeted proteomics and chemometric tools to analyze protein quantitation data from differently heat-treated milk. Thirteen potential markers were screened out and identified, and further confirmed using by standard substances. Then, the accurate concentrations of 13 potential markers determined by isotope-dilution ultra-performance liquid chromatography-tandem triple quadrupole mass spectrometry were further mining the highly specific and thermally sensitive peptides markers. And Four peptides-INLFDTPLETQYVR, FELLGCELNGCTEPLGLK, QFQFIQVAGR, and GEADALNLDGGYIYTAGK-were selected as marker peptides to differentiate normal pasteurized milk from overheated pasteurized milk. The concentrations of INLFDTPLETQYVR ranges from 150 ± 11 µg/L to 350 ± 23 µg/L, while the concentrations of FELLGCELNGCTEPLGLK ranges from 40 ± 5 µg/L to 92 ± 3 µg/L, can distinguish normal pasteurized milk from overheated pasteurized milk. QFQFIQVAGR indicates overheated pasteurized milk at 230 ± 21 µg/L, and GEADALNLDGGYIYTAGK signifies 750 ± 43 µg/L. This study provides new insights for distinguishing overheated pasteurized milk.

Protein of yak milk residue: Structure, functionality, and the effects on the quality of non-fat yogurt

The purpose of this study was to compare the structural and functional of protein from yak milk residue, which collected from different elevations (MRP1 and MRP2) in Tibet, as well as their potential for enhancing the quality of non-fat yogurt. The results showed that MRP1 exhibited higher levels of β-sheet, turbidity, particle size, and gel properties. MRP2 had better flexibility, emulsification, foaming, water/oil absorption capacity. The addition of MRP1 (3%) could improve texture and sensory properties of yogurt. Although MRP2 yogurt had higher hardness, gumminess, chewiness and water holding capacity, poor mouthfeel. Rheological test showed that MRPs yogurt exhibited typical gel-like and shear-thinning behavior. Moreover, the fortification of non-fat yogurts with MRP1 brought the formation of larger protein clusters with a more tightly knit network of smaller pores. These results indicate that MRP1 can be used as a fat substitute to improve the quality of non-fat yogurt.

Whey protein hydrolysates and infant formulas: Effects on physicochemical and biological properties

Whey protein hydrolysates are recognized for their substantial functional and biological properties. Their high digestibility and amino acid composition make them a valuable ingredient to hydrolyzed whey infant formulas, enhancing both product functionality and nutritional values for infant growth. It is important to understand the functional and biological properties of whey protein hydrolysates for their applications in infant formula systems. This review explored preparation methods of whey protein hydrolysates for infant formula-based applications. The effects of whey protein hydrolysate on the physicochemical and biological properties of hydrolyzed whey infant formulas were summarized. The influences of whey protein hydrolysates on the functional and nutritional properties of formulas from manufacturing to infant consumption were discussed. Whey protein hydrolysates are crucial components in the preparation of infant formula, tailored to meet the functional and nutritional demands of the product. The selection of enzyme types and hydrolysis parameters is decisive for obtaining "optimal" whey protein hydrolysates that match the intended characteristics. "Optimal" whey protein hydrolysates offer diverse functionalities, including solubility, emulsification and production stability to hydrolyzed whey infant formulas during manufacturing processes and formulations. They simultaneously promote protein digestibility, infant growth and other potential health benefits, including reduced allergenic potential, as supported by in vitro, in vivo and clinical trials. Overall, the precise selection of enzymes and hydrolysis parameters in the production of whey protein hydrolysates is crucial in achieving the desired characteristics and functional benefits for hydrolyzed whey infant formulas, making them critical in the development of infant nutrition products.

Health-Related Outcomes and Molecular Methods for the Characterization of A1 and A2 Cow's Milk: Review and Update

A new trend in cow's milk has emerged in the market called type A1 and A2 milk. These products have piqued the interest of both consumers and researchers. Recent studies suggest that A2 milk may have potential health benefits beyond that of A1 milk, which is why researchers are investigating this product further. It is interesting to note that the A1 and A2 milk types have area-specific characteristics compared to breed-specific characteristics. Extensive research has focused on milk derivatives obtained from cow's milk, primarily through in vitro and animal studies. However, few clinical studies have been conducted in humans, and the results have been unsatisfactory. New molecular techniques for identifying A1 and A2 milk may help researchers develop new studies that can clarify certain controversies surrounding A1 milk. It is essential to exercise extreme caution when interpreting the updated literature. It has the potential to spread panic worldwide and have negative economic implications. Therefore, this study aims to investigate the differences between A1 and A2 milk in various research areas and clarify some aspects regarding these two types of milk.

Physicochemical and Sensory Characterization of Whey Protein-Enriched Semihard Cheese

In view of potential future changes of German food legislation with regard to cheese product quality parameters, this study aimed to evaluate the quality of whey protein-enriched semihard cheese (WPEC). Model WPEC was produced in a pilot plant and on an industrial scale by adding defined amounts of high-heat (HH) milk to the cheese milk and comprehensively analyzed during cheese processing. The dry matter, total protein, pure protein, fat, and sodium chloride content of six-week ripened cheese samples were not significantly different (p < 0.05) when the technologically necessary heating of the curd was adapted to the amount of HH milk. However, the ripening, firmness, and melting behavior of WPEC was different compared to cheese without HH milk. During ripening, no formation of whey protein peptides was observed, but differences in the amount of some bitter peptides deriving from the casein fraction were found. Sensory data suggested a slightly more bitter taste perception by the panelists for the WPEC. Further technological adjustments are recommended to obtain marketable WPEC.

Characterization of protein aggregates in cream and skimmed human milk after heat and high-pressure pasteurization treatments

Preservation processes applied to ensure microbial safety of human milk (HM) can modify the native structure of proteins and their bioactivities. Consequently, this study evaluated the effect of pasteurization methods (Holder pasteurization, high-temperature short-time (HTST), and high hydrostatic pressure (HHP)) of whole human milk (HM) on protein aggregates in skim milk and cream fractions. For heat-treated whole milk, insoluble protein aggregates at milk fat globule membrane (MFGM) were formed by disulfide and non-covalent bonds, but insoluble skim milk protein aggregates were only stabilized by non-covalent interactions. Contrary to heat treatment, the insolubilization of main proteins at the MFGM of HHP-treated HM was only through non-covalent interactions rather than disulfide bonds. Moreover, only heat treatment induced the insoluble aggregation of ⍺-lactalbumin. Overall, compared to heat treatment, HHP produced a milder effect on protein aggregation, validating the use of this process to better preserve the native state of HM bioactive proteins.

Influence of pH on Heat-Induced Changes in Skim Milk Containing Various Levels of Micellar Calcium Phosphate

The present study investigated the effect of micellar calcium phosphate (MCP) content and pH of skim milk on heat-induced changes in skim milk. Four MCP-adjusted samples, ranging from 67 to 113% of the original MCP content, were heated (90 °C for 10 min) at different pH values (6.3, 6.6, 6.9, and 7.2), followed by determining changes in particle size, turbidity, protein distribution, and structure. The results demonstrate a strong effect of MCP level and pH on heat-induced changes in milk, with the MCP67 samples revealing the greatest thermal stability. Specifically, decreasing MCP content by 33% (MCP67) led to a smaller increase in non-sedimentable κ-casein and a lower decrease in αs2-casein concentrations after heating compared to other samples. Lower MCP content resulted in a moderate rise in the average particle size and turbidity, along with lower loading of β-turn structural component after heating at low pH (pH 6.3). Notably, MCP113 exhibited instability upon heating, with increased particle size, turbidity, and a significant decrease in non-sedimentable αs2-casein concentration, along with a slight increase in non-sedimentable κ-casein concentration. The FTIR results also revealed higher loading of intermolecular β-sheet, β-turn, and random coil structures, as well as lower loading of α-helix and β-sheet structures in MCP-enhanced skim milk samples. This suggests significant changes in the secondary structure of milk protein and greater formation of larger aggregates.

Effects of Pulsed Electric Field on the Physicochemical and Structural Properties of Micellar Casein

Pulsed electric field (PEF) as a green processing technology is drawing greater attention due to its eco-friendliness and potential to promote sustainable development goals. In this study, the effects of different electric field strengths (EFS, 0-30 kV/cm) on the structure and physicochemical features of casein micelles (CSMs) were investigated. It was found that the particle sizes of CSMs increased at low EFS (10 kV/cm) but decreased at high EFS (30 kV/cm). The absolute ζ-potential at 30 kV/cm increased from -26.6 (native CSMs) to -29.5 mV. Moreover, it was noticed that PEF treatment leads to changes in the surface hydrophobicity; it slightly increased at low EFS (10 kV/cm) but decreased at EFS > 10 kV/cm. PEF enhanced the protein solubility from 84.9 (native CSMs) to 87.1% (at 10 kV/cm). PEF at low EFS (10 kV/cm) intensified the emission fluorescence spectrum of CSMs, while higher EFS reduced the fluorescence intensity compared to native CSMs. Moreover, the analysis of the Amide Ι region showed that PEF-treated CSMs reduced the α-helix and increased the β-sheet content. Raman spectra confirmed that PEF treatment > 10 kV/cm buried tyrosine (Tyr) residues in a hydrophobic environment. It was also found that PEF treatment mainly induced changes in the disulfide linkages. In conclusion, PEF technology can be employed as an eco-friendly technology to change the structure and physiochemical properties of CSMs; this could improve their techno-functional properties.

A mini-review about direct steam heating and its application in dairy and plant protein processing

The world's requirement for plant protein consumption is increasing. However, their application in different foods is limited due to their low techno-functionality. Heating is the most widely used method to improve the functionality of proteins. Compared to indirect tubular or plate heating methods, direct steam injection heating (DSIH) can heat the sample much faster, thus modifying the structure and functionality of protein differently. It is used in the sterilization of milk to minimize the heat-induced denaturation of whey proteins and the loss of volatiles. By contrast, its application in producing plant protein ingredients is seldom. This review summarizes recent research using DSIH to process dairy- and plant-based proteins and proposes future research perspectives. DSIH is a promising technique for producing functional protein ingredients. It is of particular interest to overcome the techno-functional hurdles of plant protein blends using DSIH to improve their behavior in different food matrices.

Optimization of Melanin Production by Streptomyces antibioticus NRRL B-1701 Using Arthrospira (Spirulina) platensis Residues Hydrolysates as Low-Cost L-tyrosine Supplement

Melanin is a functional pigment that is used in various products. It can be produced by Streptomyces antibioticus NRRL B-1701 when supplemented with L-tyrosine. Arthrospira (Spirulina) platensis is a cyanobacterium with high protein content, including the protein phycocyanin (PC). During PC's extraction, biomass residues are generated, and these residues still contain various amino acids, especially L-tyrosine, which can be used as a low-cost supplement for melanin production. Thus, this study employed a hydrolysate of A. platensis biomass residue for L-tyrosine substitution. The effects of two drying methods, namely, lyophilization and dying via a hot air oven, on the proximate composition and content of L-tyrosine in the biomass residue were evaluated. The highest L-tyrosine (0.268 g L-tyrosine/100 g dried biomass) concentration was obtained from a hot-air-oven-dried biomass residue hydrolysate (HAO-DBRH). The HAO-DBRH was then used as a low-cost L-tyrosine supplement for maximizing melanin production, which was optimized by the response surface methodology (RSM) through central composite design (CCD). Using the RSM-CCD, the maximum level of melanin production achieved was 0.24 g/L, which is approximately four times higher than it was before optimization. This result suggests that A. platensis residue hydrolysate could be an economically feasible and low-cost alternative source of L-tyrosine for the production of melanin.

Thickening mechanism of recombined dairy cream stored at 4 °C: Changes in the composition and structure of milk protein under different sterilization intensities

This work elucidates the mechanism involved in the effect of varying sterilization intensities on RDC thickening via comparative analysis of the changes in the composition and structure of RDC interfacial protein after storage at 4 °C and at 25 °C. The results showed that pasteurized RDCs (75 °C for 16 s, 90 °C for 5 min) and high-temperature sterilized RDCs (105 °C for 3 min, 115 °C for 7 min and 121 °C for 7 min) did not thicken during storage at 25 °C, and had lower viscosities and higher Ca²⁺ concentrations than those stored at 4 °C. Whey protein (WP) aggregates were found to have been adsorbed at the interface of high-temperature treated RDCs stored at 4 °C, leading to the aggregation of fat globules and, consequently, reversible thickening. However, high-temperature sterilized RDCs underwent into irreversible thickening at 10 d, 7 d and 3 d. This phenomenon was attributed to the large amount of heat-induced whey protein and κ-casein complex that was absorbed on the oil-water interface, with Ca²⁺ bonded to form bridging flocculation, which altered the secondary structure of the interfacial protein to one with increased β-sheet content and decreased random coil content.

Effects of different temperatures of carbohydrate-protein-containing drinks on gastric emptying rate after exercise in healthy young men: randomized crossover trial

Background

The present study examined the effects of different temperatures of carbohydrate-protein-containing drinks after exercise on the subsequent gastric emptying rate in healthy young men.

Methods

Twelve healthy young men completed two, 1-day trials in random order. In both trials, the participants completed intermittent cycling exercise for 20 min, consisting of a 120% heart rate peak for 20 s, followed by 25 W for 40 s. Participants consumed 400 mL of carbohydrate-protein-containing drink (0.85 MJ) at 4 °C (EX + 4 °C) or 60 °C (EX + 60 °C) over a 5-min period after exercise. The participants sat on a chair for 2.5 h to measure their gastric emptying rate using the ¹³C-sodium acetate breath test. Subjective feelings of gastrointestinal discomfort and appetite were measured using a visual analog scale. Interstitial fluid glucose levels after drinking were measured using a continuous glucose-monitoring device.

Results

The percentage excretion of ¹³CO₂ tended to be higher at EX + 60 °C than at EX + 4 °C from the start of the test until 30 min after drink ingestion (5.7 ± 0.5 vs. 6.5 ± 0.4%dose/h for the EX + 4 °C and EX + 60 °C trials, respectively; effect sizes [ES] = 0.277, p = 0.065). The time of maximum ¹³CO₂ emissions per hour (Tmax-calc) and the time of half ¹³CO₂ emissions per hour (T_1/2) did not differ between trials. Subjective gastrointestinal discomfort was lower at EX + 60 °C compared to EX + 4 °C (ES = 0.328, p = 0.041). There were no significant differences in interstitial fluid glucose levels between the different temperatures of carbohydrate-protein-containing drinks after exercise (p = 0.698).

Conclusions

Consumption of warm carbohydrate-protein-containing drinks after exercise may accelerate gastric emptying in the very early phase and may reduce gastric discomfort.

Trial registration

University Hospital Medical Information Network, UMIN000045626. Registered on June 10, 2021.

Nutritional Profile, Processing and Potential Products: A Comparative Review of Goat Milk

Goat milk contains an abundance of different macro and micro-nutrients. Compared with other milk, goat milk is a viable option due to its low allergy levels and is preferred for infants with cow milk allergies. A wide variety of goat milk-based products, including yoghurt, ice cream, fermented milk, and cheese, are available on the market. They are produced using effective processing technology and are known to exhibit numerous health benefits after consumption. However, goat milk consumption is limited in many nations (compared with cow, buffalo, camel, and sheep milk) due to a lack of awareness of its nutritional composition and the significance of its different byproducts. This review provides a detailed explanation of the various macronutrients that may be present, with special attention paid to each component, its purpose, and the health benefits it offers. It also compares goat milk with milk from other species in terms of its superiority and nutritional content, as well as the types, production methods, health advantages, and other beneficial properties of the various goat milk products that are currently available on the market.

What is the impact of amino acid mutations in the primary structure of caseins on the composition and functionality of milk and dairy products?

The impact of amino acid mutations within the peptide structure of bovine milk protein is important to understand as it can effect processability and subsequently effect its physiological properties. Genetic polymorphisms of bovine caseins can influence the chemical, structural, and technological properties, including casein micelle morphology, calcium distribution, network creation upon gelation, and surface activity. The A1 and A2 genetic variants of β-casein have recently acquired growing attention from both academia and industry, prompting new developments in the area. The difference between these two genetic variants is the inclusion of either proline in β-casein A2 or histidine in β-casein A1 at position 67 in the peptide chain. The aim of this review was to examine the extent to which milk and ingredient functionality is influenced by β-casein phenotype. One of the main findings of this review was although β-casein A1 was found to be the dominant variant in milks with superior acid gelation and rennet coagulation properties, milks comprised of β-casein A2 possessed greater emulsion and foam formation capabilities. The difference in the casein micelle assembly, hydrophobicity, and chaperone activity of caseins may explain the contrast in the functionality of milks containing β-casein from either A1 or A2 families. This review provides new insights into the subtle variations in the physicochemical properties of bovine milks, which could potentially support dairy producers in the development of new dairy products with different functional properties.

•

Impact of β- and other caseins on the casein micelle structure and functionality.

•

Proline and histidine in β-caseins play a key role in casein micelle conformation.

•

Chaperone activity of β-casein A2 towards heat-induced aggregation of whey protein.

•

Gels prepared of milks with β-casein A1 possess a denser and firmer structure.

•

Ordered structure of β-casein A2 led to improved emulsion and foam formation.

Detecting the Bitterness of Milk-Protein-Derived Peptides Using an Electronic Tongue

Bitterness is a considerable limiting factor for the application of bioactive peptides in the food industry. The objective of this study was to compare the level of bitterness of milk-protein-derived peptides using an electronic tongue (E-tongue). Liquid milk protein concentrate (LMPC) was prepared from ultra-heat-treated skimmed cow’s milk. It was initially hydrolyzed with different concentrations of trypsin, namely, 0.008 g·L−1, 0.016 g·L−1 and 0.032 g·L−1. In a later exercise, tryptic-hydrolyzed LMPC (LMPC-T) was further hydrolyzed using Lactobacillus bulgaricus and Streptococcus thermophilus. The effect of glucose in microbial hydrolysis was studied. The bitterness of peptides was evaluated with respect to quinine, a standard bittering agent. The level of bitterness of the peptides after microbial hydrolysis of LMPC-T (LMPC-T-F and LMPC-T-FG) was evaluated using a potentiometric E-tongue equipped with a sensor array that had seven chemically modified field-effect transistor sensors. The results of the measurements were evaluated using principal component analysis (PCA), and subsequently, a classification of the models was built using the linear discriminant analysis (LDA) method. The bitterness of peptides in LMPC-T-F and LMPC-T-FG was increased with the increase in the concentration of trypsin. The bitterness of peptides was reduced in LMPC-T-FG compared with LMPC-T-F. The potential application of the E-tongue using a standard model solution with quinine was shown to follow the bitterness of peptides.

Milk proteins: Processing, gastric coagulation, amino acid availability and muscle protein synthesis

It is well-known that the postprandial muscle protein synthetic response to protein ingestion is regulated on various levels, including dietary protein digestion and amino acid (AA) absorption, splanchnic AA retention, the availability of dietary protein-derived AA in the circulation, delivery of AA to the muscle, uptake of AA by the muscle, and intramuscular signaling. AA availability after consumption of dairy products is primarily determined by the rate of gastric emptying of milk proteins, which is mainly linked to coagulation of milk proteins in the stomach. Caseins form gastric coagula, which make their gastric emptying and subsequent postprandial aminoacidemia notably slower than that of whey proteins. Only recently, the role of processing, food structure, preservation and matrix on coagulation herein has been getting attention. In this review we describe various processes, that affect gastric coagulation of caseins and therewith control gastric emptying, such as the conversion to caseinate, heat treatment in the presence of whey proteins, conversion to stirred yoghurt and enzymatic hydrolysis. Modulating product characteristics by processing can be very useful to steer the gastric behavior of protein, and the subsequent digestion and AA absorption and muscle anabolic response to maintain or increase muscle mass.

Hemp globulin forms colloidal nanocomplexes with sodium caseinate during pH-cycling

Seed from industrial hemp (Cannabis sativa L.) contains around 25% protein (mainly globulins) which is easily digested, but the low solubility of hemp globulins (HG) limits their application in many food systems. In this study, the solubility of HG was improved by blending HG with sodium caseinate (SC) and treating with a pH-cycling process. The pH-cycling involved adjusting the pH to 12 and reacting for 1 hr, followed by neutralisation to pH 7. Nanoparticles composed of HG and SC (Z-average diameter ≈ 130 nm) were formed after the pH-cycling, and the solubility of HG increased to > 80% when there was more than 1% of SC for 1% of HG. These HG|SC nanoparticles were monodisperse (PDI < 0.17) and ζ-potential was ≈ -17 mV. Hydrogen bonding is the main forces that assembles HG|SC nanoparticles because the nanoparticles dissociated by heat treatment (up to 60 °C) or urea, which is an effective hydrogen bond breaker. HG|SC nanoparticles will aggregate irreversibly above 60 °C, possibly due to thiol-disulphide exchange. The nanoparticles were heat-stable as the Z-average diameter was only 229 nm after heating (90 °C, 30 min). N-ethylmaleimide blocked free thiol groups on HG and resulted in less disulphide-linked HG aggregation after pH- cycling, which in turn lead to smaller HG|SC nanoparticles and a bimodal particle size distribution, indicating the importance of disulphide bond for the formation of monodisperse HG|SC nanoparticles. The soluble and heat-stable HG|SC nanoparticles could be used to increase the hemp protein content in beverages and emulsions.

Heat-Induced Interaction of Milk Proteins: Impact on Yoghurt Structure

Heating milk for yoghurt preparation has a significant effect on the structural properties of yoghurt. Milk heated at elevated temperature causes denaturation of whey protein, aggregation, and some case gelation. It is important to understand the mechanism involved in each state of stabilization for tailoring the final product. We review the formation of these complexes and their consequence on the physical, rheological, and microstructural properties of acid milk gels. To investigate the interactions between denatured whey protein and casein, the formation of covalent and noncovalent bonds, localization of the complexes, and their impact on ultimate gelation and final yoghurt texture are reviewed. The information regarding this fundamental mechanism will be beneficial to develop uniform quality yoghurt texture and potential interest of future research.