Sanitizing food contact surfaces by the use of essential oils

Chemical Composition, Biological Activity, and Application of Rosa damascena Essential Oil as an Antimicrobial Agent in Minimally Processed Eggplant Inoculated with Salmonella enterica

Rosa damascena is mostly grown for its usage in the food, medical, and perfume industries, while it is also used as an attractive plant in parks, gardens, and homes. The use of R. damascena essential oil may yield new results in relation to the antimicrobial activity of essential oils and their use mainly in extending the shelf life of foods. This study investigates the chemical composition and antimicrobial properties of Rosa damascena essential oil (RDEO) using gas chromatography-mass spectrometry (GC-MS) and various bioassays to explore its potential applications in food preservation and microorganism growth control. The GC-MS analysis revealed that RDEO is predominantly composed of phenylethyl alcohol (70%), which is known for its antimicrobial and aromatic properties. Additionally, other significant constituents were identified, including nerol, citronellol, and geraniol, which may contribute to the EOs overall bioactivity. The antimicrobial activity was assessed through the minimal inhibition concentration against five Candida yeast strains, four Gram-positive, and four Gram-negative bacteria, including biofilm-forming Salmonella enterica. Determination of minimum inhibitory concentrations (MIC) revealed the strongest effects of RDEO's on Gram-negative species, with MIC50 values as low as 0.250 mg/mL for S. enterica. Moreover, an in situ assessment utilizing fruit and vegetable models demonstrated that the vapor phase of RDEO significantly suppressed microbial growth, with the most substantial reductions observed on kiwi and banana models. As a result of our study, the antimicrobial effect of RDEO on the microbiota of sous vide processed eggplant was detected, as well as an inhibitory effect on S. enterica during storage. The insecticidal activity against Megabruchidius dorsalis Fahreus, 1839, was also studied in this work and the best insecticidal activity was found at the highest concentrations. These results suggest that RDEO has the potential to serve as a natural antimicrobial agent in food preservation and safety applications, providing an alternative to synthetic preservatives.

Anise essential oil immobilized in chitosan microparticles: a novel bactericidal material for food protection

Foodborne infections in humans are one of the major concerns of the food industries, especially for minimally processed foods (MPF). Thereby, the packaging industry applies free chlorine in the sanitization process, ensuring the elimination of any fecal coliforms or pathogenic microorganisms. However, free chlorine's propensity to react with organic matter, forming toxic compounds such as trihalomethanes and haloacetic acid. Therefore, the present work aimed to synthesize a novel organic biomaterial as an alternative to free chlorine. Chitosan microparticles were produced, with Pimpinella anisum (anise) essential oil immobilized in the biopolymer matrix (MPsQTO). The characterization of this biomaterial was done through GC-MS/MS, FT-IR, and SEM. Antimicrobial assays proved that the MPsQTO presented antibacterial activity for Escherichia coli, Salmonella typhi, Pseudomonas aeruginosa, and Bacillus subtilis at 300 µL mL-1 of concentration. The fluorescence microscope also showed the MPsQTO targets the cytoplasmatic membrane, which is responsible for cell death in the first minutes of contact. Studies with the mutant B. subtilis (amy::pspac-ftsZ-gfpmut1) and the Saccharomyces cerevisiae D7 also proved that the biomaterial did not affect the genetic material and did not have any mutagenic/carcinogenic effect on the cells. The sanitization assays with pumpkin MPF proved that the MPsQTO is more effective than free chlorine, increasing the shelf-life of the MPF. Consequently, the novel biomaterial proposed in this work is a promising alternative to traditional chemical sanitizers.

Disinfectant efficacy of glabridin against dried and biofilm cells of Listeria monocytogenes and the impact of residual organic matter

Glabridin is an antimicrobial compound which can be extracted from plants, such as liquorice (Glycyrrhiza glabra) roots. Although its activity against foodborne pathogens and spoilage microorganisms has already been reported, the investigation of potential applications as a surface disinfectant is still largely unexplored. Hence, this study evaluated the disinfectant efficacy of glabridin against Listeria monocytogenes. The activity of glabridin was first tested in vitro in a nutrient-rich medium against eight strains of L. monocytogenes, including food isolates and the model strain EGDe. The tested strains showed similar susceptibility with minimal inhibitory and bactericidal concentrations of 12.5 µg/mL and 25 µg/mL, respectively. Subsequently, L. monocytogenes L6, FBR17 and EGDe were selected to assess the efficacy of glabridin against dried cells (according to the European standard EN 13697:2015 + A1:2019) and biofilm cells on stainless steel surfaces. Moreover, the impact of food residual organic matter was investigated using skim milk, cantaloupe and smoked salmon solution as soiling components. Our results showed that applying 200 µg/mL of glabridin resulted in a substantial reduction (>3 log10) of dried and biofilm cells of L. monocytogenes in standard conditions (i.e. low level of residual organic matter). Cantaloupe soiling components slightly reduced the activity of glabridin, while the efficacy of glabridin when tested with salmon and skim milk residuals was substantially affected. Comparative analysis using standardized protein contents provided evidence that the type of food matrices and type of proteins may impact the activity of glabridin as a disinfectant. Overall, this study showed low strain variability for the activity of glabridin against L. monocytogenes and shed light on the possible application of this natural antimicrobial compound as a surface disinfectant.

Biofilm formation in food industries: Challenges and control strategies for food safety

Various pathogens have the ability to grow on food matrices and instruments. This grow may reach to form biofilms. Bacterial biofilms are community of microorganisms embedded in extracellular polymeric substances (EPSs) containing lipids, DNA, proteins, and polysaccharides. These EPSs provide a tolerance and favorable living condition for microorganisms. Biofilm formations could not only contribute a risk for food safety but also have negative impacts on healthcare sector. Once biofilms form, they reveal resistances to traditional detergents and disinfectants, leading to cross-contamination. Inhibition of biofilms formation and abolition of mature biofilms is the main target for controlling of biofilm hazards in the food industry. Some novel eco-friendly technologies such as ultrasound, ultraviolet, cold plasma, magnetic nanoparticles, different chemicals additives as vitamins, D-amino acids, enzymes, antimicrobial peptides, and many other inhibitors provide a significant value on biofilm inhibition. These anti-biofilm agents represent promising tools for food industries and researchers to interfere with different phases of biofilms including adherence, quorum sensing molecules, and cell-to-cell communication. This perspective review highlights the biofilm formation mechanisms, issues associated with biofilms, environmental factors influencing bacterial biofilm development, and recent strategies employed to control biofilm-forming bacteria in the food industry. Further studies are still needed to explore the effects of biofilm regulation in food industries and exploit more regulation strategies for improving the quality and decreasing economic losses.

Eco-Friendly Sanitization of Indoor Environments: Effectiveness of Thyme Essential Oil in Controlling Bioaerosol Levels and Disinfecting Surfaces

Bioaerosols and pathogens in indoor workplaces and residential environments are the primary culprits of several infections. Techniques for sanitizing air and surfaces typically involve the use of UV rays or chemical sanitizers, which may release chemical residues harmful to human health. Essential oils, natural substances derived from plants, which exhibit broad antimicrobial properties, could be a viable alternative for air and surface sanitation. The objective of this study has been to investigate the efficacy of thyme essential oil (TEO) in environmental sanitation processes. In Vitro assays through agar well diffusion, disk volatilization and tube dilution methods revealed significant antimicrobial activity of TEO 100% against foodborne and environmental isolates, with both bacteriostatic/fungistatic and bactericidal/fungicidal effects. Therefore, aqueous solutions of TEO 2.5% and 5% were formulated for air sanitation through nebulization and surface disinfection via direct contact. Bioaerosol samples and surface swabs were analyzed before and after sanitation, demonstrating the efficacy of aqueous solutions of TEO in reducing mesophilic and psychrophilic bacteria and environmental fungi levels in both air and on surfaces. The obtained results prove the antimicrobial potential of aqueous solutions of TEO in improving indoor air quality and surface cleanliness, suggesting thyme essential oil as an effective and safe natural sanitizer with minimal environmental impact compared to dangerous chemical disinfectants.

Antibacterial Activity of Oregano (Origanum vulgare L.) Essential Oil Vapors against Microbial Contaminants of Food-Contact Surfaces

The antimicrobial effect of eight essential oils' vapors against pathogens and spoilage bacteria was assayed. Oreganum vulgare L. essential oil (OVO) showed a broad antibacterial effect, with Minimum Inhibitory Concentration (MIC) values ranging from 94 to 754 µg cm-3 air, depending on the bacterial species. Then, gaseous OVO was used for the treatment of stainless steel, polypropylene, and glass surfaces contaminated with four bacterial pathogens at 6-7 log cfu coupon-1. No viable cells were found after OVO treatment on all food-contact surfaces contaminated with all pathogens, with the exception of Sta. aureus DSM 799 on the glass surface. The antimicrobial activity of OVO after the addition of beef extract as a soiling agent reduced the Sta. aureus DSM 799 viable cell count by more than 5 log cfu coupon-1 on polypropylene and glass, while no viable cells were found in the case of stainless steel. HS-GC-MS analysis of the headspace of the boxes used for the antibacterial assay revealed 14 different volatile compounds with α-Pinene (62-63%), and p-Cymene (21%) as the main terpenes. In conclusion, gaseous OVO could be used for the microbial decontamination of food-contact surfaces, although its efficacy needs to be evaluated since it depends on several parameters such as target microorganisms, food-contact material, temperature, time of contact, and relative humidity.

Microalgae-Based Disinfectant Formulation for Aseptic Processing of Ethiopian Ingredient-Sourced Functional Bread and Its Molecular Docking Analysis to Reduce Hypernatremia

The global prevalence of food-borne infections has become a major concern. Food-borne pathogens like Campylobacter jejuni, Salmonella enterica, and Clostridium botulinum cause food poisoning and even mortality, necessitating the maintenance of aseptic conditions during food processing. The sterilization of food processing facilities often requires chemical and heat treatment. The formulation of many chemical-based disinfectants includes chemicals generating toxic and carcinogenic by-products. The microalgae like Chlorella spp. reportedly exhibit antimicrobial activity and therefore, can be used for formulating safer and eco-friendly natural sanitizers. This study aims to aseptically prepare functional bread using Ethiopian ingredients, highlighting the application of microalgae-based disinfectant formulation and various disinfection techniques. The functional bread was designed to be potentially effective in reducing hypernatremia condition which is indicative of high levels of sodium in serum that can cause an array of symptoms including deaths in serious cases. The physico-chemical and sensory properties of the designed functional bread were analyzed. The interaction of phytochemicals in the ingredients with the target receptor (Vasopressin V2 receptor) and their drug-likeness were determined using molecular docking and Lipinski's rule of five analyses. The results suggest that the designed functional bread incorporating Ethiopian ingredients may serve as an effective dietary strategy to prevent hypernatremia. Aseptic processing of the bread ensures longer shelf life and prevention of spoilage by food pathogens.

Essential oils and their active components applied as: free, encapsulated and in hurdle technology to fight microbial contaminations. A review

Microbial contaminations are responsible for many chronic, healthcare, persistent microbial infections and illnesses in the food sector, therefore their control is an important public health challenge. Over the past few years, essential oils (EOs) have emerged as interesting alternatives to synthetic antimicrobials as they are biodegradable, extracted from natural sources and potent antimicrobials. Through their multiple mechanisms of actions and target sites, no microbial resistance has been developed against them till present. Although extensive documentation has been reported on the antimicrobial activity of EOs, comparisons between the use of whole EOs or their active components alone for an antimicrobial treatment are less abundant. It is also essential to have a good knowledge about EOs to be used as alternatives to the conventional antimicrobial products such as chemical disinfectants. Moreover, it is important to focus not only on planktonic vegetative microorganisms, but to study also the effect on more resistant forms like spores and biofilms. The present article reviews the current knowledge on the mechanisms of antimicrobial activities of EOs and their active components on microorganisms in different forms. Additionally, in this review, the ultimate advantages of encapsulating EOs or combining them with other hurdles for enhanced antimicrobial treatments are discussed.

Biologically Active Preparations from the Leaves of Wild Plant Species of the Genus Rubus

The plants of the genus Rubus (R.) are applied as antiseptic agents in the treatment of skin diseases. Despite the great interest in plants of this genus, there are few reports on the antioxidant and biological activities of preparations obtained from the leaves of these plants. Therefore, we decided to evaluate the antioxidant activity of preparations from leaves of wild plant species of the genus Rubus using the frequently applied DPPH, ABTS, and FRAP methods, as well as to determine the total polyphenol content using the Folin−Ciocalteau method and perform qualitative evaluation by gas chromatography−mass spectrometry (GC-MS). The bactericidal and fungicidal activities of the obtained preparations were evaluated by applying laboratory tests: using the disc and the well methods based on the standards EN 13697:2019, EN 13697:2015, and EN 1500:2013. Microbiological tests of the plant preparations against bacteria, fungi, and yeasts isolated from the environment and against reference strains were performed. Moreover, antimicrobial testing of antibiotics against the tested strains was performed for comparison. The n-octanol/water partition coefficient of the obtained preparations was determined by the shake-flask method to determine their lipophilicity. According to the results, a high content of polyphenols and other antioxidant and biologically active compounds can be thought of as the parameter responsible for the effective activity of plant preparations obtained from wild plant species of the genus Rubus. The methods for determining bactericidal and fungicidal activity clearly demonstrates that preparations with reduced ethanol content exhibit bactericidal and fungicidal activity on surfaces. Testing of hand disinfection by means of rubbing with the preparations confirmed their antimicrobial activity against Escherichia coli K12 NCTC 10538. The obtained results show that the tested preparations exhibit on average two times lower activity against the reference bacterial strains than comparable antibiotics. The preparations obtained from the leaves of R. idaeus L. and R. fruticosus L. could complement classical antibiotics. While environmental bacteria showed a similar response to the preparations and antibiotics, their sensitivity was about one-third less than that of the reference strains. Our studies have shown that the obtained preparations are highly hydrophilic (logP < 0). Thus, these preparations can only be used in lipid bilayers in the aqueous core of liposomes, not in the lipid envelope.

Green synthesis of walnut shell hydrochar, its antimicrobial activity and mechanism on some pathogens as a natural sanitizer

Hydrochar of waste walnut shells (WSH) was synthesized in the eco-friendly subcritical water medium (SWM) and its potential to fight against Klebsiella pneumoniae (K. pneumoniae), Staphylococcus aureus (S. aureus), Candida albicans (C. albicans) and Candida parapsilosis (C. parapsilosis) was investigated. Minimum Inhibitory Concentration (MIC) values of the WSH were 3.01 g/mL, 2.06 g/mL, 1.95 g/mL, and 3.12 g/mL for K. pneumoniae, S. aureus, C. albicans and C. parapsilosis, respectively. Survival of the pathogens was investigated by 3 min surface disinfection test exposure to WSH. While the highest inhibition was seen for C. parapsilosis (96.67%) on paper surface with 0.3 g/mL of bovine serum albumin (BSA), the lowest inhibition was determined for C. albicans (6.44%) on the plastic glass surface with 3 g/mL of BSA. An increase in protein, DNA, and potassium ion (K⁺) leakage was observed after microorganisms were incubated with WSH. This study provided an experimental basis for the practical application of WSH as a natural sanitizer agent.

Advances in emerging technologies for the decontamination of the food contact surfaces

Foodborne pathogens could be transferred to food from food contact surfaces contaminated by poor hygiene or biofilm formation. The food processing industry has various conditions favouring microbes' adherence, such as moisture, nutrients, and the microbial inoculums obtained from the raw material. The function of the ideal antimicrobial surface is preventing initial attachment of the microbes, killing the microbes or/and removing the dead bacteria. This review article provides detail about the challenges food industries are facing with respect to food contact materials. It also summarises the merits and demerits of several sanitizing methods developed for industrial use. Furthermore, it reviews the new and emerging techniques that enhance the efficiency of reducing microbial contamination. Techniques such as surface functionalisation, high-intensity ultrasound, cold plasma technologies etc. which have high potential to be used for the decontamination of food contact surfaces are discussed. The emerging designs of antibacterial surfaces provide the opportunity to reduce or eradicate the adhesion of microorganisms. The most important purpose of these surfaces is to prevent the attachment of bacteria and to kill the bacteria that come in contact. These emerging technologies have a high potential for developing safe and inert food contact materials for the food industry.

Removal of Salmonella Typhimurium Biofilm from Food Contact Surfaces Using Quercus infectoria Gall Extract in Combination with a Surfactant

Quercus infectoria (nutgall) has been reported to possess antimicrobial activities against a wide range of pathogens. Nevertheless, the biofilm removal effect of nutgall extract has not been widely investigated. In this study, we therefore evaluated the effect of nutgall extract in combination with cetrimonium bromide (CTAB) against preformed biofilm of Salmonella Typhimurium on polypropylene (PP) and stainless steel (SS) coupons in comparison with other sanitizers. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of nutgall extract and surfactants (CTAB and sodium dodecyl sulfate; SDS) were assessed. CTAB showed a more efficient antimicrobial activity than SDS and was selected to use in combination with nutgall extract for removing biofilm. To determine the biofilm removal efficacy, the PP and SS coupons were individually submerged in 2x MBC of nutgall extract (256 mg/ml) + 2x MBC of CTAB (2.5 mg/ml), nutgall extract alone (256 mg/ml), CTAB alone (2.5 mg/ml), distilled water, and 100 ppm sodium hypochlorite for 5, 15, and 30 min. The remaining sessile cells in biofilm were determined. Overall, the greatest biofilm removal efficacy was observed with nutgall extract + CTAB; the biofilm removal efficacy of sanitizers tended to increase with the exposure time. The SEM analysis demonstrated that S. Typhimurium biofilm on PP and SS coupons after exposure to nutgall extract + CTAB for 30 min displayed morphological alterations with wrinkles. This study suggests nutgall extract + CTAB may be an alternative to commonly used sanitizers to remove biofilm from food contact surfaces in the food industry and household.

Potential of essential oil combinations for surface and air disinfection

In this study, it was aimed to develop a novel disinfectant from various essential oils containing active components with antimicrobial activity. The mixture of oregano, cinnamon and clove oils (1 : 1 : 1) with 10% oil concentration (SOM) was used as potential disinfectant on various areas and showed the highest antimicrobial activity among oil combinations tested. SOM reduced the numbers of total mesophilic aerobic bacteria (TMAB; 2·27 log CFU per 25 cm² ) and Escherichia coli (4·60 log CFU per 25 cm² ) under the detection limits. Application of SOM (1, 2, 3, 4 and 6%) into incubators reduced TMAB and mould-yeast counts of incubator air by 82·9 and 100% respectively. SOM application (3%) into ambient air also reduced its TMAB and mould-yeast counts by 92 and 84·6% respectively. While ethanol is commonly used for the disinfection of environments, equipment and surfaces, SOM is an important alternative that may also be used for the disinfection of various surfaces as well as air.

Self-assembled lipids for food applications: A review

Lipids play an important role in human nutrition. Several foodstuffs can be manufactured from the simple, compound and derived lipids. In particular, the use of self-assembled lipids (SLs, e.g. self-assembled L-α-lecithin) has brought great attention for the development of tailored, tuned and targeted colloidal structures loading degradation-sensitive substances with valuable antimicrobial, antioxidant and nutraceutical properties for food applications. For example, polyunsaturated fatty acids (PUFAs) and essential oils can be protected from degradation, thus improving their bioavailability in general terms in consumers. From a nanotechnological point of view, SLs allow the development of advanced and multifaceted architectures, in which each molecule of them are used as building blocks to obtain designed and ordered structures. It is important to note before beginning this review, that simple and compound lipids are the main SLs, while essential fatty acids and derived lipids in general have been considered by many research groups as the bulk loaded substances within several structures from self-assembled carbohydrates, proteins and lipids. However, this review paper is addressed on the analysis of the lipid-lipid self-assembly. Lipids can be self-assembled into various structures (micelles, vesicular systems, lyotropic liquid crystals, oleogels and films) to be used in different food applications: coatings, controlled and sustained release materials, emulsions, functional foods, etc. SLs can be obtained via non-covalent chemical interactions, primarily by hydrogen, hydrophilic and ionic bonding, which are influenced by the conditions of ionic strength, pH, temperature, among others. This manuscript aims to give an analysis of the specific state-of-the-art of SLs for food applications, based primarily on the literature reported in the past five years.

The effect of essential oils and their combinations on bacteria from the surface of fresh vegetables

During the study, we determined the antimicrobial activity of different selected essential oils (thyme, lemongrass, juniper, oregano, sage, fennel, rosemary, mint, rosehips, dill) on some pathogenic and spoilage bacteria isolated from the surface of various fresh vegetables. At the same time, in the case of some volatile oil combinations we followed the phenomena of synergism and antagonism. The identification of the isolated bacterial strains was made using 16S rDNA gene sequence analysis. The most resistant isolates appeared to be Curtobacterium herbarum, Achromobacter xylosoxidans, and Enterobacter ludwigii, while Pseudomonas hibiscicola was the most sensitive. Of the chosen plant essential oils, the most pronounced antimicrobial effect was detected in the case of oregano. The essential oils of thyme and mint also showed elevated antimicrobial activity. A synergistic effect was observed in case of five combinations of essential oil. Based on the results, we find that some individual essential oils and mixture compositions (due to synergic effect) could be good candidates for the preservation of fresh vegetables. These preliminary findings suggest that essential oils from locally grown spices could contribute to decreasing the health risk and also to the suppression of emergence of antibiotic resistance.

Combining natural antimicrobials and nanotechnology for disinfecting food surfaces and control microbial biofilm formation

The elimination of microbial surface contaminants is one of the most important steps in Good Manufacturing Practices in order to maintain food safety. This is usually achieved by detergents and chemical sanitizers, although an increased demand exists for the use of natural products for disinfection purposes. Several natural substances present antibacterial activity against the main foodborne pathogens, demonstrating great potential for use in the food industry. Some difficulties such as high volatility, residual taste and/or degradation by exposure to harsh processing conditions have been reported. Nanoparticle encapsulation appears as a strategy to protect bioactive compounds, maintaining their antimicrobial activity and providing controlled release as well. This article presents the potential of natural antimicrobials and their combination with nanotechnological strategies as an alternative for food surface disinfection and prevent microbial biofilm formation.

Carvacrol encapsulation into nanostructures: Characterization and antimicrobial activity against foodborne pathogens adhered to stainless steel

Carvacrol is a natural antimicrobial capable of inhibiting several microorganisms. The encapsulation of this compound may increase its stability, water solubility and provide controlled release. In this study, carvacrol encapsulated into nanoliposomes (NLC) and polymeric Eudragit® nanocapsules (NCC) was tested against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Salmonella spp. adhered to stainless steel. NLC showed an average diameter of 270.8 nm, zeta potential of +8.64 mV, and encapsulation efficiency of 98%. Minimum Bactericidal Concentration (MBC) of NLC was 3.53 mg/mL against Salmonella and 5.30 mg/mL against the other bacteria. NCC presented an average diameter of 159.3 nm, zeta potential of +44.8 mV, and encapsulation efficiency of 97%. MBC of NCC was 4.42 mg/mL against E. coli and 3.31 mg/mL against the other bacteria. After 2 h incubation with NCC at carvacrol concentration equivalent to ½ MBC, viable counts of Salmonella and E. coli were below the detection limit (1.69 CFU/mL). The population of L. monocytogenes and S. aureus was reduced by 2 log CFU/mL in 6 h. Afterwards, pools of each bacterium were separately adhered to stainless steel coupons (initial population 6.5 CFU/cm²). Salmonella and E. coli were inhibited below the detection limit using the NCC at concentration equivalent to MBC, while L. monocytogenes and S. aureus were reduced by 4 log CFU/cm² and 3.5 log CFU/cm², respectively. Although free carvacrol presented better results than encapsulated one in all tests performed, using encapsulated carvacrol could be more interesting for food applications by masking the strong aroma of the compound, in addition to a controlled release of carvacrol. The results suggest that NCC have potential for use in food contact surfaces in order to avoid bacterial adhesion and subsequent biofilm formation.

Efficacy of oregano and rosemary essential oils to affect morphology and membrane functions of noncultivable sessile cells of Salmonella Enteritidis 86 in biofilms formed on stainless steel

AIMS

This study evaluated the efficacy of essential oil from Origanum vulgare L. (oregano; OVEO) and Rosmarinus officinalis L. (rosemary; ROEO) to inactivate sessile cells of Salmonella enterica serovar Enteritidis 86 (SE86) in young and mature biofilms formed on stainless steel.

METHODS AND RESULTS

Ultrastructural alterations and damage in different physiological functions caused by OVEO and ROEO in noncultivable sessile cells of SE86 were investigated using scanning electron microscopy and flow cytometry. OVEO (2·5 μl ml^-1 ) and ROEO (40 μl ml^-1 ) were effective to eradicate young and mature biofilms formed by SE86 sessile cells on stainless steel surfaces; however, the efficacy varied with exposure time. OVEO and ROEO caused alterations in morphology of SE86 sessile cells, inducing the occurrence of bubbles or spots on cell surface. OVEO and ROEO compromised membrane polarization, permeability and efflux activity in noncultivable SE86 sessile cells. These findings show that OVEO and ROEO act by a multitarget mechanism on SE86 membrane functions.

CONCLUSIONS

ROEO and OVEO showed efficacy to eradicate SE86 sessile cells in preformed biofilms on stainless steel, displaying a time-dependent effect and multitarget action mode on bacterial cell membrane.

SIGNIFICANCE AND IMPACT OF THE STUDY

The study provides for the first time the effects of OVEO and ROEO on morphology and physiological functions of noncultivable sessile cells of S. Enteritidis biofilms preformed on stainless steel surfaces.

Novel sensor platform for rapid detection and quantification of coliforms on food contact surfaces

In this paper, a novel sensor platform based on screen printed carbon electrode coated by graphene modified polyacrylamide gel (GR/PAAGC) was developed and implemented for sampling, detection and enumeration of coliform bacteria (coliforms) on food contact surfaces. The optimized formula of polyacrylamide (PAA) and agar-agar increased the adhesive properties of the gel, being crucial for the coliforms recovery, attached to food contact surfaces. The 6-Chloro-3-indoxyl-β-D-galactopyranoside (6-CIGP) was used as a new electrochemical reporter for β-D-galactosidase activity. The released 6,6'-Dichloro-Indigo (6-DI) was directly detected by GR/PAAGC sensor. The presence of Isopropyl-β-D-thiogalactopyranoside (IPTG) and n-Octyl-β-D-thiogalactopyranoside (OBDG) in the gel contributed to reduction of the detection time. The addition of graphene enhanced the voltammetric signal and increased the conductivity of PAA gel. The anodic and cathodic peaks of the released product were directly proportional to the concentration of coliforms. Bacterial cell concentrations ranging from 1.6log₁₀CFU/mL to 6.6log₁₀CFU/mL were detected. Well-shaped, sharp voltammetric curves were generated within 3 h. Redox peaks exhibited good sensitivity with detection limits (LOD) < 0.6log₁₀CFU/mL. After series of optimization experiments, coliforms ranging from 0.6log₁₀CFU/cm² to 6.6₁₀CFU/cm² on stainless steel surfaces have been detected within 30 min with a LOD of 0.1log₁₀CFU/cm². The developed rapid, sensitive, reproducible and specific sensor successfully applied for single detection as well as for real-time monitoring of growth of coliform bacteria on stainless steel surfaces during food processing.