Vacuum-steam pulsed blanching (VSPB) softens texture and enhances drying rate of carrot by altering cellular structure, pectin polysaccharides and water state

Mechanistic understanding of the improved drying characteristics and quality attributes of lily (Lilium lancifolium Thunb.) by modified microstructure after pulsed electric field (PEF) pretreatment

The effects of the non-thermal (pulsed electric field, PEF) and thermal pretreatment (vacuum steam pulsed blanching, VSPB) on the drying kinetics, quality attributes, and multi-dimensional microstructure of lily scales were investigated. The results indicate that both PEF and VSPB pretreatments improved the drying rate compared to untreated lily scales. Specifically, PEF pretreatment reduced the drying time by 29.58 % - 43.60 %, while VSPB achieved a 46.91 % reduction in drying time. PEF treatment facilitated the enhanced leaching of phenols and flavonoids compared to VSPB treated samples, thereby increasing antioxidant activity. The rehydration ratio of the dried lilies was improved with PEF and VSPB treatment, which closely related to the microstructure. Weibull distribution and Page model demonstrated excellent fit for the drying and rehydration kinetics of lily scales, respectively (R2 > 0.993). The analysis of multi-dimensional microstructure and ultrastructure confirmed the variations in moisture migration and phytochemical contents among different treatments. Consequently, this study offers insights into the technological support for the potential of non-thermal pretreatment in fruits and vegetables.

Heat source replacement strategy using catalytic infrared: A future for energy saving drying of fruits and vegetables

Drying is an important process for fruits and vegetables, which requires a lot of heat and the heat sources are mainly coal, electricity, natural gas, and solar energy. Most of the heat is usually wasted due to the long drying process and poor transfer efficiency. The use of coal also pollutes the environment. The national electricity curtailment policy regulates the drying industry. Therefore, the fruits and vegetables drying industry is facing new challenges due to its own development needs and external factors. Catalytic infrared drying (CIR) technology brings solutions to these problems. Compared with other drying technologies, CIR has a high drying efficiency and can effectively reduce the use of electric energy, avoid waste, and minimize pollution of water. However, improper processing conditions still cause quality deficits such as severe browning, and the drying is difficult due to weak infrared penetration. Although CIR has shortcomings, it is still expected to establish an energy-saving and efficient fruit and vegetable drying system.

Sea Buckthorn Pretreatment, Drying, and Processing of High-Quality Products: Current Status and Trends

Sea buckthorn is a kind of berry rich in nutritional and industrial value. Due to its thin skin, juicy pulp, and short shelf life, it is usually preserved via freezing methods or directly processed into sea buckthorn puree after harvest. It can also be dried and processed into products such as dried sea buckthorn fruit, freeze-dried sea buckthorn powder, and sea buckthorn oil. This review, therefore, provides an overview of the existing state of drying and high-quality processing of sea buckthorn. The effects of different pretreatment and drying techniques on the drying characteristics and quality of sea buckthorn and the existing problems of superior-quality processing of sea buckthorn products are summarised. The development trend of sea buckthorn drying methods and the ways to achieve high-quality processing of sea buckthorn products are indicated. These ways are mainly related to the following: (1) The application of combined pretreatment and drying techniques to find a balance between economy, ecology, and efficiency; (2) Introducing new online measurement and control technology into drying equipment; (3) Optimising the existing process to form a complete sea buckthorn industrial chain and develop the sea buckthorn deep-processing industry.

Potential role of cell wall pectin polysaccharides, water state, and cellular structure on twice "increase-decrease" texture changes during kohlrabi pickling process

Pickled kohlrabi is a traditional and favored vegetable product in China. During pickling, the hardness, springiness, and chewiness of kohlrabi all experienced a typical change with twice "increase-decrease" trend. However, little is known about its mechanism. In this study, in situ analysis including immunofluorescence, low field nuclear magnetic, and transmission electron microscopy were used to explore the effects of cell wall pectin, water state, and cellular structure on kohlrabi texture changes during pickling. Results revealed that at the early stage, due to the rapid loss of water after three times salting, the cells shrank and the interstitial space reduced, resulting in the first increase on kohlrabi texture. Subsequently, the dehydration-rehydration caused by the first brine processing resulted in the first decrease on kohlrabi texture. Then under the action of PME enzyme, more low-esterified pectin was produced, and chelate-soluble pectin with more branched structure was further formed, leading to another elevation of the sample texture. As the pickling continued, under the combined action of PG and PME, the molecular weight of pectin was decreased and the rigidity of the cell tissue was destroyed, caused kohlrabi texture continued to decline. These researches could provide important information and guidance for better maintaining the texture of pickled vegetables during processing.

Evaluation of dry microwave and hot water blanching on physicochemical, textural, functional and organoleptic properties of Indian gooseberry (Phyllanthus emblica)

Indian gooseberry (Phyllanthus emblica) is a seasonal and highly nutritious fruit with shorter shelf-life and astringent taste limiting its utilization. The enzymatic browning and flavor loss are major concerns which makes pre-processing a crucial step for further processing. In this context, dry microwave blanching (MWB) was explored as an alternative to hot-water (HW) blanching to reduce its nutrition losses particularly ascorbic acid (AA) and makes it easier for removal of seed kernel. This study focused on the effect of MW power level (200–500 W) and blanching time (50–100 s) on AA content, color attributes (L*, a*, b*), and enzymatic inhibition in Indian gooseberry. The optimized MWB conditions were 294 W MW power with 70 s blanching time providing satisfactory enzymatic inhibition (75.47%), and retention of AA (417.70 mg/100 g pulp) and color attributes (L*: 58.42, a*: 4.57, b*: 26.23). As compared to HWB (80 °C, 5 min), MWB showed least AA degradation, higher total phenolic content and softening percent with less total color difference owing to its shorter processing time and dry blanching. Quantitative descriptive analysis (QDA) demonstrated that raw and MW blanched Indian gooseberries are the most accepted, followed by HW blanched samples. MWB showed better nutrient retention than HWB with easier seed removal showed the application of MW radiation for blanching of other fruits.

Improvement of Pacific White Shrimp (Litopenaeus vannamei) Drying Characteristics and Quality Attributes by a Combination of Salting Pretreatment and Microwave

This study investigated the effects of salting pretreatment and microwave (MW) power on drying characteristics, water distribution and quality attributes of Pacific white shrimp (Litopenaeus vannamei). With increasing salt concentration (0–8%, w/v) and MW power (300–900 W), the drying time of shrimp was shortened by 15.15–28.57%, compared with the untreated samples. Regarding the quality of dried shrimp, increasing the salt concentration and MW power increased the hardness (from 13,073.6 to 24,556.5 g), while the springiness, color parameters and astaxanthin content showed an initial decrease but a later increase trend. Low field nuclear magnetic resonance (LF-NMR) demonstrated that the T₂ curve of the pretreated samples moved toward the negative x-axis and the immobilized water content decreased with increasing salt concentration. E-nose showed that volatile components were different and could be obviously distinguished at different salt concentrations and MW powers. Raman spectroscopy illustrated that the protein secondary structure of dried shrimp was altered by salting pretreatment and drying conditions, and the lowest conversion degree of α-helix to β-sheet of dried shrimp was obtained at the salt concentration of 4% (w/v) and MW power of 500 W. By comprehensively considering the drying time and quality attributes, the combination of 4% (w/v) salt and 500 W MW power was concluded as the best drying conditions for shrimp using a microwave. The results could provide an innovative combination of salt pretreatment and MW drying with suitable processing conditions for producing high-quality dried shrimp.

Enhancing drying efficiency and quality of seed-used pumpkin using ultrasound, freeze-thawing and blanching pretreatments

Effects of blanching (BL), ultrasound (US) and freeze-thawing (FT) pretreatments prior to far-infrared drying (FIRD) on drying characteristics, water distribution, and quality parameters of seed-used pumpkin (SUP) slices were investigated in this study. US, BL and FT pretreatments significantly accelerated drying rate due to the destruction of cell structure. Modified Page model was the fittest model for predicting the FIRD process. Low field nuclear magnetic resonance (LF-NMR) results revealed that T₂ distribution curves of all pretreated samples moved rapidly to the positive x-axis direction, indicating an increase in the rate of water migration. The color of US-FIRD was closer to fresh SUP. BL-FIRD exhibited the highest free polyphenols content (241.28 ± 1.11 mg GAE/100 g DW) and total carotenoids content (129.69 ± 2.49 μg/ g DW), increasing by 45% and 34% respectively compared to the untreated sample.