Pulsed electric fields as a green technology for the extraction of bioactive compounds from thinned peach by-products

Optimization of Four Different Rosemary Extraction Techniques Using Plackett-Burman Design and Comparison of Their Antioxidant Compounds

Rosemary has many medicinal and therapeutic properties and therefore it is important to study how to maximize the recovery of its bioactive compounds. In the present study, four different extraction techniques were used, namely stirring extraction (STE), pulsed electric field-assisted extraction (PEF), ultrasound probe-assisted extraction (UPAE), and ultrasound bath-assisted extraction (UBAE). First, some primary experiments were carried out in order to optimize each technique individually through the Plackett-Burman design. Then, each technique was applied under optimal conditions and the results were compared with each other. The optimal total polyphenol content (TPC) of STE is ~19 mg gallic acid equivalents per gram of dry weight (dw), while the antioxidant activity of the extract is 162 μmol ascorbic acid equivalents (AAEs) per gram of dw via FRAP and ~110 μmol AAE per gram of dw via DPPH. As for PEF, the optimal TPC is ~12 mg GAE/g dw, and the FRAP and DPPH values are ~102 and ~70 μmol AAE per gram of dw, respectively. When it comes to UPAE, the optimal TPC is ~16 mg GAE/g dw and the antioxidant capacity of the extract is ~128 μmol AAE/g dw through FRAP and ~98 μmol AAE/g dw through DPPH. UBAE optimal extract yielded ~17 mg GAE/g dw TPC, ~146 μmol AAE/g dw for FRAP, and ~143 μmol AAE/g dw for DPPH. The highest flavonoid content (~6.5 mg rutin equivalent/g dw) and DPPH (~143 μmol ascorbic acid equivalent/g dw) is obtained through UBAE. UPAE has been shown to be more efficient in recovering ascorbic acid (~20 mg/g dw). Additionally, the chlorophyll-to-carotenoid ratios of UPAE and UBAE were 2.98 and 2.96, respectively, indicating that the extracts had a generally positive impact on health. Considering the environmental impact of each extraction technique but also which antioxidant factor needs to be maximized, the most suitable extraction technique will be chosen.

Trends in extracting Agro-byproducts' phenolics using non-thermal technologies and their combinative effect: Mechanisms, potentials, drawbacks, and safety evaluation

The agro-food industries generate significant waste with adverse effects. However, these byproducts are rich in polyphenols with diverse bioactivities. Innovative non-thermal extraction (NTE) technologies (Naviglio extractor®, cold plasma (CP), high hydrostatic pressure (HHP), pulse-electric field (PEF), ultrasound-assisted extraction (UAE), etc.) and their combinative effect (integrated UAE + HPPE, integrated PEF + enzyme-assisted extraction, etc.) could improve polyphenolic extraction. Hence, this article comprehensively reviewed the mechanisms, applications, drawbacks, and safety assessment of emerging NTE technologies and their combinative effects in the last 5 years, emphasizing their efficacy in improving agro-byproduct polyphenols' extraction. According to the review, incorporating cutting-edge NTE might promote the extraction ofmore phenolic extractfrom agro-byproducts due to numerous benefits,such as increased extractability,preserved thermo-sensitive phenolics, and low energy consumption. The next five years should investigate combined novel NTE technologies as they increase extractability. Besides, more research must be done on extracting free and bound phenolics, phenolic acids, flavonoids, and lignans from agro by-products. Finally, the safety of the extraction technology on the polyphenolic extract needs a lot of studies (in vivo and in vitro), and their mechanisms need to be explored.

Recovery of phenolic compounds from peach pomace using conventional solvent extraction and different emerging techniques

The study compared high-pressure, microwave, ultrasonic, and traditional extraction techniques. The following extraction conditions were implemented: microwave-assisted extraction (MAE) at 900 W power for durations of 30, 60, and 90 s; ultrasonic-assisted extraction (UAE) at 100% amplitude for periods of 5, 10, and 15 min; and high-pressure processing (HPP) at pressures of 400 and 500 MPa for durations of 1, 5, and 10 min. The highest yield in terms of total phenolic content (PC) was obtained in UAE with a value of 45.13 ± 1.09 mg gallic acid equivalent (GAE)/100 g fresh weight (FW). The highest PC content was determined using HPP-500 MPa for 10 min, resulting in 40 mg GAE/100 g, and MAE for 90 s, yielding 34.40 mg GAE/100 g FW. The highest value of antioxidant activity (AA) was obtained by UAE in 51.9% ± 0.71%. The PCs were identified through the utilization of Fourier transform infrared (FTIR) spectroscopy and high-performance liquid chromatography (HPLC). Utilizing multivariate analysis, the construction of chemometric models were executed to predict AA or total PC of the extracts, leveraging the information from IR spectra. The FTIR spectrum revealed bands associated with apigenin, and the application of HPP resulted in concentrations of 5.41 ± 0.25 mg/100 g FW for apigenin and 1.30 ± 0.15 mg/100 g FW for protocatechuic acid. Furthermore, HPLC analysis detected the presence of protocatechuic acid, caffeic acid, p-coumaric acid, and apigenin in both green extraction methods and the classical method. Apigenin emerged as the predominant phenolic compound in peach extracts. The highest concentrations of apigenin, p-coumaric acid, and protocatechuic acid were observed under HPP treatment, measuring 5.41 ± 0.25, 0.21 ± 0.04, and 1.30 ± 0.15 mg/kg FW, respectively.

Pulsed electric field technology as a promising pre-treatment for enhancing orange agro-industrial waste biorefinery

In the processing of orange juice, 50-70% of the fresh fruit weight is converted into organic waste. Orange processing waste (OPW) primarily consists of peels, seeds, and pulp. Improper disposal of this residue can lead to greenhouse gas emissions, environmental pollution, and the wastage of natural resources. To address this ecological issues, recent research has focused on developing innovative process designs to maximize the valorization of OPW through biorefinery strategies. However, the current challenge in implementing these methods for industrial waste management is their significant energy consumption. In response to these challenges, recent studies have explored the potential of employing pulsed electric field (PEF) technology as a pre-treatment to improve energy efficiency in biorefinery processes. This non-thermal and emerging technology can enhance the mass transfer of intracellular components via electroporation of cell walls, thereby resulting in shorter processing times, lower energy inputs, greater retention of thermosensitive components, and higher extraction yields. In this regard, this review offers a comprehensive discussion on the innovative biorefinery strategies to the valorization of OPW, with a specific focus on recent studies assessing the technical feasibility of methodologies for the extraction of phytochemical compounds, dehydration processes, and bioconversion methods. Recent studies that discussed the potential of PEF technology to reduce energy demand by increasing the mass transfer of biological tissues were emphasized.

Scanning Electron Microscopy and Triple TOF-LC-MS-MS Analysis of Polyphenols from PEF-Treated Edible Mushrooms (L. edodes, A. brunnescens, and P. ostreatus)

Pulsed electric fields (PEF) technology has been used as a sustainable method for extracting antioxidant bioactive compounds from different food matrices. In the present study, the optimal conditions of PEF extraction for mushrooms (2.5 kV/cm, 50 kJ/kg, 6 h) were applied to Lentinula edodes, Agaricus brunnescens, and Pleurotus ostreatus to evaluate the total antioxidant capacity of the extracts, followed by the Triple TOF-LC-MS-MS analysis of the phenolic profile compared to A. bisporus by high-performance liquid chromatography coupled to mass spectrophotometry. In addition, the microporation effect of the technology on the mushroom surface was evaluated using scanning electron microscopy. A comparison was made with a maceration extraction (aqueous stirring for 6 h). The results showed that PEF-assisted extraction enhanced the recovery of antioxidant compounds such as 3,5-dicaffeoylquinic and cinnamic acid with contents up to 236.85 µg/100 g dry weight and 2043.26 µg/100 g dry weight from A. bisporus, respectively. However, mixed results were obtained for certain phenolic compounds, including vanillic acid from L. edodes, ellagic acid from P. ostreatus, and thymol from all mushrooms. These results indicate that the application of PEF technology is effective for the extraction of antioxidant compounds in fungal matrices by creating micropores in cell membranes that allow great recovery in matrices with high content of bioactive compounds.

Flavor Characterization of Native Xinjiang Flat Peaches Based on Constructing Aroma Fingerprinting and Stoichiometry Analysis

The flat peach is a high economic value table fruit possessing excellent quality and a unique aroma. This article investigated the quality characteristics and aroma fingerprinting of flat peaches (Qingpan, QP; Ruipan 2, R2; Ruipan 4, R4; Wanpan, WP) from Xinjiang in terms of taste, antioxidant capacity, and volatile aroma compounds using high-performance liquid chromatography (HPLC) and HS-SPME-GC-MS. The results showed that the flat peaches had a good taste and high antioxidant capacity, mainly due to the high sugar-low acid property and high levels of phenolic compounds. This study found that sucrose (63.86~73.86%) was the main sugar, and malic acid (5.93~14.96%) and quinic acid (5.25~15.01%) were the main organic acids. Furthermore, chlorogenic acid (main phenolic compound), epicatechin, rutin, catechin, proanthocyanidin B1, and neochlorogenic acid were positively related to the antioxidant activity of flat peaches. All flat peaches had similar aroma characteristics and were rich in aromatic content. Aldehydes (especially benzaldehyde and 2-hexenal) and esters were the main volatile compounds. The aroma fingerprinting of flat peaches consisted of hexanal, 2-hexenal, nonanal, decanal, benzaldehyde, 2,4-decadienal, dihydro-β-ionone, 6-pentylpyran-2-one, 2-hexenyl acetate, ethyl caprylate, γ-decalactone, and theaspirane, with a "peach-like", "fruit", and "coconut-like" aroma. Among them, 2,4-decadienal, 2-hexenyl acetate, and theaspirane were the characteristic aroma compounds of flat peaches. The results provide a theoretical basis for the industrial application of the special aroma of flat peaches.

Valorization of Fruit Waste for Bioactive Compounds and Their Applications in the Food Industry

The fruit production and processing sectors produce tremendous amounts of by-products and waste that cause significant economic losses and an undesirable impact on the environment. The effective utilization of these fruit wastes can help to reduce the carbon footprint and greenhouse gas emissions, thereby achieving sustainable development goals. These by-products contain a variety of bioactive compounds, such as dietary fiber, flavonoids, phenolic compounds, antioxidants, polysaccharides, and several other health-promoting nutrients and phytochemicals. These bioactive compounds can be extracted and used as value-added products in different industrial applications. The bioactive components extracted can be used in developing nutraceutical products, functional foods, or food additives. This review provides a comprehensive review of the recent developments in fruit waste valorization techniques and their application in food industries. The various extraction techniques, including conventional and emerging methods, have been discussed. The antioxidant and antimicrobial activities of the active compounds extracted and isolated from fruit waste have been described. The most important food industrial application of bioactive compounds extracted from fruit waste (FW) has been provided. Finally, challenges, future direction, and concluding remarks on the topic are summarized.

Pulsed electric field assisted extraction of natural food pigments and colorings from plant matrices

•

Pulsed electric field (PEF) technology enables the extraction of food pigments at lower temperatures.

•

PEF process intensification may reduce the extraction yield depending on the plant matrix.

•

Coupling PEF with other emerging technologies is a smart strategy to extract natural pigments.

•

The application of PEF technology in natural food pigment extraction still requires further studies.

Coloring compounds are widely applied to manufacturing foods and beverages. The worldwide food market is replacing artificial colorants with natural alternatives, given the increased consumer demand for natural products. However, these substitutes are still an issue due to their high production cost and low chemical and physical stability. Furthermore, natural pigments are highly sensitive to processes applied in conventional extraction techniques, such as thermal, mechanical, and chemical stresses. In this regard, pulsed electric field (PEF) technology has emerged as a promising non-thermal alternative for recovering and producing natural colorings from food matrices. Its action mechanism on cell structures through the electroporation effect is a smart alternative to overcoming the challenging issues associated with producing natural colorants. In this scenario, this review provides an overview of the PEF assisted extraction of natural pigments and colorants, such as anthocyanins (red-blue-purple), betalains (red), carotenoids (yellow-orange-red), and chlorophylls (green) from plant sources. Moreover, the potential and limitations of this emerging technology to integrate the extraction process of natural colorants were discussed.

Physicochemical Characteristics, Antioxidant Activities, and Aroma Compound Analysis of Seven Peach Cultivars (Prunus persica L. Batsch) in Shihezi, Xinjiang

Peaches are tasty and juicy, with a unique flavor. The flavors of peaches always vary with cultivars. To investigate the physicochemical and aroma characteristics of peaches, the sugars, organic acids, total flavonoids, phenols, antioxidant activities, and aroma compounds of seven peach cultivars in Xinjiang were determined using high-performance liquid chromatography (HPLC) and headspace solid-phase microextraction coupled with gas chromatography–mass spectrometry (HS-SPME–GC–MS). The results showed that sucrose (59.83 to 87.34%), malic acid (32.41 to 59.14%), and chlorogenic acid (10.43 to 45.50%) were the dominant sugar, organic acid, and phenolic compound in peaches, respectively. The antioxidant activity varied between 147.81 and 394.55 μmol TEs/100 g. The analysis of the aroma structure of peaches found that the volatile composition of peaches was relatively consistent, though the concentration of total aroma and certain separate compounds were different between cultivars. Meanwhile, the aroma fingerprint of the peaches consisted of hexyl acetate, cis-3-hexenyl acetate, γ-decalactone, n-hexanal, 2-hexenal, nonanal, decanal benzaldehyde and 6-pentylpyran-2-one, providing a clear green, sweet, floral, and fruity odor. These results provide complete information on the physicochemical properties, functional ingredients and aroma of the peaches.

A Systematic Review on Waste as Sustainable Feedstock for Bioactive Molecules—Extraction as Isolation Technology

In today’s linear economy, waste streams, environmental pollution, and social–economic differences are increasing with population growth. The need to develop towards a circular economy is obvious, especially since waste streams are composed of valuable compounds. Waste is a heterogeneous and complex matrix, the selective isolation of, for example, polyphenolic compounds, is challenging due to its energy efficiency and at least partially its selectivity. Extraction is handled as an emerging technology in biorefinery approaches. Conventional solid liquid extraction with organic solvents is hazardous and environmentally unfriendly. New extraction methods and green solvents open a wider scope of applications. This research focuses on the question of whether these methods and solvents are suitable to replace their organic counterparts and on the definition of parameters to optimize the processes. This review deals with the process development of agro-food industrial waste streams for biorefineries. It gives a short overview of the classification of waste streams and focuses on the extraction methods and important process parameters for the isolation of secondary metabolites.

Microwave hydrodiffusion and gravity model with a unique hydration strategy for exhaustive extraction of anthocyanins from strawberries and raspberries

This study aimed to verify if microwave hydrodiffusion and gravity (MHG) could efficiently extract anthocyanins from strawberries and raspberries with low environmental impact and costs. Our findings revealed that it was possible to extract 69 and 64% anthocyanins from the strawberries and raspberries in a single extraction step, respectively. When the co-product (product remaining after extracting in natura fruits) was hydrated with green solvents and subjected to re-extraction, it was possible to exhaustively extract the anthocyanins from both fruits. Using the Green Analytical Procedure Index (GAPI), the MHG proved to cause low environmental impact due to the solvents used, enabling the reuse of the co-product for food and pharmaceutical products application. Moreover, the MHG was economically viable, and the sample pretreated with distilled water was the most indicated re-extraction method. The MHG process proved to be exhaustive for strawberry and raspberry anthocyanins, thus demonstrating to be an excellent alternative for sustainable extraction.

Green Extraction of Carotenoids from Fruit and Vegetable Byproducts: A Review

Carotenoids are characterized by a wide range of health-promoting properties. For example, they support the immune system and wound healing process and protect against UV radiation’s harmful effects. Therefore, they are used in the food industry and cosmetics, animal feed, and pharmaceuticals. The main sources of carotenoids are the edible and non-edible parts of fruit and vegetables. Therefore, the extraction of bioactive substances from the by-products of vegetable and fruit processing can greatly reduce food waste. This article describes the latest methods for the extraction of carotenoids from fruit and vegetable byproducts, such as solvent-free extraction—which avoids the costs and risks associated with the use of petrochemical solvents, reduces the impact on the external environment, and additionally increases the purity of the extract—or green extraction using ultrasound and microwaves, which enables a significant improvement in process efficiency and reduction in extraction time. Another method is supercritical extraction with CO₂, an ideal supercritical fluid that is non-toxic, inexpensive, readily available, and easily removable from the product, with a high penetration capacity.

Bio Discarded from Waste to Resource

The modern linear agricultural production system allows the production of large quantities of food for an ever-growing population. However, it leads to large quantities of agricultural waste either being disposed of or treated for the purpose of reintroduction into the production chain with a new use. Various approaches in food waste management were explored to achieve social benefits and applications. The extraction of natural bioactive molecules (such as fibers and antioxidants) through innovative technologies represents a means of obtaining value-added products and an excellent measure to reduce the environmental impact. Cosmetic, pharmaceutical, and nutraceutical industries can use natural bioactive molecules as supplements and the food industry as feed and food additives. The bioactivities of phytochemicals contained in biowaste, their potential economic impact, and analytical procedures that allow their recovery are summarized in this study. Our results showed that although the recovery of bioactive molecules represents a sustainable means of achieving both waste reduction and resource utilization, further research is needed to optimize the valuable process for industrial-scale recovery.

Low-Frequency Ultrasound Coupled with High-Pressure Technologies: Impact of Hybridized Techniques on the Recovery of Phytochemical Compounds

The coupling of innovative technologies has emerged as a smart alternative for the process intensification of bioactive compound extraction from plant matrices. In this regard, the development of hybridized techniques based on the low-frequency and high-power ultrasound and high-pressure technologies, such as supercritical fluid extraction, pressurized liquids extraction, and gas-expanded liquids extraction, can enhance the recovery yields of phytochemicals due to their different action mechanisms. Therefore, this paper reviewed and discussed the current scenario in this field where ultrasound-related technologies are coupled with high-pressure techniques. The main findings, gaps, challenges, advances in knowledge, innovations, and future perspectives were highlighted.

A Critical Review on Pulsed Electric Field: A Novel Technology for the Extraction of Phytoconstituents

Different parts of a plant (seeds, fruits, flower, leaves, stem, and roots) contain numerous biologically active compounds called “phytoconstituents” that consist of phenolics, minerals, amino acids, and vitamins. The conventional techniques applied to extract these phytoconstituents have several drawbacks including poor performance, low yields, more solvent use, long processing time, and thermally degrading by-products. In contrast, modern and advanced extraction nonthermal technologies such as pulsed electric field (PEF) assist in easier and efficient identification, characterization, and analysis of bioactive ingredients. Other advantages of PEF include cost-efficacy, less time, and solvent consumption with improved yields. This review covers the applications of PEF to obtain bioactive components, essential oils, proteins, pectin, and other important materials from various parts of the plant. Numerous studies compiled in the current evaluation concluded PEF as the best solution to extract phytoconstituents used in the food and pharmaceutical industries. PEF-assisted extraction leads to a higher yield, utilizes less solvents and energy, and it saves a lot of time compared to traditional extraction methods. PEF extraction design should be safe and efficient enough to prevent the degradation of phytoconstituents and oils.

Application of ultrasound in combination with other technologies in food processing: A review

The use of non-thermal processing technologies has been on the surge due to ever increasing demand for highest quality convenient foods containing the natural taste & flavor and being free of chemical additives and preservatives. Among the various non-thermal processing methods, ultrasound technology has proven to be very valuable. Ultrasound processing, being used alone or in combination with other processing methods, yields significant positive results on the quality of foods, thus has been considered efficacious. Food processes performed under the action of ultrasound are believed to be affected in part by cavitation phenomenon and mass transfer enhancement. It is considered to be an emerging and promising technology and has been applied efficiently in food processing industry for several processes such as freezing, filtration, drying, separation, emulsion, sterilization, and extraction. Various researches have opined that ultrasound leads to an increase in the performance of the process and improves the quality factors of the food. The present paper will discuss the mechanical, chemical and biochemical effects produced by the propagation of high intensity ultrasonic waves through the medium. This review outlines the current knowledge about application of ultrasound in food technology including processing, preservation and extraction. In addition, the several advantages of ultrasound processing, which when combined with other different technologies (such as microwave, supercritical CO2, high pressure processing, enzymatic extraction, etc.) are being examined. These include an array of effects such as effective mixing, retention of food characteristics, faster energy and mass transfer, reduced thermal and concentration gradients, effective extraction, increased production, and efficient alternative to conventional techniques. Furthermore, the paper presents the necessary theoretical background and details of the technology, technique, and safety precautions about ultrasound.

Fruits and fruit by-products as sources of bioactive compounds. Benefits and trends of lactic acid fermentation in the development of novel fruit-based functional beverages

Current awareness about the benefits of a balanced diet supports ongoing trends in humans towards a healthier diet. This review provides an overview of fruits and fruit-by products as sources of bioactive compounds and their extraction techniques, and the use of lactic acid fermentation of fruit juices to increase their functionality. Fruit matrices emerge as a technological alternative to be fermented by autochthonous or allochthonous lactic acid bacteria (LAB such as Lactiplantibacillus plantarum, Lacticaseibacillus rhamnosus, and other Lactobacillus species), and also as probiotic vehicles. During fermentation, microbial enzymes act on several fruit phytochemicals producing new derived compounds with impact on the aroma and the functionality of the fermented drinks. Moreover, fermentation significantly reduces the sugar content improving their nutritional value and extending the shelf-life of fruit-based beverages. The generation of new probiotic beverages as alternatives to consumers with intolerance to lactose or with vegan or vegetarian diets is promising for the worldwide functional food market. An updated overview on the current knowledge of the use of fruit matrices to be fermented by LAB and the interaction between strains and the fruit phytochemical compounds to generate new functional foods as well as their future perspectives in association with the application of nanotechnology techniques are presented in this review.

Green Extraction Methods for Extraction of Polyphenolic Compounds from Blueberry Pomace

In this study, green extraction methods—high voltage electrical discharges (HVED), pulsed electric field (PEF), and ultrasound-assisted extraction (UAE)—were compared in terms of extraction yield of total and individual polyphenolic compounds, as well as the antioxidant capacity of blueberry pomace extracts. All extractions were performed with methanol- and ethanol-based solvents. The highest total polyphenols content (TPC) (10.52 mg of gallic acid equivalent (GAE) per g of dry weight (dw)) and antioxidant activity (AA) (0.83 mmol TE/g dw) were obtained by PEF-assisted extraction in the ethanol-based solvent after 100 pulses and 20 kV/cm, which corresponds to an energy input of 41.03 kJ/kg. A total of eighteen individual polyphenols were identified in all investigated blueberry pomace extracts by high-performance liquid chromatography with the diode-array detector (HPLC-DAD) and liquid chromatography electrospray ionization tandem mass spectrometric (LC-(HESI)-MS/MS). The highest anthocyanin (1757.32 µg/g of dw) and flavanol (297.86 µg/g of dw) yields were obtained in the methanol-based solvent, while the highest phenolic acid (625.47 µg/g of dw) and flavonol (157.54 µg/g of dw) yields were obtained in the ethanol-based solvent by PEF-assisted extraction at the energy input of 41.03 kJ/kg. These results indicated that PEF is a promising green extraction method which can improve the blueberry pomace’s polyphenol extraction yield.

Environmentally Friendly Methods for Flavonoid Extraction from Plant Material: Impact of Their Operating Conditions on Yield and Antioxidant Properties

The flavonoids are compounds synthesized by plants, and they have properties such as antioxidant, anticancer, anti-inflammatory, and antibacterial, among others. One of the most important bioactive properties of flavonoids is their antioxidant effect. Synthetic antioxidants have side toxic effects whilst natural antioxidants, such as flavonoids from natural sources, have relatively low toxicity. Therefore, it is important to incorporate flavonoids derived from natural sources in several products such as foods, cosmetics, and drugs. For this reason, there is currently a need to extract flavonoids from plant resources. In this review are described the most important parameters involved in the extraction of flavonoids by unconventional methods such as ultrasound, pressurized liquid extraction, mechanochemical, high hydrostatic pressure, supercritical fluid, negative pressure cavitation, intensification of vaporization by decompression to the vacuum, microwave, infrared, pulsed electric field, high-voltage electrical discharges, and enzyme-assisted extraction. There are no unified operation conditions to achieve high yields and purity. Notwithstanding, progress has been achieved in the development of more advanced and environmentally friendly methods of extraction. Although in literature are found important advances, a complete understanding of the extraction process in each of the unconventional techniques is needed to determine the thermodynamic and kinetic mechanisms that govern each of the techniques.

Optimizing the antioxidant biocompound recovery from peach waste extraction assisted by ultrasounds or microwaves

The possibility to valorize peach juice waste, either frozen or air-dried, through microwave (MAE) and ultrasound assisted extraction (UAE) was evaluated. MAE power, UAE amplitude and time were optimized using a 2²-factorial design. For frozen waste, optimal MAE (540 W, 50 s) and UAE (23%, 120 s) processes gave extracts presenting analogous content (on 100 g dry matter) of polyphenols (309-317 mg GAE), flavonoids (94-120 mg QE), anthocyanins (8-9 mg CGE), and similar antioxidant activity (2.1-2.2 mg TE). Extracts from dried waste resulted higher in polyphenols (630-670 mg GAE) but lower in flavonoids (75-90 mg QE), anthocyanins and vitamin C (not detectable). Although developing an energy density 2-fold higher than that of UAE, MAE more efficaciously extracted vitamin C (108 mg/100 g dm) and required half extraction time (50 s). MAE would also be less impactful than UAE in terms of greenhouse gas emission and energy requirements on industrial scale. The industrial valorization of peach waste through the application of microwave or ultrasound assisted extraction requires quantitative data, able to encourage company interest and investment. This study not only identifies optimal MAE and UAE parameters to assist the extraction of peach waste bioactive compounds but also provides a preliminary estimation of the potential economic and environmental impact on an industrial scale of these technologies.