Dielectric barrier discharge plasma improved the fine structure, physicochemical properties and digestibility of α-amylase enzymatic wheat starch

Pullulanase-assisted bamboo leaf flavonoids optimize the instant properties, in vitro digestibility, and underlying mechanism in yam flour

In this study, pullulanase-assisted bamboo leaf flavonoids (BLF) were employed to ameliorate limitations of fluidity and digestibility of cooked yam flour via physicochemical properties, digestion, structure and interaction analysis. The results showed that 1) Pullulanase-assisted BLF significantly increased the water solubility (9.02% → 69.38%) and inhibited the swelling (5.54 g/g → 2.29 g/g) during heating and cooling of yam flour, causing it to have liquid-like rheological properties (the tanδ tended to 1). 2) Pullulanase and BLF synergistically affected the anti-digestion of yam flour, reducing the estimated glycemic index to a lower level (58.27 → 48.26, dose-dependent of BLF). 3) Pullulanase-assisted BLF mainly interacted hydrophobic with various components, especially starch, increasing the short/long-range ordered structure of starch, changing the secondary structure of proteins, and forming a tight three-dimensional network structure. This study provided a theoretical foundation for the development of functional foods using yam flour and its potential application in liquid foods.

Research on the quantitative relationship of the viscosity reduction effect of large-ring cyclodextrin on potato starch during gelatinization process and mechanism analysis

Starch is extensively used across various fields due to its renewable properties and cost-effectiveness. Nonetheless, the high viscosity that arises from gelatinization poses challenges in the industrial usage of starch at high concentrations. Thus, it's crucial to explore techniques to lower the viscosity during gelatinization. In this study, large-ring cyclodextrins (LR-CDs) were synthesized from potato starch (PS) by using 4-α-glucanotransferase and then added to PS to alleviate the increased viscosity during gelatinization. The results from rapid viscosity analyzer (RVA) demonstrated that the inclusion of 5 % (w/w) LR-CDs markedly reduced the peak viscosity (PV) and final viscosity (FV) of PS by 49.85 % and 28.17 %. In addition, there was a quantitative relationship between PV and LR-CDs. The equation was fitted as y = 2530.73×e-x/2.48+1832.79, which provided a basis for the regulation of PS viscosity. The mechanism of LR-CDs reducing the viscosity of PS was also studied. The results showed that the addition of LR-CDs inhibited the gelatinization of PS by enhancing orderliness and limiting water absorption, resulting in a decrease in viscosity. This study provides a novel method for reducing the viscosity of starch, which is helpful for increasing its concentration and reducing energy consumption in industrial applications.

Effects of plasma-activated water combined with ultrasonic treatment of corn starch on structural, thermal, physicochemical, functional, and pasting properties

In this study, corn starch was used as the raw material, and modified starch was prepared using a method combining plasma-activated water and ultrasound treatment (PUL). This method was compared with treatments using plasma-activated water (PAW) and ultrasound (UL) alone. The structure, thermal, physicochemical, pasting, and functional properties of the native and treated starches were evaluated. The results indicated that PAW and UL treatments did not alter the shape of the starch granules but caused some surface damage. The PUL treatment increased the starch gelatinization temperature and enthalpy (from 11.22 J/g to 13.13 J/g), as well as its relative crystallinity (increased by 0.51 %), gel hardness (increased by 16.19 %) compared to untreated starch, without inducing a crystalline transition. The PUL treatment resulted in a whitening of the samples. The dual treatment enhanced the thermal stability of the starch paste, which can be attributed to the synergistic effect between PAW and ultrasound (PAW can modify the starch structure at a molecular level, while ultrasound can further disrupt the granule weak crystalline structures, leading to improved thermal properties). Furthermore, FTIR results suggested significant changes in the functional groups related to the water-binding capacity of starch, and the order of the double-helical structure was disrupted. The findings of this study suggest that PUL treatment is a promising new green modification technique for improving the starch structure and enhancing starch properties. However, further research is needed to tailor the approach based on the specific properties of the raw material.

Effect of dielectric barrier discharge (DBD) plasma treatment on physicochemical and 3D printing properties of wheat starch

In recent years, the focus has shifted towards carbohydrate-based hydrogels and their eco-friendly preparation methods. This study involved an investigation into the treatment of wheat starch using dielectric barrier discharge (DBD) plasma technology over varying time gradients (0, 2, 5, 10, 15, and 20 min). The objective was to systematically examine the impact of different treatment durations on the physicochemical properties of wheat starch and the suitability of its gels for 3D printing. Morphology of wheat starch remained intact after DBD treatment. However, it led to a reduction in the amylose content, molecular weight, and crystallinity. This subsequently resulted in a decrease in the pasting temperature and viscosity. Moreover, the gels of the DBD-treated starch exhibited superior 3D printing performance. After a 2-min DBD treatment, the 3D printed samples of the wheat starch gel showed no significant improvements, as broken bars were evident on the surface of the 3D printed graphic, whereas DBD-20 showed better printing accuracy and surface structure, compared to the original starch without slumping. These results suggested that DBD technology holds potential for developing new starch-based gels with impressive 3D printing properties.

Effect of atmospheric pressure plasma jet on the structure and physicochemical properties of wheat starch

The effect of atmospheric pressure plasma jet (APPJ) with different discharge power (0, 400, 600, and 800 W) on the structure and physicochemical properties of wheat starch were evaluated in this study. After APPJ treatments, significant declines in peak viscosity, breakdown viscosity, and final viscosity of wheat starch pasting parameters were observed with increase of plasma treatment power. Being treated with discharge power of 800 W, the PV and BD value of wheat starch paste significantly dropped to 2,578 and 331 cP, respectively. Apparently, APPJ could raise the solubility of wheat starch, while reduce the swelling capacity, and also lower the G' and G″ value of wheat starch gel. Roughness and apparent scratch was observed on the surface of the treated wheat starch granules. Although APPJ treatment did not alter wheat starch's crystallization type, it abated the relative crystallinity. APPJ treatment might be useful in producing modified wheat starch with lower viscosity and higher solubility.

Fine molecular structure and digestibility changes of potato starch irradiated with electron beam and X-ray

The change of digestibility of starch irradiated with different types from the perspective of fine structure is not well understood. In this work, the change of internal structure, molecular weight and chain-length distribution, helical structure, lamellar structure, fractal structure and digestibility of native and treated potato starch with electron beam and X-ray was analyzed. Two irradiations caused the destruction of internal structure, the disappearance of growth rings and increase of pores. Irradiation degraded starch to produce short chains and to decrease molecular weight. Irradiation increased double helical content and the thickness and peak area of lamellar structure, resulting in the reorganization of amylopectin and increase of structure order degree. The protected glycosidic linkages increased starch resistance to hydrolase attack, thereby enhancing the anti-digestibility of irradiated starch. Pearson correlation matrix also verified the above-mentioned results. Moreover, X-ray more increased the anti-digestibility of starch by enhancing ability to change fine structure.

Effect of high voltage dielectric barrier discharge (DBD) atmospheric cold plasma treatment on physicochemical and functional properties of taro (Colocasia esculenta) starch

The goal of the proposed study is to investigate the effects of three different power levels (30, 32 and 34 kV) and exposure time (2, 4 and 8 min) of dielectric barrier discharge (DBD) atmospheric cold plasma treatment on the functional and physicochemical characteristics of taro starch. Investigations were done into how different treatments impact the multi-structural, functional and physicochemical attributes of taro starch. The findings showed that cold plasma treatments substantially impacted starch granule shapes (3.60-2.54 μm), such as reduced aggregations and developed fissures on granule surface due to the generation of an etching by plasma species and enhancement in the surface topography and roughness of treated starch as compared with native by SEM and AFM analysis. Besides this, no variations were detected in the functional groups of taro starch using FT-IR analysis after cold plasma treatments. However, the A-type pattern in the XRD did not affect it, while a reduction in relative crystallinity (14.20-11.50 %) was seen as a function of the active plasma species depolymerization. Furthermore, depending on the cold plasma voltage and treatment time, amylose content (20.12-15.98 %), paste clarity (24.48-31.27 %), solubility (0.41-65.53 %), freezing thaw stability (% syneresis) (32.10-42.58 %), color properties (L*, 94.79-97.52), whiteness index (79.37-84.66), molecular weight distribution (Peak 1, 12.79-5.35 × 108 g/mol; Peak 2, 4.20-1.56 × 107 g/mol) and in vitro digestibility (RDS, 64.10-64.08 %) significantly changed. So, based on these excellent properties, this study suggested that cold plasm-treated taro starch can be used in the field of food packaging material, functional food and pharmaceutical products. Therefore, a potential approach for physically altering starch is plasma treatment.

Comprehensive review on single and dual modification of starch: Methods, properties and applications

Starch is a natural, renewable, affordable, and easily available polymer used as gelling agents, thickeners, binders, and potential raw materials in various food products. Due to these techno-functional properties of starch, food and non-food industries are showing interest in developing starch-based food products such as films, hydrogels, starch nanoparticles, and many more. However, the application of native starch is limited due to its shortcomings. To overcome these problems, modification of starch is necessary. Various single and dual modification processes are used to improve techno-functional, morphological, and microstructural properties, film-forming capacity, and resistant starch. This review paper provides a comprehensive and critical understanding of physical, chemical, enzymatic, and dual modifications (combination of any two single modifications), the effects of parameters on modification, and their applications. The sequence of modification plays a key role in the dual modification process. All single modification methods modify the physicochemical properties, crystallinity, and emulsion properties, but some shortcomings such as lower thermal, acidic, and shear stability limit their application in industries. Dual modification has been introduced to overcome these limitations and maximize the effectiveness of single modification.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Hierarchical structural modification of starch via non-thermal plasma: A state-of-the-art review

The hierarchical architecture of natural and processed starches with different surface and internal structures determines their final physicochemical properties. However, the oriented control of starch structure presents a significant challenge, and non-thermal plasma (cold plasma, CP) has gradually been used to design and tailor starch macromolecules, though without clear illustration. In this review, the multi-scale structure (i.e., chain-length distribution, crystal structure, lamellar structure, and particle surface) of starch is summarized by CP treatment. The plasma type, mode, medium gas and mechanism are also illustrated, as well as their sustainable food applications, such as in food taste, safety, and packaging. The effects of CP on the chain-length distribution, lamellar structure, amorphous zone, and particle surface/core of starch includes irregularity due to the complex of CP types, action modes, and reactive conditions. CP-induced chain breaks lead to short-chain distributions in starch, but this rule is no longer useful when CP is combined with other physical treatments. The degree but not type of starch crystals is indirectly influenced by CP through attacking the amorphous region. Furthermore, the CP-induced surface corrosion and channel disintegration of starch cause changes in functional properties for starch-related applications.

Multiscale structure-property relationships of oxidized wheat starch prepared assisted with electron beam irradiation

In this study, two promising eco-friendly modification techniques, electron beam (EB) irradiation and hydrogen peroxide (H₂O₂) oxidation, were used to prepare oxidized wheat starch. Neither irradiation nor oxidation changed starch granule morphology, crystalline pattern, and Fourier transform infrared spectra pattern. Nevertheless, EB irradiation decreased the crystallinity and the absorbance ratios of 1047/1022 cm^-1 (R_1047/1022), but oxidized starch exhibited the opposite results. Both irradiation and oxidation treatments reduced the amylopectin molecular weight (Mw), pasting viscosities, and gelatinization temperatures, while increasing the amylose Mw, solubility and paste clarity. Notably, EB irradiation pretreatment dramatically elevated the carboxyl content of oxidized starch. In addition, irradiated-oxidized starches displayed higher solubility, paste clarity, and lower pasting viscosities than single oxidized starches. The main reason was that EB irradiation preferentially attacks the starch granules, degrades the starch molecules, and depolymerizes the starch chains. Therefore, this green method of irradiation-assisted oxidation of starch is promising and may promote the appropriate application of modified wheat starch.

Physicochemical characterizations of five Dioscorea alata L. starches from China

D. alata is an important edible and medicinal plant in China. Its tuber is rich in starch but the understanding of the physiochemical properties of D. alata starch is limited. In order to explore the processing and application potential of different D. alata accessions in China, five kinds of D. alata starch (LY, WC, XT, GZ, SM) were isolated and characterized. The study showed that D. alata tubers contained abundant starch, enriched in amylose and resistant starch (RS). D. alata starches showed B-type or C-type diffraction pattern, had higher RS content and gelatinization temperature (GT), lower fa and viscosity when compared to D. opposita, D. esculenta, and D. nipponica. Among D. alata starches, D. alata (SM) showing the C-type diffraction pattern, had the lowest proportion of fa with 10.48 %, the highest amylose, RS2 and RS3 content of 40.24 %, 84.17 % and 10.48 % respectively, and the highest GT and viscosity. The results indicated that D. alata tubers are potential sources for novel starch with high amylose and RS content, and provided a theoretical basis for further utilizations of D. alata starch in food processing and industry application.

Porous corn starch obtained from combined cold plasma and enzymatic hydrolysis: Microstructure and physicochemical properties

The combined effect of cold plasma treatment and enzymatic hydrolysis was investigated on the physicochemical and microstructural properties of porous corn starch. Scanning electron microscopy (SEM) images depicted that the combined treatment led to the creation of deeper pores on the surface of starch granules. The combined treatment indicated the highest swelling power (19.49 g/g), solubility (10.08 %), specific surface area (2.97 m²/g) and total pore volume (10.47 cm³/g). According to the X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC), the combined treatment, compared with the enzymatic hydrolysis, decreased the starch crystallinity, the order of the double-helix structure, and the starch gelatinization enthalpy. The rapid visco analyzer (RVA) pasting profile revealed that the combined treatment elevated the breakdown and setback viscosities. This study indicated that cold plasma pretreatment, as a green non-thermal technology, facilitated the performance of enzymes, resulting in the production of a porous starch with a higher absorption capacity.

Effects of Wheat Tempering with Slightly Acidic Electrolyzed Water on the Microbiota and Flour Characteristics

Slightly acidic electrolyzed water (SAEW) was prepared and used as wheat tempering water. This study explored the impacts of tempering with SAEW on microbial load and diversity and quality properties of wheat flour. As SAEW volume ratio increased, the residual level of total plate counts (TPC) and mould/yeast counts (MYC) decreased dramatically (p < 0.05). Based on genomics analysis, bacterial 16S rRNA gene and fungal ITS1 gene region were performed to characterize the changes in microbial communities’ composition and diversity in response to SAEW treatment. SAEW optimal volume ratio (6.5:10, v/v) of SAEW with distilled water influenced wheat microbiome composition, with a higher microbial diversity and abundance discovered on the control grains. Bacteroidetes of predominant bacterial phylum and Ascomycota of the most abundant fungal phylum were reduced after SAEW optimal volume ratio tempering. The flour yield is higher and ash content is lower than the control samples. Falling number and “b*” in terms of colour markedly increased. DSC (Differential Scanning Calorimetry) test showed that To (onset temperature), Tp (peak temperature), and Tc (conclusion temperature) were significantly decreased in thermal characteristics of flour. Gluten content, protein content, ΔH and pasting properties tests showed no significant change. It can be concluded that SAEW should be applied on wheat tempering for producing clean wheat flour. ANOVA and Tukey’s honestly significant difference (HSD) test were used for the analysis of variance and differences between the experimental and control groups, with p < 0.05.